Changes only in iweb o9

Hi, I have searched these posts nad the web and haven't found the answer ( that I can understand:)) I have iweb 08, I publish to a folder and then upload to my isp web space through a third party ftp app. Every time I want to change I have to delete the site and re-upload, tiresome. I hear you can make changes in 09. What does that mean exactly? Can I change one photo? Delete and/or replace one page? Add text to one page? Do I upload the whole site and it just replaces the changes only, or .. ok, I am lost and a newbie as you can tell. Do I need to or should I use Apple's built in ftp now to accomplish those changes? Thanks for any help you can give:)

Welcome to the Apple Discussions. Have you cleared your browser's cache and reloaded the site?
If you have and still not see the changes publish the site to a permanent folder on the hard drive and open the site locally. If all the changes are there they the problem lies with the uploading of the files.
If you're using iWeb's ftp client try publishing to a folder and using a 3rd party ftp client likeCyberduck (free) or Transmit. I use Transit and find it easier to set up. Both can determine the new files and upload just the new ones. But for that to work you have to leave all of the files in that permanent folder between edits and republications.
OT

Similar Messages

Is there a way to only upload iWeb changes? I am not using MobileMe.

Is there a way to only upload iWeb changes? I am not using MobileMe.

One method you can use, along with optimizing your website for increased loading efficiency in browsers, is to publsh to a folder on your hard drive and use Web Site Maestro to optimize and upload only the new or modified files with its Smart Handling feature.
If you publish to a folder you can use the synchronizing feature of Cyberduck, help/en/howto/sync – Cyberduck, to upload only those new or changed files.
OT

Error logging on only for iWeb

I have changed no settings and have tried connecting on many different networks, but for the past 2 days every time I try to publish my changes to my iWeb site, the following happens:
- says "logging onto .Mac"
- creates pages
- says "There Was na Error Updating .Mac"
I see no one else having this problem here so I doubt it's a Me conversion issue. I'm able to access iDisk fine and my syncs seem to be working as well. Are software issues like this covered by AppleCare plans?

It's interesting that you should say this since I have taken a fairly good look at other threads in the iWeb08 discussions and only see one or two which describe similar issues, and in none is there a statement from Apple definitively advising on the root cause.
You'd think that being down for several days would at least warrant a spam to members about the status?

Why can't Apple make 'publish changes only' for non .mac users?

The recent iWeb update to 1.1 and the now increasingly obvious differential between .mac and non .mac features has prompted me to post here today.
I can understand comments, passwords and search facilities being a .mac only experience because it requires server side technology. I can also understand that .mac users get enhanced features like slideshows as well.
But why is the fundamentally *basic* option to 'publish the changes only' not available to non .mac users?
I know uploading to .mac uses a different protocol to uploading via FTP, but I don't think it is about that. Obviously the software engine in iWeb 1.1 can now track the pages that have changed, and flag those for uploading. So if the facility to do this is not available with non .mac uploading, is this some form of crippleware? Can any software engineers comment on this or am I talking off the top of my head? [And please mods, don't delete this post - I use the word 'crippleware' in its harshest form, clearly I can still use iWeb to make fantastic websites - I am asking a technical question here.]
Michael
A Trusty Quicksilver G4 Dual 1GHz

OK, from reading this thread:
http://discussions.apple.com/thread.jspa?threadID=486335&tstart=0
There is a pattern: An error occurred while publishing file “/blah/blah", while file "/blah/blah" seems to be random from one person to the next, but they all share one thing and that is communication protocol.
For iWeb to be able to publish changes to .Mac, it has to:
1. identify if the file exists
2. do the following:
2a. if not exists, copy it to .Mac
2b. if exist, do some sort comparison - CRC checksum -
2b1. if checksums match, don't copy
2b2. if checksums don't match copy it to .Mac
At least I think that's what going on, I don't have .Mac so that is best I can think of. Perhaps, some Apple SW engineers can jump in here.
Now, the bad part is iWeb has to (and I'm assuming iWeb uses WebDAV):
1. go thru each file locally
2. crawl its way into .Mac (WebDAV is a slow protocol) to find the the counter part.
3. when it finds a file that matches a client side file, it has to (some how) do checksum on-the-fly across the net work (which is slow and congested)
#3 is I think where it failed, there are many factors here: 1) networks congestion 2) latency 3) protocol overhead 4) checksum calculation time etc...
iWeb eventually times out because any/all of the above.
It's nice that WebDAV can author to the host yada, yada, but it's so SLOOOOOW.
What I would do is for every publishing, I would build a files and their checksums keep it on the host (or local, must be hidden).
For subsequence publishing, I would (use a fast protocol like FTP) download this pre-built files/checksums list. Locally, do a full publishing, making checksum comparison, the result is delta changes; upload only those. Build a new files/checksums list upload that too.
What I mean to say is offload everything that is possible to local machine, bandwidth is PREMIUM!

