Changes to Factory Calendar Not reflected in work schedule

I have updated the exsisting factory calendar in PRD .
Yet the changes do not seem to have taken effect. I have tried to regernerate the work schedule. However I'am not sure I have done that properly.
Any assistance would be greatly appreciated.
Thank you

Hi.. you cant expect any change in the Factory calender affecting work schedules. If you want the work schedules to be updated with the holidays you need to be updating the holiday calender.
Factory calender is mainly for Plant Schedules, Bank transfers in finance , etc

Similar Messages

Holiday is Not reflecting in Work Schedule

Hi All,
While maintaining infotype 0007, i checked work schedule rule and got to see that one holiday is not reflecting in Work schedule.
I have assigned correct holiday calender and in holdiday calender holiday class is assigned "1" as well.
Assignment of Holiday calender with Personnel area is also correct.
What may be the reason for this issue??
I need holiday class and day type should reflect in 0007 infotype.
Regards
Priya:)

Yes.. It did.
My issue is that all hoidays are reflecting in calender excpt two days....
So that ways there may not be any issue with work schedule generation.
Regards
Priya:)

Substitutions not reflected in work schedule

Hi experts,
I have have substitued workschedule , however when i click on the personnel working schedule button and its not reflecting in the employee work schedule .
My situation are suppose an employee work schedule was to be early shift and i substitute it to afternoon shift to replace a staff.The problem is the system does not overwrites my employee working schedule.
Is there any place where i could check whether it had been substitued ?
Regards,
Chris

Hi Chris,
Please ask Piscian how query resolved:
http://forums.sdn.sap.com/click.jspa?searchID=37369186&messageID=8575232
Regards,
Dilek

Changes to subtasks are not reflected in the summary task

I use Project Professional 2013.
Changes to subtasks are not reflected in the summary tasks. This includes both work and actual work as well as % complete. The tasks are all auto scheduled. Is there a setting that I need to change?

The only way I know to make that happen is if calculate project after every edit is disabled (See Options, Schedule tab).
Does this happen in all project files, for other PCs near you and do you have SP1 installed for Project 2013?
Rod Gill
Author of the one and only Project VBA Book
www.project-systems.co.nz

Impact of Changing the Factory Calendar

Hi,
I want to know how factory calendar settings impact various things in production planning,sales and distribution,FICO and other modules.
If buisness needs to change the factory calendar at the middle of the year due to some reasons,how it will impact and what are all the necessary care to be taken to overcome that impact.
If anybody having the document regarding the factory calendar,please share the link.
Please guide me regarding this
with regards
Girish

Hi Girish,
If you take from PP point of view we assigned factory calender to work center if we changed it, the it will effect on scheduling of order, capacity planning. I dont think u will find any problem , if u change it then you need to run MRP again.
You have to assign factory calendar to PLANT
Go to SPRO>ENTERPRISE STRUCTURE->DEFINITION> LOG GENERAL>DEFINE COPY,DELETE AND CHECK PLANT>DEFINE PLANT
Regards,
R.Brahmankar

Error: Factory Calendar Not In Buffer

Hi all.
I am rtrying transaction CO15 to confirm order, but it giving error RU017: Factory calendar not in buffer. Contact system administrator.
I have checked all assignment, it is correct. factory calendar correctly assigned to plant. Can anyone help me...
Thanks.

Hi Puru,
Check the release date of the production order and the date on which you are trying to confirm, see that there is a valid factory calender available for that day (Plant assignment or the factory calender assigned to the Workcenter of the operation you are trying to confirm)
Hope this helps...Reward your points if so,
Regards,
Prasobh

The change in model is not reflected to view

Hi,
I am using JDeveloper 10.1.3.3 with ADF Faces and ADFBC. I have Order and Orderline tables, related EO's and related VO and Viewlinks. When I test the model with AppModule Tester everthing works as expected. On the view part there is an ADF Form for Order VO and ADF Table for Orderline VO. In orderline there is a quantity field(af:inputText with autosubmit = true;) when it's changed the linetotal field is updated and ordertotal field is updated too. This logic is implemented in entity objects implementation. On the jsf page the change to linetotal field is reflected to view but the change to ordertotal field is not. linetotal and ordertotal fields both has Partial Triggers on quantity field.
On remove of orderline record I also update the ordertotal field and in this case the change is reflected to view. This should be a very simple issue. Any help is appreciated.
Best Regards,
Salim

Maybe you should run the code in an eventhandler for the event 'changed' of purchase order ?

Changes to custom VO not reflecting

Hello All,
I created a new VO which extends standard. I did a jpximport. First time it worked. But now when I make changes to the VO files, the changes, query and new attributes, are not reflecting on the OA page. The page is picking the old version. Saw the details through About Page. Apache was bounced a couple of times still no use.
Can anybody tell me if I'm missing out anything here ?
Thanks.

