Changes to tables not being picked up by certain Headstart Utilities

I modified an existing table in our repository by adding a new column to the table. This column has the same properties as another column in the table. The Headstart utility 'Maintain Default Events For Entities' had been run for all tables before the new column was added. As expected, all the columns in the table had UPDATE events created for them, except of course the new column.
As none of the events associated with this table had been used, I ran the 'Cleanup Unused Event for Entities' utility for the table and then re-ran the 'Maintain Default Events For Entities' utility for the table, in order to create an UPDATE event on the new column. This however, was not the case as an UPDATE event was not created for the new column. It appears to have been completely ignored.
I have checked for the obvious i.e. was the table change applied properly in the repository and had the database been properly re-generated from the server model and everything appears to be correct.
I have noticed that certain Headstart utilities, 'Enforce CDM Ordering Standard for columns' and 'Set column display length' do pick up the new columns. 'Enforce CDM Ordering Standard For Attributes' however, is another utility that does not pick up the new column.
Any solutions and explanations for the above would be much appreciated.
Thank You,
Aneesha.
null

Aneesha,
In your formulation of the problem, you seem to sometimes be using the terms "table" and "column" when you actually mean "entity" and "attribute". This makes it a bit hard for me to reconstruct your steps. Did you create both a new attribute on the entity, and a new column on the table, and are the two linked together (i.e. if you go to the attribute, is the "Implemented by Columns" node filled correctly?
Kind regards,
Peter
null

Similar Messages

  • Item in sales order not being picked into picking list

    Hi Gurus,
    Could you please tell me the possible reasons as why an item in the sales order which has enough stock not being picked into the picking list?
    Many Thanks
    Choudry

    Hi
    Delivery creation that is selection date is controlled by the schedule line of the line item in the sales order
    Try by changing the schedule lines in sales order in VA02
    there you try to change the delivery date to past
    It might be possible if you had enough stocks at that time
    Regards
    Raja

  • Delivery quantity changed while delivery was being picked .

    Hi Friends .
    I have  a big problem, because the delivery quantity changes while the delivery was being picked.
    This is the positively the 3rd time that we have seen this, possibly the 4th, recently.
    Delivery was created this morning for 800pc. Batch determination was telling the picker to pick from perticular storage location SLOC 112. (all 800pc) (25pc =1 pallet)
    The picker knew that he was picking 32 pallets from that row.
    After he picked 32 pallets, the system was telling him that he needed to pick 2 more pallets.
    At that point, I  saw delivery .The quantity in the delivery had, at this point, increased to 850.
    Delivery shows that 32 pallets that had been picked up to this point.
    again  it is calling to pick 2 more pallets.
    at this point of time  delivery is for 850 (not the original 800)
    I have not changed the quantity in delivery or in order . how come delivery quantity has changed while materials are being picked .
    Kindly I request your speedy reply as it's priority ticket .
    Thanks in advance .
    Jayapala S.h

    Hi jayapala
    The delivery qty can change while you pick the quantity  if the stock is less than the stock that is to be actually you are going to deliver. As the stock is changing , check the stock in MMBE for that material.
    Example :
    Say you have created a sales order for 100pcs but when you are doing delivery material is taking only 75pcs because there are only  75pcs of stock in the storage location
    Regards
    Srinath

  • In Production Order Old Raw Material Batch No. not being picked (FIFO)

    Hi,
    We have activated Batch Management for ROH type of Materials with Split Valuation and the Strategy applied is FIFO.
    We have generated many such batches and consumed too, but lately out of many ROH mateials, 2 ROH who have Old Batches are not being picked and the Batch which is recently created is being picked at the time of Production Order Release.
    We have not done any changes into the Master Data nor the config during this period.
    Can anyone help what can be the issue ?
    Thanks in advance,
    Harris Panchal

    Hi,
    Actually our requirement is that we want to sort out the Batch as per the Earliest one and consume the earliest first, i.e. FIFO strategy.
    For that the MM Consultant has configured the following Charac:
    1. Stock Determination: Priority
    2. Value Assignment Type
    3. Batch Number
    Which I am feeling should be changed and to be as per the following:
    1. Created On
    2. Batch Number
    In OMCV, Classification is active with following option:
    4     Classification in foreground for new batches only for the following movements: 101, 309, 310, 561
    3     Classification always in foreground (all batches)   for the following movements: 321, 501
    Requesting your valuable inputs,
    Thanks and regards,
    Harris

