Changes Printer Driver results Printing Error

Hi Gurus,
I'm having problem in printing. Recently, we changed the driver of our printer after that I'm not able to print already. Below is the problem
*SPOOL NO.     2      *USER 03:44 EPSON LQ300-II ZCHCK       Incorrect (SAPLPD reported error)
Message:             The processing SAPLPD is reporting an error
Date:                09.02.2010
Time:                03:50:59
Job status:          Completed
Error class:         Error
Area:                SAP Spool
Printout:            Not printed

 Hi
Welcome to the HP Forums!
Certainly i can help you with this issue.
Could you check the following setting in Printer drivers.
Go to Printer Properties -> Printing Preferences->Advanced tab
Under the Printer Features option click on “Graphic mode” , you will see two options.“Send graphic as Vector Optimize”  or “Send graphic as Raster”
Note : Toggle  b/w this two setting. Click OK to save 
Then next option you will see “Send TrueType as Bitmap” so Enable it then click Apply and click OK.Try printing and check. Other options  :  You can try installing HP Universal Print Driver for Windows PostScript (64-bit) Hope this should help If my post resolved your problem, please mark it as "Accepted as Solution"  +++++Say thanks by clicking the Kudos Star in the post++++++  Although I am an HP employee, I am speaking for myself and not for HP.

Similar Messages

  • How do you change the FILE "print code" resulting printed font size?

    I would like to adjust the "Print Code" resulting printed document font size. Though the changes can be made in display font for the Code window via a file or the Preferences Menu, I cannot find the style information to change the Print Code.
    Thanks

    Thanks again for your reply.
    I would like the code print out font to be a smaller size. Currently, it ls printing at 12 pt Monaco ( I can emulate this exactly by printing the same document in an editor set as Monaco 12pt ).  However, the settings (see below) are set at Monanco 9pt. This works on the screen, but not for printing.
    http://goo.gl/eXhnz   > screenshot of Setting show "smallest".
    Yet the code:print gives me more characters per line, resulting in  many more pages per printout. The "print preview" shown in my last message is exactly what the printed page looks like as well.
    NOTE: with the same settings ("smallest Monaco 9pt), Dreamweaver CS3 on OSX *does* code:print the smaller size, though without color coding. Dreamweaver CS 5 on my system does not.
    Thank you.
    Jay

  • Can't load print driver client forbidden error signed in as admin, mfp kyocera taskalfa 300ci

    can't load print driver client forbidden error signed in as admin, mfp kyocera taskalfa 300ci only mac on network,

    can't load print driver client forbidden error signed in as admin, mfp kyocera taskalfa 300ci only mac on network,

  • Anyone know why Adobe X & Adobe XI Crashes my shared network printer driver when printing a PDF

    Anyone know why Adobe X & Adobe XI Crashes my shared network printer driver when printing on a domain, this only happens when I print a PDF.
    I then have to restart the print spooler to get my printouts sent to the printer. I am using a Windows 7 32 & 64 bit environment on a domain. Users who aren't on the domain experience no issues and their printer drivers remain online and not grayed out.
    When I print a PDF using Foxit Reader or Nitro PDF then all works fine, the moment I open a PDF using Adobe Reader X or XI then the shared network printer driver bombs out and I am back restarting the print spooler. If we roll back to Adobe 9 then we dont have any issues.
    When you create a local printer driver all works fine, the problem is we don't encourage local printer drivers due to security.
    We use Ricoh printer drivers, the MPC5501 PCL5C, driver version 1.2.0.0 with PDK version 12.65. We have also tried the PCL6 printer driver and Universal printer driver. All give the same result. The printer uses Winiprint Print processor using RAW as the default data type.
    We have contacted Adobe Global Support who advised that they cannot assist with this query as this is on a Domain environment and we have to contact our IT Department.
    We would really appreciate some professional help here to get a fix for this issue in order to address potential future occurance's

    Try to turn off any video acceleration on your graphic driver for your graphics card.

