Changes to a Role are not Reflected

I have created a role with one BSP iView and assigned the role to a user. When the user logs in he can see that iView. Then I have added three more BSP iViews to the role. But these new BSP iViews are not visible to the user. The user had logged off and logged on again. I have deleted the role assignment to the user and then reassigned. Nothing is working. Can someone tell me what could be the problem? I will assign points to helpful posts.

probablly you may not clear the cache, just clear the cache and check it out.
to clear cache go to system administration -> navigation -> navigation cache.

Similar Messages

Changes in Crystal reports are not reflecting after publishing

Dear SDN Mates,
We are facing problem with Crystal reports. After making the changes in the crystal reports, it is not reflecting in the portal after publishing. Still it is showing the older version of the report.
Can anyone please help me on this.
Thanks and Regards
Arun S

Hello Prathamesh,
After publishing the report, we require some changes in the report and doing some modifications in crystal report and again we are publishing this report. After publishing the report for second time, those changes are not reflecting in the BOE portal.
This is happening for all reports. Can you please suggest me on this.
Thanks and regards
Arun S

Changes made in BOM are not reflected in Configurator.

Hi all,
When i update minimum and maximum quantities in BOM, the new values are not reflected in the configurator.
I have found a patch (patch# 4410573) for this issue in metalink and applying that patch did not resolve the issue.
I have logged an SR with Oracle for this and Oracle support have asked me to run "Refresh Single Configuration Model" concurrent program and see if the changes are reflected.
This program has 2 parameters one for folder and the other for Configuration Model Id.
When i try to run the program, for any of the folders, the value set for the parameter Configuration Model Id does not show any values and hence i am unable to run the program.
We don't have a separate instance for COnfigurator.
Do i need to do any set up so that my Configuration model is reflected in the LOV?
Can anyone please help me on this?
Oracle Apps version: 11.5.10.2
Configuration software build: 11.5.10.25.43A
Regards,
Sreekanth

Hi Jason,
Please see my comments below
Jason said*
Support is correct. If you haven't run the Refresh a Single Configuration Model concurrent program for your model, then the new BOM attributes will not be visible in your model. Changes to items/BOMs are not directly reflected in the configuration model. You must "refresh" the model to see the changes.*
Even without running the "Refresh a Single Configuration Model" concurrent program, in some scenarios, changes are being reflected in Configurator.
Ex:
When i change only minimum and maximum quantities, the changes i.e. new minimum and maximum values are not reflected in Configurator.
But, when i also change any of the following fields along with minimum and maximum quantities, new values are being updated in Configurator with out running the refresh program.
effectivity_date, disable_date, component_quantity, planning_factor, component_yield_factor and optional class
Can you please explain this?
Also, i have already tried executing the query by commenting the enclosing_folder check. But still, the query is not retrieving any records.
Basically, the sub-query that fetches devl_project_id itself is not retrieving any records.
Jason said:+
Based on the SQL above, the only criteria for importing a model is that the item under the folder must be:+
a. A Model (PRJ = Project)+
b. The Model cannot be deleted (Deleted_flag must be '0')+
c. And the model must have been imported from Oracle apps, e.g. it cannot be a non-BOM model (orig_sys_ref is not null)+
Can you please tell how can i check whether model is imported into configurator or not and if it is imported from where is it imported?
Regards,
Sreekanth
Edited by: Sreekanth Munagala on May 12, 2011 8:52 AM

Changes made in jsp are not reflected

webpages are not reflected after modifying jsp pages
what i need to do??
thanks in advance

Hi
Thanks for your reply,
I am using CQ 5.5 and was installed service pack 2.
1. We make package from SVN or through maven build to the CQ dev server.
2. JSP changes perfect but /var/classes java files contains old code(i.e new JSP file complitation is not happening )
3. Only when we restart server, /var/classes reflecting with new code other /var/classes have old code only.
What is best procedure to re-compile JSP with out Restart server.

