Changes to Integration Process not reflected at runtime.

I have changed an Integration Process (eg removed a loop) and then activated this in IR and ensured that RunTime Cache is refreshed - I even forced another Run Time Cache refresh via SXI_CACHE.
however the Process is still running under the old version (I can see this from SXMB_MONI_BPE and drilling down into the workflow graphic).
How do I get XI to run the next time with the new version of my process ?

I think you will get an answer sooner when you post in the XI forum which you can find[here.|Process Integration (PI) & SOA Middleware;
Regards,
Martin
Edited by: Martin Nooteboom on Apr 18, 2008 1:20 PM

Similar Messages

Changes to Integration Process not activated

Hi.
I have a problem when developing an integration process.
When I make the changes, save and activate, the changes are not reflected when i try to call my interface.
We just went from SP9 to SP14, and the problem first occurred after!
I even tried to reboot XI but still no changes.
Anybody seen this error before?
Regards Peter

Hi Christine
You where right. The ReturnCode was set to 99.
I tried to Repeat Activation (and reimport and activate) and get one error:
"'STATUS' is not a component of data object 'PAYLOAD'"
What does that exately mean?
Regards Peter

Changes to subtasks are not reflected in the summary task

I use Project Professional 2013.
Changes to subtasks are not reflected in the summary tasks. This includes both work and actual work as well as % complete. The tasks are all auto scheduled. Is there a setting that I need to change?

The only way I know to make that happen is if calculate project after every edit is disabled (See Options, Schedule tab).
Does this happen in all project files, for other PCs near you and do you have SP1 installed for Project 2013?
Rod Gill
Author of the one and only Project VBA Book
www.project-systems.co.nz

Updating Config Changes from integration process

Hi
I've constructed a ccBPM integration process
then put together the config in the integration directory
If I then go back and make further changes to the ccBPM, the changes are not reflected in the Integration directory.
How do I update the Integration directory with changes from the integration process, without creating a new integration process in configuration after every change?
We are currently running PI 7.1
thanks
Geoff

>
Geoff Hall wrote:
> Hi
> I've constructed a ccBPM integration process
> then put together the config in the integration directory
>
> If I then go back and make further changes to the ccBPM, the changes are not reflected in the Integration directory.
>
> How do I update the Integration directory with changes from the integration process, without creating a new integration process in configuration after every change?
>
> We are currently running PI 7.1
>
> thanks
> Geoff
Have you activate the updated Bpm?
Edited by: spantaleoni on Jan 18, 2011 3:59 PM

Field lables changes in ESS iView not reflected on portal

Hi All,
I am trying to customize the SAP ESS Address DC (webdynpro Java) for South Africa region as per the SAP OSS note (No: 1428933).
In order to incorporate the changes I have imported the ess/za/addr DC into NWDS. I have changed the label text as per the OSS note and deployed the DC but changes are not reflecting in the portal
I did some more test on Label text;
1. Removed the Label text property value from DC and deployed the application, when I run the application during runtime screen is not showing any label text message for the label since I made it to empty.
1. I added my custom text message to label text value instead of standard label text value and deployed the application, when I run the application during run time screen is automaticaly showing the standard label text value not my custom label text value.
I'm trying to figure out from where these field labels value are coming from? Theoretically it should reflect field lables whats given in webdynpro but thats not the case here.
From where Label field value is coming?. Help me out in this. Thanks,
Regards, Suresh KB

If you are just changing the field label the recommended approach is to do it through Web Dynpro UI personalisation. DO NOT user NWDI to change the source code just for field label change. The way you change through UI personalisation is locate the iView in portal content, and select preview of iView then use CTRL+RIGHT click mouse button on the field that you want to change the text, you will see properties of selected field in a popup window where you can change the default text. Once you change it, and apply the changes you will be able to verify you changes in the iView properties (additional properties will be automatically created for the change you made). Now check the personal data service under ESS role you should see the change.
Hope this helps
Siva

The change in model is not reflected to view

Hi,
I am using JDeveloper 10.1.3.3 with ADF Faces and ADFBC. I have Order and Orderline tables, related EO's and related VO and Viewlinks. When I test the model with AppModule Tester everthing works as expected. On the view part there is an ADF Form for Order VO and ADF Table for Orderline VO. In orderline there is a quantity field(af:inputText with autosubmit = true;) when it's changed the linetotal field is updated and ordertotal field is updated too. This logic is implemented in entity objects implementation. On the jsf page the change to linetotal field is reflected to view but the change to ordertotal field is not. linetotal and ordertotal fields both has Partial Triggers on quantity field.
On remove of orderline record I also update the ordertotal field and in this case the change is reflected to view. This should be a very simple issue. Any help is appreciated.
Best Regards,
Salim

Maybe you should run the code in an eventhandler for the event 'changed' of purchase order ?

