Changes required after adding the sap server in domain (Visual Admin )

Hi All,
Yesterday we added our SAP Server (ABAP+JAVA) in our organization domain, Pls let me know what entries do I need to make in Visual Administrator and Configtool????
Regards,
Prashant

Prashant,
Your request is not clear. What do you mean by added to the domain?
But if you have connected exisiting sap system on the network (ABAP+JAVA) then visual administrator should work as it is. Please check your network connections are ok.
Hope this helps.
Manoj

Similar Messages

Problem in starting services after rebooting the sap server.

Hi ,
I got a problem in starting SAP services files in SAP BI system on windows 2003 server. Whenever I reboot the system all sap services failed to start throw a message u201CCould not start SAPBDJ_00 service on local computer. Error 1069: The service did not start due to login failure".
This is the common message for every sap service SAP<SID>_00,SAPOSCOLL,SAPCMSr.01,SAPSMD_98. Until unless I maintain ./SAPservice<SID> password externally by going through service.msc and g to properties of particular service and g to logon option to maintain password manually to fix this.
./SAPService<SID> user is no locked and password maintained properly also I tried to change the service user to SIDADM user and restarted the server however getting the same problem.
Could not find any fixes in internet so please help me to fix this issue.
Regards,
Vinod

Hi Sunil,
we are in midde of BI implementation. last week we built the DEv box and Updated kernel and suport packs and restarted then i observerved this issue. I have already tried to change the SIDADm user but intially after changing the user service will start and once you restart the server then the issues appear again.
The password which i am using was the one set during the installation.
Please suggest.
Regards,
Vinod

Problem while Adding the SAP Web service in Visual Studio 2005

Hi all,
I have created the web service thru SOAMANAGER.
Now I am just trying to access that web service in Visual Studio 2005.
I am not able to access...
Please give me the procedure , if any body knows.
-Balajee Jeyaraj.

- Start Tcode SOAMANAGER
- Now it depends on your setup, you might have to press "Logon" and.......logon
- Click tab "Business Administration"
- Click "Web Service Administration"
- Choose "Service" for "Search by"
- Enter a search pattern (E g Z*) and press "Go"
- Mark the line of your web service
- Press "Apply Selection"
- Click the link "Open WSDL document for selected binding"
- your web browser opens.
- copy and paste the link into Visual Studio.
I'm always adding &wsdl=1.1 at the end of the link.

UDF in documents lines that can be Change after adding the doc.

Dear all
How can i create a UDF in documents lines that can be change after adding the doc? He need to mark some of the lines to already audit or not audit and the date of the action.
Kind Regards
Margarida

It also depends on what documents you are wanting to add these comments to. On documents such as the A/R Invoice/ Delivery, and A/P Invoice/ Goods Receipt PO you cannot change the UDFs on the line item after the document is added (regardless of whether the document is closed). Sales Orders/ Quotes and Purchase Orders line item UDFs can be changed as long as the line hasn't been closed (or partially received/delivered/invoiced).
Hopefully that makes sense. I could give more of an explanation if I knew what documents you were wanting to add these line item comments to.

I fail to start the sap server with error:Operating system call recv failed

I fail to start the sap server in SAP R3 Management Console and the message in the syslog was :
R/3 Basis System: Operating system call           recv failed (error no. 10053)
Is there any one could tell me how to resolve the problem or give me some advice?I will appreciate him/her very much.Thank you.

