Changes to published Locked Reference processor not reflected in process using that processor

I performed the following steps:
1) Created a Process A and made a processor P from a set of 3 standard EDQ processors in it
2) Published the processor P as a 'Locked Reference Processor' P1 (at Project Level)
3) Created a Process B that uses P1
4) Changed P to use a different logic check and re-ran it in process A (gave the results I expected)
5) Re-ran process B however that gave the original results from (3)
6) Re-published processor P as P2
7) Created a Process C that uses P2 that gave the new results from (4)
I was expecting at step (5) to get the results from the revised processor logic but perhaps I've misunderstood how this works so would appreciate your advice.
Also is it possible to 'unmake' the processor so that the group of processors (that one made a processor from) appears back on the process page.
Thanks, Nik

If you had re-published (step 6), writing over the existing published processor, and then re-ran process B (step 5), you would have got the updated logic. Otherwise you have not actually updated the processor, only the 'master process' the you initially published it from.
Hope this makes sense.
Regards,
Mike

Similar Messages

After updating my Macbook Pro retina display to os x yosemite 10.10.2, the mause and track pad locks, and do not respond especially when using the Mac for a long period, please help, how can I solve this, I do not like feel like in windows, so I paid

after updating my Macbook Pro retina display to os x yosemite 10.10.2, the mause and track pad locks, and do not respond especially when using the Mac for a long period, please help, how can I solve this, I do not like feel like in windows, so I paid good money for this mack, I feel calm

Hi Buterem,
I'm sorry to hear you are having issues with your MacBook Pro since your recent Yosemite update. I also apologize, I'm a bit unclear on the exact nature of the issue you are describing. If you are having intermittent but persistent responsiveness issues with your mouse or trackpad, you may want to try using Activity Monitor to see if these incidents correspond to occupied system resources, especially system memory or CPU. You may find the following article helpful:
How to use Activity Monitor - Apple Support
If the entire system hangs or locks up (for example, if the system clock freezes and stops counting up), you may also be experiencing some variety of Kernel Panic. If that is the case, you may also find this article useful:
OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem." - Apple Support
Regards,
- Brenden

Changing object name of role is not reflected

When I change the Current Object Name for a specific role this change is not reflected. The role still retains it original name in the PCD or when I assign the role to a user.
This only happens for a specific role in our system. For all other roles the change of the Object Name works fine.
What am I overlooking?

Hi ,
Please check that when you change property 'name' of the role and then click on save button you shud get a 'save successful ' kinda message.
If not then may be your role is locked by some other portal user id and thus not allowing you to change it. Please note that this will also not allow to change any property of the role, so you can test this by trying changing the other properties of the role.
If this is not the case, then compare the properties of two roles one whichis working fine and the one which is not.
Thanks,
Namrta Mahajan

Changes in server side java file not reflecting in Client side java code?

Hi friends,
iam using eclipse IDE, JBoss server, SWING GUI and Oracle DB
( looks like : SWINGGUI (Client) <--> EJB's (serverside) <---oracle )
my problem is , when i make change in server side bean file, that changes are not reflecting in GUI programs.
(for ex: iam adding settr and getter for a field and using that in GUI program. but its not identifying that setter or getter).
please tell me what should i do for every change done to server side program, that should reflect / available to GUI?

my problem is , when i make change in server side bean file, that changes are not reflecting in GUI programs.
(for ex: iam adding settr and getter for a field and using that in GUI program. but its not identifying that setter or getter).what do you mean it's not "identifying" the methods?
you have to call those methods you know
are you getting NoSuchMethodError?
please tell me what should i do for every change done to server side program, that should reflect / available to GUI?you haven't posted any code or error messages that might help us debug

Changes made in book file are not reflected in RH when book is updated

I'm using RH7 in TCS1. (I know, I know, everybody else is on RH8 in TCS2). I've added a book file by reference to my project. Then I made a few changes to titles in my FM book, then updated my project, but none of the changes have been made in RH.
Any ideas?

