Changes needed with different client.

Hi,
we are using FILE,IDOC,JMS MQ ,ABAP Proxy and See burger adapters with sender and receiver aswell.
we are using Master SLD ..I mean single SLD.
Client has asked for testing the interfaces...
we are using
XI box with client as 200
R3 box with client as 217.
All the connections are done with R3 client 217.
No my problem is...
My client has asked to test my interfaces with R3 client 216.
what are the changes i need to change in XI for R3 client 216....please let me know

Hi,
The Following things needs to be take care in this Activity
1) No Need to create Another TS for SAP R/3, this will not allow you to create another one.
2) Just Add the Business system for the Existing TS with Client 216 and also take care abt the Logical System Name here.
3) Refresh SLD Data Cache in IDEnvironment-
4) Now Use this New Business System for Communication which is having the New Client and Corresponding LS Name
REgards
Seshagiri

Similar Messages

Basis Changes possible with prod client set to "no changes"

Hi SAP Basis Experts
I am busy with an internal security review of a client's SAP Environment and I experienced a query from the client side regarding a finding on SAP Basis Changes - an area I'm not too well versed in. The Client's Change procedures require all changes to be requested by logging it in a notification screen and the classification of the SAP changes according to it being either, small, normal, emergency or basis changes.
Should the change be classified as basis changes, it bypasses their security procedures and no authorisation is required for the implementation thereof, it seems, straight into the production environment.
The Client has the following settings
Their Global Security Setting (SE06) is set to "Modifiable"
Cross Client Obj Changes for the Production Client (SCC4) is set to "No changes to repository and cross client customising objs"
The person performing the basis changes has a development key in the production client (DEVACCESS) along with two others.
Other than a myriad of security shortcomings my question is this:
The Basis Administrator argues that he can not make changes to the production environment due to the the "No changes..." setting even if he does have a Developer key.
1) Is this correct?
2) What further reports can I ask to validate that this administrator can not make changes without due authorisation?
3) Is there a report that details which users can make changes to the Client Settings (SCC4)
Thank you for the assistance!
Jacques du Plessis

Hi,
The Following things needs to be take care in this Activity
1) No Need to create Another TS for SAP R/3, this will not allow you to create another one.
2) Just Add the Business system for the Existing TS with Client 216 and also take care abt the Logical System Name here.
3) Refresh SLD Data Cache in IDEnvironment-
4) Now Use this New Business System for Communication which is having the New Client and Corresponding LS Name
REgards
Seshagiri

Calling a ESS WDJ COmponent with different Client no

Hi,
my task is to make ESS available on a different Client (100) instead of 001.
i was reading about the "Mapping Logical Systems" using the parameter sap-wd-arfc-useSys :
http://help.sap.com/saphelp_nw70/helpdata/en/af/84a34098022a54e10000000a1550b0/content.htm
I did the following :
1. Create a new JCODestination :
SAP_R3_HumanResources_MetaDataHNL and SAP_R3_HumanResourcesHNL with the new client.
2. Call the URL
http://<portal>:<port>/webdynpro/dispatcher/sap.com/ess~lea/com.sap.xss.hr.lea.appl.LeaveRequest?sap-wd-arfc-
useSys=SAP_R3_HumanResources:HNL&sap-wd-arfc-useSys=SAP_R3_HumanResources_MetaData:HNL
Result : i get a 500 internal Server error after the login for this client.
Test 2: The same with the default JCO Destinations : same error
Test 3: The same without the additional parameter : working
The JCO Destination is only SAP_R3_HumanResources when i looked it up the Content Admin Area for Web Dynpro.
What is the point i am missing ? Has someone done it successfully to connect to 2 systems per sap-wd-arfc-useSys ?
Regards,
Kai

Hi Arun,
the JCODestination Tests (Metadata) are successful.
The Assignment for ess~lea is only for :
SAP_R3_HumanResources
SAP_R3_HumanResources_MetaData
It is a standard ESS iview. How and why should i assign additional JCODestinations ?
I overweite it per parameter sap-wd-arfc-useSys
Regards,
Kai

Dev qas and prd set up with different clients

good day experts,
If I have 3 different clients in PRD, is it recommended to have 3 qas and 3 dev clients as well? For instance, 3 clients in PRD which are 500, 510, and 520; do I have to have 300,310,320 for qas and 200, 210, and 220 for dev? for we have difference configurations and settings on difference clients.
Please suggest! Thank you in advance!

