Changes not reflecting in publish server

I have created a component in CQ5 which gives a pop up window with gray background on clicking the image. It is working fine in author instance.In publish mode the JS is not working properly. I have cleared the cache from apache folder also. Still changes are not reflecting. Please tell me what to do?

There is no need to restart server. What version of CQ are you using ? I remember some JSP compilation issue in publish instance if JSP files get modified. But it was fixed in CQ5.5 update1. Also restarting JSP/sling classloader (org.apache.sling.commons.classloader and org.apache.sling.jcr.classloader) should trigger force recompilation.
Also since you mentioned you are clearing cache. From where are you trying to access changes ? Dispatcher or publish instance ?
Yogesh

Similar Messages

SAP Portal changes not reflect in all the servers without reboot?

Dear SDN Members
We have one sap ep 7.0 eh1 main instance and 4 other portal instances.every time we tranport any portal develpment work such as epa packages, we need to restart all the instances to reflect the new changes.can you please suggest me
a solution if exists to avoid bouncing of all instances when a portal development work is transported.
Why does the changes not reflect in all the servers without the reboot??
Thanks
Chandra

Thanks for the quick response kenny, i wonder if we can configure any parameters in UME
to avoid bouncing of all the instances. please let me know if you have any other suggestions.
actually we have a central portal instance and 4 other portal servers connected through a
load balancer.Any tranport we move to central instance should refelect the changes in all
other portal instances.But we need to restart all the instances to see the new changes.
We are trying to find a solution if availbel which prevents server-restarts after each transport.
Thanks
Sekhar

Changes in Crystal reports are not reflecting after publishing

Dear SDN Mates,
We are facing problem with Crystal reports. After making the changes in the crystal reports, it is not reflecting in the portal after publishing. Still it is showing the older version of the report.
Can anyone please help me on this.
Thanks and Regards
Arun S

Hello Prathamesh,
After publishing the report, we require some changes in the report and doing some modifications in crystal report and again we are publishing this report. After publishing the report for second time, those changes are not reflecting in the BOE portal.
This is happening for all reports. Can you please suggest me on this.
Thanks and regards
Arun S

Changes are not reflecting in Quality server

Dear All,
We have recently installed the Portal 7.4 servers.
Currently we are having two servers Development and Quality.We have Configured NWDI using CMS and created tracks(Defined run-time systems as Development and Consolidation) we are able to checkin the activities at NWDS , when we are selecting the component in the consolidation and on click of import we are getting the message as import finished, but the changes are not reflecting at the Quality server. i.e in earlier 7.01 version when we imported , the ear was deployed automatically in quality but it is not getting deployed in the new version 7.4
Regards,
Ramana.

Dear Ervin/Jun Wu,
Thanks for the Responce.
As per the given link the track is configured with out any issues (When we are clicking on Deployment in the Transport studio it is opening new tab like below and we are not having any errors when we click on Start deployment nothing is happening)
http://hostname:50000/webdynpro/dispatcher/sap.com/tc~SL~CMS~WebUI/Deployer?BS=EPD_PRTADEV_C
Please check the below log regarding deployment when we do the import
SDM-deployment-notification Log file.
20141028125231 Info :Starting Step SDM-deployment-notification at 2014-10-28 12:52:31.0994 +5:00
20141028125231 Info :Deployment is performed asynchronously.
20141028125231 Info :Following DCs are marked for deployment (buildspace = EPD_PRTADEV_C):
20141028125231 Info :
20141028125231 Info :RequestId: 152
20141028125231 Info :==> no resulting DCs for deployment
20141028125231 Info :Follow-up requests:
20141028125231 Info :
20141028125231 Info :
20141028125231 Info :Step SDM-deployment-notification ended with result 'success' at 2014-10-28 12:52:31.0995 +5:00
Regards,
Ramana.

PO changes not reflecting in the SAP R/3 system in Extended classsic

Hi Guys,
I have a querry regards to deletion of a PO line item in Extended classic scenario Version 5.0. User has deleted the line item in the shopping cart and now the status of the shopping cart is with Zero value and line item deleted, but in the PO there is a line item with some Value and we are trying to delete it and save it, it gets deleted and PO status it shows as awaiting approval. but at the Item level of the PO the check box of Item deletion is updated. which means PO line item is deleted.
Now my querry is the status of the PO in the SRM shows a awaiting approval and this is not in approval tab but at the header level when I try to search the PO with PO display/change option. Also its not reflecting with the deleted item in R/3 system.
Please help me.
Regards
Srujank

Hi
Check configuration of your Message server. check if your message server is configured properly. Just go to your SAP logon. Select the system say "DEV" and click on groups.Then Click on System id and enter the id as "ID1" in your case.
and then enter the machine name in the message server box and then click on generate list. If your message server is configured correctly you would get some groups in the list below. only if that comes then go to SLD and check in the ABap technical system if you have configured technical system using the proper logon groups.
Then you should not face this problem. Let me know if you require more information.
regards
ravi

