Changes to org plan
Guys,
I need to make changes to the org plan by creating new company nodes and moving the users in line with the new structure.
Do I do this in production? or do I do it in Dev and transport it? I wasnt sure that it requires a config change so how is it transported?
B
See *********** below
Dinesh wrote:
Unfortunately I don't have access to the system now.
Hence can't give you the exact parameters maintained.
But the doc mentioned will certainly help you.
From my memory:
First you need to maintain a distribution model from Quality to production.
This model should be with message types HRMD_ABA & HRMD_B.
Then you need to set filters as per the doc.
Distribute the model and generate the partner profiles.
the trx is PFAL in SRM.
you need to give the org ID of root node from quality to production.
The parameters to be referred from the doc.
first you run this trx with message type HRMD_ABA for org units
and then with HRMD_B for attributes.
check WE05 in target system for IDOC entry.
Sorry but i can not help you fully.
BR
Dinesh
Sorry but this is not clear to me.
How do I maintain a distribution model from Quality to production?
What model should be with message types HRMD_ABA & HRMD_B, how do I do this?, tcode?
How do I set filters as per the doc?
How do I Distribute the model and generate the partner profiles?
etc
Cheers
B
Similar Messages
-
Hi,
Anybody here with practical experience regarding transporting changes to org plan from a test to a productive client?
What changes can be distributed/transported, what is the tool (ALE or report), what are the restrictions?
- org units, EBP users (business partner, position, central person), attributes?
- reassignments of org units including all its employees?
- new employee for an org unit?
- change of employees attributes, e.g. slimapprover, spending limit, product category?
Your response is appreciated.Thanks for your reply.
Have you ever done this? Does it work properly? Are you using ALE IDOCs or report RHALEINI?
In the document you mention I understand the initial replication part but not the distribution of everyday's little changes.
I tried e.g. to change attribute with RHOMATTRIBUTES_REPLACE and could not even specify all needed attributes.
What happens e.g. to vendors and locations? They are part of the org plan, can they be transported? Since they are business partner does that mean this transport tool also distribute bp changes?
Thanks. -
Number Range assignment to Org plan/model
Hi,
have a question on number ranges w.r.t Org plan.
in CRM 5.0, my number assignment is independent of all plan versions (maintained 'X' in t.code OONC).
Now I want to create a new number range and assign it to the new org model/plans that I will be creating - how do I do it.
I could define the new number range but am not sure how to assign this to the org plan. If I explain it the other way, how does the Org plan determine which number range it has to use ?
will reward points.
thanks
kumarThanks Robin for your response. I did reward points to you. Its useful to understand HRALX-OSUBG function.
I did assign the new number range id here as per your message and saved but when I try to create the new Org model/plan, it still takes my old range - is there any dependency as well that I need to change?
One more observation, on the same table T77S0, I have the value '1' for HRALX-ONUMB.
I changed HRALX-ONUMB to '2' and then maintained HRALX-OSUBG with the Z1 number range (custom), but still my Org model determines the old number range?
Could you suspect something?
thanks
Kumar -
Repalce old user ID with new user ID in Org Plan
Hi,
I have a requirement. In our company, we have different type of user IDs for permanent employees and contractors.
Whenever the contractors postion gets confirmed we will create a new user ID for that person.
Now this new user ID has to be updated in the SRM org plan.
As the user's old user ID is already assigned in the org plan and at the same time user have created lot of shopping carts, we want to replace his old user ID with the new one so that all the shopping carts will not get deleted.
Basically I want to know, how to unassign the user ID from business partner and assign a new user ID.
Is it possible to replace like that? Please advise.
Thanks,
SS
Edited by: SRM Stranger on Apr 10, 2009 1:26 AMHi,
I noticed a feature in txn: BP --> Relationship
In the relationship category, I could see two categories: Replaced by, Is replacing. Not sure what is the exact functionality of that.
Do any one knows about that feature? Could you please advise me on that field?
Also, Is it possible to change the validity period of BP or user assignment ?