trc file: "dev_disp", trc level: 1, release: "620"
Sun May 07 13:14:30 2000
kernel runs with dp version 3(ext=1) (@(#) DPLIB-INT-VERSION-3)
length of sys_adm_ext is 304 bytes
systemid   560 (PC with Windows NT)
relno      6200
patchlevel 0
patchno    674
intno      20020600
pid        3628
***LOG Q00=> DpSapEnvInit, DPStart (00 3628) [dpxxdisp.c   978]
     shared lib "dw_xml.dll" version 674 successfully loaded
     shared lib "dw_xtc.dll" version 674 successfully loaded
     shared lib "dw_stl.dll" version 674 successfully loaded
Sun May 07 13:14:32 2000
WARNING => DpNetCheck: NiAddrToHostCanon() took 2 seconds
Sun May 07 13:14:37 2000
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3212]
MtxInit: -2 0 0
DpShMCreate: sizeof(wp_adm)          12784     (752)
DpShMCreate: sizeof(tm_adm)          1690816     (8412)
DpShMCreate: sizeof(wp_ca_adm)     18000     (60)
DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
DpShMCreate: sizeof(comm_adm)     192000     (384)
DpShMCreate: sizeof(wall_adm)     (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY          (addr: 001E0040, size: 1977824)
DpShMCreate: allocated sys_adm at 001E0040
DpShMCreate: allocated wp_adm at 001E0560
DpShMCreate: allocated tm_adm_list at 001E3750
DpShMCreate: allocated tm_adm at 001E3778
DpShMCreate: allocated wp_ca_adm at 00380438
DpShMCreate: allocated appc_ca_adm at 00384A88
DpShMCreate: allocated comm_adm_list at 003861F8
DpShMCreate: allocated comm_adm at 00386210
DpShMCreate: allocated ca_info at 003B5010
DpShMCreate: allocated wall_adm at 003B5018
MBUF state OFF
Sun May 07 13:14:38 2000
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 2458 MB
<ES> 2457 blocks reserved for free list.
ES initialized.
***LOG Q0K=> DpMsAttach, mscon ( db01) [dpxxdisp.c   9115]
CCMS: Initalizing shared memory of size 20000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6200, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   941]
DpMsgAdmin: Set patchno for this platform to 674
Release check o.K.
Sun May 07 13:15:18 2000
ERROR => W2 (pid 4776) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W2
Sun May 07 13:15:38 2000
ERROR => W5 (pid 4548) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W5
ERROR => W8 (pid 4592) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W8
ERROR => W9 (pid 4584) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W9
ERROR => W12 (pid 4676) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W12
ERROR => W13 (pid 4272) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W13
my types changed after wp death/restart 0xbf --> 0xb7
Sun May 07 13:15:58 2000
ERROR => W4 (pid 4888) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W4
ERROR => W6 (pid 4788) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W6
ERROR => W15 (pid 4596) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W15
Sun May 07 13:16:18 2000
ERROR => W1 (pid 4892) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W1
ERROR => W3 (pid 4904) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W3
ERROR => W7 (pid 4000) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W7
ERROR => W10 (pid 4864) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W10
my types changed after wp death/restart 0xb7 --> 0xb5
Sun May 07 13:16:38 2000
ERROR => W0 (pid 4900) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W0
ERROR => W11 (pid 4500) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W11
ERROR => W14 (pid 4636) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W14
ERROR => W16 (pid 3532) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W16
my types changed after wp death/restart 0xb5 --> 0x80
DP_FATAL_ERROR => DpEnvCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
DpModState: change server state from STARTING to SHUTDOWN
Sun May 07 13:16:42 2000
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   9341]
MBUF state OFF
MBUF component DOWN
***LOG Q05=> DpHalt, DPStop ( 3628) [dpxxdisp.c   7883]

Post PDF to the SAP server and ftp it

I got requirements regarding: (Based on SAP Script)
1) Convert OTF to PDF file
2) Post this PDF file into the SAP Server
3) FTP it to another server
Is there anyone provide me an example source code of the step 2 and 3?