Hi,
It is not mandatory that you have three clients in all system. General approach is as below:
1) Development System- Sandbox Client, Development Client, Golden Master Client
2) Quality System- Testing Client, Pre-Production client (not require always)
3) Production System- One Production Client (If there is any special requirement then you can create more client)
Thanks
Sunny

Trusted connectivity with different Clients

Hi all
I have the following problem: The Trusting System SRR (Server) has client 100 and 010 the
Trusted System CLL has client 010.
I tried to make a trusted connectivity with the SRR 100 Client, but Im only able to connect to the SRR 010 Client.
Where can declare to which Client of the Trusting System (Server) the Trusted System (client) Points?
Tnx for your help
Murat

Hi
I solved the problem.
if the Client is not the same you see in the trusted system in RFC menu trusting system an error. "authorization failed". (this was confusing)
You have to create in the Trusting system the authorization object S_RFCACL with the client information for the calling System. You verify the settings with the function module AUTHORITY_CHECK_TRUSTED_SYSTEM.
Once you created the trusted system in the Trusting system. You have to create a NEW RFC connection in the Trusted System for example <SID>_TRUST mark the trusted system and current user with the Client# information. Once saved, try to logon by the "Remote Logon" button. If this works, then you created successfully the trust relationship.
Thanks<u> <i>Wolfgang for the Note you mentioned</i>.</u> I checked that Note before.What I didn't know that the Message in RFC menu Trusting System authorization failed can be ignored since it tries to logon with the current logged on client.
Murat

IPad 2 suddenly showing "no service" but seems to be working fine otherwise. Any need for concern? Hard close didn't help. Changing locations with different wi if servers didn't help.

iPad 2 suddenly showing "no service" but seems to be working fine otherwise. Any cause for concern? Time to get a new iPad?

It is not picking up the wifi - though it says it is connected . All other devices are connecting fine to the same network

Is there a way to automatically change tabs with different times set for each tab?

I found a few add-ons that will automatically change tabs based on a configurable time. But all the tabs use the same time setting. What I need is the ability to have tabs displayed for different amounts of time. Ex, Tab 1 for 30 seconds, Tab 2 for 10 seconds, Tab 3 and 4 for 5 seconds. Ideally, I will have the ability to modify these settings as the amount of tabs and the content will change a couple times a week.
Currently I'm using Tab Slideshow with each tab displayed for 15 seconds. But it sounds like Tab Rotate and Auto Toggle Tabs essentially do the same. If there is already a solution that would be great but if not is there someone available for hire to help modify one of the existing add-ons? Thank you in advance for your time.
John

Currently Firefox don't have any options like that.
You can ask the Addon developers
*http://addons.mozilla.org/

Connecting BW with different clients in CRM Server.

Hi All,
We have one CRM Server and one BW Server.
In CRM Server, we have 3 Clients.
CRM 100, CRM 200 and CRM 300.
And in BW, we have one Client BW 200.
During the development of reports, we have connected CRM 200 with BI 200.
Development of CRM reports are done.Right now CRM 100, holds the quality data and client wants to link CRM 100 with BI 200.
Steps we have done while connecting CRM 100 with BI200.
1. All the requests available in CRM 200 are visible in CRM 100.So We have created the RFC connection between CRM 100 and BW 200.
2. Replicated all the data sources from CRM 100 to BW 200
3. After replication, the link between Data source and Info source is not available.
4. So we have installed manually the Transfer rule from CRM100 data source to Info source through business Content.
Please suggest, whether this is a right way or is there any other way to automate the linking of CRM 100 with BW200 for all info Objects.
Thanks,
Ram.

Many solutions, common is create OU for Members (or Users), inside, more OU's (one for managers & one for regular users).
Next use Group Policy Editor to create separate policies for each OU (one for managers & one for regular users).
This is Just a start and suggestion.
Please do not delete any Operating System created OU's or groups!
W.Maxx MCITP MCSE MCSA MCP 2k8 2k3 2k nt4 AD, Exchange, DNS, msProject, SharePoint IBM iSeries RIM blackberry

Using SAP Business content with different client number

Hi,
I want to use and upload client numbers into SAP BW in an InfoObject as master data.
The client number is for example with 9 figures.
Can I use the SAP standard InfoObject 0Client for that or is there another one or should I define my own InfoObject?
Thank you!

You can do it in both the ways.

