Changes not immediately viewable when updating portlet related jsps

Hello,
I recently installed the 4.0 portal server and I set up a new portal based on
the following doc:
http://edocs.bea.com/wlp/docs40/portal/devbasic.htm
When I modify one of the jsps that a portlet uses, the changes (when viewed in
a browser) will show up somewhere between immediately and 5 minutes later. I
thought this might have something to do with the "Reload Period" which is modifiable
within the server console, for my portal web application. So, I modified it from
300 to 0, but it still doesn't update right away. Is this "reload period" the
problem? Any other suggestions?
Thanks for any help,
Kevin

I would suggest that this be made a configuration parameter on the server console.
I would not expect to have to go rooting around in the xml config files for something
that (IMHO) as useful as this.
"Peter Laird" <[email protected]> wrote:
>
Kevin,
I'm glad you found your solution.
This is a common problem. People often wonder why it is not set to a
low number
after an install, since most people will go into development with it.
The problem
is that historically there have been a number of customers who downloaded
the
eval copy, ran huge load tests on the out-of-the-box sample, and then
concluded
the product was too slow. The reason was that the product was configured
for development
(so the server would check the file system for every JSP of every request)
and
thus would not perform well at all. Therefore around version 3.2, the
default
for all settings was switched to favor production and not development.
PJL
"Kevin" <[email protected]> wrote:
Problem solved...the weblogic.xml file has to be modified...look for:
pageCheckSeconds
I changed mine to 1...
"Kevin" <[email protected]> wrote:
Hello,
I recently installed the 4.0 portal server and I set up a new portal
based on
the following doc:
http://edocs.bea.com/wlp/docs40/portal/devbasic.htm
When I modify one of the jsps that a portlet uses, the changes (when
viewed in
a browser) will show up somewhere between immediately and 5 minuteslater.
I
thought this might have something to do with the "Reload Period" which
is modifiable
within the server console, for my portal web application. So, I modified
it from
300 to 0, but it still doesn't update right away. Is this "reload
period"
the
problem? Any other suggestions?
Thanks for any help,
Kevin

Similar Messages

  • HT201210 what does firmware file not compatible mean when updating iphone software?

    what does firmware file not compatible mean when updating software on iphone?

    Make sure your iTunes is up to date
    Help > Check for updates

  • Music does not sync properly when updated to latest version.  Can see computer but can't play from ipod

    Music does not sync properly when updated to latest version.  Can see on computer but can't play from ipod.

    Hope this helps...
    I was having the same problem where only 1.7GB of 10GB of selected music would sync so I decided to start fresh.  The following steps worked for me:
    1.  Open itunes and connect iphone 5 if not already.  Uncheck all playlists, artists, etc. till nothing is checked to sync.  Then uncheck the sync music box so that all music will be removed from the phone.  Sync iphone
    2.  Eject device. Quit itunes (don't just close). unplug iphone.
    3.  Restart imac, macbook, or PC.
    4.  Restart iphone.
    5.  Now after power up, restart itunes then plug in iphone, check sync music and select music to sync.  Sync iphone
    6.  It worked for me!!!  Good luck.

  • When I update to the latest version I cannot access the add-ons page or request help because neither page will load. My Weather channel add-on was NOT piced up when updating to the latest version. Why problems with improved latest version?

    I have twice downloaded the latest version in the last month. Each time I encountered the same problems. the Weather Channel add-on I have did NOT appear in the latest version. When I tried to access the Add-Ons page under the Tools header it would not load. When I tried to contact Mozilla from the Help header it would not load
    When I open a web page from Bookmarks it is painfully slow to load.
    This is NOT an improved version. I have been using Firefox for years without problems; I prefer it to Internet Explorer. However the latest 'improved' version may change my mind.

    The problem is that the Add-ons Manager tab when opened the first time, is on "Get Add-ons" section and that must be downloaded from the Add-ons server which might be overburdened.
    * If you need to look for new Add-ons, go directly to the Add-ons site -> https://addons.mozilla.org/en-US/firefox/
    Perform the suggestions mentioned in the following articles:
    * [https://support.mozilla.com/en-US/kb/Template:clearCookiesCache/ Clear Cookies & Cache]
    * [[Add-ons are disabled after updating Firefox#w_check-for-new-versions-of-your-add-ons|Check for New versions of your Add-ons]]
    Check and tell if its working.
    Not related to your problem but some of your Plugins are out-dated
    * Update All your Firefox Plugins -> [https://www.mozilla.org/en-US/plugincheck/]
    * '''When Downloading Plugins Update setup files, Remove Checkmark from Downloading other Optional Softwares with your Plugins (e.g. Toolbars, McAfee, Google Chrome, etc.)'''