  • What's the error?  Longtime site not being picked up by Google

    This site has been up for a year and is not being picked up by Google. What is the problem?
    Any suggestions much appreciated.
    www.elspethcameron.com

    +(sorry for my english, it usually is better than that I think/hope)+
    Ok... Let's see...
    www.elspethcameron.ca is just a forwarding url with cloaking (masking, masking the real url) enabled so it's not dynamic it doesn't change when visiting different pages. It is listed in google
    http://www.google.ch/search?hl=en&q=site%3Awww.elspethcameron.ca&btnG=Search&met a=
    but there is no content under this url because it is just forwarding visitors to the real website, just like a link would do that.
    The real website is, at least partially, on google with its content as you can see here
    http://www.google.ch/search?hl=en&q=site%3Aweb.mac.com%2Felspethcameron%2F&btnG= Search&meta=
    The other parts of the website are not indexed by google. I think that is because google is not able to crawl the nav bar because it is javascript rendering. You could make a second nav bar by your own and put it on the bottom of the page. Simply add a text field and put normal links in it to the other websites. Google will then follow them next time indexing your page.
    In addition to that you should watch the thread I posted before. Note that by making your sitemap you don't use www.elspethcameron.ca but the real url.
    Regards,
    Cédric

  • Delivery document not being picked while creating shipment document

    Dear All,
    Issue is regarding creation of shipment document.
    As i am creating shipment document in VT01N, am unable to get the delivery doc . ie., delivery document is not picked in shipment creation.
    I have created a sales order, picking is completed n saved, PGI not yet been done.
    Am unable to create a shipment document due to delivery document not being picked.
    i/p's will be of great help.
    with regards,
    Vijayashree

    Dear all,
    The issue is solved.
    As the Route was not picking in Sales Order so the delivery was not picked in shipment creation.
    Route determination setting was not correct.
    Regards,
    Vijayashree

  • File not being picked by adapter

    My Source file name is xml_a1_en.xml
    the test files are of name xml_a1_02_en_2010.xml , xml_a1_03_en_2010.xml
    the files are not being picked up by adapter..Is the naming convention wrong for the test files or any reason?

    Hi Mr.King,
    I am assuming your OS is Unix system right?
    If yes -> check the file permission?
    if Only Reading: permission should be 664
    Move the file after reading: 775
    Regards,
    Senthilprakash

  • Large files not being picked by FTP adapter

    Hello,
    In our integration scenario, files from the AS400 (legacy system) are placed at a FTP location from where the XI picks up the file for processing. We have FTP communication channel.
    The file has about 8000 records is in binary format. When the file was placed it was not being picked up after the mentioned polling period of 60 secs. After manually inserting about 300 records which makes the file size smaller, the file is picked up bu XI and processed without error. With the 8000 records the file size was 2.5 MB.
    Thank you

    Please provide a J2EE trace at logging severity "Debug" for the location
    "com.sap.aii.adapter.file". Please do the following:
    - increase logging severity to "Debug"
    - set log levels to ERROR for all components
    - ONLY set log level to DEBUG for "com.sap.aii.adapter.file"
    - reproduce the problem and gather the defaultTrace.trc immediately
      after you reproduce
    - remember to reset the logging severity after you have reproduced as
      leaving it on "Debug" can cause performance problems in your system.
    Also the ftp server logs will be needed in this case.

  • Agreements Not Being Picked For SFTP Protocol in Oracle 11G

    Hi Anuj ,
    PFB the Details of the Issue :
    Agreements are not being picked for SFTP protocol even though From TP , To TP , Document Type and Revision are picked correctly .
    We are running on MLR11 , Version : 11.1.1.4.0 . Also we have set b2b.useCPAid to false in EM Properties so that Agreement is picked based on DocType Name , Revision and Partner Id's .
    Also when we used File Protocol its working Fine . The problem exists for SFTP Protocol .
    Error Code : B2B-50547
    Error Description     Machine Info: (gwl09072appg084) Description: Agreement not found for trading partners: FromTP TestEbxml, ToTP BTGS with document type rqRequestServiceRequest-1.0-INBOUND.
    Patch Level : 14114625
    Regards,
    Rohith

