Changes to pmset being ignored
This is a question for advanced users.
I'm on a mid-2012 "MacBookPro9,2"
Before I upgraded to Mavericks, I was using the most up-to-date version of Mountain Lion.
In Mountain Lion, I had my pmset standbydelay set to 24 hours instead of the default (I think) 4 hours, so that waking from a laptop left closed overnight would take a few seconds rather than a minute or so (avoiding SafeSleep).
Right after I updated to Mavericks, I stupidly edited my sudoers file with vim rather than with visudo. That broke "sudo," but I seem to have fixed it (followed the directions here: http://astrails.com/blog/2009/9/29/how-to-fix-a-hosed-etc-sudoers-file-on-mac-os x [gave admin write privileges using Finder, commented out the line I added with vim, un-commented the line with visudo, removed admin write privileges using Finder]) — after doing that, "sudo" started working just fine again. Haven't had any problems using "sudo" since.
(I don't know if anything in the previous paragraph is relevant, but it seems like it might be.)
After I got that sudoers business sorted out, the next morning I opened my laptop to find that it had been in SafeSleep. I realized that the Mavericks upgrade must have removed my pmset standbydelay customization, so I once again changed it to 24 hours ("sudo pmset -a standbydelay 86400"), and "pmset -g" confirmed that the change was accepted. The PowerManagement plist reflected my change, too, so I thought everything was good.
But then the same thing happened the next morning—SafeSleep was not avoided. I shut down the laptop and started it up again, only to find that the standbydelay setting had reverted to the 4-hour default in the PowerManagement plist. I think maybe this had something to do with the whole sudoers debacle (not sure), because after I re-implemented the 24-hour standbydelay and shut down and restarted a second time, my settings stuck (and that has been my experience since then—the standbydelay remains set to 24 hours).
But the weird thing is that the laptop still goes into SafeSleep as if I had never changed the standbydelay setting. Every morning when I open the laptop it has to come out of hibernation, even though the PowerManagement plist still says standbydelay is 86400 seconds.
I've tried:
--changing hibernation mode to 0 ("sudo pmset -a hibernationmode 0")
--deleting PowerManagement plist, rebooting, re-implementing the 86400 standbydelay and/or the 0 hibernationmode
--repairing permissions in Disk Utility
--reinstalling Mavericks (I was surprised that my customized sudoers file and PowerManagement plist were unchanged by this)
Ultimately the problem is a minor nuisance, but I can't for the life of me get my pmset changes to work, even though "pmset -g" and the plist reflect my changes. I wonder if it might have something to do with my sudoers idiocy (did I somehow permanently mess something up?), but sudo works just fine, so I'm not sure. Searching forums, I haven't found anyone else encountering problems with pmset in Mavericks.
Does anyone have any idea what might be happening here? It's so bizarre to me that changes to hibernation mode and/or standbydelay SEEM to be accepted, judging by the "pmset -g" command and by seeing my changes appear in the PowerManagement plist, but it's like my computer is simply ignoring those settings.
"pmset -g" yields this:
standbydelay
86400
standby
0
halfdim
1
sms
1
hibernatefile
/var/vm/sleepimage
disksleep
10
sleep
10
autopoweroffdelay
14400
hibernatemode
0
autopoweroff
1
ttyskeepawake
1
displaysleep
2
acwake
0
lidwake
1
But it still enters SafeSleep after 4 hours.
On my MBP early 2011, I do not have the "autopoweroff" or the "autopoweroffdelay" settings, but I do have "standby" and "standbydelay." I was having the same basic problem and the fix for my model turned out to be switching "standby" from 0 to 1. (Oddly enough, just having a MBP in hibernatemode 3 is supposed to produce the desired behavior [safe sleep = hybrid of hibernation + sleep], at least from what I understand.)
For those wishing to know if they have the "autopoweroff" pmset flags, type "pmset -g cap" into the terminal.