Help Needed With Basic Client/Server App

I was wondering if anyone can help with a simple blackjack client/server application i've been writting (basically its a moddified chat application). The problem i'm having seems to lie within the connection management i've written.
What i'm trying to get is that only 4 players can connect at one time and that each player takes a turn (which i've implemented using threads) to play their hand (as you would if you were playing it for real). The problem is that it will allow the players to connect, but oddly enough, it will not allow a new transaction to be created (i.e. allow a player to take their turn) until 2 players have connected.
Even when it does create the transaction, after taking input from the client once, the server seems to stop doing anything without any error message of any kind.
Its really annoyed me now, so you guys are my last hope!
The code can be found in full here:
Client Application: http://stuweb3.cmp.uea.ac.uk/~y0241725/WinEchoClient.java
Server Application: http://stuweb3.cmp.uea.ac.uk/~y0241725/ThreadServer.java
Card Class: http://stuweb3.cmp.uea.ac.uk/~y0241725/Card.java
Deck Class: http://stuweb3.cmp.uea.ac.uk/~y0241725/Deck.java
Please feel free to play around with this code as much as you feel necessary!

(one last bump back up the forum before i give up on this completely)

"Table" changes locations with different browsers

The the body of my website is a JPEG, and I have a table that contains a form. I am trying to line up the form with the text that is in the background, but when I get it right looking in one browser, it is completely wrong in another.
Any advice on how to fix this would be greatly appreciated! The specific website is: http://www.high-road.org/contact.html
Here is my code..
<meta name="description" content="High Road is a Christian Celtic Music Group based in Memphis, TN.">
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
<title>Untitled Document</title>
<style type="text/css">

</style>
<script language="JavaScript" type="text/JavaScript">

</script>
</head>
<body onLoad="MM_preloadImages('IMAGES/menubarroll_2.jpg','IMAGES/menubarroll_3.jpg','IMAGES/me nubarroll_4.jpg','IMAGES/menubarroll_5.jpg','IMAGES/menubarroll_6.jpg','IMAGES/menubarroll _7.jpg')">
<table width="800" height="1293" border="0" align="center">
<tr>
    <td height="1289" valign="top" background="IMAGES/contactmain.jpg" bgcolor="#E8E8E8"><p><img src="IMAGES/header.jpg" width="800" height="365"><br>
      <img src="IMAGES/menubar_1.jpg" width="64" height="50"><a href="index.html" onMouseOut="MM_swapImgRestore()" onMouseOver="MM_swapImage('Menu_Home','','IMAGES/menubarroll_2.jpg',1)"><img src="IMAGES/menubar_2.jpg" name="Menu_Home" width="105" height="50" border="0"></a><a href="about.html" onMouseOut="MM_swapImgRestore()" onMouseOver="MM_swapImage('Menu_About','','IMAGES/menubarroll_3.jpg',1)"><img src="IMAGES/menubar_3.jpg" name="Menu_About" width="104" height="50" border="0"></a><a href="media.html" onMouseOut="MM_swapImgRestore()" onMouseOver="MM_swapImage('Menu_Media','','IMAGES/menubarroll_4.jpg',1)"><img src="IMAGES/menubar_4.jpg" name="Menu_Media" width="105" height="50" border="0"></a><a href="schedule.html" onMouseOut="MM_swapImgRestore()" onMouseOver="MM_swapImage('Menu_Schedule','','IMAGES/menubarroll_5.jpg',1)"><img src="IMAGES/menubar_5.jpg" name="Menu_Schedule" width="140" height="50" border="0"></a><a href="contact.html" onMouseOut="MM_swapImgRestore()" onMouseOver="MM_swapImage('Menu_Contact','','IMAGES/menubarroll_6.jpg',1)"><img src="IMAGES/menubar_6.jpg" name="Menu_Contact" width="126" height="50" border="0"></a><a href="store.html" onMouseOut="MM_swapImgRestore()" onMouseOver="MM_swapImage('Menu_Store','','IMAGES/menubarroll_7.jpg',1)"><img src="IMAGES/menubar_7.jpg" name="Menu_Store" width="86" height="50" border="0"></a><img src="IMAGES/menubar_8.jpg" width="68" height="50"><br>
    </p>
      <p> </p>
      <p> </p>
      <p> </p>
      <p><br>
        <br>
        <br>
      </p>
      <table width="85%" border="0">
        <tr>
          <td width="676" align="right" valign="top"><div align="right">
            <p><br>
            </p>
            <form action="process.php" method="post" enctype="multipart/form-data" name="" id="">
              <p>
                <input name='Name' type=text class="style1" id="Name" size="30">
                <br>
                <br>
</p>
              <p>
                <input name='Email' type=text class="style1" id="Email" size="30">
              </p><p align="right"><br>
                <br>
                <textarea name="Comments" cols="28" rows="8" class="style1" id="Comments"></textarea>
                  <br>
                  <br>
                  <br>
              </p>
              <p>                  <input name='Location' type=text class="style1" id="Location" size="30">
              </p>
              <p>                  <input type=submit class="style5" value='Submit Form'>
                </p>
            </form>
            </div></td>
        </tr>
      </table>
      <br>
      <p> </p>
    </td>
</tr>
</table>
</body>
</html>