    Hi Anuj ,
    Thanks for the reply .
    Yes we are setting the Filename Format explicitly in the LC . As far as we have understood , naming convention FromTP_MSGID.xml
    is used to identify the TP and also MSGID is used to avoid duplicates and identification xpath is set to identify the Action .
    When we are using %FROM_PARTY%_%TO_PARTY%_%DOCTYPE_NAME%_%DOCTYPE_REVISION%_%TIMESTAMP%.xml , All parameters are identified as expected and Agreements are also being picked when we are using File Protocol . Only when we are trying with SFTP Prtocol , even though all values are being picked correctly , only agreement is not being picked . Could you please help ?
    Regards,
    Rohith

  • TS1363 My new IPod is not being picked up by my computer.  What should I do?

    My new IPOD is not being picked up by my computer.  What should I do?

    @vic_suav, thanks for the additional information. Could you please try to see if this does the trick?
    Quit iTunes on your PC, switch your iPhone on and make sure it's not locked, before connecting it to your computer. Then wait a minute or two until the "Download Photos" dialogue box pops up. When that happens, launch iTunes and wait a minute or two until iPhone shows up as a connected device.
    If the above doesn't work, follow the steps in 'How to restart the Apple Mobile Device Service (AMDS) on Windows' to restart the Apple Mobile Device Service, here: http://support.apple.com/kb/TS1567
    Otherwise, please try a different USB port on your PC. Then in your Windows 7, click Start and choose Control Panel. Click "Uninstall a program". Then verify that Apple Mobile Device Support is visible in the list of currently installed programs. If Apple Mobile Device Support is not listed, remove iTunes, QuickTime, Apple Software Update, Apple Application Support, and then reinstall iTunes. For removing and reinstalling iTunes, QuickTime, and other software components for Windows Windows 7, follow these steps: http://support.apple.com/kb/HT1923
    if all of the above fail, you can try some of the troubleshooting steps outlined in 'iOS Device not recognized in iTunes for Windows' article: http://support.apple.com/kb/TS1538
    Let me know how it goes. Good luck!

  • Forms Bean changes not being picked up from updated jar

    I've got an existing, working Bean with a single static method which my forms use to check the last modified date on a file. I've been trying to add a second method, with no luck. In an attempt to see if my new jar was being picked up, I changed the existing method to simply return "testChange". When it continued to return the string representation of the file modification date, I assumed my jar change wasn't being read.
    However, I eventually tried creating my new method in a separate class, this time not extending VBean, and include it in the same jar. I can now execute my new method just fine.
    My questions are
    1) Why didn't adding the new method to the existing class work?
    2) Given that I can demonstrate my changed jar is being used by the form, how on earth is the old method still returning the file date, when the code doesn't do that anymore???
    I've got it working, but I'd really like to understand why my previous attempts failed.
    Original class:
    public class myClass extends VBean
         public static String getLastModified(String filename)
              File file = new File(filename);
              return Long.toString(file.lastModified());
    Forms invocation:
    FUNCTION get_last_modified_date (file_name_in IN SWtype.SW_long_string)
    RETURN DATE
    AS
    v_last_modified SWtype.sw_long_string;
    BEGIN
    v_last_modified :=
    fbean.invoke_char ('SW_WEBUTIL_BLK.SWFILEUTILS'
    ,1
    ,'getLastModified'
    ,file_name_in
    return TO_DATE ('01/01/1970 00:00:00', 'DD/MM/YYYY HH24:MI:SS')
    + v_last_modified/(86400 * 1000);
    END;
    Method changed for testing:
    public class myClass extends VBean
         public static String getLastModified(String filename)
              return "testChange";
    New method:
    public static boolean isValidUTF8(String filename) throws FileNotFoundException,
    IOException
    <if not valid UTF8>
    return false;
    return true;
    Invoking the new method when it was in the bean (just returned null):
    v_result := fbean.invoke_bool('SW_WEBUTIL_BLK.SWFILEUTILS'
    ,1
    ,'isValidUTF8'
    ,:my_blk.file_name
    Invoking the imported Java method now that it's in its own class:
    v_result := myfilevalidator.isValidUTF8(:upload_blk.source_file);
    In case it's relevant, I'm using JDeveloper 10.1.3 and Forms Builder 10.1.2.0.2, running the forms locally on my OC4J instance.

