Changes Not reflecting in NWBC client

Hi Gurus,
We have done some changes to add an Application in ESS Launchpad which is working fine when launched from NWBC for HTML
Link in NWBC for HTML :
When same link is accessed from NWBC Client changes are not reflected. we are using NWBC 4.0 PL9 and we have cleared all the cahce in Extended support .
Link in NWBC Client:
Any input is welcome, I have searched all the usual places however havn't been able to find anything helpful on this particular issue.
Best Regards,
Ashish Sachdeva

Hi Samuli,
Thanks for your inputs. We would check on the pointers mentioned by you.
I am working with Ashish on the same issue. The link Ashish is referring here is the Open enrollment link under benefits.
The link appears automatically if we maintain adjustment reason in 0378.
It is appearing in NWBC for HTML but not for desktop client when we login with the same userid.
We are experincing this almost all are test users in the development and quality systems.
Thanks,
Sahiba
Message was edited by: Sahiba Gandhi- 8/21/2014
To check the cache thing , I just made a quick test. My test user for which Open enrollment link was not appearing was earlier mapped to some user say XYZ at 105/001.
I got a new userid created say ABC and mapped at 105/001 for the same test pernr and I am able to see the Open Enrollment link now.
I am quite sure now that it has to do with some Cache refresh at user level.
Any inputs are highly appreciated.
Thanks,
Sahiba

Similar Messages

SAP Portal changes not reflect in all the servers without reboot?

Dear SDN Members
We have one sap ep 7.0 eh1 main instance and 4 other portal instances.every time we tranport any portal develpment work such as epa packages, we need to restart all the instances to reflect the new changes.can you please suggest me
a solution if exists to avoid bouncing of all instances when a portal development work is transported.
Why does the changes not reflect in all the servers without the reboot??
Thanks
Chandra

Thanks for the quick response kenny, i wonder if we can configure any parameters in UME
to avoid bouncing of all the instances. please let me know if you have any other suggestions.
actually we have a central portal instance and 4 other portal servers connected through a
load balancer.Any tranport we move to central instance should refelect the changes in all
other portal instances.But we need to restart all the instances to see the new changes.
We are trying to find a solution if availbel which prevents server-restarts after each transport.
Thanks
Sekhar

The Work phone number which I deleted is not reflected in Lync Client.

Hello All,
The Work phone number which I deleted is not reflected in Lync Client. It's been more than 48 hours since I deleted the work phone number in AD. But still the same number listed in the lync contact card. Client policy has been set to 'File download
only' and Lync client Galcontacts.db has the present date so no issues in downloading the address book file.
I did the following but the issue is same.
>> Forced the address book by shell commands in Lync server to get the new full file generated but no luck after.
>> Added 'GalDownloadInitialDelay' reg key but still issue persists.
>> Deleted all suggested contacts, frequent contacts from outlook contacts and also deleted the 'ContactStateCacheU' registry key but no luck.
Please let me know if anyone has this issue fixed.
Much thanks.

Hi,
So the user is EV enabled and has a LineURI. Is that LineURI number the same number that you removed from AD? For example:
1. I removed (555) 555-1212 from my Work Number AD field for John Doe
2. John Doe has a LineURI of tel:+15555551212
If so, that is expected. LineURIs are also taken into consideration when building a user's contact card. If you do not want this number to show up in the GAL, you will need to look at a
private line for that user.
Please “Vote As Helpful” and/or “Mark As Answer” if this post helped you. Thanks!
Adam Curry, UC Consultant, Unify Square Inc. (Blog,
Twitter)
Looking for Lync Users Groups in your area? Check out
Lync Users Group

Changes in the Custom include do not reflect in testing client

Hi All,
I have added some custom fields in Infotype 21 in the dev environment. But, the changes are not reflecting in the testing environment. Can anyone share their thoughts.
Thanks in advance,
Guru.

Hi Appana,
Yes, we can identify any screen changes from sy-datar. It is set when I make any changes in the custom screen also. But I dont want to give a pop up every time I leave the custom screen. I want to give raise a pop up for saving the delivery document just like any other SAP screen (For eg. SAP Screens do not give a pop up when we move from one screen to another screen, but it gives a pop up if we try to do a subsequent functions like picking without saving the changes in delivery).
Thanks
Anil

Group membership for users is not reflected at the client until full reboot

Ok, so I am new to this:
So I created two groups on the server g1 and g2. Created two server users u1 and u1. I have one client with three accounts: System Admin, u1 and u1.
On the server:
g1 has one member u1
g2 has one member u2
When I swap the membership on the server using Server pref. or Workgroup manager, the users on the client still have access to their original group.
I tried logging everyone out of the client. I does not work.
The only way is to reboot the client completely. However, sometimes when I change the membership it does get reflected on the client. Any ideas?
Equipment:
One (1) Mac Mini Server 10.6.3, clean install. (defaults to OD)
One (1) MacBook Pro 17" , 10.6.4
Is there a way to push?