  • No change log is created when updating the customer master using LSMW

    Hi Gurus,
         I am a bit confused on why no change log is created when I use the LSMW to update the customer master. What I update is the customer partner of the customers. For example I have a sold-to 1000 then a customer representative (Z3) 50001, now when I use the LSMW to change the customer representative to 50002 it is correctly updated however no change log is found if you check for the changes on that specific customer. This is a bother for me since I want to send all the customer changes through IDOC and the processing needs to access the change log.
    Thank you.

    Hello,
    What process are you using object, BAPI, etc.
    Regards
    Waza

  • How do you change the iTunes ID when updating apps? 3 people use the same iPad with different iTune IDs.

    When trying to update apps on iPad2, someone elses iTunes ID is already showing when it asks for a password. (all in the family)
    How do I change to my iTunes ID? I checked settings &amp; it is correct there.

    Go to Settings>Store>Apple ID - tap on the ID to sign out of that one. Then tap Sign in to sign in with another ID.
    If you have problems switching the ID's you may want to restart the iPad before you sign in with the new ID.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Doesn't it get confusing using 3 ID's on one iPad?

  • Notes App Crashes when Update Teared-off iCloud Notes on iDevices

    This is not a question, but a bug.
    After I tear-off a note (double-clicked the note from the list) from the Notes app with iCloud enabled, and then edit it on iPhone (iOS6.0.1), 2 problem occurred:
    1. The updates will NOT show on the tear-off piece; however, they show on the one on the Notes app screen;
    2. When I try to close the tear-off note (using the usual red cross icon at the upper-left), the Notes app crashes.
    I guess this issue is due to incomplete design of the sync flow of Notes via iCloud. The reason being that when I update the note on Mac with the same note opened on iPhone, the Notes app on iPhone had to force close the note and go back to the notes selection list. I guess the Dev team couldn't figure out a way to dramatically update the opened Note on the fly without "refreshing" it. Probably had to rebuild the Notes app and they gave up?
    A bit disappointed as I helped promoting how useful the iCloud is and keep telling people "it just works". Cuz basically, it didn't.

    I found the solution to this problem. You'll find it in a similar thread that was started here:
    https://discussions.apple.com/message/19042689#19042689

  • Is it just me, or do most of the upgrade problems (not bugs) happen when updating "over-the-air", rather than using a computer and iTunes ?

    I have used iTunes on a computer every time, and so far have had no problems like the ones we are seeing here.
    Just want to reiterate - I am not talking about iOS 7 bugs - but just performing the update(s)

    Absolutely!!  I've had no problems upgrading the iPhone using iTunes.  It also allows me to backup the iPhone's settings so I can recover them if something goes wrong in the upgrade process.  I have always upgraded using iTunes and would not do it any other way.
    My wife upgraded to iOS6 directly to her iPhone 4S and lost her contacts and other information, and had problems with wifi access, etc.  At the next iOS change, I did the upgrade on her phone through iTunes and had no problem.
    Even MacWorld reports that upgrading "over the air" directly on the iPhone/iPad/iPod Touch can create instability in the OS.

  • Could not purchase error when updating apps

    When I try to update apps on my iphone, I get the error "Could Not Purchase "Insert App Name Here". An Unknown error occurred (5002)."
    Mac Pro, OS X 10.7.5. iTunes 11.0.4. I have never had this error before. Until I updated of course :>(. Before the update button read "Update Free Apps" or something like that. Some of the paid apps update fine, but not the free ones, and all the updates R free regardless...

    Hello, Welcome to discussions. Below are some articles to offer further assistance
    iPod touch and iPhone: Turning on/off and resetting
    http://support.apple.com/kb/HT1430
    iPhone basic troubleshooting
    http://www.apple.com/support/iphone/troubleshooting/phone/
    *Restore is a last option you can try. There are more options below you can try before a restore
    *Erase all content and settings is also a last option to try
    -Reset Network Settings, This will erase all WiFi Passwords, VPN info if you set that up and may also remove your Apple ID off the iPhone to be added later. Does not affect actual data content.
    -Settings - General - Reset - Reset Network Settings - Confirm - Once iPhone is backup and running proceed to update an App
    You may also wish to sync a free app from iTunes to the iPhone. This will carry over your latest iTunes account information and then update App that needs update again. If you feel you need to deauthorize the iTunes account and reauthorize the account more information about this below.
    About iTunes Store authorization and deauthorization
    http://support.apple.com/kb/HT1420