  • Canon LBP6000 print driver - no printer appears in the 'add printer' section'  I have installed Mac CAPT Ve r340 and nothing shows.r

    I was having problems printing from my Canon LBP6000.  Print jobs remained held in the queue.  I uninstalled and reinstalled the Mac CAPT Ve r340 driver from Canon's website, no improvement.  The printer works fine with my Windows laptop.
    I found an option to remove all printers from the Print preferences section. I can't remember how I did this, but all printers were removed.  I reinstalled the above driver, but now in the 'print & scan' - 'add printer' section, I have no printer options.  And no idea how to get printer options.  So very open to advice.
    Thanks
    T.

    The ability to see the LBP6000 in the Add Printer view is not reliant on the printer driver but the USB cable. If you have the printers USB cable connected directly to the Mac, as opposed to having it connected to the Windows computer you mention or to some sort of USB hub, then it should appear in the Add Printer > Default view. If it does not show, then try another USB cable. You can also open System Information on the Mac and select the USB section in the left column. Then in the top right pane you will see all the USB busses on the Mac and the LBP should be seen under one of the busses if the USB cable is okay.
    With regards to the action to remove all printers, I would bet that you performed a reset of the printing system.

  • Reader wont use print driver on print server

    I recently posted this question on the user forum, my mistake, I know all the really smart people are over here!
    I have developed a print-driver with a very special purpose - it launches an application on the machine on which it is installed - and which also has an electronic signature pad connected to it - and captures a handwritten signature and embeds that into the pdf file just printed, keeping the document in electronic form.
    This means that if someone using computer A wants the person using computer B to sign a document, they just print that document to computer B's shared instance of this print driver. For this to happen, the print driver on the server computer must be used.
    There is an issue of "client-side" rendering implemented by MS since sometime after windows 2000. This can be disabled (at least turned off) and I have done everything I can do to force "server-side" rendering for this print driver.
    However, Reader and Acrobat simply won't honor these settings - in all cases these 2 insist on using the local copy of the driver (which must exist on the local computer too - windows now copies that driver from the server each time the server driver is updated).
    ALL other applications that I've tested faithfully send the document to the server's driver (though they also "exercise" the local driver for some reason, I can see this through logging when it is activated - but I cannot see where/why the printing subsystem is making the decision to forward it on).
    To recap - other applications faithfully "render" using the server's driver on the server machine, Acrobat and Reader render using the client driver on the client machine.
    I am more than willing to develop a print provider, print processor, or port monitor for my print driver - if I knew enough about which one of these is best targeted for this particular problem. It was hair pulling enough to figure out how to do the driver to begin with, this time I'd really appreciate any advice about which one of these I need to tackle rather than spend days developing one realizing I should have developed the other.
    Or ... if there is something I need to set in Reader/Acrobat properties OR something in the print driver itself (which is, BTW, based on MS pscript5, i.e., not monolithic) that I might need to do ?
    Thanks very much for the help
    Nate Clark

    Hi,
    Have you tried the following steps:
    1. Delete the printer from control panel -> printers
    2. Open Services.msc and stop and start the Print Spooler service
    3. Open Print Management(Open command prompt, type in printmanagement.msc or type print management in to the start menu search box)
    4. In Custom Filters -> All Drivers right click the printer driver you want to remove and select Remove Driver Package
    Thanks.

  • Need printer driver (HP printer) to work with Snow Leopard:

    My Imac came with Tiger, and I recently had it upgraged (by Apple professionals) to Snow Leopard, but I need a printer driver for my HP Business Inkjet 1200. I got no help from HP. Any suggestions? (And I don't speak "computer-ese" so please spell it out in easy steps for this dinosaur. Thanks!)

    probably my misuse of 'best' - by 'best' I meant one that actually operates properly with full functionality.
    I have been using HP for a while and always find that there is one little bit of the app that does not work with Mac and in the past HP have always said 'oh well we don't design for Mac'.
    What I want to know is, what works properly ?