Hi,
Try this Funciton Module <b>/SAPDMC/LSM_F4_FRONTEND_FILE</b>,
also Please try this Function Module, <b>C13Z_UPLOAD</b>. Might be helpful. Feel free to revert back.
Here is a sample program.
report zrich_0002 .
parameters: source type localfile,
            destin type localfile.
at selection-screen on value-request for source.
call function 'KD_GET_FILENAME_ON_F4'
       exporting
            static    = 'X'
       changing
            file_name = source.
at selection-screen on value-request for destin.
call function 'KD_GET_FILENAME_ON_F4'
       exporting
            static    = 'X'
       changing
            file_name = destin.
start-of-selection.
data: xsource type string.
data: xdestin type string.
xsource = source.
xdestin = destin.
call method cl_gui_frontend_services=>file_copy
    exporting
      source             = xsource
      destination        = xdestin
   OVERWRITE          = SPACE
    exceptions
      cntl_error         = 1
      error_no_gui       = 2
      wrong_parameter    = 3
      disk_full          = 4
      access_denied      = 5
      file_not_found     = 6
      destination_exists = 7
      unknown_error      = 8
      path_not_found     = 9
      disk_write_protect = 10
      drive_not_ready    = 11
      others             = 12.
Feel free to revert back.
--Ragu

SAP Client to the SAP Server: internal Error (-1102)[Message 131-183]

Hi,
We are using Windows 2008 Server R2, SQL 2008 Standard, SAP B1 8.81 PL08.
When we trying to connect SAP Client to the SAP Server. There has internal Error (-1102) occurred. We can view the database on client, but we always get the same error message after enter the User ID and Password. We have checked the native client and it is installed and also opened the following ports: 1433, 30000, 30001. We have tried to open all of firewall, but itu2019s no use.
When I set a computer in to the engine room and set the network connection, this one can connect SAP Client to the SAP Server.
But when client connect to server by VPN, the IP address will not in the same section. Then We tried to set the IP address has the same network section with the server, but it's still disable.
I set a computer for SAP Server without firewall, complex network, virtual IP and no router in my office. And use a SAP Client which is in different network domain to connect to SAP Server by internet, not VPN, but the SAP Client still canu2019t connect to SAP Server. I get the same internal Error (-1102).
It can not only ping to SAP Server IP, but telnet to the port 1433, 30000, 30001, 445.
When I use a pc with server tools, it can connect to the SAP Server by the localhost license. But if I use a computer only install client and assign the server license. The latter one always got the error.
How could we solve this problem? Is there has another setting I am missing which might be blocking the connection?
Thanks in advance.

Hi,
We are using VPN and using Terminal Licensing or Remote Desktop Conneciton.
The idea here is VPN will connect you to the network and when you are connected to the network
dont use the direct LAN IP connection use the Terminal Licensing to connect.
Again both are needed VPN and Terminal Licensing. VPN for the connection and if successfully connected
use or connect from Terminal Licensing or Remote Desktop connections.
Thanks.
Clint

A/P Invoice Vendor Ref Number Field updating after adding the Invoice Copy

Hi All,
              I am able to change the Vendor Reference number in A/P Invoice Document after adding the Document. I want to restrict this to happen. Plzz help how to do this????
Regards,
Sree.

1.The Modify Posted A/P Documents authorization refers to some fields only, e.g. the Due Date or Pay to address.
2. Additional authorization can be defined only for full forms, not for fields.
3. The SP Joseph suggests will refuse those modifications when the Vendor ref is empty.
To avoid modifying the Vendor ref you can use this code:
IF @Object_type = N'18' and @transaction_type = N'U'
BEGIN
declare @li int
set @li=
(select max(t.LogInstanc)
   from ADOC t
   where t.ObjType=18 and t.DocEntry=@list_of_cols_val_tab_del)
IF
   (select isnull(t.NumAtCard,'')
    from ADOC t
    where t.ObjType=18 and t.DocEntry=@list_of_cols_val_tab_del
      and t.LogInstanc=@li-1)
!=(select isnull(t.NumAtCard,'')
   from OPCH t
   where t.DocEntry=@list_of_cols_val_tab_del)
begin
Set @error = 10
Set @error_message = N'Vendor refernce not modifiable !'
end
END
Or if you want to allow modifying an unfilled reference, then this:
IF @Object_type = N'18' and @transaction_type = N'U'
BEGIN
declare @li int
declare @pref nvarchar(100)
set @li=
(select max(t.LogInstanc)
   from ADOC t
   where t.ObjType=18 and t.DocEntry=@list_of_cols_val_tab_del)
set @pref=
(select isnull(t.NumAtCard,'')
    from ADOC t
    where t.ObjType=18 and t.DocEntry=@list_of_cols_val_tab_del
      and t.LogInstanc=@li-1)
If @pref !='' and @pref !=
(select isnull(t.NumAtCard,'')
   from OPCH t
   where t.DocEntry=@list_of_cols_val_tab_del)
begin
Set @error = 10
Set @error_message = N'Filled vendor refernce not modifiable !'
end
END

