Changes to text procedures

We have created our own text procedure(Z1) for sales documents in VOTXN which contained a number of text types.
Then tried to remove some of the text types but keeping the same text procedure id
What I found was that even though the text types no longer exist when you check the sales document you still see an entry for the deleted text type with out any description.
I can only assume that the even though the text types have been deleted they still exists somewhere against the text procedure Z1
Has anyone come across this issue before.

Can you try in VOTXN (in all systems - development, test and production system), select the text determination, then go to menu Texts ->Generate access and then check again? If this does not help, then check OSS Note 1117467 - Text Customizing change not transferred in target system II would help or not.
Regards,
Edited by: Shiva Ram on Jan 6, 2012 10:37 AM

Similar Messages

Change the Text for a Perspective in Balance Scorecard

I am trying to change "Short Text" and "Long Text" for an existing perspective in our Strategy Management system [SEM-BW 6.0 and BI 7.0]. I get the following error "Invalid call sequence for interfaces when recording changes". I have looked up OSS and found 533611 to be relevant, but it is for SEM-BW 3.1B and we are on 6.0. Does anyone else have this problem?
Detailed "Long Text" for the error:
Message no. TK425
Diagnosis
The function you selected uses interfaces to record changes made to your objects in requests and tasks.
Before you save the changes, a check needs to be carried out to establish whether the objects may be changed. This check must be performed before you begin to make changes.
System Response
The function terminates.
Procedure
The function you have used must correct the two Transport Organizer interfaces required. Contact your system administrator.

Hello Arun,
U could do the translation in Tcode Se63.
U follow the procedure
Translation >Shorttext>Screen Painter--> Screen Painter Text.
There u will see the all the text use for that transaction.
You can make the traslation there.
If useful reward.
Vasanth

How to change the text in the legend of a graph programmatically in labview

I have many graphs in one plot and want to show the legend the name of the graph (i.e. the filename). How do I change the text in the legend programmatically?

Create a property node for your graph. Use the property node "Active Plot" to define which plot (or line) you want to rename. Then write the new legend label to the property node "Plot.Name". See attached.
Tim
Attachments:
legend.vi ‏12 KB

How do I change the text on a label for a SAP delivered WD view

Hi,
I need to change the text that is being displayed for a label in a SAP delivered WD ABAP View. When I look at the properties for this label, the Text property is currently empty, so I assume that the text that is being displayed in the view is coming from the dictionary. I was hoping to change the text of the label via the Enhancement Framework. I created an OTR entry, then went into SE80 for the WD Component, I navigated to the view in question, I pressed the Enhance button and entered $OTR:<package>/<alias name> in the text property for the label. Finally I saved and activated and was prompted to create an Enhancement Implementation, which I did and I selected it. Everything seems to be fine (no errors or warnings). I then ran the WD application. My change was not there. I then went back into SE80 for the WD Component that I created the enhancement. I navigated to the View and looked in the text property of the label and saw that my change was not there. I repeated this process several times and each time when I added the OTR entry to the text property of the label, it saves and activates without issue (in enhancement mode), but when I run the WD App the change does not show up and when I go back to the WD View, my change to the text property is gone. I know that if I really wanted to I could register the object and add the OTR entry to the text attribute of the label, but I am trying to perform this change using a modification free enhancement. Can this be done via an Enhancement, or do I have to register the object and make my change using a modification?

Hi Gregg,
excellent question. I had the same problem as well before.
What I have learned is that you cannot change a UI Element via Enhancements.
You can add new UI Elements (e.g. new label) or remove existing elements, but you cannot change them (except the layout properties (e.g. colspan) maybe).
The only possibilities I see is
1. Remove the existing label, and add a new label with your desired text
2. Do it as a modification
3. Do it as a configuration (This means you go to the webdynpro application in SE80, right click and select "Create/Change Configuration)
4. Do it as customizing (This means you add the URL parameter sap-config-mode=X to the URL, navigate to the label, right click on it, and select "Change Settings for Current Configuration").
The disadvatages of 3) and 4) are
- texts in configurations and customizing are not translatable (as far as I know)
- if you have multiple configurations, you have to change the label multiple times
Hope this helps a bit,
Daniel