Answer!
UAC (User Account Control) must be set to OFF to disable this message.
Another error message that really has nothing to do with what's really happening!
Ugh.

Changes not reflecting in JSP page

Recently we upgraded our server from orion to oc4j.When on the client side any changes were made in the java bean
its not reflecting immediately in the corresoponding jsp page or the application. We tried to look at all angels like class file in web-inf its changing there.The changes are taking place only after restarting the server. Pl give us valuable suugestion
Regards
Kumar

It is correct that the change in the JavaBean is not taking effect until you restart the server (as far as I know anyway).
If you are using version 9.0.4 or using a version that uses JDP 1.4.x try using the HotSwap tool which can dynamically reload classes on the fly. Excellent tool for development but not sure if it is recommended for a Production environment.
Also, if you are using JDK 1.4.x, try using JDeveloper 10g and it's excellent debugging tools for development, it will swap your classes into the running JVM if the debugger is switched on.

PO changes not reflecting in the SAP R/3 system in Extended classsic

Hi Guys,
I have a querry regards to deletion of a PO line item in Extended classic scenario Version 5.0. User has deleted the line item in the shopping cart and now the status of the shopping cart is with Zero value and line item deleted, but in the PO there is a line item with some Value and we are trying to delete it and save it, it gets deleted and PO status it shows as awaiting approval. but at the Item level of the PO the check box of Item deletion is updated. which means PO line item is deleted.
Now my querry is the status of the PO in the SRM shows a awaiting approval and this is not in approval tab but at the header level when I try to search the PO with PO display/change option. Also its not reflecting with the deleted item in R/3 system.
Please help me.
Regards
Srujank

Hi
Check configuration of your Message server. check if your message server is configured properly. Just go to your SAP logon. Select the system say "DEV" and click on groups.Then Click on System id and enter the id as "ID1" in your case.
and then enter the machine name in the message server box and then click on generate list. If your message server is configured correctly you would get some groups in the list below. only if that comes then go to SLD and check in the ABap technical system if you have configured technical system using the proper logon groups.
Then you should not face this problem. Let me know if you require more information.
regards
ravi

Adobe Camera Raw changes not reflecting in Premiere Pro

I was super excited to try out the new CNDG support in Premiere Pro CC 2014, but I have to be honest - I am a bit disappointed...
I am using 16bit Cinema DNG files and the source settings sliders really aren't doing it for me (notice the pink highlights)
That's alright though, I would much rather use Adobe Camera Raw!
Right click > Edit Original
There we go, that looks nice - no pink highlights, nicely recovered details in the shadows and highlights.
PERFECT, click DONE!
Nothing...For whatever reason, changes are not reflecting.
Adobe - please allow us to use Adobe Camera Raw, there are so many folks out there that want to incorporate it into their workflow. I have tried SpeedGrade and various other color correcting tools and I have found Adobe Camera Raw to work the best IMHO
Thank you for your time.
-Loyal Paying Customer

Hi Ekombokom,
ekombokom wrote:
Hello! I too am having this same problem. I used Camera Raw (both in Bridge and Photoshop to make sure) to adjust and correct the Cinema DNG files I shot with my BMPCC; however, the video sequence in Premiere does not reflect any of the changes made. Why would Adobe not support Camera Raw settings in Premiere?
Sorry, but Premiere Pro does not have a camera raw importer. You adjust the settings in the Source Settings dialog box instead (for RED, ARRI Raw, BMCC and BM Pocket Camera DNG files). You do have access to some controls for these formats, but in some cases, Camera Raw has more controls.
ekombokom wrote:
Camera Raw is an amazing tool for refining an image and gives me the best results compared to SG and Davinci. I was so excited to be able to use it once Premiere supported CinemaDNGs but now I'm confused as to why it's not supported.
Cinema DNG from the Blackmagic Cameras are supported, you just adjust settings in Source Settings, as I mentioned. Have you tried that? The reasoning behind this is that Cinema DNG video coming from camera raw is too difficult to playback and edit with.
That said, some users bring Cinema DNG footage to After Effects, adjust the video there, then render out files that are suitable to edit with.
ekombokom wrote:
I thought the point of using Adobe was that all their products worked together seamlessly? I really hope they fix this.
You can always make a request here: http://adobe.ly/feature_request, however, I don't see a camera raw importer going into Premiere Pro any time soon (if ever) because of the reasons I previously mentioned (editing with camera raw would be too cumbersome). I think the more realistic feature request would be to add more controls in Source Settings.
Thanks,
Kevin

Custom report stored procedure changes not reflecting

Hi,
I have a custom report which works fine but now I want to do some changes in stored procedure. The stored procedure compiles successfully but the changes are not reflected in the report. Am I missing out something as I am assuming that once the stored procedure is saved, the changes must reflect immediately.
Regards,
Rahul Sharma

I did some changes in the where clause to include few more input parameters and thats it. I have not changed anything else. Moreover, even if I try to introduce an error intentionally, OIM is not picking it up. Is there any other reference which I need to change?