My MacBook Air is not being listed under the My Products tab after adding the Apple Care Protection Plan

I purchased my MacBook Air from US in December 2013, my company paid for it, so it got listed under their account earlier. So I asked them to remove it from there account and then I added it back to my profile in January 2014. Then it was listed under My Products tab in the My Support Profile page. Later I bought Apple Care Protection Plan for this MBA, and registered that plan with my MBA's serial number and soon after that, MBA vanished from My Products. I thought it might take some time for it to get listed back again after adding the protection plan, but it didn't appeared for quite a long time and so now I am opening this support ticket.
Now whenever I try to add my MBA again by clicking Register New Product, I am getting "According to our records, this serial number is registered to another Apple ID. If you have more than one Apple ID, log in to My Support Profile with that Apple ID to see your other registered products. Not sure if you have another Apple ID?" How can I get my MBA back into my profile?

AppleCare does not cover accidental damage, but try taking it to an Apple Store and see what they say!

Command to start the SAP Server in AIX Machine

What is the command to start the SAP Server in Unix Environment

Hi Balaji,
To start sap you just type startsap on the command prompt... are you getting any specific errors?
Also read,
http://help.sap.com/saphelp_nw04s/helpdata/en/70/b38937809c8f71e10000009b38f842/frameset.htm
Regards
Juan

Starting the sap server using startsap program .

Hi ,
platform AS400 R3/DB2
For manually starting the sap server using startsap program .
startsap sid(c44) instance(44) profile('/usr/sap/c44/sys/profile/what profile?)
I want to clear my doubt in the above command, which profile can be given for the above startsap command?
please help.
Regards
Hany.

Hany,
Is there more than one instance of SAP running on this server? Usually a 'startsap' or "startsap R3" - if the db is started already - will work.
Otherwise, you'll want to use the instance profile of what your attempting to start. Remember there are 3 profiles in the folder - Default, start, and instance.
Try to start with the instance profile.
-Tim

Even after adding the country code i can't seem to make any international calls.im not sure if this is relevant but apparently, the option dial assist is not to be found on my setting.pls direct me...thank you.and my phone moddle is 5s(A1457)gold

even after adding the country code i can't seem to make any international calls.im not sure if this is relevant but apparently, the option dial assist is not to be found on my setting.pls direct me...thank you.and my phone moddle is 5s(A1457)gold eddition.

Hi, Thilina66. You say you have entered the country code but still cannot make international calls. I suppose you are adding the international access code before the country code. This internaltional access code (011 in the US, 00 in Europe, etc.) can be substituted by adding a + sign before the country code.
For example, to call a number in the UK from the US you have to dial:
011 44 7540 267898
or
+44 7540 267898
To call a number in the US from the UK you have to dial:
00 1 212 456 1470
or
+1 212 456 1470
Please check that the contact number in your address book is correctly written if you are dialing directly from the address book or that you enter the correct numbers in the keyboard if you are dialing from the keyboard.

How to access the SAP Server Console? Through VPN

How to access the SAP Server Console? Through VPN
Sudhakar

Hi,
You need to contact your system admin as they will enable the port in ur system so that u can access client servers.It should also be allowed from client side also i mean access.
You will connect thru weblink with user name and pw and SAP with logon details.
Thanks
Suresh

Error (2931) VMM is unable to complete the request. The connection to the VMM agent on the virtualization server (host.domain.local) was lost.