    Why didn't adding the new method to the existing class work?
    2) Given that I can demonstrate my changed jar is being used by the formBoth statements point to the direction that the "old" class is still there, but maybe in a different jar-file. java takes the first occurence of a class, so maybe for the "old" class it finds it in a different jar, but the "new" class is not found in that jar and therefore taken from the actual jar. check The archive or archive_jini-tag and remove all unused or redundant jars. You maj also try to clear the jar-cache.

  • Check box in a table not being read on auto read by JAWS(Screen Reader)

    Hi Experts,
    I am working on Accessible pages in ADF. Check box in table is not being read on "Auto Read" function by jaws. Auto read is a function that allows the user to start the screen reader at the top of the page and read the entire thing that is provided by JAWS. I have even specified label property for af:selectBooleanCheckbox. Can anyone help me regarding this issue.
    Regards,
    Santosh.
    Edited by: 930871 on Jun 13, 2012 6:54 AM
    Edited by: 930871 on Jun 13, 2012 7:25 AM

    Can anyone help me on this issue. This is really urgent.

  • Changes in itunes not being changed on my iphone4s

    Changes made on the iphone control feature in itunes, say add a song to a playlist or add an artist, are not being changed on the phone. Any ideas? thanks.

    Hello there, imasummergirl.
    Great job, troubleshooting your issue so far. You may want to try manually updating your iTunes Match using the steps found in this article to see if that helps correct your issue:
    How to troubleshoot iTunes Match - Apple Support
    Make sure you have the latest version of iTunes. You can download the latest version for free.
    Launch iTunes on your computer.
    From the iTunes menu, choose Advanced > Get Album Artwork.
    Once iTunes has completed processing the album artwork, you'll need to update iTunes Match.
    From the iTunes menu, choose Store > Update iTunes Match.
    In your instance you can skip steps 3 & 4, as your issue doesn't involve Album Artwork.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • InDesign CS3 5.0.4 Changes to documents not being registered properly

    My boss has been complaining about a lot of "mistakes" lately and changes not being made, which is odd because I don't generally make a lot of mistakes. So I started paying very close attention and this is what I have discovered:
    Sometimes changes that I make to a document will randomly revert. Sometimes changes don't get saved. The problem is random and not reproducible.
    For example: I made a change to an item, and then copied and pasted that item onto another page. The change "sticks" in the new location of the item, but the original somehow, at some random future point, reverts to the pre-change state.
    Another example: I moved an item on a page, then saved, then printed, then closed the document. In that order. The printout shows the change. When I opened the document again, the item I moved was back where it was before I moved it.
    I am not having this problem in any other application. Just InDesign. Can anyone help me? I don't know what to do, but if it keeps happening, it could get me fired.
    My computer is a Mac Pro 2.8GHz Quadcore. OS is 10.5.6.
    I have, of course, already tried repairing permissions. Thanks for your help.

    Hello Michael,
    I just posted the exact problem to a new forum today ...changes revert... Have you had any problems since the preferences were trashed...? Do you think the Save As technique will work alone without the trashing of the preferences?
    Well, you do have some company in your misery...
    as if that is any consolation for being fired. . .
    We hope it hasn't grown to that extent.
    We do a quarterly magazine (Veritas) ... and this problem has plagues us since we've moved to CS3 years ago and just thought it was operator error. Until we started noticing much of the same proofreading errors version after version.
    Let me know how you're progressing, and we'll report back about how we move along as well.
    Until that time ... Earl J.
    USASOC History Office
    Fort Bragg, North Carolina

  • PQH TABLES NOT BEING POPULATED BY EMPLOYEE SELF SERVICE

    For reporting purposes I need to create different reports listing all the transactions that are coming from Employee Self S
    ervice. As workforce tables are purged (i.g. wf_items) I need to create it using
    the pqh tables (i.g. pqh_ss_transaction_history) but unfortunately they are not
    being populated. Is there any audit configuration in order to save ESS transact
    ions in the PQH schema? Or are there any other tables where these transactions a
    re always saved?
    Thank you
    Facundo

    I think the PQH History tables are only populated when there have been approvals.
    To report on the SSHR transactions, you ay need to increase the time limit before they are purged and extract them to another table(s) fro reporting.
    Regards
    Tim

Maybe you are looking for