Changes on code editor code style are not applied on restart

Jdeveloper 11.1.1.3.0
Tools > Preferences > Code Editor > Code style > Edit > Modify "Indentation Size" > OK > OK > Close Jdev > Open Jdev => modified "Indentation size" not applied.
Any solution?

hi user474075
I have noticed something similar for which I have created service request 3-1764420131 ,
which resulted in bug 9740870 , "CODE STYLE USE TAB CHARACTER ISSUE"
for which "... We are waiting for the review process of the bug to be completed. ... "
So, if you can create your own service request (at http://support.oracle.com ) and refer to bug 9740870 that might speed things up.
(tip : You can use "Your Control Panel" to make your name visible in forum posts.)
regards
Jan Vervecken

Similar Messages

  • Preferred Source Code Editor Bracket Styles

    The CVI Team would like to get an idea what the most commonly used source code editor bracket styles are. These options are currently available through Options >> Editor Preferences >> Bracket Styles. Please post your comments in the Preferred Source Code Editor Bracket Styles NI Community document.
    Thanks
    Jonathan N.
    National Instruments

    <quote>"I wouldn't personally use Eclipse as a high water mark"</quote>
    LOL! Good point. Ironic that I said that, considering how much I disliked Eclipse when I first used it.
    I've set the options on the indention tab - what I'm mostly looking for is a way to force alignment style of brackets. I'll look at one of the beautification add ons...

  • Changes are not applying

    I have made a couple of changes to a movie and they are not applying in the canvas.
    EG - I have changed the colour of some text that appears. The preview icon on the clip in the timeline has changed the colour of the text, the preview in the viewer has changed, but the canvas hasnt. Also it isnt asking me to render which it usually would.

    You can quickly force a render by lowering, then raising the opacity of the clip. There are also more involved/complex ways to replace a render.
    -DH

  • Anti spam codes for website forms are not being accepted on my imac or iPad

    anti spam codes for website forms are not being accepted on my imac or iPad

    In Safari go to preferences click on privacy and on Block Cookies tick the never box

  • User changes in tab strip ui element are not recorded in context change log

    Hi All,
    We are using a tab strip ui element in webdynpro component. But user changes inside tab strip ui element are not getting recorded to the context change log. I have an input field on the same view besides  tab strip ui element. User changes to this input field are getting recorded to the context change log.
    Is there any restriction on context change log usage with tab strip ui element?
    Could you please suggest If there is any way to record changes inside tab strip ui element.
    Thanks,
    Sudheer.

    I think there are some limitations exists, context change logs are not complete when you do value help , i am not sure about tab strip.
    [http://help.sap.com/saphelp_nw70ehp1/helpdata/en/47/a8e5d273b12fe2e10000000a42189d/content.htm|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/47/a8e5d273b12fe2e10000000a42189d/content.htm]

  • Changes are not applying to the reports

    hi all
    i have moved the RPD and catalog file to UAT there i got few changes
    i did the changes in DVE and again i moved the changed reports to UAT ,but the report changes are not applied in UAT
    so i again i copied same RPD and catalog to UAT now it is working fine,
    why the changes are not applied to the reports that i have moved to UAT
    is it mandatory to move RPD and catalog to the other environment ??
    Thanks

    Hi,
    if you change even the filters and column names you cant modify only reports and place them in UAT,if you want to cnahge that way there is a tool CAF follow this link how to do that process
    http://debaatobiee.wordpress.com/category/obiee/setup-and-environment/
    If not you need to deploy RPD and catalog into UAT.
    By,
    KK

  • Graphics(Styles) are not Affecting in HTML Format of Smart Form

    Hi,
    I have converted a Smartform from PDF format to HTML. but the Graphics ( Styles ) are not Affecting the out put.
    Can any body Give me the solution.

    Please suggest me ,how to convert from pdf to html workformat,if any program is available for that.Please send it

  • My existing object styles are not visible

    My existing object styles are not visible in the object style panel- only via quick apply (so I know they exist)
    Any idea how I can make this panel functional again?
    Using CS6
    Thanks!