Similar Messages
-
My name is David and I've been a Verizon Wireless customer for the past few years. A couple of months ago, I began having issues with a brand new jetpack device. The device was using absurd amounts of data and I had no clue why. I contacted customer service and eventually got in touch with (removed) Smith, a supervisor. We talked about three times over the phone, on separate occasions, trying to figure out what was causing the problem. We reset the device, changed the password, etc., but nothing was fixing the problem. In the meantime, I had taken multiple steps to make sure nothing was using the data on my end. I set up a metered connection, which tracked exactly how much data went through my computer and it was not even close to what the jetpack was saying, despite being the only device connected to it. Ms Smith gave me her email address to stay in closer contact with her while we were trying all of the steps to fix the issue, so I could let her know exactly what I was seeing. The email address she gave me was (removed) Our contact first started in November and she sent me the first email on 12/1/13. The device began using even more data, now at a very alarming rate. In one night, it used 12.5 GBs of data. I spoke with her again on 12/14/13 when I first noticed how much data it had been using. She eventually sent me a new device, stating that the one I had was faulty and she wanted me to let her know when I got the new one so she could monitor the activity and see if it was following the same pattern or if it was acting normal. It ended up working 100% fine and not like the faulty device I had sent back in. She had told me over the phone that she would fix all of the overage charges from when I first got the device since it was messed up. She gave me credit for the total of overage from the first 3 months with the device, but she hadn't fixed the bill that had used 55 GBs of data, which was the last cycle in which I had that particular device.
The last time I heard from Ms. Smith was on 12/31/13 when she had told me she was going to fix the charges. In the meantime, I was left waiting to hear that the fourth and final month had been taken care of, so the $460 worth of overages was still sitting on my bill. On 12/31/13, she emailed me asking for my number to reach me on so she could call me that day. I responded with my number, but never received a call. A week later on 1/6/14, I emailed her again with my number, telling her that I wasn't sure if she had received my email or not, but I was still waiting. As of 1/21/14, I had still not received a call, so I emailed her again telling her I needed to talk to her ASAP so we could get everything resolved and I could pay my bill. I also mentioned that I needed to have my data plan changed back to normal (16 GBs) rather than the 30 GB plan because it was too much. I had been bumped up to 30 GBs during that big month of overages, to try and prevent extra charges. A little less than a week later on 1/26/14, I emailed Ms. Smith once again, telling her I was worried about my service getting cut off and I needed to speak with her ASAP. I mentioned that I did not want to have to start from scratch with someone else.
On 2/6/14, I woke up to discover that my service had indeed been turned off. I called and spoke with someone in customer service, explaining what had been going on. I was told by that representative that her supervisor would call me between 8-10 PM that night, but in the meantime my service would be temporarily restored. I never received a call. Around 10:30, I called back to try and speak with someone else. I was put through to another representative, once again having to explain what had been going on. This representative told me that I would have to wait for a call back from his supervisor, because he would be leaving at 11:00 PM. I explained to the representative that I was already promised a call back that night and didn't receive a call, so I had to have it taken care of because my service was shut off. His supervisor took my call and told me that there wasn't much they could do, because Ms. Smith had already started my case. He said they would send her an email, telling her she needs to contact me. He told me that he would have someone from his team call me back within 24-48 hours to see if she got in touch with me and if not, I would start from scratch with them.
In the meantime, I sent Ms. Smith an email the next day on 2/7/14, telling her my service had been shut off and I tried calling the night before to speak with someone else, but they couldn't do much for me because she had already been working with me. Again, I never did get a response.
Monday 2/10/14 had come along and once again my service was turned back off. I never did receive a call from the supervisor I spoke with on 2/6/14, who had promised me his team would call me back no later than 48 hours. So, again, I called to try and speak with someone else. I eventually got through to another supervisor, but after I explained to him what had been going on, the call was disconnected. I waited for about 30 minutes to see if he'd call back, but he didn't. Once again, I called to try and speak with someone else. I was directed towards the financial department and I explained to them that I was just talking with someone and was disconnected, so I was hoping to get back to them. I was told that there was no way to trace me back to the man I was speaking with. I then explained to that representative what was going on and she told me that if I paid the actual monthly access portion of my outstanding bill, my service would be restored and she would promise to put a note on my account to not turn it off again, because I was working to have the charges fixed. I paid the monthly access and she then transferred me to technical support to have someone in that department help me further. I then explained my story to the technical representative and she told me that her supervisor was not on-duty at the time, but she was preparing an email to send to her and she would definitely get back to me by the end of the week. That was two weeks ago from today and I've yet to receive a call from anyone.