Changes not reflected in iWeb 08 program

I have been making changes to my site, publishing them to the web and all is fine. When I close out iWeb (and SAVE) not all of my changes are reflected when I reopen iWeb.
The published site is very fine, bu a lot of the changes I have made to the site are no longer reflected in my iWeb 08 program,

Hi,
First try to check if all the elements are in the transport rquest and then reptransport it...
If this still doesnt work, do the foloowing:
Run the prg : RSTXSCRP in Dev and EXPORT the script on to a desktop/location
Run the prg : RSTXSCRP in QA and IMPORT the script from the desktop/location specified above.
Hope this helps you
Regards
Sk

Changes not reflecting in Report designer after Transports

Hi,
I have made some changes to a Report in the report designer and transported it to Quality and Acceptance systems. But the changes are reflecting in Quality system not in Acceptance server. In Acceptance sever the changes are seen in the report physically but when i execute the report i still see the old format. I tried transporting the request again to the system but no luck.
Cleared the Cache in Acceptance still no luck. Also regenerated the base query in RSRT and no effect on the report. Any idea?
Thanks,
Praveen

Hi Praveen,
Make sure you have collected all the objects of the report.
You may check this in (development) RSA1->Transport Connection. Select that report and see if any objects are still not under $TMP or under any other Package and not got collected in your previous TR.
Regards,
Pratap Sone

Changes not reflecting in JSP page

Recently we upgraded our server from orion to oc4j.When on the client side any changes were made in the java bean
its not reflecting immediately in the corresoponding jsp page or the application. We tried to look at all angels like class file in web-inf its changing there.The changes are taking place only after restarting the server. Pl give us valuable suugestion
Regards
Kumar

It is correct that the change in the JavaBean is not taking effect until you restart the server (as far as I know anyway).
If you are using version 9.0.4 or using a version that uses JDP 1.4.x try using the HotSwap tool which can dynamically reload classes on the fly. Excellent tool for development but not sure if it is recommended for a Production environment.
Also, if you are using JDK 1.4.x, try using JDeveloper 10g and it's excellent debugging tools for development, it will swap your classes into the running JVM if the debugger is switched on.

Theme changes not reflecting in Consumer EP7.02 portal.

Hi Experts,
We are in CE7.2(Producer) fedarated with Enterprise portal 7.02. We are using custom theme and modified the font color for disabled field property from #999(grey) to #000000(black) in consumer portal. The changes are not reflecting in consumer portal. We have tried modifying the Master head and its reflecting as expecting. Even after that we cleared the cache and did restart both the servers as well. Still the changes are not reflecting.
Please provide your inputs, it will be great helpful for us.
With Regards,
Ramesh G.

Hi Ramesh,
Please copy the custom theme folder and paste it in the following path in the consumer server:
<Drive_name>:\sap\<SID>\JC<Instance_Number>\j2ee\cluster\server<Node_Number>\temp\webdynpro\web\sap.com\tcwddispwda\global\SSR\themes
Thanks
Gautam Singh

Changes not reflecting in Bex Browser

Hi experts,
I made changes to standard web template defined in SPRO setting. Now because this standard web template so this change is getting reflected in all web templates.
But when user is executing these WAD templates through Bex Browser then changes are not getting reflected.
Could you please advice some solution.
I checked standard web templates is same for Bex Browser also.
Quick reply is appreciable and points is also waiting for you.

please clear the HTTP server cache using SMICM and the changes will become visible. If you are on WAD 7.0 then clear the cache in the JAVA stack also.
WAD templates are rendered in HTML and they tend to be cached within th app servers - if you make small changes to the same - the changes are not visible until the server cache is clleared.
SMICM --> goto --> HTTP Server Cache --> Invalidate --> Global
Edited by: Arun Varadarajan on Apr 21, 2009 3:09 PM
Edited by: Arun Varadarajan on Apr 21, 2009 3:09 PM

Adobe Camera Raw changes not reflecting in Premiere Pro

I was super excited to try out the new CNDG support in Premiere Pro CC 2014, but I have to be honest - I am a bit disappointed...
I am using 16bit Cinema DNG files and the source settings sliders really aren't doing it for me (notice the pink highlights)
That's alright though, I would much rather use Adobe Camera Raw!
Right click > Edit Original
There we go, that looks nice - no pink highlights, nicely recovered details in the shadows and highlights.
PERFECT, click DONE!
Nothing...For whatever reason, changes are not reflecting.
Adobe - please allow us to use Adobe Camera Raw, there are so many folks out there that want to incorporate it into their workflow. I have tried SpeedGrade and various other color correcting tools and I have found Adobe Camera Raw to work the best IMHO
Thank you for your time.
-Loyal Paying Customer