    @ Bob, I think you posted the response to a differnt question...
    @ chandasz, see Replace Your Preferences

  • Styles are not showing in html mail

    Hello all,
    i have a servlet that sends a mail in html format. i have a string with all the html tags, and the first part of the string is as follows:
    String htmlText = "<html><link href='styles/styles.css' type='text/css' rel='stylesheet'>....here gos the rest of the html tags.
    i receive the mail properly, but seems that the styles are not working....any help?
    Thanks

    Because the link to your stylesheet is a relative URL, and in an e-mail there's no base URL for it to be relative to. Using a fixed URL like http://yourhost.org/styles/styles.css would probably work.

  • How do I change system settings so that users are not required to enter the mac's admin pw in order to join a wifi network?

    how do I change system settings so that users are not required to enter the mac's admin pw in order to join a wifi network?
    Right now my macbook pro requires an admin password before connecting to a new wifi network. In other words when a user that is not an admin tries to connect to a new wifi network the pop up displays indicating that it is locked and an admin password is required.
    Is there a way to remove this restriction so that a non admin can connect to wifi without the mac's admin password.

    You can enable / disable this option in System Preferences:
    System Preferences > Network > Wi-Fi > Advanced > Wi-Fi tab > Require administrator authorization to: Change networks

  • Redo log files are not applying to standby database

    Hi everyone!!
    I have created standby database on same server ( windows XP) and using oracle 11g . I want to synchronize my standby database with primary database . So I tried to apply redo logs from primary to standby database as follow .
    My standby database is open and Primary database is not started (instance not started) because only one database can run in Exclusive Mode as DB_NAME is same for both database.  I run the following command on the standby database.
                SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE DISCONNECT FROM SESSION;
    It returns "Database altered" . But when I checked the last archive log on primary database, its sequence is 189 while on standby database it is 177. That mean archived redo logs are not applied on standby database.
    The tnsnames.ora file contains entry for both service primary & standby database and same service has been used to transmit and receive redo logs.
    1. How to resolve this issue ?
    2.Is it compulsory to have Primary database open ?
    3. I have created standby  control file by using  command
              SQL> ALTER DATABASE CREATE STANDBY CONTROLFILE AS ‘D:\APP\ORACLE\ORADATA\TESTCAT\CONTROLFILE\CONTROL_STAND1.CTL‘;
    So database name in the standby control file is same as primary database name (PRIM). And hence init.ora file of standby database also contains DB_NAME = 'PRIM' parameter. I can't change it because it returns error of mismatch database name on startup. Should  I have different database name for both or existing one is correct ?
    Can anybody help me to come out from this stuck ?
    Thanks & Regards
    Tushar Lapani

    Thank you Girish. It solved  my redo apply problem. I set log_archive_dest parameter again and then I checked archive redo log sequence number. It was same for both primary and standby database. But still table on standby database is not being refresh.
    I did following scenario.
    1.  Inserted 200000 rows in emp table of Scott user on Primary database and commit changes.
    2. Then I synchronized standby database by using Alter database command. And I also verify that archive log sequence number is same for both database. It mean archived logs from primary database has been applied to standby database.
    3. But when I count number of rows in emp table of scott user on standby database, it returns only 14 rows even of redo log has been applied.
    So my question is why changes made to primary database is not reflected on standby database although redo logs has been applied ?
    Thanks

  • Archive logs are being shipped, but are not applied

    Hi everyone,
    Some strange things are happening when I try to configure an Oracle Data Guard setup. Currently I am at the point where the configuration has been completed, and I just need to sync the standby database to the primary one. I can see in the log files that the archive logs are being shipped, but they are not applied on the standby system.
    If I run "recover standby database;" manually in sqlplus I can see that it is trying to apply an archive log which is way too old (ORA-00279: change 9656498443 generated at 04/29/2008 08:45:08 needed for thread 1).
    In the alert log I can also see this error: Warning: Recovery target destination is in a sibling branch of the controlfile checkpoint. Recovery will only recover changes to datafiles.
    At this point I was thinking that the standby database might be on a different incarnation compared to the primary, but this is not the case, they are both in incarnation 6:
    6       6       MVF      4023175798       CURRENT 48493546257 13-06-21
    Does anyone have an idea how this could happen, and how I could fix this issue?
    Thanks, JM.