Once again, I woke up today to find that my service had again been shut off. I called in and spoke with financial services and explained to them what has been going on and she said if I went ahead and paid my bill that had just come due for last month, she could turn it on. So, that's what I did, but I'm still left in the dark as for the future.
I am so beyond frustrated with this entire situation, that I have no clue what to do. I've told this story to at least ten people and I've gotten no where. To say that I feel like I'm being ignored, is an understatement. I can send y'all the entire transcript of emails with myself and Ms. Smith, proving that I've been trying to contact her for the past month and a half. This whole situation has gone further than the simple problem of the overage charges. It has now risen to a ridiculous level that I am being ignored by what seems like the entire company as a whole. How many times do I have to call to where I can finally work with one person who will help fix the problem? How many times can one customer be told that he will be contacted and he never receives a call? At this point, I am more than prepared to go over to Sprint and cancel my service with Verizon. The $460 that I am being raked trough the coals for will be nothing compared to not having my business for years to come. I am also prepared to contact and file complaints with the FCC or BBB for the fact that I have done absolutely everything in my power, including going in to a local store, to speak with someone about my issues. Like I said, I have the emails proving that I've been ignored and I can show them to y'all or to them. I don't know what to do anymore and I'm tired of calling and starting over with a new representative then being transferred around in loops where I have to re-tell the entire story again, so this is my last resort. If I don't get help by the end of the day, I'll be somewhere else tomorrow.
Private info removed as required by the Terms of Service.
Message was edited by: Admin ModeratorHi Barry,
I am sorry about the mix up with the order, could you send me a PM of your contact details? Please include the email address you used to contact support. -
Is the task-flow input parameter class value being ignored by the framework
hi
Although I don't remember where, I think I read or heard about the task-flow input parameter class value that it is "being ignored by the framework".
One example of this could be what is currently in the UI Shell sample application available
at http://www.oracle.com/technetwork/developer-tools/adf/uishellapp-134633.zip
It has in its task-flow in "flows\second.xml" an input parameter configured like
<task-flow-definition id="second">
<!-- ... -->
<input-parameter-definition id="__3">
<name id="__2">tabContext</name>
<value>#{pageFlowScope.tabContext}</value>
<class>oracle.ui.pattern.dynamicShell.TabContex</class>
<required/>
</input-parameter-definition>
<!-- ... -->
</task-flow-definition>Notice the missing "t" at the end of the class name "oracle.ui.pattern.dynamicShell.TabContex".
Still this task-flow configuration does allow to use expressions like "#{pageFlowScope.tabContext.selectedTabIndex}", which suggests that the class value is indeed "being ignored by the framework".
(see also forum thread "does the UI Shell sample break encapsulation in its task-flows"
at does the UI Shell sample break encapsulation in its task-flows )
All relevant references (bug numbers, documentation, blogs) explaining about this task-flow input parameter class value are welcome.
If no such references exist, maybe someone from Oracle can give some feedback.
many thanks
Jan Verveckenfyi
The feedback below was posted in the forum message
at Re: does the UI Shell sample break encapsulation in its task-flows
Richard Wright wrote:
That appears to be a bug for which I am seeking confirmation.There is an enhancement request (i.e., 9377487) submitted over a year ago, that describes this behavior. It is listed as an ER as our documentation (e.g., Fusion Developer's Guide for Oracle ADF, online help ) does not specifically state that Java class for the input parameter definition is checked for type. Further anything using EL is untyped. So the expectation that types are enforced is somewhat puzzling to the development team.
However, there is an acknowledgment within circles of the development organization, that some might come to have this expectation. One trigger might be the definition itself. The other is the existence of a design time audit on the definition. For example, if the class is specified inaccurately (e.g., typo), there is an audit warning to report "not found."
Under consideration are a number of framework proposals to check for type without breaking backward compatibility or adding overhead to the production environment.
In the interim, the following recommendations are given.
Unless this breaks or can break your app in some way, no need exist for change. Nevertheless, if this is a real concern, write a test or consider a java assertion. By default, assertions are disabled at runtime. There is no need to override that default.I have been able to find enhancement request 9377487, "TASK FLOW PARAMETER VALUES NOT VALIDATED ACCORDING TO CLASS", on My Oracle Support. It currently has "Status 15 - To Internal (Oracle) Review" and "Updated 16-Dec-2010".