Changes made to files are not reflecting

File updates not reflected. I modified content, added data validation and saved the file back - next day file is still the way it was before modification.
Other file, another site but similar situation.
Content changed - form added but next day the change is not reflected.
SharePoint 2013
Please help.
Thanks
Pj

HI Alex,
Answers to your questions inline below:
So you are editing a file, modifying the content in there and saving it but the changes are being lost?
Ans: Yes.
1. Have you checked the file immediately after closing it to see if the changes lasted?
Ans: I am not sure, if I checked the files immediately after. I think the changes were saved properly because I didn't get any error.
I managed to print out a file with a new element on one day but on the next day in the same file, I saw that element was not there.
I sometimes open the files through the Newsfeed tab, does that matter? My understanding is that the system is going to the original location to open the file
2. Do the changes then disappear later that day at some point?
Ans: That is my understanding.
3. Does this happen just for those files?
Ans: So far I have observed it for two of the files only.
4. Do you have versioning or publishing enabled on those lists? Versioning will let you see who changed it when and approval or publishing might be hiding things?
Ans: Versioning is enabled, publishing - not.
When I go to check versions to see, if maybe someone overwritten my change and retrieve the previous version, there is no previous version with the changes i made
the previous day.
Thanks.

Changes made in EMS are not reflected in EMC

Hello all,
I realise that this is 2013 discussion, but I could not find a 2010 section.
My problem is simple: any change that I make inside the Exchange Shell is simply not reflected in the Console. It doesn't appear there. It can't be searched for. Nothing.
I'd like to know how to fix this. Exchange is very broken when it is operating like this, and I pretty much cannot do anything. Customer GALs are exposed to each other, etc.... because changes won't occur even though the shell says they have.

Hi
What changes are you making? Some changes do take time as replication etc. happens in the backend. Have you tried restarting the server? do you see any changes after that?
Please also check the Application log for errors.

Changes to the infoobject are not reflecting in the query Desinger level.

Hi All,
We removed some Attributes to one characteristic and transported into QA.
The removed attributes are not getting in BEx query designer in Dev, But we are getting those removed attributes in the context menu of that particular Char in BEx Designer in QA.
We checked in the Characteristic level, those removed Attributes are not there in Info object level but still those Attributes are displaying in BEx designer level in QA.
And info object showing as gray color even though we activated the info object, We think this may be the cause to not reflect the changes to BEx Designer level.
Can any one suggest us to resolve the issue.
Thanks & Regards,
Raju. E

Hi Raju
Go to transation RSRT enter one of the reports and click to Generate Report. If this solves your problem then you can go to Environment\generate queries directly to regenerate the impacted queries.
Cheers
Tansu

Changes made from application are not reflecting in Database and vice versa

I am updating changes from my Application. However the data in not reflected in the DB. I logged in and can see no change. However, the changes are being reflected in the Application, even after a server restart. Any ideas on this ?? its wierd !!

SELECT   c.sql_text sqltext
    FROM v$session a, v$sqltext c
   WHERE a.SID = :session_id AND a.sql_address = c.address(+)
ORDER BY a.status, a.last_call_et, A.SID, A.username, C.pieceSQL_ADDRESS
SQL_HASH_VALUE
SQL_ID
SQL_CHILD_NUMBER
Check this to see the last executed sql in your database , make sure you connect to right database with right schema
Last executed sql

Smartforms : CHanges in one language are not reflecting in other languages.

Hi
I did some changes to the smartforms in language en and was trying to see the effect in other client in language de. But dont see any changes in other language.
Changes that i did were, Changing the text in the forms, addition of new fields, set some conditions to text.
Hope the problem is clear.
Please help.