Transported to A and Q box - Changes not reflected in only A Box Q Box Ok?

Hi Experts,
I am facing an issue with Transportation in SAP BI.
In my project we have a requirement to create a new query After that we have developed that query with new requirement features.
As per the user requirement, the new developed query must be moved to production and where as the old version could not be displayed any more.
For that purpose, after developing the query in Dev Box i have collected the tp and deleted the old version query in DEV Box.
I have transported the new version developed query to Acceptance Box and then to Quality Box.
And tested in Acceptace and Quality Box whether new developed query features is reflecting or not .
Found that, in Quality Box new query featured reflected where as in Acceptance Box the new query reflections have not reflected.
Now my question is if i trasport the same tp to production whether changes will get reflect or not
And also would like to know the route cause why in the acceptace changes have not get reflected.
I am confirming that, in both acceptace and quality box the tp were trasported succefully with out any of the errors.
Kindly reply me any of the folks faced this kind of issue or scenario in your projects or expeiriance.
Thanks,
SN.

Hi,
Just try re-importing your query in OVERWRITE mode from D to A. Also request your basis team while transporting your TR to Prod to transport it in OVERWRITE mode.
Hope this helps.
Regards
Jeeth

Transport requests are not reflected in destination client

Hi,
I'm transporting a request contains the values from table
V_T510F_B Assign Pay Scale --> Currency from Developement to Quality but it is not reflected in Quality server?

hi,
Please make sure that tables are not opened in both source and destinaiton server, as it will hold the locks on objects,
Seconldy , sometimes it takes few minutes to reflect on the target server, wait for sometime then check the changes,
Check the transport logs to make sure your request transported successfully.
Take the above precautions and reimport the request.
Regards,
SM

Develop Module changes not reflected on screen

I have used LR for about 3 years and have never had an issue with it. I am using LR 5.7 64 bit. I have a Win7 Pro machine with 8 Gb of RAM and 2 TB drive that is 50% free. I do not have PS and I am not a Creative Cloud customer. Yesterday I started having trouble in the develop module. None of my changes are being reflected on the screen.
It almost seems that the window never changes from the image preview to the live image. When I try to zoom the image gets very pixelated (goes back to my theory I am still looking at the preview). I can zoom in library mode and the image zooms correctly.
If I leave develop module and go back to library the changes are reflected. I have 2 catalogs, both are effected. I tried creating a new catalog and the problem still exists. When I try to use the crop tool the screen goes completely white (or black depending on background color).
I have tried all of the steps in the basic troubleshooting. I have tried uninstalling and re-installing.
Has any one seen this behavior? Any ideas how to correct?

I have solved this problem by uninstalling the DirectX drivers and re-installing them.

Changes not reflected in iWeb 08 program

I have been making changes to my site, publishing them to the web and all is fine. When I close out iWeb (and SAVE) not all of my changes are reflected when I reopen iWeb.
The published site is very fine, bu a lot of the changes I have made to the site are no longer reflected in my iWeb 08 program,

Hi,
First try to check if all the elements are in the transport rquest and then reptransport it...
If this still doesnt work, do the foloowing:
Run the prg : RSTXSCRP in Dev and EXPORT the script on to a desktop/location
Run the prg : RSTXSCRP in QA and IMPORT the script from the desktop/location specified above.
Hope this helps you
Regards
Sk

Changes not reflected in Change to Document (tcode CRMD_ORDER)

Hello Expert,
I made a change in field 'Planned Completion Date', in my transaction through tcode CRMD_ORDER.
When I view Change to Document (CRMD_ORDER > top menu > Extras > Change Documents), the change is not reflected.
All changes are usually captured in the Change to Document.
Perhaps it is captured somewhere else?
Please assist.
Thank you.
HJMY

Hi HJMY,
Check if the Change document object provided for CRM_ORDER has the field in the SAP provided structure. This can be verified in transaction SCDO -> select change document object CRM_ORDER and display, you will see list of structures on the left hand side, if the field you are refering to is a part of one of these structures then the changes in this field are displayed when you go to (CRMD_ORDER > top menu > Extras > Change Documents). If it is not present then you will have to create a new change document object and assign a proper structure, you can generate update program to update that change documents. Hope this helps.
Thanks,
Priyanka

Changes not reflecting in Report designer after Transports

Hi,
I have made some changes to a Report in the report designer and transported it to Quality and Acceptance systems. But the changes are reflecting in Quality system not in Acceptance server. In Acceptance sever the changes are seen in the report physically but when i execute the report i still see the old format. I tried transporting the request again to the system but no luck.
Cleared the Cache in Acceptance still no luck. Also regenerated the base query in RSRT and no effect on the report. Any idea?
Thanks,
Praveen

Hi Praveen,
Make sure you have collected all the objects of the report.
You may check this in (development) RSA1->Transport Connection. Select that report and see if any objects are still not under $TMP or under any other Package and not got collected in your previous TR.
Regards,
Pratap Sone

Changes Not reflecting in NWBC client

Similar Messages

Maybe you are looking for