Changes to fields in workflow not published

Hi,
When I set a project field in a workflow, the new value is not visible until someone modifies the project in PWA.
Is there a way to have the workflow publish the modification ? I have not found any publish, commit, or other action that could do this.
I have a suipport call at Microsoft about this. But, I was wondering if someone had a work around.
Thanks

Hi Jean,
How did you created your workflow? SharePoint Designer? See some similar thrad below:
https://social.technet.microsoft.com/Forums/projectserver/en-US/88f4f838-b6ae-4d85-8818-c94a4b989955/publish-project-programmatically?forum=project2010custprog
https://social.technet.microsoft.com/Forums/projectserver/en-US/74852f0b-1f3a-494c-ac94-c8ca4e5ce746/publish-a-project-automatically-in-a-workflow?forum=projectserver2010general
https://social.technet.microsoft.com/Forums/projectserver/en-US/d9535287-2375-4015-ad82-35ff610bc70e/project-server-2013-demand-workflow-sharepoint-designer-publish-project?forum=project2010custprog
https://social.technet.microsoft.com/Forums/projectserver/en-US/ecb47c07-ea51-4b86-984b-6e96a1cea819/workflow-update-project-property-not-updating?forum=project2010custprog
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

Similar Messages

SAP workflow not published / not reaching default outbound handler

Hi,
At Velocity event (october) we had a SAP ERP workflow configured for publishing to SharePoint; after triggering workflow instances, an XML payload document was successfully published to SharePoint.
Now, in the same environment; without changes on Duet Enterprise config level, publishing of task changes of that same workflow no longer publishes into SharePoint.
We executed the report jobs OSP_DELTA and OSP_FULL to make sure that the sync from SAP to SharePoint would be done / task changes are notified. The SAP workflows are delivered into the SAP inbox; but not published to SharePoint.
We added a breakpoint (internal + external) in the default outbound handler S_OSP_WF_PAT_DEFAULT_CH_OB; it is not invoked when we reach the workflow decision step that is published.
We inspected the SCL Logs, but didn't find any relevant log entries.
Any clue what can be wrong here; where to start with the problem analysis?
Best regards, William.

Hi Holger,
The error 'Users not maintained...' appears to be caused due lack of SAP permissions of the SAP account that is executing the report S_OSP_WF_ITEM_SELECTION; with another account we succesfully pass the 'GetNotifications' calls within that report; and actually now do get into the default outbound handler.
But still no task document published into SharePoint; the default outboundhandler faults on Send Action item; error details:
ERROR_CONTEXT>
<ERROR_INFO>ICF Error when sending the request: HTTPIO_ERROR_SEND_STATE-Fehlermeldung beim Senden der Daten.</ERROR_INFO>
- <CONSUMER_INFO>
<CONSUMER_PROXY>CO_OSPWACTION_ITEM_VI_DOCUMENT</CONSUMER_PROXY>
<LOGICAL_PORT>CO_OSPWACTION_ITEM_VI_DOCUMENT</LOGICAL_PORT>
<OPERATION_NAME>maintainActionItem</OPERATION_NAME>
<OPERATION_NAMESPACE>urn:ActionItemWsd/ActionItemVi/document</OPERATION_NAMESPACE>
<PROCESSING_UNIT>Sector 1: WS-Consumer</PROCESSING_UNIT>
<PROCESSING_MODE>Synchronous</PROCESSING_MODE>
<COMMUNICATION_TYPE>Remote</COMMUNICATION_TYPE>
<WORK_PROCESS_NUMBER>1</WORK_PROCESS_NUMBER>
<WORK_PROCESS_PID>25034814</WORK_PROCESS_PID>
<TERMINAL_NAME>C0269450</TERMINAL_NAME>
</CONSUMER_INFO>
- <TRANSPORT_INFO>
<PROTOCOL>HTTP/1.1</PROTOCOL>
<AUTHENTICATION_METHOD>BasicAuth</AUTHENTICATION_METHOD>
</TRANSPORT_INFO>
</ERROR_CONTEXT>
We want to check the settings of Consumer Proxy for Workflow (page 76 in deployment guide); however we don't see 'Connection Settings' entry in the SCL server.
--> 4. Select Connection Settings > SCL to Consumer > Configure Service Endpoint.
Regards, William.