After doing changes in the German Form in transaction SE63, the changes do not reflect in English language after activating the german form.Please help me with your valuable suggestion to solve this problem.
Regards
Ankur Godre

Changes in Logonlables.properties are not reflecting in Logon screen in EP

Hi frndz..
Am chnaging the logon screen branding image and text and also the WELCOME text n the copy rights text also.
For this am following a like in that itz saying to take the PAR file "com.sap.portal.runtime.logon.apr"
from the following localtion.
<J2EE_Engine_Instance>\j2ee\cluster\server<X>\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\deployment\pcd.
but i didn't find any par like above the above specified location, but i found tha same par in the path of
<J2EE_Engine_Instance>\j2ee\cluster\server<X>\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\deployment\temp.
so i taken tha PAR from ther n made the chnages in same PAR only i did't renamed PAR in same par only i made the chnages but itz not reflecting after server restart also
Thanks in Advance
Regards
Rajesh

Hi,
Why don't you try from portal end? downloading and uploading the par file from portal.
Check this blog https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60caa539-8e51-2a10-0e83-e0a68ab3f5aa
PradeeP

Changes in JSP page are not reflected

Hello all!
I created in JDeveloper 10.1.2.1 a simple JSP page. Then I ran the page using embedded oc4j - browser showed the page. That's OK. But when I update JSP code and run the page again I don't see any changes applied in browser!
It seems that page is downloaded from some cache. I can't understand from what one.
I'm sure it's not a browser - I cleared browser cache and inserted HTTP headers "Expires", "Pragma", "Cache-Control" in response but it didn't help. Besides I tested the same page with standalone oc4j - every time I change the page and refresh it in the browser I see new content.
Thank you in advance

I am facing the same problem with JSP!
File is included from another file, but tried to touch all the files from web content, even removed the files from .jsps. OC4J recreates the xxx.java and xxx.class file (with good content), but to the browser is sent only the old content...
I am using OC4j version 10.1.3.40.66 embedded in jdeveloper 10.1.3.2.0
Any help would be appreciated since the project is huge and takes 1 minute to start a deployment and is anoying to do that only to edit one jsp.
Thank you.

Changes are not reflecting in the Quality

Hi,
These are standard SAP Components. I have imported the ESS and MSS Packages.
Actually 3 Development Components are using in my application (Tra,TraTri and TraTre).Tra is the root DC.
I have made changes to those objects and sucecessfully build without errors.
After check-in all activities those activities are working fine in Development system.
But those changes not refclecting in Quality system. So i was founded build log error in Consolidation.
I was fixed the error in the Development system and build the components without build error.
still now changes are not reflecting in the quality system.
But out of 3 DCs(Tra,TraTri,TraTre) Tra and TraTre are working fine in Quality(changes are reflecting) only problem in TraTri DC (changes are not reflecting in the Quality)..
Please help me as soon as possible....Its very help full for me
Regards
Sudhakar Reddy A

Hi Slava,
very very thanks to you for the fast reply. but one thing in my side.
When i release the activities after successful build, i export those changes and place them in the import queue of the consolidation system in the CMS.
The export in the SAP NetWeaver Developer Studio packs all selected activities into a change request, and then places them in the import queue of the consolidation system.
When the my system administrator imports this request into the consolidation system, the released changes are integrated into the DTR workspace of the consolidation system; the build server compiles the modified components.
my system administrator findout build error in consolidation system:
[wdgen] [Error]   .PersonnelNumberCheck: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   com.sap.xss.tra.tri.vc.changepersno.VcTriChangePersNo --> ContextModelNode PersonnelNumberCheck [modelClass]: The context model node has not been bound to a model class (Hint: A Context model node has to be bound to a model class or mapped to a model node of another controller.)
     [wdgen] [Error]   .PersonnelNumberCheck.I_Employeenumber: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   com.sap.xss.tra.tri.vc.changepersno.VcTriChangePersNo --> ContextModelNode PersonnelNumberCheck_Output [modelClass]: The context model node has not been bound to a model class (Hint: A Context model node has to be bound to a model class or mapped to a model node of another controller.)
     [wdgen] [Info]    com.sap.xss.tra.tri.vc.changepersno.VcTriChangePersNo --> ContextModelNode PersonnelNumberCheck_Output [supplyingRelationRole]: Supply function or supplying relation role missing (Hint: A child node which is not mapped must have either a supplying relation role or a supply function or one of its parent nodes must have a supply function.)
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.E_Name: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   com.sap.xss.tra.tri.vc.changepersno.VcTriChangePersNo --> ContextModelNode PersonnelNumberCheck_Et_Return [modelClass]: The context model node has not been bound to a model class (Hint: A Context model node has to be bound to a model class or mapped to a model node of another controller.)
     [wdgen] [Info]    com.sap.xss.tra.tri.vc.changepersno.VcTriChangePersNo --> ContextModelNode PersonnelNumberCheck_Et_Return [supplyingRelationRole]: Supply function or supplying relation role missing (Hint: A child node which is not mapped must have either a supplying relation role or a supply function or one of its parent nodes must have a supply function.)
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Type: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Message: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Log_No: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Field: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.System: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Message_V1: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Message_V3: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Message_V2: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Log_Msg_No: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Number: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Message_V4: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Parameter: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Id: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   .PersonnelNumberCheck.PersonnelNumberCheck_Output.PersonnelNumberCheck_Et_Return.Row: The mapping definition is inconsistent, the mapped context element does not exist.
     [wdgen] [Error]   com.sap.xss.tra.tri.vc.changepersno.VcTriChangePersNo --> ContextValueAttribute EmployeeName [readOnly]: The context attribute has to be read-only. (Hint: As the mapped context attribute is read-only this attribute has to be read-only, too.)
I was fix error in my development system with out any build errors. still now not working ...pls give me any suggestion.i dont have access to consolidation system.
Regards,
Sudhakar