How can i change only one

hello,
i need a technique that changes only one side of box. For example a box should only growth in height (not in depth). The thing i'm trying to realize is an animated bar chart via java3d. In this bar chart boxes should represent the bars. With scaling i always manipulate two sides (e.g. positive y AND negative y).
Your help is greatly appreciated.
TNX in advance
JIVI

you could always just do the two-sided scale and then translate it to the correct position.
e.g. If height is 512 pix and you scale by 0.5, then it would shrink by 256 pix, or 128 on either side. Simply move it down 128 pix after scaling.

Password self-service errors - Password can be changed only once in a day

Hi experts,
We've been using password resets without issues for several months. Recently we upgraded from version 5.3 SP12 to SP14.
I've read the CUP release note that explains that how password resets now validates against the ABAP system parameter for login/password_change_waittime.
The errors we are experiencing happen even when the users' password is reset for the first time in a day.
Error message:
X Unable to reset password in the following system(s): ECDCLNT100. Password can be changed only once in a day
Please advise if you have experienced this error, if there is a resolution, and/or if there is a way to disable the parameter check.
FYI - We are only using password resets in our non-production systems and are not concerned with multiple daily password resets.
Thanks.

Hello
Are you using PSS with a CUA system?
Then you can try to upgrade the CUA to virsanh sp16.
or maybe this note: 1552707
KSM

Change only material qunatity in sales order by using BAPI

Hi All,
How to change only the material quantity in existing sales order by using BAPI.
Please help me in this regards.
Regards
Deekshitha.