Integration Process not continuing after Synchronous BAPI call

I have an integration process that splits up a batch file of purchase orders into single purchase order messages. This allows me to use the "ForEach" block to call the synchronous BAPI_PO_CREATE1.
I have managed to get the process to call the BAPI and create the purchase order. The response message arrives back though the abstract synchronous interface and is mapped to the asyncronous response message. After that the process seems to hold where I am expecting it to continue on the process and be appended to a container storage list for mapping to a single return message.
I have not set up any correlation sets as I thought they wouldn't be needed for a sychronous call.
Has anyone got any advice on my approach to this process and how I might fix it.
Thanks in advance

Hi Bhavesh,
There are no errors as such in the SXMB_MONI but it gets as far as the Inbound Message (PE_ADAPTER) stage after the Sych BAPI call.
Also the SOAP Header at this stage seems to be missing "sysnchronous" or "asynchronous" in the SAP:ProcessingMode tags.
The technical workflow is as follows
FTP Batch file outbound to Integratin Process Receive (Async)
Transform message into a Multiline list of BAPI_PO_CREATE1.request (async abstract)
Enter "For Each" Block using the multiline list.
BAPI_PO_CREATE1 mapped to synchronous abstract interface
synchronous abstract interface mapped to BAPI_PO_CREATE.request and response
BAPI_PO_CREATE.response mapped to async BAPI_PO_CREATE.response
async BAPI_PO_CREATE.response appended to multiline list
Exit block
Transform multiline response list into single line response
FTP inbound
As far as I can make out I have not correctly configured the receiver of PO_CREATE1.response after it has been mapped from the sync to async so it just persists it and sits there waiting or it is waiting for somethign else to happen.
Let me know if I can clarify anything further.
Thanks
Ben

Metadata changes in Lightroom are not reflected in Premiere Pro C

Hello everyone. I am having trouble with my current workflow. I am shooting RAW with a Canon 7d using Magic Lantern. I use raw2cdng to transform the mlv(raw) files to cdng. I then use lightroom to color correct my DNG files. I use lightroom to save the new metadata info to my files. Those changes that I make are reflected in file explorer, but when I import the files to Premiere Pro using the MediaBrowser the color corrections that I made in lightroom are not being shown. What am I doing wrong? Why is Premiere Pro not reading my metadata info correctly? I appreciate all of your help.

Integration Process not fired!

Hey all,
I have a scenario of using BPM from a file sender and inbound into R/3. I set up the Integration Process and imported into the directory. But when I run a sample message, XI never picks up the integration process and spits out an error that a receiver wasnt determined. But actually 2 sets of receiver , 1 for file sender to Integration process and the second from Integration Process to the receiver have been set up with proper sender and receiver agreements. What could be the issue?
-Teresa

HI,
So in the SXMB_MONI -are you able to see IntegratioN Process ? i.e SXMB_MONI->PE is it shows BPM ?
No, I am not able to see the PE process.
1) Hope you have activated the IntegratioN process in the Repository and imported this into Directory
Yes..I have activated it.
2) Check the Receiver Determination Between Sender and BPM. is it activated ?
Activation is perfect.
3)Go to SXI_CACHE and check the return code for the Integration Process
Return code is 0 in SXI_CACHE.
4) if not try to reimport the BPM again into Ditrectory and re-run the scenario.
I tried it once and its still the same.

Changes to custom VO not reflecting

Hello All,
I created a new VO which extends standard. I did a jpximport. First time it worked. But now when I make changes to the VO files, the changes, query and new attributes, are not reflecting on the OA page. The page is picking the old version. Saw the details through About Page. Apache was bounced a couple of times still no use.
Can anybody tell me if I'm missing out anything here ?
Thanks.