Experts,
kindly advice for this error when create vm from a templates, while i'm not having this issue when create the vm to another host from the same templates,
firewall is disabled and no antivirus on the host.
The network and the ping is very stable, and the WS-Management service is running on the host,
Host : windows server 2012 R2
VMM : 2012 R2 3.2.7895.0
VMM updated from RU2 to RU5
Error (2931)
VMM is unable to complete the request. The connection to the VMM agent on the virtualization server (host.domain.local) was lost.
Unknown error (0x80338029)
Recommended Action
Ensure that the Windows Remote Management (WS-Management) service and the VMM agent are installed and running and that a firewall is not blocking HTTPS traffic.
This can also happen due to DNS issues. Try and see if the server (ms-lab-01.eccsolutions.local) is reachable over the network and can be looked up in DNS. You can ping the virtualization server from VMM management server and make sure that the
IP address returned matches the IP address locally obtained from the virtualization server.
If the error still persists, restart the virtualization server, and then try the operation again.
Ahmad Samir | MCSE 2003, MCSE 2012 Private Cloud | MCTS: SCOM 2007, Lync 2010, Exchange 2010.

Ok I will try another template,
and the drop happen in the customization after deploying the VHDX file as my first image.
I had this answer from partner forum. but i didn't try it yet
Backup your VMM database and then check the
tbl_VMM_Lock table in the
VMM database to see if it has any locks listed, do this after stopping the System Center Virtual Machine Manager Service.
If there are locks listed in the tbl_VMM_Lock
table you can clear them by executing the prc_VMM_ReleaseAllLocks
stored procedure.
Ahmad Samir | MCSE 2003, MCSE 2012 Private Cloud | MCTS: SCOM 2007, Lync 2010, Exchange 2010, Server Virtualization.

Problem starting managed server in cluster (The name of the managed server is same as admin server)

          We have the following setup.
          CLLUSTER1 and CLUSTER2 are the servers to be in the cluster. CLUSTER3 is the cluster
          administrator. We start CLUSTER3 as a self-managed server and then try and start
          CLUSTER1 and CLUSTER3 as a managed server pointing at CLUSTER3. When we start
          1 and 2 we get the following:
          D:\bea\wlserver6.1\config\CLUSTER1>startmanagedweblogic CLUSTER3 http://10.0.1.1
          03:7001
          D:\bea\wlserver6.1>set PATH=.\bin;C:\WINNT\System32;d:\jdk1.3.1\bin
          D:\bea\wlserver6.1>set CLASSPATH=.;.\lib\weblogic_sp.jar;.\lib\weblogic.jar
          D:\bea\wlserver6.1>echo off
          * To start WebLogic Server, use the password *
          * assigned to the system user. The system *
          * username and password must also be used to *
          * access the WebLogic Server console from a web *
          * browser. *
          D:\bea\wlserver6.1>"d:\bea\jdk131\bin\java" -hotspot -ms64m -mx64m -classpath
          ;.\lib\weblogic_sp.jar;.\lib\weblogic.jar" -Dweblogic.Domain=CLUSTER1 -Dbea.home
          ="d:\bea" -Dweblogic.management.password= -Dweblogic.ProductionModeEnabled=true
          -Dweblogic.Name="CLUSTER3" -Dweblogic.management.server="http://10.0.1.103:7001"
          "-Djava.security.policy==d:\bea\wlserver6.1/lib/weblogic.policy" weblogic.Serve
          r
          <20/11/2001 12:05:10> <Info> <Security> <Getting boot password from user.>
          Enter password to boot WebLogic server:
          Starting WebLogic Server ....
          Connecting to http://10.0.1.103:7001...
          The WebLogic Server did not start up properly.
          Exception raised: weblogic.management.configuration.ConfigurationException: The
          name of the managed server is same as admin server. The managed server will not
          be allowed to start up.
          weblogic.management.configuration.ConfigurationException: The name of the manage
          d server is same as admin server. The managed server will not be allowed to star
          t up.
          at weblogic.management.Admin.getBootstrapLocalServer(Admin.java:998)
          at weblogic.management.Admin.initialize(Admin.java:320)
          at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:359)
          at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
          at weblogic.Server.main(Server.java:35)
          Reason: Fatal initialization exception
          D:\bea\wlserver6.1>goto finish
          D:\bea\wlserver6.1>cd config\CLUSTER1
          D:\bea\wlserver6.1\config\CLUSTER1>ENDLOCAL
          D:\bea\wlserver6.1\config\CLUSTER1>
          Many thanks in advance,
          Alex Burton
          http://www.e-plus.com.au/