  • Acrobat Printing Driver results in blank pages

    I had Acrobat 9 Pro installed under Windows 7 Professional. I uninstalled the software to move it to my Windows 7 Enterprise Operating System and apply all the updates. When I attempt to print a web page I am receiving a blank page or a one page PDF file with just the web page name at the top of the page. Moving Acrobat back to Windows 7 Professional works OK. All my other programs including CS5 work OK under Windows 7 Enterprise without any issues.
    Thank you all in advance for all your help.

    edbedb,
    What software are you using for scanning and which HP device do you have?
    Just trying to help.
    Andrew

  • Keep losing my print driver and printer quits working

    Have no idea what's going on.  Recently, I can't keep my printer workng.  It worked fine since I got it approx 1 year ago.  It's a Canon Imageclass D400 Series combined printer, copier, fax and scanner.
    Now after I reboot both sometimes it will work, but only one time.  The next time it won't work again.  Sometimes, I reboot both and it still won't recognize the printer.  I'm dumbfounded as to what's going on.  I put in the CD to reinstall the driver but it says that I can't reinstall it because it's already installed.  In System Prefs I go to print and try the utility but it doesn't recognize it.  I can't figure out how to delete the previous driver and do a reinstall, can anyone tell me how to delete the old one?  Or, if anyone knows what the problem is, it would be greatly appreciated if you could help...it's driving (no pun intended) me crazy.
    Thanks,
    Jim

    Just found this, you might want  to try it. It worked for me.
    Resetting the printing system in Mac OS X 10.5.x
    To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
    Choose System Preferences from the Apple menu.
    Choose Print & Fax from the View menu.
    Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..."
        As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.

  • Attaching USB External Drive Results in Error Message

    I hope this is the right forum to seek help on this issue, and I hope someone can help...
    I have a 500 gig external hard drive hooked up to my AEBS. Because the issue I describe at the forum topic below continues, I access it by going to the "Go Menu" and choosing "Connect to Server."
    http://discussions.apple.com/thread.jspa?threadID=1255400&tstart=0
    Yesterday, I tried to connect the drive directly to my Macbook Pro, and it did not appear to mount (normally a little globe icon would appear on my desktop, this time it did not.) So I navigated to "/volumes" and found what appeared to be the icon I was seeking that would allow me to open the drive. However, when I try to open it, I get the following error message:
    "500 gig could not be opened because the original item could not be found."
    At that point, I have 3 options:
    Delete Alias
    Fix Alias
    Cancel
    Attempting to delete the alias results in a message stating I do not have sufficient privileges for such a maneuver. Attempting to fix the alias puts me into my finder/file directory as if I'm supposed to navigate to a file.
    Other interesting fun:
    * The drive appears in Disk Utility when I plug it into my Macbook Pro, and I can mount, unmount, and eject it there.
    * In Disk Utility, it says that the file structure is "Mac OS Extended (Journaled)" - which is how I formatted it when I first got the drive and plugged it into my Macbook Pro.
    * When I "get info" on the icon in "volumes", it says that the owner is "system."
    * When I connect to the drive via AEBS and choose "get info" on the icon, it says that it is formatted as "windows file sharing."
    * My privileges when it is routed through my AEBS say I can "Read & Write."
    I have searched this error message on the 'internets' and in this forum, but the hits I encounter seem to involve connecting to Windows servers with a Mac.
    As you can probably tell, my level of computer knowledge is only about enough to get me in trouble. Any help or direction is appreciated..

    Never found or heard an answer for this. Since I could access the drive wirelessly through my router, I ended up copying everything over to my laptop (50+ Gigs - took HOURS), and then reformatted the disk with Disk Utility. I can now access it by hooking it directly into the laptop. I'm now moving everything back and setting this topic to answered.

  • HP Cloud Print Driver for Windows Server 2003?