    The restore did not cause any errors to be displayed, so I assumed everything was ok.
    That's fair enough. 
    One thing I think might cause this behaviour is that the backup on the primary database is incremental,
    Yes...that may be an issue.  Best bet is to re-run your standby creation.....as you are doing.
    With version 11gR2 you also have the option of duplicate from active database which negates the need to copy your backupsets over to do the restore:  I find it a much simpler process than the rman backup, copy files over, restore and then recover process.
    http://www.oracle-base.com/articles/11g/data-guard-setup-11gr2.php
    Something worth considering.

  • Aperture 3 edits are not applied when opening in Photoshop CS5.

    I have Photoshop CS5 selected as external editor.  I apply some edits in Aperture 3 and then open in Photoshop cs5 to do heavier work, but aperture 3 edits are not applied.  I get a new image from Master.  How do I get the edited image to open in Photoshop CS5?  I would rather do the cropping and simpler edits in Aperture, then if needed open the edited file into CS5.  I can open the file, but it is missing all of my edits.  I have basically a raw master file that I have to start with, but don't have the advantage of the raw file.

    I'm right clicking on the photo and selecting -> edit with Edit with Adobe Photoshop CS5.  The photo opens in Adobe, but it doesn't have any of the Aperture edits applied to it.  I would have to start from scratch doing these in photoshop.  I want to be able to do the Raw adjustments in Aperture and then open into Photoshop. 
    To test I applied a crop in Aperture and then opened that file in Photoshop.  The full size image opens in Photoshop. 

  • Selection criteria are not applied to summary fields on group footers.

    I wonder if anyone can help me with this problem.  I am using Crystal reports version 11.2, and my data source is a Sql Server view.
    The records on the view have a date field, and I have selected all records within a given date range in "Selection Formulas".
    The records are then grouped, and the Crystal summary facility used to summarise number fields on the group footers.
    So for example, if my view contains four records, one with field "amount" = 2, one with field "amount" = 8, one with field "amount" = 6, one with field "amount" = 3, but only the first two records are within the valid date range, you would expect to see the first two records listed out at detail level, then field "amount" summarised at group level, with a summarised value of 10.
    ie ....                record1                      2
                           record2                      8   
                           group level total         10
    This works fine when I run the report using Crystal's "print preview" facility.  However, when the report is run from within an application written in C#.NET, the selection criteria are not applied to the summary field, so you get ..
                           record1                      2
                           record2                      8   
                           group level total          19
    I tried putting the date selection criteria at both record and group level, but that did not work.
    I googled the problem and found an article explaining that Crystal first performs the record-level selection, then it creates the groups and totals up any summary fields, and only then does it apply the group-level selection criteria, which can lead to problems like the one I have described above.  However, since I have put my date selection criteria at both record and group level, I do not understand why I still get the problem.
    In one report I got round this problem by creating a formula that returned zero if the record date was outside of the valid date range, and returned the number field to be summarised if the date was valid, then summarising that formula, instead of summarising the number field directly.
    In other reports I created one formula to set a shared variable as zero, then another formula to accumulate it at detail record level, then another formula to display the variable at the group footer.  In other words, I did not bother with the Crystal summary facility at all, but created my own summary facility.
    While googling the problem to see what other people did in this situation, I noticed that most fixes used variations of the "shared variables and formulae" fix to get round the problem.
    The problem is that I have lots of complex reports and it will take ages to replace the summarised fields with shared variables and formulae.  The reports were initially tested with "Print Preview" so we did not notice this problem until the C#.Net application was ready to use them.  And I can't believe that you are simply meant to ignore the summary facility and re-invent the wheel by doing it all manually.
    Please tell me that there is something simple that I have been doing wrong!!!  If I have not given enough information for you to answer, please let me know.
    Thanks,
    Anne-Marie

    Hi, Anne-Marie;
    You may be running into a common issue that is docuemented here:
    [SelectionFormula|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233303334333833393335%7D.do]
    Regards,
    Jonathan
    Edited by: Jonathan Parminter on Mar 16, 2009 8:03 AM

  • I have one problem with Data Guard. My archive log files are not applied.