You're not the only one using TCS1. I, too, must endure Adobe's initial FM-RH Integration software offering with its limited patches and multiple workarounds (I don't sound bitter, do I?).
Do you have the latest patches?
When you say you modified titles in your FM book, did you modify the document titles from the book file, thereby changing the file names? Or did you change heading styles within a FM document/chapter?
If you changed the file name in any way, verify in the RH Project Manager that all links to the referenced FM files are not broken. If any file links are broken, you can resolve them in the RH Project Manager.
Changing a heading name within a FM document should not cause you this grief, as long as the file links between FM and RH remain intact.
As I don't know your level of experience, I'll make an suggestion to someone new to FM-RH integration (although, since you're using TCS1, I presume you are an experienced user). When updating the RH project, are you selecting Force Update or Update All. Force Update applies changes made in FM to your RH project. Update All only applies changes made in RH.
Also, RH has a feature that allows you to select specific topics to ignore when running a Force Update (i.e. changes in FM won't be applied to the selected topics). Make sure no topics are selected for this purpose.
If all else fails (and I don't recommend this unless you tried every other possibility), delete and re-import the book. There's another thread that helps you through this process without you having to manually reapply your settings.
Good luck!

Changes in the Custom include do not reflect in testing client

Hi All,
I have added some custom fields in Infotype 21 in the dev environment. But, the changes are not reflecting in the testing environment. Can anyone share their thoughts.
Thanks in advance,
Guru.

Hi Appana,
Yes, we can identify any screen changes from sy-datar. It is set when I make any changes in the custom screen also. But I dont want to give a pop up every time I leave the custom screen. I want to give raise a pop up for saving the delivery document just like any other SAP screen (For eg. SAP Screens do not give a pop up when we move from one screen to another screen, but it gives a pop up if we try to do a subsequent functions like picking without saving the changes in delivery).
Thanks
Anil

Changes done in eclipse editor is not reflecting in workspace file

I have changed the code in one of the jsp file through eclipse and saved it.But the change is not reflected on the workspace file.What might be the reason for this?Can anyone give the suggestion to solve this problem?
Thanks,
Ranjit

U might have assigned system editor or some external editor for jsp in ecilipse-> editor setting,
Just refresh jsp.If saved changed will get reflcted in work space.
This is ATG technical forum and wrong place to raise this question.
Thanks,
Nitin.

Changes to business rules in EAS not reflecting in planning

Hi Friends,
One of my client is facing the issue issue.Could anyone help on the issue.
When a new business rule is created or changed in EAS, the changes are not reflected in Planning. A stop and restart of the service is required to see the new business rule or a change to a calculation.
This is a consistent error we are having in development.
Thanks in advance.
Regards.

Hi,
First I would check to see if any patches relate to the issue you are having.
I would then log the issue with Oracle to see if they can help any further and it could be a bug.
It sounds like the cache may not be getting updated so planning doesn't see any changes, restarting clears the cache and objects are read directly from the database tables so you can the changes, that is just a guess though.
Cheers
John
http://john-goodwin.blogspot.com/

Disk Partition says "Locked" and will not let me unlock using the perm.

Hello,
Just a quick question here, I recently set disk permissions on one of my partitions on each mac pro, I set the permissions for all enclosed items so that it set them over the whole disk. How do I undo this? There is a lock icon on the partition and I cannot access it...thanks

Yes they are system boot partitions, I did this because last time I re-imaged the computers they had a bunch of permissions problems, I didnt realize I would not be able to use the partition if i farmed out the permissions, I checked the box that said "Ignore permissions on this volume" and it still says "Custom" for all of them and will not let me access the drive even on the Admin account. If i use the disk utility to erase and then re-image my "Manage Drive" and set it back to a boot disk do you think that would work, thanks for the replies you guys are awesome.

Paviliom dv9408nr - fastest Turion processor, and architecure/stepping code for that processor?

What's the fastest AMD Turion processor I can put in my Pavilion dv9408nr? Also, what architecture or stepping code is usable for that processor? For example, if the fastest processot is a TL-64, can I use either the .090 or the .065 architecture? I'm getting the computer BGA resoldered, so this repair will be handled by a pro. Thanks for this service.

I to have the same issue and it all started after switching photoshop cc's layout to 3d mode now everything crashes repeatedly... Thankgod AE still works but yeah ps 3d system is the culprate here b/c It worked perfectly for 4 months for me until i tried there crappy ps 3d system!