    Hello,
    I have a unique (complicated) situation that I am trying to find a solution for.
    Here is the deal,
    My company is trying to set up a temporary remote branch location inside a building where we are unable to wire a network. Our solution is to use a wireless hotspot. Connected to this hotspot, we will have an iPad and an HP Laserjet M525.
    The iPad will be connecting to our Citrix environment over VPN through Citrix Receiver to deliver a desktop interface to the iPad. This is needed to access a few applications that are used at the branch.
    The problem now is printing, AirPrint wont work because the iPad is on VPN (and its at a windows interface, not the iPad's).
    I had the idea of using the HP printers built in ePrint function to print, so I set that up. So now sending at email to [email protected] prints to the HP printer attached to the wireless hotspot.
    Emaling to print works, but ideally, I would like this printer to show up in the Windows Devices and Printers, so that the user can just click print, choose the HP printer, and it will print, (with a delay obviously as its sending an email).
    So I downloaded the HP ePrint Windows Driver, which has to be installed on the main Citrix servers so that the users session can grab the printer and use it, turns out the driver doesnt work on Windows Server 2003. 
    My first attempt at a workaround was Google Cloud Print, which was fairly simple to connect to HP ePrint, but apparently the Google Cloud Print Driver doesnt work on Windows Server 2003 either.
    Is there a version of the HP ePrint Driver out there that works on Windows Server 2003?
    tldr:
    I would like to print to a remote HP printer that is connected to a wifi hotspot from our internal network. I need whatever software I download to be compatible with Server 2003.
    I understand this is over complicated but thanks for any input.

    I believe I understand your issue.  You would like to use a print driver to print to your HP ePrint enabled printer from your apps that are hosted by Citrix server.  While I believe this makes perfect sense, HP does not have a print driver that officially supports MS TS or Citrix that also supports the ePrint Cloud path.  The reason for this is the ePrint windows driver is a "dynamic" print driver (similar to HP UPD dynamic mode) that handles multiple print paths (tcp/ip, wireless direct, cloud, etc) in a single driver instance by dynamically changing the port the print queue is bound to so the port is specific to the delivery path.  For example, if printing to a network printer it will use a MS Standard tcp/ip port.  If printing to the ePrint cloud a custom port is used, etc.  Well, if you have lots of Citrix users trying to print to a single print queue, but to different destinations, the users would be colliding with each other when they print by having the driver trying to change the print queue to different print ports at the same time.
    What you could do is install an ePrint print queue on the citrix server if you can control the access to that queue to just your local branch users.  Also, if you only have on ePrint enabled printer the situation is even better as only one port will be needed by that queue.  You can find the ePrint software at www.hp.com/go/eprintsoftware   You might want to download the version of the driver that supports XP as Windows 2003 is very similar print system.
    NOTE:  this is not a supported environment for this driver.  You would be using it without warrenty or support and no promises are being made here.
    Good luck if you choose this path and please post back the results.  Thanks!

  • Snow Leopard Updated Epson Printer Driver for Epson R800 - poor colour !

    I just installed through software update the latest epson printer drivers and, then, deleted the Epson R800 from my printer list and added it back in (with the new printer driver). I did find a slightly different printer dialog box and found the setting of "presets" worked now (it did not previously).
    However, when I printed out of Adobe Lightroom 2.6, using a custom paper profile and no colour management, that the print was faded, the colours were washed out. The result was unacceptable. After a few attempts, I looked in the Library folder, printers, epson and found two folders labeled, "inkjet printer" and "inkjet printer2". I determined that "inkjetprinter2" was the new folder and deleted it and deleted/added in my Epson r800 (using "inkjetprinter" folder. The resulting print was perfect.
    So, my conclusion is that the new driver is not functioning as it should and I would warn users to be prepared for problems. Am I missing something here? Could I have done the updating of the printer driver and printer differently?

    You may need to recalibrate you monitor color settings.
    One of the things that changed from 10.5 to 10.6 was gamma; if you are using calibration from 10.5 or earlier, the gamma change will throw off print colors.
    Personally, on my last 2 epson printers (R300, RX685), I've configured to let the printer color manage, and used the Vivid setting.
    Have not had any off colors, etc.

  • Gimp-Print Driver GenericClass: Waiting for device

    I am running OS X 1.4.8 and I have an HP Photosmart printer connected via USB. I installed the HP print driver and associated utilities. I have added the printer through the Printer setup utility and selected the Photosmart 1100 series driver, which uses the gimp-print 5.0.0 driver.
    I can connect to the printer through HP's test and calibration utility and I can access the printer, send test pages, calibration etc. However, when sending a plain text file or any other file through the normal print driver, Nothinig prints. If you open the print monitor, it shows the message " GenericClass: waiting for device". I attempted to replace the USB cable and connect to another USB port, when you start the printer again it displays: "GIMP-PRINT: Ready to Print" and then the "GenericClass: Waiting for device" message.
    I am stumped on where to go next.
    Any help would be appreciated.
    Thanks