    I have one problem with Data Guard. My archive log files are not applied. However I have received all archive log files to my physical Standby db
    I have created a Physical Standby database on Oracle 10gR2 (Windows XP professional). Primary database is on another computer.
    In Enterprise Manager on Primary database it looks ok. I get the following message “Data Guard status Normal”
    But as I wrote above ”the archive log files are not applied”
    After I created the Physical Standby database, I have also done:
    1. I connected to the Physical Standby database instance.
    CONNECT SYS/SYS@luda AS SYSDBA
    2. I started the Oracle instance at the Physical Standby database without mounting the database.
    STARTUP NOMOUNT PFILE=C:\oracle\product\10.2.0\db_1\database\initluda.ora
    3. I mounted the Physical Standby database:
    ALTER DATABASE MOUNT STANDBY DATABASE
    4. I started redo apply on Physical Standby database
    alter database recover managed standby database disconnect from session
    5. I switched the log files on Physical Standby database
    alter system switch logfile
    6. I verified the redo data was received and archived on Physical Standby database
    select sequence#, first_time, next_time from v$archived_log order by sequence#
    SEQUENCE# FIRST_TIME NEXT_TIME
    3 2006-06-27 2006-06-27
    4 2006-06-27 2006-06-27
    5 2006-06-27 2006-06-27
    6 2006-06-27 2006-06-27
    7 2006-06-27 2006-06-27
    8 2006-06-27 2006-06-27
    7. I verified the archived redo log files were applied on Physical Standby database
    select sequence#,applied from v$archived_log;
    SEQUENCE# APP
    4 NO
    3 NO
    5 NO
    6 NO
    7 NO
    8 NO
    8. on Physical Standby database
    select * from v$archive_gap;
    No rows
    9. on Physical Standby database
    SELECT MESSAGE FROM V$DATAGUARD_STATUS;
    MESSAGE
    ARC0: Archival started
    ARC1: Archival started
    ARC2: Archival started
    ARC3: Archival started
    ARC4: Archival started
    ARC5: Archival started
    ARC6: Archival started
    ARC7: Archival started
    ARC8: Archival started
    ARC9: Archival started
    ARCa: Archival started
    ARCb: Archival started
    ARCc: Archival started
    ARCd: Archival started
    ARCe: Archival started
    ARCf: Archival started
    ARCg: Archival started
    ARCh: Archival started
    ARCi: Archival started
    ARCj: Archival started
    ARCk: Archival started
    ARCl: Archival started
    ARCm: Archival started
    ARCn: Archival started
    ARCo: Archival started
    ARCp: Archival started
    ARCq: Archival started
    ARCr: Archival started
    ARCs: Archival started
    ARCt: Archival started
    ARC0: Becoming the 'no FAL' ARCH
    ARC0: Becoming the 'no SRL' ARCH
    ARC1: Becoming the heartbeat ARCH
    Attempt to start background Managed Standby Recovery process
    MRP0: Background Managed Standby Recovery process started
    Managed Standby Recovery not using Real Time Apply
    MRP0: Background Media Recovery terminated with error 1110
    MRP0: Background Media Recovery process shutdown
    Redo Shipping Client Connected as PUBLIC
    -- Connected User is Valid
    RFS[1]: Assigned to RFS process 2148
    RFS[1]: Identified database type as 'physical standby'
    Redo Shipping Client Connected as PUBLIC
    -- Connected User is Valid
    RFS[2]: Assigned to RFS process 2384
    RFS[2]: Identified database type as 'physical standby'
    Redo Shipping Client Connected as PUBLIC
    -- Connected User is Valid
    RFS[3]: Assigned to RFS process 3188
    RFS[3]: Identified database type as 'physical standby'
    Primary database is in MAXIMUM PERFORMANCE mode
    Primary database is in MAXIMUM PERFORMANCE mode
    RFS[3]: No standby redo logfiles created
    Redo Shipping Client Connected as PUBLIC
    -- Connected User is Valid
    RFS[4]: Assigned to RFS process 3168