Will the above two resolve my issue?
Since user has created many shopping carts and user needs access to those SC with his new users ID, I would like to confirm with you before taking any risk.
Please help.
Thanks,
SS
Edited by: SRM Stranger on Apr 10, 2009 4:32 PM -
Change Service Order Planning Plant
Hello -
I have a business requirement for changing the Maintenance Planning Plant (CAUFVD-IWERK) on the service order mid stream during processing if a location can't handle the workload. Rather than changing the work center and plant (CAUFVD-VAWRK), they want to flip the entire order to the central distribution center. My issue is that the Planning Plant field is a protected field on the service order, and I can't find any configuration point to change this setting. I can change this on the Notification, but then I have two service documents that are out sync with their org level assignments. The business objective is to eliminate the step of creating a new order by flipping the planning plant assignment. Any ideas?
Regards,
Nick CarmichaelWe have situations where orders are created by local Planning Plants for national customers, if they determine they cannot meet the demand for the order, they have the right to change the assignment of the order to the national planning plant. Currently, the only way to complete this process is to close the current order and create a new order for the national planning plant. The business requirement I am trying to meet is to allow a 'flip' of the order from one planning plant to another without going through the process of closing the current order and creating a new one.
Regards,
Nick -
Transport request when saving Org Plan
Hi All,
When I create the org plan (PPOCA_BBP) or vendor group (PPOCV_BBP) I'm being prompted to create a transport request. I've never seen this happen before.
Does anyone know if there are any system settings that need to be made to stop this happing?
Regards
ChrisDear Chris,
I am not sure about Org Plan and Vendor Group, but, usually you would need to assign your customization to a transport request so that you could transport them from Development to Quality and Quality to Production Server.
However, you can override the settings in SCC4:
under Changes and Transports for Client-Specific Objects:
*Changes without Automatic Recording
*Automatic Recording of Changes
*No changes allowed
*Changes without Automatic recording, not transports allowed
Hope this will help.
Regards,
Naveen. -
How to change the explain plan for currently running query?
Hi All,
I am using Oracle enterprise 9i edition. I have a query which frames dynamically and running in the database. I noticed a table with 31147758 rows
in the query which has no indexes and taking more time to process. I tried to create an INdex on that table. I know the query is already running with a FULL table scan. Is it possible to change the explain plan for the current running query to consider the INDEX?
[code]
SELECT /*+ USE_HASH (c,e,b,a) */
d.att_fcc extrt_prod_dim_id,
d.att_fcc compr_prod_dim_id,
a.glbl_uniq_id glbl_uniq_id,
to_date(c.dit_code,'RRRRMMDD')STRT_DT,
(to_date(c.dit_code,'RRRRMMDD')+150)END_DT,
a.pat_nbr pat_id,
a.rxer_id rxer_id,
e.rxer_geog_id rxer_geog_id,
a.pharmy_id pharmy_id,
a.pscr_pack_id pscr_pack_id,
a.dspnsd_pack_id dspnsd_pack_id,
DENSE_RANK () OVER (PARTITION BY a.pat_nbr ORDER BY c.dit_code) daterank,
COUNT( DISTINCT d.att_fcc ) OVER (PARTITION BY a.pat_nbr, c.dit_code) event_cnt
DENSE_RANK () OVER (PARTITION BY a.pat_nbr,
d.att_fcc
ORDER BY c.dit_code) prodrank,
DENSE_RANK () OVER (PARTITION BY a.pat_nbr,
d.att_fcc
ORDER BY c.dit_code DESC) stoprank
FROM
pd_dimitems c,
pd_pack_attribs d ,
lrx_tmp_rxer_geog e,
lrx_tmp_pat_daterank p,
lrx_tmp_valid_fact_link a
WHERE c.dit_id = a.tm_id
AND e.rxer_id = a.rxer_id
AND a.glbl_uniq_id = p.glbl_uniq_id
AND p.daterank > 1
AND a.pscr_pack_id = d.att_dit_id
[/code]
The table lrx_tmp_pat_daterank is having that 31147758 rows. So I am wondering how to make the query to use the newly created index on the table?Why do you think using Indexes will improve the performance of the query? How many rows this query is returning? Optimizer might chose a Full table scan when it finds out that Index plan might not be useful. Why are you using /*+ USE_HASH (c,e,b,a) */ hint? This Hint will force oracle to use Full table scan instead of using the index. Try removing it and see if the plan changes.