In the context of service request 3-4185839067 recently bug 12838099, "THE TASK-FLOW INPUT PARAMETER CLASS VALUE BEING IGNORED BY THE FRAMEWORK", has been filed and it currently still has "Status 16 - Bug Screening/Triage".
- about "... the expectation that types are enforced is somewhat puzzling to the development team ..."
Hmm, strange ... so what are people supposed to expect when there is an option to configure a class name for a task-flow input parameter?
regards
Jan -
Orion-ejb-jar.xml being ignored
In oc4j 903 my orion-ejb-jar.xml file is being ignored at deployment time. It is in the META-INF directory of the ejb jar. Any ideas?
changes to this file only get reflected if the tags exist initially. You can;t add new tags and hope to see them miraculously appear - which would be nice! Delete the orion-ejb-jar.xml from the application-deployments directory of your app, and redeploy, a new deployment version of the file will be generated.
-
Is my cfif IsDefined being ignored?
I have a form that allows a user to upload up to 3 images.
They don't need to upload all three. For example, I get an error if
I don't upload all three images.
Despite having a <cfif> that uploads only if an image
if the field name is defined, I still get a "The form field Image2
did not contain a file" error. It seems my <cfif> is being
ignored and trys to upload a field that is not defined? Any ideas?
Thanks Rick
FORM PAGE
form action="act_uploadimage.cfm" method="post"
enctype="multipart/form-data">
<input type="file" name="Image1" >
<input type="file" name="Image2" >
<input type="file" name="Image3" >
<input type="submit" name="Submit" value="Upload">
ACTION PAGE
<cftransaction>
<cfquery name="Product" datasource="wioDB">
SET NOCOUNT ON;
INSERT INTO Products (CatID, USerID, Designer, Model, Color,
DressSize, Price, Material, Description)
VALUES ('#Trim(FORM.CatID)#',
'#Trim(SESSION.Auth.UserID)#',
'#Trim(FORM.Designer)#',
'#Trim(FORM.Model)#',
'#Trim(FORM.Color)#',
'#Trim(FORM.DressSize)#',
'#Trim(FORM.Price)#',
'#Trim(FORM.Material)#',
'#Trim(FORM.Description)#');
SELECT @@identity AS ProdID FROM Products;
</cfquery>
<cfif isdefined("form.Image1")>
<cffile action="upload" filefield="Image1"
destination="D:\inetpub\woreitonce\users\uploads\"
nameconflict="makeunique" accept="image/*" >
<cfquery datasource="wioDB">
INSERT INTO Images (ProdID, Image, IsPrimary)
VALUES (#Product.ProdID#,'#file.ServerFile#',
'#FORM.IsPrimary#')
</cfquery>
</cfif>
<cfif isdefined("form.Image2")>
<cffile action="upload" filefield="Image2"
destination="D:\inetpub\woreitonce\users\uploads\"
nameconflict="makeunique" accept="image/*" >
<cfquery datasource="wioDB">
INSERT INTO Images (ProdID, Image, IsPrimary)
VALUES (#Product.ProdID#,'#file.ServerFile#',
'#FORM.IsPrimary2#')
</cfquery>
</cfif>
<cfif isdefined("form.Image3")>
<cffile action="upload" filefield="Image3"
destination="D:\inetpub\woreitonce\users\uploads\"
nameconflict="makeunique" accept="image/*" >
<cfquery datasource="wioDB">
INSERT INTO Images (ProdID, Image, IsPrimary)
VALUES (#Product.ProdID#,'#file.ServerFile#',
'#FORM.IsPrimary3#')
</cfquery>
</cfif>
</cftransaction>I have almost the same situation and when I changed my cfif
to check for blank, it worked.
So my question now is when are you suposed to use isDefined
and when are you suppose to check for blank ?
If a field in a form is left blank, does that mean that it
does not exists, therefore using isDefined, or does that mean that
it exists but contains a blank value ?
I have the following code below. The first one works and the
second one does not, but I changed it to check for blank and now it
works, so I am a little confused now. What does isDefine do and
when should it be used ?