  • "Document  does not exist" exception when updating a Purchase Order, Agentry

    Hello Gurus,
    I updated a PO in SAP by calling the Bapi. It displays the error:
    com.syclo.sap.mm.steplet.POUpdateSteplet::throwExceptionToClient::1513::POUpdateSteplet - Document  does not exist |
    I checked on SAP and found the PO there. And in the log file, the PONumber, Company code are sent to the server. Then  why It throws the above exception.
    I spent a day but cannot find out what happen to the PO. Please help me. Thank you very much.
    Edit: Even though I hard coded the PO Number, it still display the error.
    JCO.Structure header = _imports.getStructure("IS_POHEADER");
      String poNumber = user.getString("transaction.PONumber");
      setValue(header, log, "PO_NUMBER", poNumber);
      String companyCode = user.getString("transaction.CompanyCode");
      setValue(header, log, "COMP_CODE", companyCode);
      String purchaseOrg = user.getString("transaction.PurchaseOrganization");
    JCO.Structure headerX = _imports.getStructure("IS_POHEADERX");
    setValue(headerX, log, "PO_NUMBER", poNumber);
    setValue(headerX, log, "COMP_CODE", "X");

    Jason,
    I checked the SAP error log and found the issue in the log. I am not sure if it is the cause of "Document doesnt exists. Please help me figure it out. Thank you very much.

  • ITunes 10.2.2 does not stay minimized when updating Apps in iTunes Store

    Running iTunes 10.2.2 on Mac OS X 10.6.7, when I'm on the iTunes store, and request it to update all my iPhone Apps and then I minimize iTunes, it pops up again at every new download interfering with whatever task I'm doing.
    Why won't iTunes stay minimized and run tasks in the background and constantly pop-up for attention?
    THanks,
    Daniel

    I am having the same problem. I can't actualy minimize itunes at all. It stays open in full screen unless i go to the task manager. And then when I do anything in iTunes, even if I am in another app, it pops back into full screen.
    The last four or five versions of iTunes have absolutely sucked ***.
    Yet another annoying so called "improvement." What is wrong with you people at Apple? If you take your car to the mechanic to fix the windshield, they don't add a fifth wheel...

  • Pls, help. Activation lock with old ID not my ID when update ios 7.0.4

    i bought old iphone 4s with ios 7.0.3, i signed in my ID icloud in setting. i update ios to 7.0.4. I get activation lock with old id not my id. I can't pass activation lock my iphone, pls...help me

    hoatrieuvan wrote:
    i restore ios 7.0.4 and I get the old previous owner ID. pls.... help
    The Apple ID and Password that was Originally used to Activate the iDevice is required
    If you do not have that information you will not be able to use the Device.
    Activation Lock in iOS 7  >  http://support.apple.com/kb/HT5818

  • Contribute changes not showing after site update

    A few months ago I added a top level navigation item to a client site.  That made changes to the code for every page in the site, but the changes the client had made with Contribute 4 still showed in browsers.
    Just posted the pages for another addition to top level nav.  This again made changes to the code on every page of the site.  This time the Contribute changes do not show in browsers.
    The Contribute files are still in their folders on the server.
    Navigation to the pages modified in Contribute has not changed.
    Is there a simple fix to wake up the Contribute files?

    If there are any errors in yur code, FB will not compile
    anything new.
    Verify that you do not have any errors in the Problems pane.
    Then try Menu, Project, Clean.
    Tracy

  • DSR-11 not working properly when updated to OS 10.4 & FCP 6

    IS the DSR-11 compatible with OS 10.4 & FCP 6?
    when i opened fcp after updating the OS and FCP, it said it cannot recognise the firewire device. i clicked ignore and opened log & capture and it says "tvr ok" but i get no video...
    any thoughts?