You can also use functional administrator responsibility.
--Shiv

Changes to password are not reflected immediately in the application

Hi All,
If I change the password either from the console or through the application
itself, the change are not reflected immediately. They are reflected when I
shutdown both the admin server and managed server and bring them up. I think
the previous password is cached somewhere. If so, how to refresh it. When I
am changing the programatically ie using
User.changeCredential(oldPassword,newPassword);
I am refreshing the realm by using RealmMBean.refresh() . But it is not
working. Right now i am using default file realm. Can anyone tell what i
am missing here
Thanks in advance
Suresh

Suresh,
If your custom user extends DefaultUserImpl then you can update the password
in that instance within the method User.changeCredential(...) as
Construct the userinfo object with the old password
Authenticate the user against the realm with the userinfo -- returns the
customuser
customuser.setCredential( ** new passsword**) (setCredential method of
DefaultUserImpl)
update the file/database
Hope this works.
-- Sunny
"Suresh Done" <[email protected]> wrote in message
news:3b4a4d7e$[email protected]..
Hi All,
If I change the password either from the console or through theapplication
itself, the change are not reflected immediately. They are reflected whenI
shutdown both the admin server and managed server and bring them up. Ithink
the previous password is cached somewhere. If so, how to refresh it. WhenI
am changing the programatically ie using
User.changeCredential(oldPassword,newPassword);
I am refreshing the realm by using RealmMBean.refresh() . But it is not
working. Right now i am using default file realm. Can anyone tell what i
am missing here
Thanks in advance
Suresh

QM03-Custom tab-Change to text field not reflecting-FG - XQQM-screen-0106

Hi,
I have a requirement to change the text field on a custom tab of QM03 transaction. Quality notification type is Z1 and the tab is "Checklist". Both are custom defined.
The existing text field is of 3 lines. The new text message is of 8 lines. When I did the changes on the custom screen 0106 in the function group XQQM, the changes are not reflected on the QM03 transaction's custom tab. Only first 3 lines were reflecting the change and rest of the 5 lines are not appearing on the screen.
Pointers on this will be definitely helpful.
Regards,
Mallika.

I had a similar problem, but it was with the message line. I found that with Web Forms, I had to issue the Synchronize; a second time, but in Client/Server Forms 6i, the first synchronize worked. Here is the code I used:
<pre><font face = "Lucida Console, Courier New, Courier, Fixed" size = "1" color = "navy"> SYNCHRONIZE;
if Get_Application_Property(User_Interface) = 'WEB' then
synchronize;--first does not work on web
end if;</font></pre>
Let us know if this works.

Changes to HTML template not reflected in production

Hi All,
I am facing the following issue.
I have changed an already existing screen(HTML template) and published the service. It is working fine in development environment. This is now transported to production environment and the screen change is not reflected here. We have tried refresing the ITS buffer, but hasnt worked. Any pointers would be of great help.
Thanks,
Shruti

Hi Shruti,
did you check the changed template in the productive environment? Did the transport successfully reached the new system?
If the changed template is available please (re)publish the file on the new environment.
Regards,
Sabine

Creation or change in WEB UI not reflecting in BP transaction

Hi,
I have a requirement in which whatever entry is there in Country field should be defaulted to Authorization Group field . When I am creating a new corporate account by filling all the mandatory fields in the UI and pressing enter and save, the authorization group field is getting defaulted in WEB UI and the change is reflecting in BP transaction under the Control Tab. But when I am creating a new corporate account by filling all the mandatory fields in the UI without pressing enter and pressing only the save button, the authorization group field is getting defaulted in WEB UI and the change is not reflecting in BP transaction under the Control Tab. help me out guys.
Thanks and Regards,
Surya.

Hi Surya.
Not sure what version of CRM you are working on but transaction BP is not supported from CRM 2007 (I Think, else CRM 7.0), so what you're experiencing maybe linked to this.
Regards
Arden

Metadata changes in Lightroom are not reflected in Premiere Pro C

Hello everyone. I am having trouble with my current workflow. I am shooting RAW with a Canon 7d using Magic Lantern. I use raw2cdng to transform the mlv(raw) files to cdng. I then use lightroom to color correct my DNG files. I use lightroom to save the new metadata info to my files. Those changes that I make are reflected in file explorer, but when I import the files to Premiere Pro using the MediaBrowser the color corrections that I made in lightroom are not being shown. What am I doing wrong? Why is Premiere Pro not reading my metadata info correctly? I appreciate all of your help.

Changes made in ECC not reflected to CRM

Just encountered a problem. As follows:
1. When a line item in a sales order in ECC is rejected with a reason, the changes are reflected back to CRM. Likewise, when the PO number field in the sales order is changed, the changes are reflected back to CRM. This is ok.
2. But when I make a change in the address fields (i.e. change the street) in the ship-to partner (on the header level) in the sales order in ECC, the changes are not reflected back to CRM.
Has anyone encountered this issue before and if so, what was the solution?
Will reward points...

Hello,
Check the inbound queue in CRM and outbound in R/3.
Prase

Changes in Active Directory not reflected in SharePoint user info

I have change the manager & name in Active directory but it's not reflecting in sharepoint. I found one command
stsadm -o migrateuser
   -oldlogin <domain\name>
   -newlogin <domain\name>
   [-ignoresidhistory]
But i don't want to do one by one i have many users is there any command for migrate all updated user information

The migrateuser command is really only when a user's ID changes. Making changes such as name and manager should still be reflected under the original ID. If the changes doesn't propagate, ensure that your User Profile Service Sync completed successfully.
Check for errors and address any you find. A successful sync will propagate the changes properly.
Start here:
http://technet.microsoft.com/en-us/library/ff382639(v=office.15).aspx
I trust that answers your question...
Thanks
C
|
RSS |
http://crayveon.com/blog |
SharePoint Scripts | Twitter |
Google+ | LinkedIn |
Facebook | Quix Utilities for SharePoint

Changes to Factory Calendar Not reflected in work schedule

Similar Messages

Maybe you are looking for