Changes to Jpeg not Showing in other programs

I made changes to a JPEG using bridge and the raw filter and notice it does not show those changes in other programs. I usually use DNG's and notice that other programs show the image correctly modified, I think there is a new thumbanil embedded. Do changes I make in Bridge using the Camera Raw Function only show in Bridge? Is there a workaround, or a way to show the changed version? I have a ton of JPEGs lately that I noticed show no changes.

Well, that isn't what I do. I guess we all have to develop a workflow that works for us. I treat the downloaded JPEG files as "master" files. I do the adjustments in ACR because, as you say, it's always possible to go back to the original image. So my workflow involves saving copies of the images (not overwriting the original images) in a separate subfolder. Yes, that involves more disk space, but that is how I prefer to work.
If you are not familiar with Dr. Brown, then you have a real treat in store for you. He is kind of crazy, in a good sort of way. And he has a lot of excellent tutorials and some free Photoshop add-ons. Here is the link to his website:
Russell Brown Show
Just click on "Photo Tips and Techniques".

Similar Messages

  • Why did the trace NOT show the other switches in between?

    I have a PC that is connected to a switch (A) in a network. Switch A has many switches in between and connects to another switch B. When I did a trace to the server, the last switch I see in the result is switch B. Also, when I checked to which port of switch B that the server was connected, It showed as Po1. When I did a show cdp neighbor for the interfaces for the interfaces involved inthe bundle, I get a switch and then another. Why did the trace NOT show the other switches in between? Why did I get an arp on Switch B? Could some one explain?

    It's hard to tell, but if you have L2 switches, the addresses on those L2 switches are for management purposes only and you won't see a response from a trace. The only time you'll see a response is when the packet is routed between devices and not switched. You'll get an arp request/response across a single vlan. If you have vlan 10 across 10 switches, all 10 switches will see an arp request because they're broadcasted throughout the whole vlan.
    HTH,
    John
    *** Please rate all useful posts ***

  • FLVPlayback controls are not showing in other people computer on there browser...

    Hi,
    In my project I have to play a flv vedio in swf file so in place a FLVPlayback component in one movieclip and when I hv to show I make that movie clip visible and play the vedio from starting.
    Its working fine on my computer but FLVPlayback controls (play pause button, seek bar volume controls) are not showing in other people computer on there browser...

    Then set "base" attribute to "swf" or "./swf" (relative path - can't remember which ), or absolute path to the "swf" directory.
    Kenneth Kawamoto
    http://www.materiaprima.co.uk/

  • Firefox unable to connect after brand new first time installation, IE can load fine, I have followed all directions for firefox can not connect but other programs can, and it did not solve the problem

    I have downloaded Firefox for the First time, Firefox can not connect to any website (Unable to COnnect), but IE can. I have followed all the directions on the page for firefox can not load when other programs can (Firefox connection settings,IPv6,DNS Prefetching, firewall settings)
    == This happened ==
    Every time Firefox opened
    == I downloaded it for the 1st time ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; Trident/4.0; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 3.5.30729; .NET CLR 3.0.30729; MSN Optimized;US)

    http://support.mozilla.com/en-US/kb/Firewalls
    http://support.mozilla.com/en-US/kb/Cannot+connect+after+upgrading+Firefox
    http://support.mozilla.com/en-US/kb/Error+loading+web+sites
    http://kb.mozillazine.org/Error_loading_websites

  • Why does emoticons sent from my iphone 4s does not show on other phones

    why does emoticon sent from my phone does not show on other phones

    iOS emoticons are Unicode characters that need a certain set of glyphs to be able to be displayed—think of it as a missing font not displaying correctly. If the device you send them to doesn't have the "font", it can't show it.
    That's just the way it is.

  • Audiobook does not show on other computer and IOS devices.

    Audiobook purchased on iMac does not show on other computer and IOS devices. Music i buy in the store does show up. settings have been checked and books

    This has nothing to do with iCloud.  Try one of the iTunes forums:  https://discussions.apple.com/community/itunes

  • Changes not showing in other instance of web logic server after deployment

    Hi Everyone,
    My Jdev version is 11.1.2.3.0.
    I have developed one ADF application and deployed into web logic server from Jdev itself and is working fine with the URL.
    Now the same EAR file is deployed into other instance of web logic server. it was working fine too.
    NOw i have modified some columns in the table in ADF page and modified the URL of the page in Controller project properties Java EE Application tab and deployed the page in first instance through Jdeveloper only and is working very fine with the new URL and with the new changes.
    But when i deploy this EAR file into other instance of the web logic server i got following problems:
    1. URL is not being changed. --> page is running with the old URL only.
    2. Changes to the ADF page is not reflected.
    3. Test point for this application is blank in web logic server.
    What can be the issues with this?
    Any suggestions will be really useful.
    Thanks.....

    About the context URL:
    There are 2 ways to change the context URL, 1 for design time (the one you used) and 1 for deploy time.
    All info here: http://one-size-doesnt-fit-all.blogspot.be/2010/12/adf-changing-your-applications-url-or.html

  • E9 photo fix not showing in other photoshop or programs

    I spent a long time fixing several problems of a photo in Elements 9 and saved under a new name so I could keep the original.
    I later opened the newly named photo in Windows picture and fax viewer and it looked exactly as the original except for a whole picture tone change that was made to take out a red cast.
    None of the torn edge,  dust and scratches and water spot fixes were there.
    Curious I opened it in the older photoshop 7 and it was the same,  also the same in CS2.  Re-opening it in E9 it looks great with all the changes.
    Anyone have any idea why these fixes only are there in E9 but in none of the other programs.
    This is an older photo but is in color.
    Any ideas would be greatly appreciated.
    Other photos fixed in E9 have shown up just fine in other programs.