I'm afraid that it's never going to work. What you're attempting is akin to nailing jelly to a wall.
Just focus on creating a simple functional form and style it with CSS.
Other comments:
Do you realize that you're doing the website a disservice by making all the text of the website part of a huge (300KB+) JPG?
The top photo with the people looks great but the entire website will be slow and invisible to search engines due to the background JPG e.g. there's no text content on the pages.
I understand the intent of the design in trying to convey Celtic colours and fonts but it's not the best approach for a website which Google can see and potential visitors can find online. In addition, it's inaccessible to vision impaired users who cannot change colours or resize text due to the JPG and maintenance will be tough since you have to recreate the images every time.
Use a DW template, keep the colour theme and group photo, drop the background JPG with embedded Celtic font and use CSS-styled text wherever possible.

Changing charts with different sets of data

Hi Guys,
I have created a dashboard (BO 4.1) with a Summary view. It contains 5 charts.
One of the column charts gives monthly project count. The data is coming from a Webi cross tab (Live Office) as shown below.
The highlighted yellow cells is the source data for the chart.
Product
Emp Type
Jan
Feb
Mar
A
X
1
2
3
A
Y
1
2
3
B
X
1
2
3
C
X
1
2
3
C
Y
1
2
3
Total:
5
10
15
Now, there is a check box that the user clicks that opens up a "List Builder" component where the user gets to select the "Product".
Based on the "Product" selection, I want the column chart to display the respective data from the table above.
Could anyone help me achieve this in the most efficient way?
Note -
Later, I also want to add a "Radio Button" for "Emp Type" and another "List Builder" for "Month". So, total 3 selectors. The other charts have their own sets of data.

Hey jeewan,
If i understood your question properly its all about the axis value of month & totals invariable product & employee. In this case remove the totals coming from the webi report. create a sum formula 30 rows below. But make sure how many records you will comsuming at the maximu level if you include all the values in the list builder and then decide where to right this sum formula. Now pick the month from the top and total from cells where you have written the sum formula.
Got it, does it helps!!!

I need to update my apps in the App Store, but when i try to update, the Sign Up Apple ID pop up box came out with different Apple ID. How can I change it to mine? My iTunes Store already login with my own Apple ID.

I need to update my apps in the App Store, but when i try to update, the Sign Up Apple ID pop up box came out with different Apple ID. How can I change it to mine? My iTunes Store already log in with my own Apple ID.

Just now you said the other Apple ID stored inside it, is that mean all my data back up in that the other ID?

Mass changes of Material Master field with different values

Hi,
How to change a field in Material Master for more than thousand materials. I think MM17 can only be used for mass changes of materials with same values. I need to upload different values for different materials. Is there any other way to do this.
Thanks,
K R Vishnu Kumar

Hi Kumar.
I think you have to use LSMW for mass updation for Material Master fields with different values.
Regards,
Rahul.

Dynamic CRM connect outlook Client with different domain

Hi Guys,
I had installed CRM 2011 in cloud with different domain.
If I use browser is working fine just that when i use Outlook client it show
15:24:16| Error| Exception : The request for security token could not be satisfied because authentication failed. at System.ServiceModel.Security.SecurityUtils.ThrowIfNegotiationFault(Message message, EndpointAddress target)
at System.ServiceModel.Security.SspiNegotiationTokenProvider.GetNextOutgoingMessageBody(Message incomingMessage, SspiNegotiationTokenProviderState sspiState)
I found that is because you must connect to the same domain.
any idea that i can use my Outlook client to connect to CRM 2011 without changing my domain?
Regards,
Kim

Yes - I've been scarred with this for many years :(
If it is just CAS 1 that is causing issues, then focus in on that. The support statement for Win 2008 R2 is that NLB is still a 3rd party component and support may ask for it to be disabled.
http://support.microsoft.com/kb/278431
Does CAS1 and CAS2 have the same NICs (firmware as well), driver, teaming software, and teaming config?
I also want to ask what the network team did for configuring the switch ports on the servers? This will vary from vendor to vendor - did they do the same config on both?
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter:   LinkedIn:
  Facebook:
  XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.
Thanks Rhoderick, issue still persists
can you also help clarify what you meant by "configuring the switch ports on the servers"?
thanks again

Changes needed with different client.

Similar Messages

Maybe you are looking for