Userexit in VA41. Changes to field aufnr are not saved

Hello,
I have to fill the field xvbap-aufnr with the field vbeln during saving a order (contract) in VA41.
I tried to use "userexit_save_document" and "userexit_save_document_prepare".
The problem is that in userexit "userexit_save_document_prepare" the field vbeln is not field because we use an internal num range.
In userexit "userexit_save_document" the vbeln is filled but I am not able to change the entry of xvbap-aufnr. I can change the field value but my changes are not written to the data base. Why ????
Thanks

If the number range for VBELN is internal, you cannot change it through user exit. Changes made to structure fields in USEREXIT_SAVE_DOCUMENT will not have any effect.

IWeb 09 will not publish

I just upgraded from iWeb 1.1.2 to iWeb 09. I then made a number of changes to my website. I have attempted to publish the site dozens of times since I made the changes. The site will not publish. The publishing process seems to be correct. I get the "site has been published message, but when I visit the site the changes are not there.
Has anyone out there had this problem?
Thanks,
Jack

Versions of iWeb previous to '08 use a domain.sites file and published to Finder/Go/iDisk/My iDisk/Web/Sites/iWeb.
iWeb '08 converted the file format to domain.sites2 which was not successful for a lot of us. I ended up rebuilding all my sites. This version also dropped the iWeb folder on your iDisk and publishes to Finder/Go/iDisk/My iDisk/Web/Sites as does iWeb '09.
Also .Mac was changed to MobileMe for some reason.
You will note these differences in the two URLs.
I have never tried to convert a site made in '06 to '09 without going through '08.
As I pointed out, the conversion is not perfect and you should deleted and redo the sections that don't publish correctly.
If I was in your situation, I would start afresh on a new, blank domain file and copy the content that you want to keep over from the published version of your old site to the new domain file..

Issue in Workflow- Field Update is not happening

Hi Friends,
I am facing an issue to update a check box field Released.
I have created a task having Advance with Dialog opiton,Background processing to update the Checkbox field.
The BOR Object type used is BUS1006 and method is CHANGE. Everything looks fine when tested the task as well as the workflow in test mode and it is working fine in both the cases. But some how, this field update is not happening over the CRM 2007 Web UI. We are assuming it is due to user authorizations or some other settings ( like assignment of backend user to the workflow)
for doing this task. Can some one give us some pointers on this. This will be of great help.
Thanks,
Udaya

Hi Imtiaz,
I am new to this. Can you please give me some pointers on how to check whether WF-BATCH has the needed authorisations and the process can be executed in background.
Reply me at your convenient time.
Thanks a lot for your response.
Regards,
Udaya

Workflow not triggered when i have changed the PO

Hi,
We have custom fields (Price) in PO Header as well as in item. when we update in header the price should get distributed to items.
we have custom workflow evernt (changed) to update the items if user change in header. But the issue is if user changes the items and save the po, it is not updating immediatly. after we come back to Purcahse Order and save the purcahse order again then it updates the table.
Is there any reason why the event is not triggered when the PO was changed initially.