You can also use functional administrator responsibility.
--Shiv

Changes to password are not reflected immediately in the application

Hi All,
If I change the password either from the console or through the application
itself, the change are not reflected immediately. They are reflected when I
shutdown both the admin server and managed server and bring them up. I think
the previous password is cached somewhere. If so, how to refresh it. When I
am changing the programatically ie using
User.changeCredential(oldPassword,newPassword);
I am refreshing the realm by using RealmMBean.refresh() . But it is not
working. Right now i am using default file realm. Can anyone tell what i
am missing here
Thanks in advance
Suresh

Suresh,
If your custom user extends DefaultUserImpl then you can update the password
in that instance within the method User.changeCredential(...) as
Construct the userinfo object with the old password
Authenticate the user against the realm with the userinfo -- returns the
customuser
customuser.setCredential( ** new passsword**) (setCredential method of
DefaultUserImpl)
update the file/database
Hope this works.
-- Sunny
"Suresh Done" <[email protected]> wrote in message
news:3b4a4d7e$[email protected]..
Hi All,
If I change the password either from the console or through theapplication
itself, the change are not reflected immediately. They are reflected whenI
shutdown both the admin server and managed server and bring them up. Ithink
the previous password is cached somewhere. If so, how to refresh it. WhenI
am changing the programatically ie using
User.changeCredential(oldPassword,newPassword);
I am refreshing the realm by using RealmMBean.refresh() . But it is not
working. Right now i am using default file realm. Can anyone tell what i
am missing here
Thanks in advance
Suresh

QM03-Custom tab-Change to text field not reflecting-FG - XQQM-screen-0106

Hi,
I have a requirement to change the text field on a custom tab of QM03 transaction. Quality notification type is Z1 and the tab is "Checklist". Both are custom defined.
The existing text field is of 3 lines. The new text message is of 8 lines. When I did the changes on the custom screen 0106 in the function group XQQM, the changes are not reflected on the QM03 transaction's custom tab. Only first 3 lines were reflecting the change and rest of the 5 lines are not appearing on the screen.
Pointers on this will be definitely helpful.
Regards,
Mallika.

I had a similar problem, but it was with the message line. I found that with Web Forms, I had to issue the Synchronize; a second time, but in Client/Server Forms 6i, the first synchronize worked. Here is the code I used:
<pre><font face = "Lucida Console, Courier New, Courier, Fixed" size = "1" color = "navy"> SYNCHRONIZE;
if Get_Application_Property(User_Interface) = 'WEB' then
synchronize;--first does not work on web
end if;</font></pre>
Let us know if this works.

Changes made in ECC not reflected to CRM

Just encountered a problem. As follows:
1. When a line item in a sales order in ECC is rejected with a reason, the changes are reflected back to CRM. Likewise, when the PO number field in the sales order is changed, the changes are reflected back to CRM. This is ok.
2. But when I make a change in the address fields (i.e. change the street) in the ship-to partner (on the header level) in the sales order in ECC, the changes are not reflected back to CRM.
Has anyone encountered this issue before and if so, what was the solution?
Will reward points...

Hello,
Check the inbound queue in CRM and outbound in R/3.
Prase

Changes in Active Directory not reflected in SharePoint user info

I have change the manager & name in Active directory but it's not reflecting in sharepoint. I found one command
stsadm -o migrateuser
   -oldlogin <domain\name>
   -newlogin <domain\name>
   [-ignoresidhistory]
But i don't want to do one by one i have many users is there any command for migrate all updated user information

The migrateuser command is really only when a user's ID changes. Making changes such as name and manager should still be reflected under the original ID. If the changes doesn't propagate, ensure that your User Profile Service Sync completed successfully.
Check for errors and address any you find. A successful sync will propagate the changes properly.
Start here:
http://technet.microsoft.com/en-us/library/ff382639(v=office.15).aspx
I trust that answers your question...
Thanks
C
|
RSS |
http://crayveon.com/blog |
SharePoint Scripts | Twitter |
Google+ | LinkedIn |
Facebook | Quix Utilities for SharePoint

Changes to HTML template not reflected in production

Hi All,
I am facing the following issue.
I have changed an already existing screen(HTML template) and published the service. It is working fine in development environment. This is now transported to production environment and the screen change is not reflected here. We have tried refresing the ITS buffer, but hasnt worked. Any pointers would be of great help.
Thanks,
Shruti

Hi Shruti,
did you check the changed template in the productive environment? Did the transport successfully reached the new system?
If the changed template is available please (re)publish the file on the new environment.
Regards,
Sabine

Changes to Integration Process not reflected at runtime.

Similar Messages

Maybe you are looking for