<cfif isDefined("form.output_type")>
<cfset session.output_type = "#form.output_type#">
<cfelse>
<cfset session.output_type = "screen">
</cfif>
<cfif form.email_address is not "">
<cfset session.email_address = "#form.email_address#">
<cfelse>
<cfset session.email_address =
"[email protected]">
</cfif>
Thanks -
I have replied to you three times now without reply. I DID NOT authorise a payment of £9.99 for NowTV. What is the solution to getting my money refunded. I think you assume I will go away after being Ignored. No I will not go away. I find now that you have DISABLED MY APPLE ID. Is this a punishment you use to anyone who takes up a stand against charges being made unauthorised on their account?. Please tell me why you have disabled my account. When will my account be restored? If not when will you refund ALL my purchases made to APPLE/ITUNES? I can then move on to another brand and hopefully better customer service. After reading articles regarding APPLE ID DISABLED it appears common practice from your company to DISABLE anyone's account if they question unknown charges. Please reply with your intentions regarding the unauthorised payment and the DISABLING of my account.
David Forrester.
Sent from my iPad
On 18 Mar 2014, at 09:20, iTunes Store <[email protected]> wrote:
Follow-Up: 319042795
Hello again,
I wanted to send a quick note to see if you are still experiencing any difficulties with the iTunes Store. Resolving your issue is important to me, so please don't hesitate to reply if you need any further assistance.
Sincerely,
iTunes Store Customer Support
http://www.apple.com/support/itunes/ww/
Dear David,
Welcome to iTunes Store Customer support.
I understand that you have been charged an additional 9.99 GBP for a purchase that not authorized. I know how eager you are to know more about this purchase and I am happy to look into this for you.
David, the purchase worth 9.99 GBP was for a day pass from "NOW TV for Apple TV." To review your iTunes Store account's purchase history, please follow the steps in this article:
iTunes Store & Mac App Store: Seeing your purchase history and order numbers
http://support.apple.com/kb/HT2727
Please reply to this email and let me know if this purchase was unauthorized.
Thank you for being an iTunes Store customer. Have a great day!
Sincerely,
iTunes Store Customer Support
http://www.apple.com/support/itunes/ww/
Lang_Country: en_gb
User Storefront: UK
Concern Type: Problem Not Listed
Web Order #:
Content Title: NOW TV Day Pass
Provider Name: BSkyB
Track IDs: []
Purchase Date : 2014-03-16 12:33:48 Etc/GMT
Purchase Device : Apple TV
Comments : I am being charged for what is listed plus another _9.99 for Apple TV pass. Did not authorise this _9.99 charge and not sure what it is exactly.
<Personal Information Edited by Host>This is a user-supported board. You are not addressing Apple here. Nor is it a good idea to post your private information to a public forum. You should edit your post immediately.
Unfortunately no one here can access your support history. You must respond to the emails directly. -
I've been editing images with ease for a long time but now the changes are not being saved.
I've been editing images with ease for a long time but now the changes are not being saved.
Also, it is not liking me adding a large ammount of images in one go?Remember: we cannot see your machine. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Basic things like :
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For instance: 'iPhoto won't export' is best explained by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted?
- Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have. -
HT4075 I tried the steps mentioned above but the changes are not being saved.
I am not able to edit or merge PDF files. I followed the steps mentioned in the Mac support community but the changes are not being saved. Any solution to this?
The link you posted gives be a 404 not found message.
The reason you're getting the repeat is because your site name is wilgenroos.nl and the first page of your site is wilgenroos.
The standard URL for domain names that are forwarded with the CNAME method is:
http://www.domain_name.com/site_name/page_name.html.
You can change the site and page names in iWeb to give you something more informative about the site and page.
If you're publishing to a 3rd party server and want to get rid of the site name in the url and only have
http://www.domian_name.com/page_name.html
do the following:
publish the site to a folder on your hard drive (already done)
use Cyberduck to upload just the contents of your site folder to the root folder of your account on the server.
You should delete the old site folder and files that are currently there beforehand. -
In insert: Space after period and before carriage return is being ignored
I am using Oracle 11.2.0.2.
let say I create table temp(a varchar2(20);
insert into temp values ('value.
valuue2');
I have put space after 'value. ' but it is being ignore when I run it from linux host in sqlplus.
The space seems to be preserved when I insert it from TOAD/Windows xp.
Any idea what might be causing it.hI,
I have the same result in SQLPLUS.
