Changes to table header row that repeat in several pages

Hello.
I have a table that expands over several pages, with a header row that repeats in all of them.
I want to hide some of the header row's columns by code.
When I change the header row, it changes only for the first occurence of the header row, and not for other occurences.
I tried to do somthing like that:
for (i = 0; i < Table1.nodes.length; i++)
if (Table1.nodes.item(i).name == "HeaderRow")
// ..hide the column..
But it only entered the loop once, and only changed it for the first row.
I also tried to look at Table1.HeaderRow.instanceManager.count, but again, it has the value of 1, so I can't access
Table1.HeaderRow<i>
or somthing like that.
So how can it be done?
Best regards,
Udi Dekel.
Edited by: Udi Dekel on Jul 30, 2008 9:24 AM

Hi Rahul,<o:p></o:p>
I have tried using multiple formats of images (.jpg & .png) for the problem and have been able to successfully achieve the desired result as per design.<o:p></o:p>
To further verify the issue that is happening on your system we need to do some extensive troubleshooting to isolate the issue. This would require you to open a ticket with Microsoft.<o:p></o:p>
Following is the link along with the number for Microsoft which would help you to open a ticket with us – <o:p></o:p>
http://support.microsoft.com/OAS<o:p></o:p>
1800 MICROSOFT
Thanks & Regards,
Vinayak Shetty 

Similar Messages

  • Nested Tables - Unable to make Table Header row to repeat in subsequent pages

    Hi,
    I am unable to make the header row to repeat in subsequent pages for nested tables.
    Can anyone reply with a sample form to illustrate a similar scenario?
    Thanks,
    Rohit

    Hi All,
    I have selected the the check box Insert Header Row in Subsequent Pages then also the header is not getting flowed in subsequent pages only till 2nd page its getting flowed.
    I have used table wizard to create table and i have made the table subform as flowed then also table header is not repeating in subsequent pages.
    MainForm (Flowed)
    TableSubform1(Flowed)
    Table1
    HeaderRow
    Row1
    TableSubform2(Flowed)
    Table2
    HeaderRow
    Row1
    I selected TableSubform1 and in Pagination tab OverFlow Leader dropdown i selected HeaderRow, the same i did for TableSubform2 also but the table header is not getting repeated in subsequent pages.
    Please help me in solving this problem.
    Regards,
    Bala Baskaran.S

  • Table Header not getting repeated in subsequent pages

    Hi,
    I have a table and i want to table header to be repeated in subsequent pages but only till 2nd page the table header is repeated from the 3rd page onwards the table header is not repeated.
    I have selected the Header Row in hierarchy and in Pagination tab for the header row i have checked the the check box Insert Header Row in Subsequent Pages.
    After selecting the checkbox also table header is repeated only in 2 pages and not repeated after the second page.
    My table hierarchy in form is :
    TableSubform
    ---Table
    HeaderRow
    Row1
    I am using Designer 8.0 and Acrobat Reader 8.1.2
    Can you please help me in solving this issue.
    Regards,
    Bala Baskaran.s

    Hi All,
    I have selected the the check box Insert Header Row in Subsequent Pages then also the header is not getting flowed in subsequent pages only till 2nd page its getting flowed.
    I have used table wizard to create table and i have made the table subform as flowed then also table header is not repeating in subsequent pages.
    MainForm (Flowed)
    TableSubform1(Flowed)
    Table1
    HeaderRow
    Row1
    TableSubform2(Flowed)
    Table2
    HeaderRow
    Row1
    I selected TableSubform1 and in Pagination tab OverFlow Leader dropdown i selected HeaderRow, the same i did for TableSubform2 also but the table header is not getting repeated in subsequent pages.
    Please help me in solving this problem.
    Regards,
    Bala Baskaran.S

  • Repeating Table header rows ?

    Tables need one or more header rows that repeat when the
    table breaks across pages.
    Speaking of breaking, do not let rows break across pages
    (unless they are taller than a page). Don't make it an option; just
    never do it.
    Cheers

    Hi Richard,
    I will respond to you below!
    quote:
    Tables need one or more header rows that repeat when the
    table breaks across pages.
    This is on our list of tables enhancements for the future,
    thanks!
    quote:
    Speaking of breaking, do not let rows break across pages
    (unless they are taller than a page). Don't make it an option; just
    never do it.
    We never break table rows across pages even if it is taller
    than the page; any content that exceeds the available space on a
    page is clipped.
    Regards,
    Pete

  • Table Heading Rows

    How do I get table heading rows to repeat if a table is broken across one or more pages? I'm sure it's something simple, but I have just about driven myself insane trying to figure it out. Help, please!