Changes are not reflected in Script output

Hi All,
i am facing a problem in SAPscript.
I have made a Zscript by copying standard script F110_FR_CHEQUE. I have made the changes in the script as per requirement in development client and transported it to testing client to test (As i dont have any data in development client). But, surprisingly, when i run the program and check the output, the changes are not reflected in the script output.
First i thought that my script was not triggered thats whay i m not getting any change, but later i changed the dimension of one of the window, in which some hard coded text is written, the differece i found was that, window size is changed, but the text written in that window is still same (what was in standard script.) .
I am using standard texts for hard coding in script. Standard texts have been transported in testing client also.
please help me in this regard.

Hi,
Could you plese Check NACE whether your script is confiugring or not.
If it is configured well then Check Standard Text is available or not in Test client by open it in SO10.
Check all the paragrah formats applied to Standard text are transferred to Test client which are in SE72.
IF it is available in SO10 then debug the print program for that windows any standard conditions are calling to print the text.

Changes are not reflecting in the discoverer workbook

Hi ,
I have a report created with user Disco(Disco.Report_name).Now I need to add a column to it and i have done that with other user Discodev but when I save it the changes are not reflected on Disco(Disco.Report_name) rather it is being saved with user Discodev(*Discodev.Report_name*) .
The User wants that the changes should be reflected on Disco.Report_name (I can't use the credentials of Disco to do this as it is also a user) .
Appreciate your help !!
Discoverer Version 4i
Thanks ,
Vijay

Hi West,
Thanks for the reply.
I want to get clarified one thing, Is there any option where DISCO user can give Privileges to DISCODEV to make the changes,as the DISCO user is not a common user I have a problem in making the changes.
Thanks,
Vijay

Changes are not Reflecting in WAD

Dear Gurus,
I got a problem in WAD. Changes are not Reflecting in My WAD. When i created NewQuery in WAD by just placing Chart & Saved it. After executing Chart is displaced.Again I updated the same query by placing table and saved it. After Executing Table is not displayed only previously saved Chart is displayed. Could any one Kindly solve my Problem.
Thanks,
Sony

Hi Sony,
SAP BI has HTTP Cache and the web templates are stored in the HTTP cache of the server. So, when you change a template and execute it again - the previous version which is stored in the HTTP cache is being retreived.
To correct this, go to TCODE SMICM in the menu bar >> Goto >> HTTP Server Cache >> Invalidate -> Global in system
Once this is done, ask basis to restart the java engine.
I hope this helps you.!
-Pradnya
Edited by: Pradnya Rane on Sep 29, 2009 8:05 AM

Changes to a Role are not Reflected

Similar Messages

Maybe you are looking for