I would not rely on code with strings spread over multiple lines you should use the below code to add newlines:
insert into temp values ('Yes.Space. ' || chr(10) || 'x');This makes it very clear there is and a space and a newline.
This is much easier to maintain as well.
Just to compair the two, see below:
select
LEVEL
,substr(a ,level,1)
,ASCII( substr(a ,level,1) )
from
SELECT
'YES.Space.
x' A
FROM
DUAL
connect by --NOCYCLE
level <= length(a)
LEVEL SUBSTR(A,LEVEL,1) ASCII(SUBSTR(A,LEVEL,1))
1 Y 89
2 E 69
3 S 83
4 . 46
5 S 83
6 p 112
7 a 97
8 c 99
9 e 101
10 . 46
11 32
12 10
13 x 120
13 rows selected
select
LEVEL
,substr(a ,level,1)
,ASCII( substr(a ,level,1) )
from
SELECT
'Yes.Space. ' || chr(10) || 'x' a
FROM
DUAL
connect by --NOCYCLE
level <= length(a)
LEVEL SUBSTR(A,LEVEL,1) ASCII(SUBSTR(A,LEVEL,1))
1 Y 89
2 e 101
3 s 115
4 . 46
5 S 83
6 p 112
7 a 97
8 c 99
9 e 101
10 . 46
11 32
12 10
13 x 120
13 rows selected Regards,
Peter
Edited by: Peter vd Zwan on Apr 19, 2012 1:06 PM -
/Library/Preferences/loginwindow.plist being ignored by system
Here's one that I've not seen anyone else report.
I've been creating a system image of OS 10.4.5 and every time I lay the image down and log in using any user account, the items entered into the global loginwindow.plist file are being ignored. To put it in basic terms, it behaves as if the system doesn't even know that it is there. None of my global login items are being launched.
I have verified that the plist file is in the correct format, I've checked permissions, and I've even compared it to the same file in my previous system image. The previous system image never gave me this problem. I created both images from scratch using the exact same procedure, which I have documented step by step. There are only two exceptions. The second image (the one that doesn't work) was started by using the 10.4.3 install DVD, whereas the first image I used the 10.4 install DVD. Other than that, the first image was built after having been upgraded to 10.4.3 using Software Update, the second image 10.4.5 using the same method.
Has anyone seen this before? What else can I try, here? I feel that I have exhausted all options aside from starting over from scratch and using the 10.4 install DVD instead, so any help would be greatly appreciated.Oops, it was permissions after all. I was accidently setting the file to 600 after laying down the image. How I could have missed that?? Oh well.
-
I have a CMP entity bean, and I am having problems creating it:
I get :
cannot insert NULL into ("BEAKER"."COMPANIES"."PROFILE_ID")
...which means that the ejbPostCreate is being ignored and nothing is being inserted for COMPANIES and PROFILE_ID
My ejbCreate and ejbPostCreate have identical paramater headers so I am confused why it is not being called. I am using Sun One Application Server 7 which I think could be part of the problem.
My two methods are as follows :
* @ejb.create-method
public LongIdentifier ejbCreate(Profile profile,
String name,
Country country,
Currency currency,
String userName) throws javax.ejb.CreateException
try
setKeyValue(new Long(getSequenceGenerator().getNextCompanyId()));
catch (SQLException e)
throw new CreateException(e.getMessage());
catch (NamingException e)
throw new CreateException(e.getMessage());
this.setName(name);
this.setUpdatedBy(userName);
this.setUpdatedDate(new Date());
this.setCreatedBy(userName);
this.setCreatedDate(new Date());
this.setActive(true);
// EJB 2.0 spec says return null for CMP ejbCreate methods.
return null;
* Set all CMR fields for the CMP bean
* @param profile
* @param name
* @param country
* @param currency
* @throws javax.ejb.CreateException
public void ejbPostCreate(Profile profile,
String name,
Country country,
Currency currency,
String userName) throws javax.ejb.CreateException
//the following print statements are not showing in the log trace
System.out.println("in ejbPostCreate");
System.out.println("profile = " + profile.getName());
System.out.println("country = " + country.getName());
System.out.println("currency = " + currency.getName());
setProfile(profile);
setCountry(country);
setCurrency(currency);
//setCreatedBy(user);
}First of all CMP entity bean doesn't need
this.setName(name);
It is just
setName(name);
and ofcourse need to return null.
and I can see that you are not set the ID for the Profile_ID
that's while it is null value. If ID is not auto increasement then you need to set the ID there.. -
XML structure in "Bus Card Order Form" created in inDesign is being ignored by Acrobat>Tools>Forms>More Form Options>Export Data.
inDesign form also has DTD.