    Molly,
    You might be better off asking this question in the Structured FM
    section of the forum as this is part is for unstructured FM.
    Also, your question might easily be missed when you jump in on an
    older topic such as this. Please start a new topic and also include
    other relevant information such as your version of FrameMaker
    (including point release, e.g. 8.0p277) and the structure of the table
    elements that you're using.
    Arnis Gubins
    Forum host

  • How to repeat 2 table header rows in adobe form

    Can anybody suggest me how to repeat 2 table header rows .
    one header row is for displaying only columns header list
    second header row is for displaying 'from date' and 'to date'.
    and i want this to be done using layout tab(palletes) in the form.  will it be?
    Message was edited by:
            M Madhu

    loop at ot into wa.
    at first header one
    write second header.
    endloop.
    declear one internal table append both values in come internal table .
    pass the header in comen internal table.
    Message was edited by:
            Karthikeyan Pandurangan

  • How to keep a table "header" stuck at top of each page

    Okay. This will probably be impossible to explain, but here goes.
    I have a document template that consists of a table (4 columns and variable number of rows depending on the content).
    I would like the columns to have their "headers" (meaning here the first row) appear on each page. So, as the first page gets filled up, when page 2 appears, the headers are duplicated from page one (so that the contents of the columns are evident on each page).
    Hope that makes sense. Can this be done with pages? (I can't use the regular page header for this since it's got different info that needs to be there.
    Thanks.

    I was just fooling around with a table trying to solve a different problem when I came up with a different solution to your question (assuming I understood what you wanted).
    In the Wrap Inspector choose Moves with Text and your table will continue to successive pages. (If you want to center the table, or position it anywhere other than all the way left, click on the table and grab the little triangle in the Ruler and drag it to the right to move the table.)
    If you don't already have the "Header Row" box checked, do so now. (In the Table Inspector.) Any text in the Header cells will repeat on each page just like a regular page header.
    If you don't want the default gray, highlight the Header and go to the Object Inspector and in the Fill menu select None or any color you like. You can even select each header cell separately and make each one a different color.
    Happy Paging,
    Walt

  • SSRS Table/Row Header does not repeat on every page when exported to PDF

    Hi, I have a SSRS Report in which the rows are grouped and the Tablix has a Table/Row header. I wanted the header to repeat on every page for a group because sometimes the data from the group would be more than one page.
                                   To achieve this
                                   - I went to Advance mode by clicking the arrow next to column group
                                   - Selected the Header Static column from Row Group
                                   - Changed the following properties
                                                    - KeepWithGroup: After
                                                    - RepeatOnNewPage:
    True
                                                    - The header columns
    are set to not grow.
    The problem only occurs when the nested grouped data in one of the columns goes over a page. The following pages don't have any header.
    So half of the time the header row repeats but when the nested grouped data extends over one page the header does not show. Problem only occurs when rendered to pdf.
    I found this line "Headings are repeated on each page only if there is sufficient room" in SQL 2008 version. But I could not find it in later versions of sql server. So does that mean it is fixed

    Hi Mumblesnz1,
    According to your description, you specify value of RepeatOnNewPage as True in the report. When exporting the report to PDF, one grouped data extend over one page, and tablix header display on first page, not repeat on following pages.
    As we tested in our environment(SQL Server 2008(SP3)-10.0.5520.0(X64)), it works as you required. We set KeepWithGroup as After and RepeatOnNewPage as True. After exporting to PDF, the grouped data display on two pages, and tablix header repeats on each
    page. Since we haven’t found any document mentioned this issue is fixed on which version, I suggest you try to install the service pack 3 for sql server 2008.
    If you have any question, please feel free to ask.
    Best regards,
    Qiuyun Yu

  • Table heading row does not repeat

    I'm using InDesign CS5, and have a table that splits over two pages. There is one heading row, and I've set it to repeat on each page. But it doesn't repeat. The only thing a little unusual about this table is that some of the heading row cells are rotated and some are not rotated. Has anyone encountered this and found a solution?
    (Yes, it is really a header row.)

    Works fine for me?
    What do you mean you set it to repeat?
    When you highlight the Top Row, call up the context menu (right click or CTRL Click on Mac with one button mouse) select "Convert to Header Row"
    Once it's a header row it automatically repeats when the table breaks.

  • My table header row repeats on page 2, but not thereafter -- why?