Regards, -
How to change posting of Planned Delivery cost in Po?
i need to change posting of planned delivery cost in PO to other expense account.
as when i enter any planed delivery cost in PO it direct posted to the inventory account but i need to change it to be posted to other account.Hi Dear,
You need to maintain the Account Key for the condition type in the Pricing Procedure.
and then for the same key maintain the GL account in the OBYC settings.
Hope it helps you.
Regards,
Yawar Khan -
I changed my data plan from 6g to 8g while my daughter who attends college outside of the US at Toronto Canada (and we have on a international calling and international data plan) was on spring break at her grandparents house here in the US. I made the change online since I had been waiting on the phone for over 10 minutes for a customer service rep to come available. Well when I made the change online since that seems to be the thing that Verizon wants it's customers to do and I didn't see all the different plans available and just did the upgrade to 8g. Next bill had over $900 in roaming charges on her phone line. I called the 1-800 number and waiting for a service rep and after 20 minutes of waiting and being put on hold was told it was the customers mistake and there was nothing they could do.Thanks for nothing. I called back after thinking about it and wondered why changing a data plan for the phones in the US would change a international call plan. Waiting over 10 minutes again between waiting for a service rep and hold for one to answer the call. Gave her all the information about it and she said she would call back. Well, 4 days later over the weekend she had nevered called back. So on the phone again for the third time and after 20 plus minutes again was told that when I did it online I click the plan that didn't include international call only the data plan. Explained that I never saw the difference in the plan packages so put on hold again and was told that they could credit $100 to my bill. Wow, thanks alot !!! We have been Verizon customers for probably atleast 12 years and this is how you treat your long term customers?
Verizon Wireless Customer Support wrote:
AHARDY454,
We definitely want to review options on what has happened. We are now connection, so you can hover over my username and send me a Direct Meesage so we can review your account information. We look forward to reviewing.
Thank you,
TonyG_VZW
Follow us on Twitter @VZWSupport
TonyG_VZW they can't exactly hover over your username unless you actually link it in your post. The generic username for all the reps just doesn't fly. -
Previously my account was set up so my daughter and I got texts when the bill was due. I recently made some changes in our plan and now this is gone. How do I get this back?
Sorry, without knowing the Apple ID/Password that was originally used to activate this phone, then there is no way to re-activate it, as you've found out.
Apple can't/won't help you. Your choice is to get this info, or you simply won't be able to re-activate this phone.
If you ex won't give it to you, then consult a lawyer. -
User Exit/Badi to change the billing plan date when create sale order
Experts,
Please advise which user exit/badi can be used to change the billing plan date wen create sale order.
My requriement is based on some rules to dynamically change the line item billing plan start date and end date when create sales order.
I tried some user eixt in MV45AFZZ, but the date got revert to the orginal date from billing plan.Hi,
check the include MV45AFZB.
Thanks & Regards,
Sateesh. -
Display/Change/Delete of planning object not working in BPS
Hi Guys
While displaying or changing object in planning workbench, system is taking too long to process the request and request doesn't completes even in hours. The following operations are not working
1. Delete Planning Area/Level.
2. Display/Change planning Level.
3. Display/Change Planning Layout.
4. When clicking on Variable Tab of infoarea.
5. When clicking on Set variable button.
In all of the above mentioned cases System displays a message "Generating Environment" and it runs for indefinite time.All this is ha0
We are on Suppport Pack 12 of BI NetWeaver(2004S)and we are using BPS for our planning application.