1. inDesign "BC Order Form" is output to interactive pdf fillable form
2. pdf filled form is then saved.
3. XML is then exported per above, however XML structure does not match. Rather, root is redefined as "fields' and all fields are listed alphabetically.
4. xml data does not flow into fields in BC template.
Both "Bus Card Order Form' and 'BC Template' have matching xml structure.
What am I doing wrong?Nevermind my previous post; I see the error in our own code. You're
right; the file isn't being used. This will be fixed in our 2.5 final
release. Sorry!
In the meantime, I suggest you continue to use the 2.4
kodo-reverse-schema.jar -
I have downloaded the HD version of a movie from itunes, but when I sync it to my iPad 2 it will not play. It appears that it is on the iPad, but it will not play. Is this because it is HD, and if so is there a way to change it from being HD? Thanks
I'm having a similar problem ... just used my iPad 2 to purchase the Bourne trilogy and it downloaded fine but I did not try to play it right away. Then I plugged the iPad into the computer and it downloaded the SD versions of the movie and I used iTunes to sync my movies. Then I tried to play it and it said it could not open the movie. I then did a full iPad restore and did a fresh sync and now I get the Cannot Opne pop up. Did you ever find an answer to your question?
-
Revision: 14474
Revision: 14474
Author: [email protected]
Date: 2010-02-28 23:53:31 -0800 (Sun, 28 Feb 2010)
Log Message:
Adding a 'dispatchInitialChangeEvent' parameter to the 'watch' method in order to allow the initial change event from being dispatched, continued.
Modified Paths:
osmf/trunk/framework/OSMF/org/osmf/metadata/MetadataWatcher.as*Feedback*
"Use the form below to send us your comments. We read all feedback carefully, but please note that we cannot respond to the comments you submit."
http://www.apple.com/feedback/ipad.html
We can complain about Apple's business decisions, but these discussions are user to user talk about possible solutions.
Here are the places to report bugs:
Get an account at
http://developer.apple.com/ then submit a bug report to http://bugreporter.apple.com/
Once on the bugreporter page,
-- click on New icon
-- See if you need to attach a log file or log files, clicking on Show instructions for gathering logs. Scroll down to find the area or application that matches the problem.
-- etc. -
Revision: 14473
Revision: 14473
Author: [email protected]
Date: 2010-02-28 23:45:28 -0800 (Sun, 28 Feb 2010)
Log Message:
Adding a 'dispatchInitialChangeEvent' parameter to the 'watch' method in order to allow the initial change event from being dispatched.
Modified Paths:
osmf/trunk/framework/OSMF/org/osmf/metadata/MetadataWatcher.asPerhaps you're not handling the "EndOfStreamEvent" correctly/at all, and thus not freeing up the socket to listen for the "NewReceiveStreamEvent " after the initial stream has ended...
?
Maybe you are looking for
-
Scenario One customer has two systems: System A and System B in his landscape. System A serves as the central server for item master data management. He maintains the same set of item master data in System B as that of System B manually. Now, the cus
-
Invoice to convert in PDF and send by E-Mail
I would like to Convert the OutPut of Invoice to PDF format and send it through E-Mail. Is there any SAP standard programme available to this or what is the process?
-
How to decide if an iCal event will send out an email to invitees?
Looks like iCal Reply Checker doesn't work anymore in the latest iCloud update of Lion (10.7.2)? Is there any way to add someone as an invitee, but not actually send them a calendar invite?
-
When will apple start to sell iPhone 5 cases
When will apple start to sell iPhone 5 cases
-
No sound from front headphone jack after SoundBlaster installat
Hi everyone, I recently bought a Sound Blaster Audigy 2 Value PCI Sound Card. I installed it as normal as any other PCI card. I disabled onboard sound in BIOS. I installed all the Creative software and drivers, and the sound is working...but only fro