    I fixed my issue with the HP 3180 printer!! Here's what I did:
    1. I followed the HP document that I posted earlier step by step.
    2. I downloaded the latest drivers/software from HP, reset the printer queues and then tried to add the printer. This did not work at all.
    3. I took a look at the error log and found this:
    E [19/Nov/2007:21:51:31 -0500] LoadAllClasses: Unable to open /private/etc/cups/classes.conf - No such file or directory
    I went out on the MacWorld boards and found that the file in the error is deleted when the printer queues are cleared and recreated when the printer is initialized. So I'm not sure the issue is related to the message.
    Since my issues started after I applied the update from Apple from the auto software update that popped up on my MacBook, I decided to try to fix it by downloading the update directly from Apple.com and reapplying it again just in case something was hosed up with the auto software update:
    http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10411comboupdat eintel.html
    After it ran, I installed the printer software and drivers and the C3180 re-established connections and printing & scanning work perfect again. Hope this helps!

  • PDF printer driver file naming issue

    Hello, I'm not sure if I'm in the right place for this question but here goes. When I use the PDF printer driver to "print" a PDF file from InDesign or Illustrator, the file name is appended with extra information I don't want. For example, I want just "FileName.pdf, but what comes up in the dialog box is: FileName.ai @50% (CMYK-Preview).pdf. So I have to waste time deleting the extra information. Is there any way to turn this off? Is the PDF printer driver causing this or is it a feature of InDesign or Illustrator? All of us in our art department have looked for an answer to this but can't find even a mention of this on the forums. It's really frustrating!
    Thanks in advance for your help.
    Tom

    I think the title may be coming from the caption of the window that is
    open. If so, try printing from a window when you are NOT in CMYK
    preview, 50% etc.
    Aandi Inston

  • Is there a PDF print driver for ipad

    I want to be able to print individual pages from an excel file so i can email them. So i am looking for a print driver or print program to make this happen
    Some of the apps i have a re polaris office, expert PDF, Adobe.

    First, do you have Apple's own “Numbers”? It's not only able to export / mail PDF files from inside the app (unfortunately, there's no “Send to” inside – this has always been a problem), but also do it textually – as opposed to just making a screenshot of the current screen and making a PDF of it by accessing the screenshot in the Camera Roll in a PNG->PDF-conversion capable PDF reader.
    If you still want to go the second way, I've tested most of the PDF / generic docs readers I have.
    The ones supporting image → PDF conversion are as follows:
    PDF Reader Pro (Yuyao; $6; http://itunes.apple.com/us/app/pdf-reader-pro/id300298606?mt=8 ) (can convert single images only!)
    PDF Reader (Kdan Mobile Software; http://www.kdanmobile.com/en/pdf-reader/ ; http://itunes.apple.com/us/app/pdf-reader-ipad-edition/id367816156?mt=8 ; $5) (several in one! Just follow the built-in help at “i” icon at the bottom left > select PDF Scanner)
    PDF Reader Pro (iTech; http://itunes.apple.com/us/app/pdf-reader-pro-edition-for/id364502063?mt=8 ; $10) (multiple; tap the “Scan” icon at the bottom center, tap the film cartridge icon in the bottom left; tap all images you want to import; when you're finished, tap “Make PDF” (second icon on the bottom left)
    Readers that can't:
    GoodReader (for iPad)
    ReaddleDocs
    QuickOffice Pro HD
    SimplyPDF
    PDF Comrade
    iPDFReader by Tatvasoft
    PDFMate
    PDF Juggler
    CloudReaders
    BookMan
    PDF Viewer
    DocsScan HD
    ReadDemon
    ReadPDF
    PDF Reader
    PaperDesk
    Easy PDF
    File Viewer
    FastPDF+
    iPDF
    PDF HD
    MyPDFs
    iRead PDF  (Aji)
    iAnnotate PDF
    DocAS Reader
    Adobe Reader
    Crashes under iOS 5.1.1:
    Quick PDF+

Maybe you are looking for