Hello,
"We have custom fields (Price) in PO Header as well as in item. when we update in header the price should get distributed to items. "
If you update a price in the header, how/why would that be distributed to the items? Is this a total price of the whole PO? Why not just have it in the header?
"we have custom workflow evernt (changed) to update the items if user change in header."
OK. Strange, but OK.
"But the issue is if user changes the items and save the po, it is not updating immediatly"
I thought it was supposed to happen when the users changed the header, not the items.
If you really have a workflow to update the items when the header is changed, then maybe it's not succeeding if the PO items are locked, eg by having them on your screen. Did the worklow actually start? Any error messages?
rgards
Rick Bakker
hanabi technology

I set iCloud up last week and the next day when out in the field I could not get Outlook to open up. I want to change my settings so I can get mail at home or in the field

I set iCloud up last week and the next day when out in the field I could not get Outlook to open up. I want to change my settings so I can get mail at home or in the field, not just when i'm at home. I have a PC and fios internet with Verizon at home. I have a Sprint air card in the field or access an available wifi. I want to change my settings to allow for receiving email in the field. What's the point of an air card and icloud for backup fi it doesn't work in the field for some odd reason?

Apple - Support - Mail Setup Assistant

Field VBUND does not allow changes to the document ?

If you post the trading partner, the trading partner(Field VBUND)does not allow changes to the document.
I can't change trading partner.
Thanks!!
Message was edited by: Rico Wang

Rico,
Using trn code SM30, modify table V_TBAER and insert the entry
BSEG-VBUND for account type S, D, K, A
and see the effect.
Thanks
Mohit
ps: you may want to check OSS notes as well.

In iweb changes not publishing

Since changing from mobileme server to ftp server, changes to website made in iweb do not publish?

If you are uploading your website files using the iWeb FTP, any old, existing files should get overwritten automatically. Try switching to another browser like Google Chrome or Firefox to view your site.
To find the file manager you need to login to your hosting account.
You can use the freeware Cyberduck to upload files and manage files on the server but it doesn't allow you to view the files on your Mac in the same window as the ones on the server...
http://www.iwebformusicians.com/Search-Engine-Optimization/Upload.html

TS2167 I am running OS X 10.8.2 and IWeb 3.0.4 (601) and everytime I try to publish my website I get an unexpected error and it does not publish my changes. My website is pretty simple, mostly made up of iPhoto albums in different categories.

I am running OS X 10.8.2 and IWeb 3.0.4 (601) and everytime I try to publish my website I get an unexpected error and it does not publish my changes. My website is pretty simple, mostly made up of iPhoto albums in different categories.

Where are you publishing to? Can you publish successfully to a folder on your hard drive? Have you read this webpage: Publish iWeb site using FTP. It may have a clue to where the problem is.
A quick troubleshooting fix is
Try the following:
1 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iWeb's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iWeb folder (Snow Leopard and Earlier).
3 - launch iWeb and try again.
NOTE: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
However, when you delete the preference file you probably will have to use the app described below to select and open your domain file with iWeb:
In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
To open your domain file in Lion or Mountain Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain.
Just launch the application, find and select the domain file in your Home/Library/Application Support/iWeb folder that you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT

"publish site changes" writes to a subdirectory, not correct directory

Heres a poser.
I enjoy iWeb because I can update my pages, and then iweb updates just those changes to my host. Been doing this for years. As my web site is fairly large, I have a main web site, and have created sites under that, which reside on the same root, that links in the main web site connect to.
Well, I just made some basic changes to three pages of one of my sub-sites, and when I updated changes, iWeb wrote the folder not to the root like the original, but inside the directory of the top web site.
So original files were never changed. I had to remove old folder from root, move the new folder to the root directory for the new files to appear. Very strange, since iWeb wrote the original folder and files in the root, but wrote the changed folder and files to a different place.
In the iWeb FTP Server settings, the directory path indicated does show the top or main site on the root level as the directory/path. If I remove it from the settings (leave directory/path blank), the whole site goes red, implying the whole thing needs to be updated. And if i start that, it states there is a folder already there with the original name, do i want to replace it.
What is mysterious to me is that iWeb wrote these sites for me, has updated these sites for me no problem, till now, when it writes changes to a subfolder instead of original folder in root.
Has anyone run into this? I am baffled, and have not made any changes to iWeb, my site, my settings which would explain this to the best of my knowledge.
using iweb 3.0.4, in OSX 10.6.8
thanks so much.