    Many (w-a-y too many) people have had terrible (way too terrible) upgrade experiences with their Firewire systems failing to recognize their old gear. You can search for the error message you are seeing or DSR11 (dsr-11 DSR-11) and see what shows up.
    In my case, my dsr11 drops offline about twice a week. I often just shut down, wait a few minutes and reboot the Macintosh to reset the FW bus (that's what I've been told this does, rests the FW bus).
    If yo continue to be unable to use your FW input, try trashing the prefs files (search this forum for FCP RESCUE or TRASHING PREFS) for some help on doing that.
    bogiesan

  • Item does not exist error when updating item

    Hi,
    I have a list called "Deal" and I have a ItemUpdated event to update the item permission based on a list field "Owner".
    I find the code run well with site collection administrator account. If I use a regular user account to edit the item, it throws "Item does not exist" error after clicking save button. But the item is actually updated.
    I run the code under debug mode and it does not throw any exception. But the page shows "Item doex not exist" error.
    If I retract the solution, the item can be updated normally without any error.
    My code and the error message:
    public override void ItemUpdated(SPItemEventProperties properties)
    if (properties.ListTitle.Equals("Deal"))
    base.ItemUpdated(properties);
    try
    SPSecurity.RunWithElevatedPrivileges(delegate
    using (SPSite elevatedSite = new SPSite(properties.SiteId))
    using (SPWeb elevatedWeb = elevatedSite.OpenWeb())
    SPList elevatedList = elevatedWeb.Lists[properties.ListId];
    SPListItem elevatedListItem = elevatedList.Items.GetItemById(properties.ListItem.ID);
    // Get Lead owner
    SPFieldUserValue uValue = (SPFieldUserValue)elevatedListItem.Fields["Owner"].GetFieldValue(elevatedListItem["Owner"].ToString());
    SPUser owner = uValue.User;
    bool oldValue = elevatedWeb.AllowUnsafeUpdates;
    elevatedWeb.AllowUnsafeUpdates = true;
    elevatedListItem.ResetRoleInheritance();
    // Break inheritance and clear permissions on list item
    if (!properties.ListItem.HasUniqueRoleAssignments)
    elevatedListItem.BreakRoleInheritance(false);
    // Add permissions for current user
    this.SetPermissionsForUser(elevatedWeb, elevatedListItem, owner, "LeadsOwnerPermission");
    this.EventFiringEnabled = false;
    elevatedListItem.SystemUpdate();
    this.EventFiringEnabled = true;
    elevatedWeb.AllowUnsafeUpdates = oldValue;
    catch (Exception ex)
    COMException (0x81020016): Item does not exist.
    The page you selected contains an item that does not exist. It may have been deleted by another user.<nativehr>0x81020016</nativehr><nativestack></nativestack>]
    Microsoft.SharePoint.Library.SPRequestInternalClass.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback, ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView) +0
    Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback, ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView) +256
    [SPException: Item does not exist.
    The page you selected contains an item that does not exist. It may have been deleted by another user.]
    Microsoft.SharePoint.WebPartPages.DataFormWebPart.InsertCallback(Int32 affectedRecords, Exception ex) +24356360
    System.Web.UI.DataSourceView.Insert(IDictionary values, DataSourceViewOperationCallback callback) +4064980
    Microsoft.SharePoint.WebPartPages.DataFormWebPart.FlatCommit() +378
    Microsoft.SharePoint.WebPartPages.DataFormWebPart.HandleOnSave(Object sender, EventArgs e) +24
    Microsoft.SharePoint.WebControls.SaveButton.OnBubbleEvent(Object source, EventArgs e) +727
    System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +70
    System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +29
    System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2981

    Can you try removing user permissions iteratively.
    The sample code will look like this.
    //get usernames
    string tempFieldValue = listItem["Assigned To"].ToString();
    string[] userNameArray = listItem["Assigned To"].ToString().Split(';');
    //remove permissions first
    web.AllowUnsafeUpdates = true;
    listItem.BreakRoleInheritance(false);
    SPRoleAssignmentCollection raCollection = listItem.RoleAssignments;
    //remove exisiting permissions one by one
    for (int a = raCollection.Count - 1; a >= 0; a--)
    raCollection.Remove(a);
    for (int i = 1; i < userNameArray.Length; i++)
    tempFieldValue = userNameArray[i].Replace("#", "");
    userName = web.AllUsers[tempFieldValue];
    toAddress = userName.Email;
    SPSecurity.RunWithElevatedPrivileges(delegate()
    //EMAIL USER
    bool result = SPUtility.SendEmail(web, appendHtmlTag, htmlEncode, toAddress, subject, message);
    //PERMISSIONS
    //grant permissions for specific list item
    SPRoleDefinition roleDefintion = web.RoleDefinitions.GetByType(SPRoleType.Contributor);
    SPRoleAssignment roleAssignment = new SPRoleAssignment(userName);
    roleAssignment.RoleDefinitionBindings.Add(roleDefintion);
    listItem.RoleAssignments.Add(roleAssignment);
    listItem.Update();
    i++;
    jaik

Maybe you are looking for