Hi Ekombokom,
ekombokom wrote:
Hello! I too am having this same problem. I used Camera Raw (both in Bridge and Photoshop to make sure) to adjust and correct the Cinema DNG files I shot with my BMPCC; however, the video sequence in Premiere does not reflect any of the changes made. Why would Adobe not support Camera Raw settings in Premiere?
Sorry, but Premiere Pro does not have a camera raw importer. You adjust the settings in the Source Settings dialog box instead (for RED, ARRI Raw, BMCC and BM Pocket Camera DNG files). You do have access to some controls for these formats, but in some cases, Camera Raw has more controls.
ekombokom wrote:
Camera Raw is an amazing tool for refining an image and gives me the best results compared to SG and Davinci. I was so excited to be able to use it once Premiere supported CinemaDNGs but now I'm confused as to why it's not supported.
Cinema DNG from the Blackmagic Cameras are supported, you just adjust settings in Source Settings, as I mentioned. Have you tried that? The reasoning behind this is that Cinema DNG video coming from camera raw is too difficult to playback and edit with.
That said, some users bring Cinema DNG footage to After Effects, adjust the video there, then render out files that are suitable to edit with.
ekombokom wrote:
I thought the point of using Adobe was that all their products worked together seamlessly? I really hope they fix this.
You can always make a request here: http://adobe.ly/feature_request, however, I don't see a camera raw importer going into Premiere Pro any time soon (if ever) because of the reasons I previously mentioned (editing with camera raw would be too cumbersome). I think the more realistic feature request would be to add more controls in Source Settings.
Thanks,
Kevin

Custom report stored procedure changes not reflecting

Hi,
I have a custom report which works fine but now I want to do some changes in stored procedure. The stored procedure compiles successfully but the changes are not reflected in the report. Am I missing out something as I am assuming that once the stored procedure is saved, the changes must reflect immediately.
Regards,
Rahul Sharma

I did some changes in the where clause to include few more input parameters and thats it. I have not changed anything else. Moreover, even if I try to introduce an error intentionally, OIM is not picking it up. Is there any other reference which I need to change?

Adobe form script changes not reflected when PDF created by ADS.

Hello Experts,
We have done some modifications (UI elements java script) in PDF form in the Development system and tested... everything fine and as expected everything working.
When we move the same changes to Quality system, the expected functionality is not working. For error analysis we followed below things.
--1. I have checked the PDF form in SFP TCode is newly added script code is available or not.... Is available in Quality system.
--2. I have run the application In SAP Portal, where we show this adobe form and saved locally generated PDF form by application. Then we imported same saved PDF form into ALD and checked... is newly written java script is available or not....strange is not available...... but in ECC under SFP TCode i am able to see the newly written script code.
--3. o.k. we feel that some issue with ADS server so avoid that we restarted the server even though same.... the newly written script PDF form is not picked by ADS server while generating the PDF in the portal application.
Can some one throw some torch on this issue?
Regards
Malli
Edited by: mallikarjuna pasupulati on Apr 7, 2011 9:03 AM

Steve,
Might M. Kazlow's announcement be relevant?
Announcement: Mac OS X.7 Lion Compatibility and Acrobat X
Mac OS X.7 is not fully compatible with Acrobat X.
Please see http://kb2.adobe.com/cps/905/cpsid_90508.html for more details.
by MichaelKazlow at Jul 20, 2011 1:17 PM
Be well...

Transported to A and Q box - Changes not reflected in only A Box Q Box Ok?

Hi Experts,
I am facing an issue with Transportation in SAP BI.
In my project we have a requirement to create a new query After that we have developed that query with new requirement features.
As per the user requirement, the new developed query must be moved to production and where as the old version could not be displayed any more.
For that purpose, after developing the query in Dev Box i have collected the tp and deleted the old version query in DEV Box.
I have transported the new version developed query to Acceptance Box and then to Quality Box.
And tested in Acceptace and Quality Box whether new developed query features is reflecting or not .
Found that, in Quality Box new query featured reflected where as in Acceptance Box the new query reflections have not reflected.
Now my question is if i trasport the same tp to production whether changes will get reflect or not
And also would like to know the route cause why in the acceptace changes have not get reflected.
I am confirming that, in both acceptace and quality box the tp were trasported succefully with out any of the errors.
Kindly reply me any of the folks faced this kind of issue or scenario in your projects or expeiriance.
Thanks,
SN.

Hi,
Just try re-importing your query in OVERWRITE mode from D to A. Also request your basis team while transporting your TR to Prod to transport it in OVERWRITE mode.
Hope this helps.
Regards
Jeeth

Develop Module changes not reflected on screen

I have used LR for about 3 years and have never had an issue with it. I am using LR 5.7 64 bit. I have a Win7 Pro machine with 8 Gb of RAM and 2 TB drive that is 50% free. I do not have PS and I am not a Creative Cloud customer. Yesterday I started having trouble in the develop module. None of my changes are being reflected on the screen.
It almost seems that the window never changes from the image preview to the live image. When I try to zoom the image gets very pixelated (goes back to my theory I am still looking at the preview). I can zoom in library mode and the image zooms correctly.
If I leave develop module and go back to library the changes are reflected. I have 2 catalogs, both are effected. I tried creating a new catalog and the problem still exists. When I try to use the crop tool the screen goes completely white (or black depending on background color).
I have tried all of the steps in the basic troubleshooting. I have tried uninstalling and re-installing.
Has any one seen this behavior? Any ideas how to correct?

I have solved this problem by uninstalling the DirectX drivers and re-installing them.

Changes not reflecting in publish server

Similar Messages

Maybe you are looking for