Hi
See the sample code and do accordingly
REPORT Z_SALES_ORDER_CHANGE
NO STANDARD PAGE HEADING
LINE-SIZE 132
LINE-COUNT 65(0)
MESSAGE-ID ZZ.
TABLES: VBAP.
DATA:
V_FILEIN(90) TYPE C,
V_RECIN TYPE I,
V_RECVBAP TYPE I,
V_RECORDER TYPE I,
V_VBELN LIKE VBAP-VBELN,
ORDERHEADERINX LIKE BAPISDH1X.
DATA: BEGIN OF I_ORDERS OCCURS 0,
VBELN LIKE VBAK-VBELN,
POSNR LIKE VBAP-POSNR,
BRGEW(18) TYPE C,
VOLUM(18) TYPE C,
END OF I_ORDERS.
DATA: BEGIN OF I_OUTPUT OCCURS 0,
VBELN LIKE VBAK-VBELN,
POSNR LIKE VBAP-POSNR,
GEWEI LIKE VBAP-GEWEI,
BRGEW LIKE VBAP-BRGEW,
VOLUM LIKE VBAP-VOLUM,
CKWGT TYPE C,
CKVOL TYPE C,
END OF I_OUTPUT.
DATA: BEGIN OF ORDERITEMIN OCCURS 0.
INCLUDE STRUCTURE BAPISDITM.
DATA: END OF ORDERITEMIN.
DATA: BEGIN OF ORDERITEMINX OCCURS 0.
INCLUDE STRUCTURE BAPISDITMX.
DATA: END OF ORDERITEMINX.
DATA: BEGIN OF RETURN OCCURS 0.
INCLUDE STRUCTURE BAPIRET2.
DATA: END OF RETURN.
DATA: BEGIN OF BAPIRETURN OCCURS 0.
INCLUDE STRUCTURE BAPIRET2.
DATA: END OF BAPIRETURN.
PARAMETERS:
P_PATH(45) TYPE C DEFAULT '/usr/users/ftpsapom/' LOWER CASE,
P_FNAME(32) TYPE C DEFAULT '/sweetjo.txt' LOWER CASE.
START-OF-SELECTION.
CONCATENATE PATH AND FILE NAME INTO ONE VARIABLE
CONCATENATE P_PATH P_FNAME INTO V_FILEIN.
OPEN DATASET
IF V_FILEIN IS INITIAL.
MESSAGE E002 WITH 'FILE' V_FILEIN 'DOES NOT CONTAIN ANY DATA!'.
ELSE.
OPEN DATASET V_FILEIN
FOR INPUT
IN TEXT MODE.
IF SY-SUBRC = 0.
READ DATASET
DO.
READ DATASET V_FILEIN INTO I_ORDERS.
IF SY-SUBRC = 0.
APPEND I_ORDERS.
ELSE.
EXIT.
ENDIF.
ENDDO.
CLOSE DATASET
CLOSE DATASET V_FILEIN.
IF SY-SUBRC <> 0.
MESSAGE E002 WITH 'ERROR - CLOSING' V_FILEIN.
ENDIF.
ELSE.
MESSAGE E002 WITH 'ERROR - COULD NOT OPEN' V_FILEIN.
ENDIF.
ENDIF.
SORT AND REMOVE DUPLICATES FROM I_ORDERS
SORT I_ORDERS BY VBELN POSNR.
DELETE ADJACENT DUPLICATES FROM I_ORDERS.
POPULATE I_OUTPUT
LOOP AT I_ORDERS.
SHIFT I_ORDERS-POSNR LEFT DELETING LEADING SPACE.
CONCATENATE '0' I_ORDERS-POSNR INTO I_ORDERS-POSNR.
SELECT SINGLE BRGEW VOLUM
FROM VBAP
INTO (VBAP-BRGEW, VBAP-VOLUM)
WHERE VBELN = I_ORDERS-VBELN
AND POSNR = I_ORDERS-POSNR.
IF SY-SUBRC = 0.
IF VBAP-BRGEW = 0.
I_OUTPUT-CKWGT = 'X'.
ENDIF.
IF VBAP-VOLUM = 0.
I_OUTPUT-CKVOL = 'X'.
ENDIF.
I_OUTPUT-VBELN = I_ORDERS-VBELN.
I_OUTPUT-POSNR = I_ORDERS-POSNR.
I_OUTPUT-GEWEI = 'ST'.
I_OUTPUT-BRGEW = I_ORDERS-BRGEW.
I_OUTPUT-VOLUM = I_ORDERS-VOLUM.
APPEND I_OUTPUT.
CLEAR: I_OUTPUT.
ENDIF.
V_RECIN = V_RECIN + 1.
ENDLOOP.
POPULATE BAPI DATA AND RUN BAPI
CLEAR: ORDERHEADERINX, ORDERITEMIN, ORDERITEMINX,
RETURN, BAPIRETURN.
REFRESH: ORDERITEMIN, ORDERITEMINX, RETURN, BAPIRETURN.
ORDERHEADERINX-UPDATEFLAG = 'U'.
LOOP AT I_OUTPUT WHERE CKWGT = 'X' OR CKVOL = 'X'.
V_RECVBAP = V_RECVBAP + 1.
IF I_OUTPUT-VBELN <> V_VBELN AND SY-TABIX <> 1.
V_RECORDER = V_RECORDER + 1.
CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
EXPORTING
SALESDOCUMENT = V_VBELN
ORDER_HEADER_INX = ORDERHEADERINX
TABLES
RETURN = RETURN
ORDER_ITEM_IN = ORDERITEMIN
ORDER_ITEM_INX = ORDERITEMINX.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT = 'X'
IMPORTING
RETURN = BAPIRETURN.
WRITE OUT RETURN
LOOP AT RETURN.
WRITE: / RETURN.
ENDLOOP.
WRITE: / BAPIRETURN.
SKIP.
CLEAR: ORDERITEMIN, ORDERITEMINX,
RETURN, BAPIRETURN.
REFRESH: ORDERITEMIN, ORDERITEMINX, RETURN, BAPIRETURN.
ENDIF.
ORDERITEMIN-ITM_NUMBER = I_OUTPUT-POSNR.
ORDERITEMIN-UNTOF_WGHT = I_OUTPUT-GEWEI.
IF NOT I_OUTPUT-CKWGT IS INITIAL.
ORDERITEMIN-GROSS_WGHT = I_OUTPUT-BRGEW.
ORDERITEMINX-GROSS_WGHT = 'X'.
ENDIF.
IF NOT I_OUTPUT-CKVOL IS INITIAL.
ORDERITEMIN-VOLUME = I_OUTPUT-VOLUM.
ORDERITEMINX-VOLUME = 'X'.
ENDIF.
APPEND ORDERITEMIN.
ORDERITEMINX-ITM_NUMBER = I_OUTPUT-POSNR.
ORDERITEMINX-UNTOF_WGHT = 'X'.
ORDERITEMINX-UPDATEFLAG = 'U'.
APPEND ORDERITEMINX.
V_VBELN = I_OUTPUT-VBELN.
ENDLOOP.
RUN BAPI ON LAST ORDER
IF NOT ORDERITEMIN IS INITIAL.
V_RECORDER = V_RECORDER + 1.
CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
EXPORTING
SALESDOCUMENT = V_VBELN
ORDER_HEADER_INX = ORDERHEADERINX
TABLES
RETURN = RETURN
ORDER_ITEM_IN = ORDERITEMIN
ORDER_ITEM_INX = ORDERITEMINX.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT = 'X'
IMPORTING
RETURN = BAPIRETURN.
WRITE OUT RETURN
LOOP AT RETURN.
WRITE: / RETURN.
ENDLOOP.
WRITE: / BAPIRETURN.
SKIP.
ENDIF.
WRITE OUT RECORD COUNT FROM FILE
WRITE: / 'RECORD COUNT FROM FILE ', V_RECIN.
SKIP.
WRITE OUT RECORD COUNT FROM FILE
WRITE: / 'RECORD COUNT OF LINES TO CHANGE ', V_RECVBAP.
SKIP.
WRITE OUT RECORD COUNT FROM FILE
WRITE: / 'RECORD COUNT OF ORDERS TO CHANGE ', V_RECORDER.
SKIP.
TOP OF PAGE
TOP-OF-PAGE.
WRITE:/1(5) TEXT-H01, 6(8) SY-DATUM MM/DD/YY,
100(8) TEXT-H02, 126(8) SY-PAGNO.
WRITE:/1(5) TEXT-H03, 6(8) SY-UZEIT USING EDIT MASK '__:__:__',
20(77) TEXT-H04,
100(8) TEXT-H05, 108(25) SY-REPID.
WRITE:/1(6) TEXT-H06, 8(12) SY-UNAME,
20(4) TEXT-H07, 25(32) SY-HOST,
100(13) TEXT-H08, 121(8) SY-SYSID,
129 '/', 130(3) SY-MANDT.
ULINE.
SKIP.
Reward points if useful
Regards
Anji