Thanks
Tripple kHi Dear
Thanks for info. i know that it will take some time to regenerate the BPS classes after making changes in cube but in my system its taking at least half an hour which i think is too much.....i don't think that its normal behaviour of system...
Thanks
Kamal -
HT1918 My Apple ID is disable and I want to change my payment plan with another credit car
My Apple ID is disable and I want to change my payment plan with another credit card
You might be able to re-enable your account via this page : http://appleid.apple.com, then 'reset your password'
You might then need to log out of your account on any iOS devices that you have by tapping on your id in Settings > iTunes & App Store on them and then logging back in so as to 'refresh' the account on them.
If that doesn't fix it then you might need to contact iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page
When it's enabled you can then follow the instructions on the HT1918 page that you posted from to change your payment method. -
Oracle Hint not causing any change to explain plan
Hi,
I was facing a problem about ORA-00600 for using Connect by Prior query,
details of which are at -
Connect by Prior - ORA-00600: internal error code, arguments: [kkqcbydrv:1
As is documented by Oracle, workaround for this is to use /*+ NO_UNNEST */ in query.
I displayed the explain plan for original query and after putting hint in query.
There is no difference in the explain plans, I am a starter for explain plans and don't know much of it.
But shouldn't the hint cause some change in explain plan?
Even the hash values as mentioned in explain plans are same.
Thanks in advance.
Av.Perhaps it would help if you put the query (with the hint) and the explain plan here.
-
FM/BAPI for changing the inspection plan
Hi,
I need to change the inspection plan.
Can anyone suggest any FM or BAPI please.
When I am trying to use BAPI BAPI_INSPECTIONPLAN_CREATE for this purpose,
I am getting the below mentioned errors:
E BAPI 001
A CPCL 006 Task list Q Q0000171 1 already exists
A CPCC_DT 210 For further processing, the routing entry is missing
Thanks in advance.Hi,
Could you please help me with the fields that need to filled for this purpose ?
I am currently filling the TASK and INSCHARACTERISTIC structures with the following fields filled:
TASK:
TASK_LIST_GROUP
GROUP_COUNTER
VALID_FROM
VALID_TO_DATE
TASK_LIST_USAGE
PLANT
TASK_LIST_STATUS
TASK_MEASURE_UNIT
LOT_SIZE_FROM
LOT_SIZE_TO
INSPCHARACTERISTIC:
TASK_LIST_GROUP
GROUP_COUNTER
ACTIVITY
INSPCHAR
QUANTITATIVE_IND
MSTR_CHAR
PMSTR_CHAR
CHA_MASTER_IMPORT_MODUS
CHAR_DESCR
UP_TOL_LMT_IND
LW_TOL_LMT_IND
TARGET_VAL_CHECK_IND
TARGET_VAL
UP_TOL_LMT
LW_TOL_LMT
But still I am getting the error mentioned above(previous message).
Thanks
Shilpika
Maybe you are looking for
-
If I import a finished project form imovie hd 6 into imovie 08 then export, will imovie 08's better hd output capabilities apply in the same way as if i just did the whole project in imovie 08? phew...
-
Attach Pdf output into transaction FB03
Hi experts, My requirement is to attach Pdf output coming from FM CONEVRT_ABAPSPOOLJOB_2_PDF into transaction FB03 (SERVICE attachment list) Needs pointers for this. thanks Manish Puri
-
Customizing BW and R/3 Extractors
hi what we mean by customizing BW and R/3 extractors,, and how exactly we work on it.. wat is the purpose of customizing... ashwin
-
How do I install Tekton MM in CS5 running on Windows 7 (32-bit)?
I called up a file done in an earlier version of InDesign (probably CS4) on my previous computer running Windows XP, and on the new computer it indicated that Tekton MM regular was missing. I had the Tekton MM files on my old computer in a PSFonts fo
-
Hi All, OS: windows DB:11g Why is that when I shutdown my database and take the cold backup of my database and at the time in which the files are getting copied, I try to startup database, Oracle do not allow me to start the database and throws an er