    The header row on my dynamic table will repeat when the table overflows onto the second page, but if it flows over to a third or fourth page, the header does not repeat.  Why is that?  I'll be happy to send the form with the troublesome table via email to someone who can help,
    Thanks,
    Jenny

    hi, its weird !!
    pls fwd it to [email protected]
    Abhinav

  • Issue: Saving dynamic form as reader extended (to allow saving) causes certain header rows to repeat

    I use LiveCycle to create electronic forms/worksheets for the group I support at work.  I've had two worksheets have this issue recently.  One I was able to fix by going to my previous version, re-editing, and re-saving.  The other continues to be a problem.  The worksheet is dynamic, and has several add row features.  The form continues to work fine, but the header rows in certain tables repeat when saved as a reader extended file which allows my users to save the form (required for our work).  I've completely re-done the worksheet from scratch, as well as re-editing from previous versions with no luck.  The best I can do is get repeats to change header rows.
    This is the dynamic file prior to saving as a reader extended document:
    And after:
    Any suggestions on how to fix this issue?  I can't spend hours re-creating the entire document if its just going to happen again...
    Thanks.

    The entire worksheet was created in Design View - so all the script written was done automatically by LiveCycle - The tables all exist with a single row to start, and rows have the ability to be added dynamically.  As far as the scripts referencing header rows, I do notice that the header rows in each table are all named the same ("header row") in the script - could this have caused a glitch?  In the hierarchy chart, they are separated out by a bracketed number, so it seems to realize they are separate.  But let me try renaming each one separately...
    Well that worked!  Its the first time I've been able to Extend the document without extra rows on this version of the worksheet!  So all I did for future users, was to make sure each Header Row was specifically named differently - so HeaderRow1, HeaderRow2, etc.
    Thank you so much!

  • Repeating Header Rows - Not repeating beyond page 2

    Hello,
    I'm at my wit's end and I have yet to see a response to questions related to repeating headers (though I've seen it in a few forums).
    I have a flowed form with an initial header table and then 4 subforms, each made up of tables with a header group of two rows and then a user-modified number of data rows. Each of the subforms has it's own 2 line header, which includes a static "topic" row (with "add/delete row" button) and then a second header row with the column titles (9 columns across). As I said, these two header rows are grouped together.
    Each of the 4 subforms can (and does) flow on to multiple pages once filled in by the users. At first, my issue was getting the two rows (grouped) that make up my header to repeat on subsequent pages for each subform. No go - apparently grouped header rows can't make up an overflow leader (I can only choose one of the two), and when I check the box to make the GROUP appear on subsequent pages under pagination, it will only appear on page 1 and 2 for that particular subform...so I've given up on that. Now I just want the second header row (with the column titles) to appear on every page that each subform overflows on to, but I can still only get it to appear TWICE. Anytime a subform moves onto a third page, requiring a third instance of the header, it doesn't work.
    I came across one solution involving the "repeat header for each row", but that came with a host of new bugs, including a bug where every time I open, edit data in a particular subform and save the file, a NEW header group row is added to that subform (after 12 opens, there is literally 12 header rows at the top of each of my 4 subforms if I edit data in all 4)...though it solves the other issue and the header rows DO appear properly on subsequent pages beyond page 2!!!!
    Any solutions? I've run into this on three separate occasions over the past year when building forms and every time, I've hit this wall, given up the search for a solution and sacrificed aesthetics and functionality in my forms that I shouldn't really have to.
    Ck.

    Here is a sample I did for you..
    https://acrobat.com/#d=BSeyeLhbaeyqXfwX*wrwzA
    The difference with this file, is I created a table and then in the top row I merged all cells. Then created a table with two rows inside this merged cell.
    In the Header row properties I checked, repeat header in Subsequent pages.
    Let me know if you have any issues..
    Thanks
    Srini

  • Compare tables, find rows that are "different"