Table cntrol field to be display/Change only For each record

Hi all,
How to set a particular Field in table control either as display only or
change only for each row based on certain condition.I need to set this property for each record in table control not for the entire coloumn?.I know the procedure for setting up an entire coloumn in table control either as diplay or change only using Loop at screen statement.
Conditions:
If Material is batch managed:
itab-batch field has to be Display only mode.
if material is not batch managed:
itab-batch field has to be change mode.
O/p of Table Control :
Material Batch
1000 Display only
2000 Change only
8000 Change only
3500 Display only
3600 Display only

Hi Ravi,
 Thanks for your reply.I have put the code as u said. It is modifying the whole coloumn insted of modifying Current row of the coloumn.
I have tried to modify the screen property using Table control attributes (TC-COLS).The following commented code is that logic.Even that also doing the same thing.Can yoy please tell me how to do it.
MODULE tc_get_lines OUTPUT.
LOOP AT SCREEN.
 IF screen-name = 'X_ZPINV-CHARG'.
 IF fg_batch = ' '.
 screen-input = 0.
 ELSE.
 screen-input = 1.
 ENDIF.
 ENDIF.
 MODIFY SCREEN.
ENDLOOP.
LOOP AT tc-cols INTO tc_wa
WHERE screen-name = 'X_ZPINV-CHARG'.
 IF x_zpinv-matnr IS NOT INITIAL.
 CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
 EXPORTING
 input = x_zpinv-matnr
 IMPORTING
 output = v_matnr.
 SELECT SINGLE * FROM marc WHERE matnr = v_matnr
 AND werks = w_plant.
 IF marc-xchar IS INITIAL.
 tc_wa-screen-input = 0.
 ELSE.
 tc_wa-screen-input = 1.
 ENDIF.
 MODIFY tc-cols FROM tc_wa INDEX sy-tabix." transporting screen-input
 ENDIF.
ENDLOOP.
ENDMODULE. "TC_GET_LINES OUTPUT

How to change only one attribute at the host

Hi experts,
we use host configuration with special host types. If we want to change only one attribute of the host with the cli we must change all attributes associates with the host. If we define only one new attribute all other values are set (back) to the default of the host type..
(in the gui all works fine...)
Is there a chance to change a only one attribute and keep all other attribute values of the host ?
Thanks,
Chris

No, it is not possible to do that.
All attributes (passed via -attr) are treated as a single argument to the host modification (similar to a name or description). Essentially, when you provide a -attr argument to hdb.h.mod, the command will reset the existing overridden attributes and consider only the new attributes coming thorugh the -attr arg for overriding.
You see it working from the UI properly because, the UI requests for overriding all atributes once again, even though you manually changed only one attribute.