Don't start the admin server as managed. Removing
          -Dweblogic.management.server...
          from the command line should help.
          Alex Burton wrote:
          > We have the following setup.
          > CLLUSTER1 and CLUSTER2 are the servers to be in the cluster. CLUSTER3 is the cluster
          > administrator. We start CLUSTER3 as a self-managed server and then try and start
          > CLUSTER1 and CLUSTER3 as a managed server pointing at CLUSTER3. When we start
          > 1 and 2 we get the following:
          >
          > D:\bea\wlserver6.1\config\CLUSTER1>startmanagedweblogic CLUSTER3 http://10.0.1.1
          > 03:7001
          >
          > D:\bea\wlserver6.1>set PATH=.\bin;C:\WINNT\System32;d:\jdk1.3.1\bin
          >
          > D:\bea\wlserver6.1>set CLASSPATH=.;.\lib\weblogic_sp.jar;.\lib\weblogic.jar
          >
          > D:\bea\wlserver6.1>echo off
          >
          > ***************************************************
          > * To start WebLogic Server, use the password *
          > * assigned to the system user. The system *
          > * username and password must also be used to *
          > * access the WebLogic Server console from a web *
          > * browser. *
          > ***************************************************
          >
          > D:\bea\wlserver6.1>"d:\bea\jdk131\bin\java" -hotspot -ms64m -mx64m -classpath
          > ".
          > ;.\lib\weblogic_sp.jar;.\lib\weblogic.jar" -Dweblogic.Domain=CLUSTER1 -Dbea.home
          > ="d:\bea" -Dweblogic.management.password= -Dweblogic.ProductionModeEnabled=true
          > -Dweblogic.Name="CLUSTER3" -Dweblogic.management.server="http://10.0.1.103:7001"
          > "-Djava.security.policy==d:\bea\wlserver6.1/lib/weblogic.policy" weblogic.Serve
          > r
          > <20/11/2001 12:05:10> <Info> <Security> <Getting boot password from user.>
          > Enter password to boot WebLogic server:
          > Starting WebLogic Server ....
          > Connecting to http://10.0.1.103:7001...
          > ***************************************************************************
          > The WebLogic Server did not start up properly.
          > Exception raised: weblogic.management.configuration.ConfigurationException: The
          > name of the managed server is same as admin server. The managed server will not
          > be allowed to start up.
          > weblogic.management.configuration.ConfigurationException: The name of the manage
          > d server is same as admin server. The managed server will not be allowed to star
          > t up.
          > at weblogic.management.Admin.getBootstrapLocalServer(Admin.java:998)
          > at weblogic.management.Admin.initialize(Admin.java:320)
          > at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:359)
          > at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
          > at weblogic.Server.main(Server.java:35)
          > Reason: Fatal initialization exception
          > ***************************************************************************
          >
          > D:\bea\wlserver6.1>goto finish
          >
          > D:\bea\wlserver6.1>cd config\CLUSTER1
          >
          > D:\bea\wlserver6.1\config\CLUSTER1>ENDLOCAL
          >
          > D:\bea\wlserver6.1\config\CLUSTER1>
          >
          > Many thanks in advance,
          > Alex Burton
          > http://www.e-plus.com.au/

Changes required after adding the sap server in domain (Visual Admin )

Similar Messages

Maybe you are looking for