If anyone figures out why iWeb of its own accord started writing subsite folders to the home site folder instead of the root, let me know!
When iWeb publishes a website it publishes a site folder and an external index.html file. If you leave the site folder and index file in place on the server it will publish the new or changed files to that folder. That's how iWeb works.
If you want to avoid having the domain name twice in the URL change the site name to something other than the domain name. Then your URL will be www.domain-name.com/site_name/page_name.html.
When you publish just the contents of the website folder to the server you will get rid of the duplicate domain name BUT you lose the ability to use iWeb 3 to publish directly to the server. You will have to publish the site to a folder on your hard drive and use a 3rd party FTP client like Yummy, Transmit or Cyberduck to upload the contents of the webfolder to ther server. Wyodor's link explains it in more detail.
Or you could just leave the double domain name in the URL and not worry about it and rely on the content and appearance of your site to keep bringing the visitors back.
OT

Using 10.6 iweb 3.04 . I make a small change on a page , then choose publish changes , but seems to take hours and seems to want to publish the whole site , not just a small change?

Using 10.6 iweb 3.04 . I make a small change on a page , then choose publish changes , but seems to take hours and seems to want to publish the whole site , not just a small change?

Doing the following wouldn't hurt either:
delete the iWeb preference files, com.apple.iWeb.plist and com.apple.iWeb.plist.lockfile, that resides in your Home() /Library/Preferences folder.
go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
Click to view full size
launch iWeb and try again.

Iweb not publishing changed content

In iweb the "Visit site" button is not enabled and each time I try publishing all my content to www.preppypug.com changes made in iweb are not being published - any suggesstions?

hello i have had the same problem and it was very simple to solve it. Just don't click "Visit Site" button and click "OK" button instead. Then go to your sever and open it, it'd probably already changed your changes. that worked for me. Hope it helps.

PO price field in PR not allow to change

Hi,
We have facing the problem related to PO price field in PR
Network through we are creating the PR, so system showing the field PO price under the valuation tab is always u201DAs Net Priceu201D and not allowing to change for this field.
My Quire is,
1) How to make this field to default to u201CDo Not Adoptu201D instead of u201CAs Net Priceu201D
2) How to allowing to change this field.
Could you please suggest the solution?
Devendra

One query has been resolved -u201CHow to allowing to change PO price field in PRu201D of follows to steps.
1) Create a Function Authorization
SPRO - Material Management - Purchasing - Authorization Management - Define Function Authorizations for Buyers and create Function Authorizations Ex-1
2) Assign the Function Authorization of specify User ID (SU53), Parameter ID-EFB / EVO & Give Parameter value-1
http://www.kowboyz.nl/blog/copy-price-purchase-requisition-purchase-order/
Network through created the PR system showsu201DAs Net Priceu201D in PO price field. But I want u201CDo Not Adoptu201D in this filed.
Please suggest me.
Devendra

Extractor (Delta) not recognizing a change when field is set back to blank

Good Day Experts,
Any pointers on the issue below will be appreciated:
I have a Delta extractor which picks up the value from a field in ECC when the field is changed. When I initially assign date value, extractor picks up the change and everything works.
However, when I change the field in ECC back to blank, the extractor is not recognizing this as a change and hence it does not bring the new value into BI... so my master data in BI still the "old" value, even though the value has actually changed.
Please let me know if you would like me to clarify...
Cheers and Thank You,
Dmitriy

Hi....
Here you have mentioned that Delta extractor which picks up the value from a field in ECC when the field is changed...........is it a date field ? or time stamp.....
Unfortunately I can't check this datasource in my system.....
But when delta is coming based on this field..........if this field is blank then obviously delta will not get captured.........why this field in ECC is not getting updated ?
Regards,
Debjani......

Changes to fields in workflow not published

Similar Messages

Maybe you are looking for