    Wow, this is unique!
    Can you please share the image and the editing steps so that i too can try it on my machine.
    Few moere questions:
    1. If you apply other editing steps on that original image and save, do you observe the same issue?
    2. If you apply the same editing steps to other image, do you observe the same issue?
    Or, is it just one time, with one specific image?

  • Preview Highlighting colours not showing in other PDF viewing programs

    Hi,
    I'm new to OSX and today discovered that Preview can mark up PDFs with highlighted colours - pretty cool
    However when the saved PDF is viewed with other programs; Adobe Reader XI on both Windows and MAC and Foxit Reader, the highlighted colours are so faint you can easily miss them and its very hard to distingiush between yellow and green.
    Anyone else come across this?
    Thanks
    Mike

    Same problem here.

  • Home directory not showing in other apps

    I use various programs that need to access files in my home directory, such as Adobe Lightroom. The only thing showing as folders are sharing and one other folder call business cards.None of the other folder or files show for selection. I have changed permissions for everyone to access the home directory but this does not help. This situation is also in Photoshop, Bridge and other programs. How can I fix this so all the files are accessible no matter the program that needs to access these files?
    iMac 27", late 2012
    OS X 10.9

    dengosha wrote:
    In Lightroom or any other prograsm, there is no mini menu that appears... I am not a newbie at ussing a mac. Got my firt one in 1976.
    That was the first one alright, but it wasn't a Mac, lol! Mine was 1982 Apple lle. You never know the skill levels of folks posting here, so you have to cover the bases. I'm not running Adobe, so unfortunately I can't test that. I'll try to get you someone running LM or PS. But it is a Sunday... so hang in.

  • Control pannel not showing some installed programs

    my os is win 7 and my control pannel is only showing google chrome and microsoft . net framework 4 client and ms office enterprise.but i have installed many programs such as mozila,adobe reader,avast antivirus and so many others but they are not showing
    in my control panel programs..but at present they are working properly they are opening i am not having trouble with that..but i want to uninstall some programs and not finding a way i used even c cleaner tools but of no use..i started system scan but of no
    use..pls suggest a solution

    Hi,
    When you launch Control Panel\Programs and Features, aren't you able to find the installed programs there?
    All programs icons stored under control panel\Programs and Feature are related with registry keys
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall
    and
    HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432node\Microsoft\Windows\CurrentVersion\Uninstall  (64 bit system)
    If these keys are corrupted or you don't have enough permissions on these keys, then the program icons will not be displayed under Programs and Features.
    Yolanda Zhu
    TechNet Community Support

  • When l burned my final production it dose not show in other dvd player

    when l burned my final production in macbookpro as a dvd. l can replay in my macbookpro but it does not showing in an other dvd player. please help me l am very desperate with this problem.

    And you used what program to create and burn the DVD? There's a forum for that.

  • HT3965 How do I change the ID that shows on other people's phones when I call from my iPhone five

    How do I change ID that shows on other people's phones when I call from my iPhone5?

    my son had this problem.  I went to the apple store and they wiped out and restored the phone..  They said that was all they could do but that I should call our phone carrier and ask them.  I did.  They asked if in the top left side, next to battery power there was a icon of a half moon.  There was. They said to go in to settings and go to "Do not Disturb" and turn it off.  I did.....problem solved!!! Somehow "do not disturb" was turned on and that is what happens if it is!!
    I hope this helps.

  • Change Password does not show Correct Error Message

    Hi,
    I am using a password policy which says that Characters not allowed are @&()|\";'<>+=/?. :}{][
    When the user try tochange the password and try to put any of the above character,
    then OIM Web console shows an Password Policy error, which is correct.
    The Problem comes in when the Webconsole does not show the full range of the unsupported characters,it only shows the below error
    Password Policy Error
    The following password policy rules are not met:
    Invalid Chars=/?. :}{][
    Ideally it should have shown the full set of unsupported characters, which led the user to do the mistake again by selecting same old special charcter.
    Although,the logs at the back end, shows full set of characters.
    My Question ,is how could this be fixed,what customization has to be done if any ,for reflecting this change on WebConsole page.
    Cheers
    Ak

    Hi,
    I resolved the issue by changing the Characters not allowed to =@&()|\";'+/?. :}{][
    instead of @&()|\";'+=/?. :}{][
    What i figured out is all the charcters after = are only getting printed at the Web Console, so i reshuffle the charcters and put = in the beginning.
    And it is working fine.....
    Strange huh.....:)
    Cheers
    Ak

  • CS6 beta not showing in Win7 "Programs & Features"; Can't uninstall

    Trying to uninstall PS CS6 beta - but it is not showing in Programs and Features. Have scanned the Registry and there ARE references to PS CS 6 there...
    Is there any way to 'unhide' it or other way to remove the program?

    I'm sorry to ask a patently obvious question, but you did look up near the top, in the A section, right?
    -Noel

Maybe you are looking for