    A common problem in replication/query-extract-load scenarios is comparing two sets of data, and finding the rows that have changed or are different. A clean solution to this is less obvious than it sounds, because "different" can involve nulls (love them!/hate them!).
    Consider two structurally identical tables with all data linked by a common PK:
    Snapshot A Snapshot B
    PK First Last State PK First Last State
    1 Bob Smith AZ 1 Bob Smith AZ
    2 Louise Jones FL 2 Louise Brown FL
    3 Joe Jones NULL 3 Joe Jones CA
    4 Joe NULL GA 4 Joe Celko NULL
    5 Phill NULL AL 5 Phill NULL AL
    If we are interested in tracking or processing any changes in our data, we would agree that only Rows 1 and 5 are "the same" in both sets A & B.
    Because of null logic, this sql only gets me row 2 (besides being syntactically miserable with a wide table) :
    select A.PK from A inner join B on A.PK = B.PK
    where (A.First <> B.First) OR (A.Last <> B.Last) OR (A.State <> B.State);
    So how can I select rows 2, 3, and 4? (Extra credit for for a query I can type in less than two minutes with a pair of tables that have 42 columns)
    Thanks much,
    Steve Pence
    DBA
    Wycliffe Bible Translators
    Orlando
    [email protected]

    Sorry, my post got mangled by the white space deleterer...
    A common problem in replication/query-extract-load scenarios is comparing two sets of data, and finding the rows that have changed or are different. A clean solution to this is less obvious than it sounds, because "different" can involve nulls (love them!/hate them!).
    Consider two structurally identical tables with all data linked by a common PK:
    Snapshot A
    PK First Last State
    1 Bob Smith AZ
    2 Louise Jones FL
    3 Joe Jones NULL
    4 Joe NULL GA
    5 Phill NULL AL
    Snapshot B
    PK First Last State
    1 Bob Smith AZ
    2 Louise Brown FL
    3 Joe Jones CA
    4 Joe Celko NULL
    5 Phill NULL AL
    If we are interested in tracking or processing any changes in our data, we would agree that only Rows 1 and 5 are "the same" in both sets A & B.
    Because of null logic, this sql only gets me row 2 (besides being syntactically miserable with a wide table) :
    select A.PK from A inner join B on A.PK = B.PK
    where (A.First <> B.First) OR (A.Last <> B.Last) OR (A.State <> B.State);
    So how can I select rows 2, 3, and 4? (Extra credit for a query I can type in less than two minutes with a pair of tables that have 42 columns)
    Thanks much,
    Steve Pence
    DBA
    Wycliffe Bible Translators
    Orlando
    [email protected]

  • How to get header row to flow to next page with table content?

    I am setting up a dynamic form with a series of question/answer tables. 
    Example: 
    Header (Text):  List your accomplishments for the year. 
    Row 1 (Text Field):  Associate types their response to the question above.
    If I type enough text in the response that it flows down to a second page, both the header AND the response box drop down to the second page....ultimately leaving a big white space on Page 1.  I would like for the header to flow to the next page, but only with the 'extra' text that didn't fit on page 1...not ALL of the text.
    Is this possible? 

    I am doing exactly that. My issues is that, VO attribute is passed correct for the table rows which are fetched from the database. For the table rows which got created through 'Add Another button', the VO attribute passed through URI as {@FdTaskId} is returning null. The VO attribute sets only when a form submit happens. For example, after adding a row through 'Add another row' button, click the same button again to add one more row and now go back to previously added row and now you can see that its VO attribute is set ({@FdTaskId} carries value )

  • Table header row to show only on even pages

    Within a table I have made few of the rows as header row. Is there any way I can make this header row to show only on even pages..I tried doing this at the beginning of each header row <?if:(fo:page-number) mod 2=0?>..but its' not showing me anything..

    Thanks that helped..But I am having another problem. I want to call different templates in the even header section... based on the page number...for example..for
    page 2 of 2, I want to call template1 in the even page,
    page 2 of X, I want to call templete2 in the even page,
    Can you please help..?

Maybe you are looking for

  • External drive - disk utility won't display long - can't repair

    Long time mac user --- this one has me stumped. I have an external disk that I'm using for time machine. USB3. Sometimes I'm in a hurry and I don't disconnect it properly. Looks like that's messed up the drive - I get "disk not ejected properly" now.

  • Billing due date change

    I would like to know why my billing due date is being changed. I have been a long standing customer of AT&T back even when it was Cingular. I do not want my billing date changed at all. I have electric and car payment due at the middle of the month.

  • Customer is also vendor

    hi,     in this case i would like to clear partially how can i clear pls guide me. thank u, swathi

  • Script for getting all windows Drives freespace information

    Hi All, Any can post the batch script to get the disk drives freespace info for multiple servers. Cheers, Govind

  • Premiere will not export Uncompressed or DV compressed video files

    Working with CS4 with all current updates... I have no issue exporting any other format (that I know of) including flv and wmv and m2v. I am using PCs with Windows 7 Pro 64bit on a Desktop with  8GB RAM and Windows 7 Home Premium 64bit on a Laptop wi