    RFS[4]: Identified database type as 'physical standby'
    RFS[4]: No standby redo logfiles created
    Primary database is in MAXIMUM PERFORMANCE mode
    RFS[3]: No standby redo logfiles created
    10. on Physical Standby database
    SELECT PROCESS, STATUS, THREAD#, SEQUENCE#, BLOCK#, BLOCKS FROM V$MANAGED_STANDBY;
    PROCESS STATUS THREAD# SEQUENCE# BLOCK# BLOCKS
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    RFS IDLE 0 0 0 0
    RFS IDLE 0 0 0 0
    RFS IDLE 1 9 13664 2
    RFS IDLE 0 0 0 0
    10) on Primary database:
    select message from v$dataguard_status;
    MESSAGE
    ARC0: Archival started
    ARC1: Archival started
    ARC2: Archival started
    ARC3: Archival started
    ARC4: Archival started
    ARC5: Archival started
    ARC6: Archival started
    ARC7: Archival started
    ARC8: Archival started
    ARC9: Archival started
    ARCa: Archival started
    ARCb: Archival started
    ARCc: Archival started
    ARCd: Archival started
    ARCe: Archival started
    ARCf: Archival started
    ARCg: Archival started
    ARCh: Archival started
    ARCi: Archival started
    ARCj: Archival started
    ARCk: Archival started
    ARCl: Archival started
    ARCm: Archival started
    ARCn: Archival started
    ARCo: Archival started
    ARCp: Archival started
    ARCq: Archival started
    ARCr: Archival started
    ARCs: Archival started
    ARCt: Archival started
    ARCm: Becoming the 'no FAL' ARCH
    ARCm: Becoming the 'no SRL' ARCH
    ARCd: Becoming the heartbeat ARCH
    Error 1034 received logging on to the standby
    Error 1034 received logging on to the standby
    LGWR: Error 1034 creating archivelog file 'luda'
    LNS: Failed to archive log 3 thread 1 sequence 7 (1034)
    FAL[server, ARCh]: Error 1034 creating remote archivelog file 'luda'
    11)on primary db
    select name,sequence#,applied from v$archived_log;
    NAME SEQUENCE# APP
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00003_0594204176.001 3 NO
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00004_0594204176.001 4 NO
    Luda 4 NO
    Luda 3 NO
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00005_0594204176.001 5 NO
    Luda 5 NO
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00006_0594204176.001 6 NO
    Luda 6 NO
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00007_0594204176.001 7 NO
    Luda 7 NO
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00008_0594204176.001 8 NO
    Luda 8 NO
    12) on standby db
    select name,sequence#,applied from v$archived_log;
    NAME SEQUENCE# APP
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00004_0594204176.001 4 NO
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00003_0594204176.001 3 NO
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00005_0594204176.001 5 NO
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00006_0594204176.001 6 NO
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00007_0594204176.001 7 NO
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00008_0594204176.001 8 NO
    13) my init.ora files
    On standby db
    irina.__db_cache_size=79691776
    irina.__java_pool_size=4194304
    irina.__large_pool_size=4194304
    irina.__shared_pool_size=75497472
    irina.__streams_pool_size=0
    *.audit_file_dest='C:\oracle\product\10.2.0\admin\luda\adump'
    *.background_dump_dest='C:\oracle\product\10.2.0\admin\luda\bdump'
    *.compatible='10.2.0.1.0'
    *.control_files='C:\oracle\product\10.2.0\oradata\luda\luda.ctl'
    *.core_dump_dest='C:\oracle\product\10.2.0\admin\luda\cdump'
    *.db_block_size=8192
    *.db_domain=''
    *.db_file_multiblock_read_count=16
    *.db_file_name_convert='luda','irina'
    *.db_name='irina'
    *.db_unique_name='luda'
    *.db_recovery_file_dest='C:\oracle\product\10.2.0\flash_recovery_area'
    *.db_recovery_file_dest_size=2147483648