PS 2013 - Changing the formula in custom field not reflected in the report columns

Hi,
The company where I work have a Sharepoint environment / EPM 2013 with about seven hundred registered projects.
We have a customer demand where it is necessary to change the formula of one of the custom fields of the environment. This field is used in some management reports made in Reporting Services and accessed by the entire board. The report uses as a source
'MSP_EpmProject_UserView' view.
The change in formula was simple, but we found that the change will not be reflected in the reports when the user saves the project in Sharepoint or publish the schedule associated with the Project.
I believe this is the expected behavior of the EPM, but I wonder if there is some other way than through the PSI, to publish all environmental projects.
Best regards,
Armando Machado Gonçalves - Sharepoint / EPM 2013

Hello,
That is expected, it will not update until the project is open and republished. No automatic way to do this without automating project pro. Publishing all projects via the PSI wont cause the plan to recalculate, the plans will need to be opened.
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

Changes via SM30 of ztable is not reflected after saving...

Hello experts,
I am trying to modify a z table because the users told me that when they
try to modify it using its maintenance view their changes is not being saved.
Now, I checked the table and it has 3 fields(excluding MANDT) and I found out all of
them are primary keys. So my question is, what modification will I do to the table
to let users change the existing records of the ztable?
Again, thanks guys and take care!

Hi again,
1. Ya, no problem.
2. After changing the keys to non-primary,
thru se11,
and activating,
it will give warning,
3. hence, after that u will have to
do it using SE14.
4. Data will not get lost.
5. The only IMPORTANT THING
is that
the data in the primary keys
should be unique, after your changes.
regards,
amit m.

Changes done in message mapping is not reflecting in output

Hi all,
i have created one scenario XML to XML and i before i had done 1 to 1 mapping, i got the output also.
but when i changed few calculation in the message mapping
there is one node "name" and "Description" in source and target in both places.
i am having name in SOURCE XML as "something" but i want to change this name to "Xsomething" and in description i have something in source but i want to pass constant value "ZSUBHODIP".i did mapping in message mapping, and when i did the testing in message mapping then in target in message mapping
i got "XCOPC_C03" and "ZSUBHODIP" but when it takes the XML file which is in my system then in output XML name value "XCOPC_C03" and description "ZSUBHODIP" is not coming.
i activated it too.
even i tried with the same FILE to FILE scenario also but in this scenario also problem is same like one one mapping only then when i changed it in message mapping then previous output is coming.
is there server problem, if yes then how to fix it??
please tell me what to do
thanks

Hi,
can you test it like this:
/people/michal.krawczyk2/blog/2005/09/16/xi-how-to-test-your-mapping-in-real-life-scenarios
Regards,
Michal Krawczyk

Changes done in the ValueChangeListener is not reflecting else where

Abstract:
There is an input File competent where the user can select a file to upload. The user will press a Savebutton to store file in the database.
Work Flow:
When the user select the file to upload the valueChangeListener will be called.
In the valueChangeListener I am storing the file into local variable of type UplodedFile. I am able to access all file property from this variable in the valueChangeListener; that is, I can access the file name, size,... form the local variable within the valueChangeListener.
When the user press the Save button a method to commit the changes is called.
In the commit method I am getting the file data from the local variable that hold the file data.
The problem is:
This local variable that should store the file data is always NULL. I have no idea why this variable does not contain the file data although I set its value in the valueChangeListener.
Note:
I tried to bind the input File competent to a local variable and again it gave me the same result NULL value.
I am using ADF Technology JDeveloper 11.1.2.3

You have to process the data inside the value change listener as it's only present during the request. The fats ids removed after the request.
Check my blog JDev11.1.2.1.0: Handling images/files in ADF (Part 2) | JDev &amp; ADF Goodies
for a listener which processes the data directly.
Timo

Address of the user changed updated into sap but still not reflecting at

address of the user changed updated into sap but still srm shopping has the old
address .
what could be the possible reasons of this bug?

Hi
Which SRM version are you using ? We encountered the Same Issue long time back ->
Are you updating the Addresses in Web Transaction or using SAP GUI (SU01 transaction) ?
Please go through the following SAP OSS Notes below, which will definitely help ->
Note 930371 - SRM 5.0: BBPUM01 Check Data
Related Notes
Note 931556 - SRM 5.0: Hiding the BBPUM01/BBPUM02 button
Note 923461 - SRM 5.0: BBPUM01 description for position
Note 885954 - SRM-UME: User synchronization with wrong address data
Note 884067 - BPartner w/o an private address can't change their settings
Do let me know.
Regards
- Atul

Changes to published Locked Reference processor not reflected in process using that processor

Similar Messages

Maybe you are looking for