I did a presentation with many images and animations, now I need to change only the images without modify the related animations. How can I do it?

I did a presentation with many images and animations, now I need to change only the images without modify the related animations. How can I do it?
I use Keynote 09

Select the image you want to change and go to Format Menu>Advanced>Define as Media Placeholder (or command, option, control i).

CLFMAS: Change only 1 caracteristic in a non-local material class

I try to modify a material's classification with CLFMAS.
I would like to change only one characteristic. The others ones must keep their old values.
CLFMAS erases everything, and I just have the new value of the caracteric I would change.
I use a non-local class.
Thanks in advance for your help.

We have the same issue just come up last night. A test on one class last week yielded the 2 record change history model (old value deleted, new value created). Applying the same change to a different material class, we get only the single record model - no help or oss notes seem to mention that there are two different change history models in SAP.
CHECK THIS -- check your single record change log in table CDPOS ... you may have values in both value_old and value_new fields there. The 2 record model stores value_old on the "deleted" record and value_new field value on the "created" record.
That still does not answer why there are two models and how one controls which model is implemented for change history on a class/characteristic ... but it sheds just a little more light on it.

How do I stop pop up that asks me, Do you want to save changes to doc... before closing? I have made no changes only printed the file. Using Adobe Reader DC, Windows 7 64 bit.

How do I stop pop up that asks me, Do you want to save changes to doc... before closing? I have made no changes only printed the file. Using Adobe Reader DC, Windows 7 64 bit.
This is very annoying and we need this stopped as we have made no changes to any of the adobe files. Please advise how to do this.
Customer Service DCC

I first tried the version without the deflated stream (so everything uncompressed) against the online repair tool to check/analyse it @ https://www.pdf-tools.com/osa/repair.aspx
And it says no error found, but the reader still want to save it when closing so i still had no clue at this point.
Fortunately, i finally found what was wrong with my generated PDF.
In my xref table, each object reference was not end by a full EOL, i only did put a newline char.
Now i have "carriage return" "newline" which is the full EOL and the reader is happy and close the file silently.
As suspected i did not follow correctly the specs on xref table
Now i'll go and figure what i did wrong with the deflate filter
Thanks for your help.

P.O change if i change only screen exit field the data is not saving

Hi ,
In the purchase order header custom tab i am added a screen exit field .In the purchase order creation mode the screen exit field is saving.But in the change mode if i am changing only the screen exit field then it is showing as 'no data to save' and not saving .But at the same time if i am changing some standard field with the screen exit field then both the field is saving.
I have to activate any field to save the screen exit field.Please let me know any exit to be activated for saving the data.
With Regards,
Ambrose

Hi
Pls keep a break-point in the PAI of Screen exit and check, whether it stops in change mode
Regards
Madhan D

Is there any bapi/Function module to change only header text in fb02

Hi ,
I want to change only header text in FB02 .the header text will come from a internal table.My Requirement is
1. open a document in FB02
2.change the header text of the document.
Right now i'm doing this through an BDC.but i'm looking for a BAPI /FM.
I Tried bapi_acc_gl_posting_post, fI_document_change..
is there any BAPI/FM for this???
Thanks,
Challa

You can use SAVE_TEXT FM
Thanks
Seshu

How do i set drive to update changes only when same name files are added

I Want to set up an external drive to update changes only when same name files are dragged from desktop can any one help?

That's still a little ambiguous. What recording software are you using?
Usually the individual sound files in a music project file are included in a separate folder. For example, GarageBand normally hides these files inside a single Project file in the Finder, but you can right-click and Show Package Contents to see the individual audio files.
Any of those backup utilities I mentioned will be smart enough to copy the new and changed files within the project file. In the Terminal these .band files are actually directories, just like .app Applications in the Finder are actually directories. I think Finder may actually handle it properly also, but I'm not really sure what the Finder will do when you re-copy a GarageBand project folder to an existing backup copy and only some of the audio files have changed.

Changes only in iweb o9

Similar Messages

Maybe you are looking for