    *.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
    *.fal_client='luda'
    *.fal_server='irina'
    *.job_queue_processes=10
    *.log_archive_config='DG_CONFIG=(irina,luda)'
    *.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/luda/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=luda'
    *.log_archive_dest_2='SERVICE=irina LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=irina'
    *.log_archive_dest_state_1='ENABLE'
    *.log_archive_dest_state_2='ENABLE'
    *.log_archive_max_processes=30
    *.log_file_name_convert='C:/oracle/product/10.2.0/oradata/irina/','C:/oracle/product/10.2.0/oradata/luda/'
    *.open_cursors=300
    *.pga_aggregate_target=16777216
    *.processes=150
    *.remote_login_passwordfile='EXCLUSIVE'
    *.sga_target=167772160
    *.standby_file_management='AUTO'
    *.undo_management='AUTO'
    *.undo_tablespace='UNDOTBS1'
    *.user_dump_dest='C:\oracle\product\10.2.0\admin\luda\udump'
    On primary db
    irina.__db_cache_size=79691776
    irina.__java_pool_size=4194304
    irina.__large_pool_size=4194304
    irina.__shared_pool_size=75497472
    irina.__streams_pool_size=0
    *.audit_file_dest='C:\oracle\product\10.2.0/admin/irina/adump'
    *.background_dump_dest='C:\oracle\product\10.2.0/admin/irina/bdump'
    *.compatible='10.2.0.1.0'
    *.control_files='C:\oracle\product\10.2.0\oradata\irina\control01.ctl','C:\oracle\product\10.2.0\oradata\irina\control02.ctl','C:\oracle\product\10.2.0\oradata\irina\control03.ctl'
    *.core_dump_dest='C:\oracle\product\10.2.0/admin/irina/cdump'
    *.db_block_size=8192
    *.db_domain=''
    *.db_file_multiblock_read_count=16
    *.db_file_name_convert='luda','irina'
    *.db_name='irina'
    *.db_recovery_file_dest='C:\oracle\product\10.2.0/flash_recovery_area'
    *.db_recovery_file_dest_size=2147483648
    *.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
    *.fal_client='irina'
    *.fal_server='luda'
    *.job_queue_processes=10
    *.log_archive_config='DG_CONFIG=(irina,luda)'
    *.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/irina/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=irina'
    *.log_archive_dest_2='SERVICE=luda LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=luda'
    *.log_archive_dest_state_1='ENABLE'
    *.log_archive_dest_state_2='ENABLE'
    *.log_archive_max_processes=30
    *.log_file_name_convert='C:/oracle/product/10.2.0/oradata/luda/','C:/oracle/product/10.2.0/oradata/irina/'
    *.open_cursors=300
    *.pga_aggregate_target=16777216
    *.processes=150
    *.remote_login_passwordfile='EXCLUSIVE'
    *.sga_target=167772160
    *.standby_file_management='AUTO'
    *.undo_management='AUTO'
    *.undo_tablespace='UNDOTBS1'
    *.user_dump_dest='C:\oracle\product\10.2.0/admin/irina/udump'
    Please help me!!!!

    Hi,
    After several tries my redo logs are applied now. I think in my case it had to do with the tnsnames.ora. At this moment I have both database in both tnsnames.ora files using the SID and not the SERVICE_NAME.
    Now I want to use DGMGRL. Adding a configuration and a stand-by database is working fine, but when I try to enable the configuration DGMGRL gives no feedback and it looks like it is hanging. The log, although says that it succeeded.
    In another session 'show configuration' results in the following, confirming that the enable succeeded.
    DGMGRL> show configuration
    Configuration
    Name: avhtest
    Enabled: YES
    Protection Mode: MaxPerformance
    Fast-Start Failover: DISABLED
    Databases:
    avhtest - Primary database
    avhtestls53 - Physical standby database
    Current status for "avhtest":
    Warning: ORA-16610: command 'ENABLE CONFIGURATION' in progress
    It there anybody that experienced the same problem and/or knows the solution to this?
    With kind regards,
    Martin Schaap

Maybe you are looking for