How do I change the text color of footers on select pages? (InDesign CS6)

Good afternoon,
Months ago, I worked with a graphic designer to put together a 100-page workbook for my training company. He turned all of the files over to me and I'd like to make a small change before we print another run for a new client. Specifically, I'm having trouble changing the text color on select pages. Since a picture says 1,000 words, let me give you an example:
As you can see, the copyright information on the right side of the page is difficult to read here when placed over the photo (you may have to look closely, but it's along the guy's sleeve). What I'd love to do is change that part of the footer (not the left, page number side) to white text. This would make it quite a bit easier to read. There's a number of other pages in the book that I want to make this change to. I'm not sure why I never noticed it or mentioned it to the designer. I suppose I've become more discerning since then.
Let me tell you what I've tried to do:
I learned how to override master pages by CTRL+SHIFT clicking on the footer. However, this has not worked for me. It allows me to change the page number part, but not the copyright side. Additionally, sometimes when I override the master the formatting of the footer goes goofy. For instance, the left side and right side come together and end up in the middle of the page I'm working on.
I'm looking for a quick way to go through and make the footers easier to read on pages where they are backed by a photo. Hoping you can help me. Please let me know if you need any other information.
Best,
Taylor

I think you should have left it as it was. It seems like what you had was single pages flowing as spreads within InDesign. Like below. That is the correct way, and when you changed it to all single, it did create your footer problems.
Will you be sending the file as a PDF to your online printer? If so, then leaving the InDesign file set as below is fine. The PDF output will separate the pages.
All you have to do is make sure that Pages, not Spreads, is chosen when you output the PDF

Unable to change group text name or add person to some group texts in iOS 8

I really like the ability to change group text names as it helps me separate work group texts from personal especially when I have coworkers that have separate business phones. I'm unable to change the name of some group texts as the option is not there when I go into details. I'm also unable to add contact to the same group texts that I'm unable to change the name on. Is this a glitch or am I missing something?

Hi CaliWingsFan,
If you are having issues with renaming and adding users to group texts, you may want to try some things to troubleshoot.
First, quit all running applications and test again -
iOS: Force an app to close
Next, I would try restarting the iPhone -
Turn your iOS device off and on (restart) and reset
If the issue is still present, you may want to restore the iPhone as a new device -
iOS: How to back up your data and set up your device as a new device
Thanks for using Apple Support Communities.
Best,
Brett L

Change my text tone for a palm treo pro

Is there a way to change the texting rington on the Palm Treo Pro to something other than the few items they allow you to choose from.
I want to set Alarm4 as my text alert and it only gives me a few. Alarm4 is allowed in a few other notification options, but not on the text message one. Can I move a default alarm for one time to another item?
Post relates to: Treo Pro T850 (Sprint)

gijenjen wrote:
Is there a way to change the texting rington on the Palm Treo Pro to something other than the few items they allow you to choose from.
I want to set Alarm4 as my text alert and it only gives me a few. Alarm4 is allowed in a few other notification options, but not on the text message one. Can I move a default alarm for one time to another item?
I have the 800w, but it's the same version of Windows Mobile, so I think the following might apply to your phone, too.
Alarm4 is a .wma-format file, while the old-style alerts are MIDI format file. I don't know why, but some of the notification drop-downs list both, and some list just MIDI files. But they all list some ring tones that I downloaded from Microsoft. Hmmm...
In File Explorer, my downloaded ring tones are in My Device\Application Data\Sounds. So if you were able to copy Alarm4 into that folder, you might be able to assign it to any notification.
I can't see any way to copy files in File Explorer. You might need to do it through ActiveSync or a third party file manager.
If you experiment with this, let us know how it goes.

I've been texting my friend with iMessage with wifi on and all of a sudden it changed to text message and won't let me send messages. My wifi is still on and working but it won't switch back to iMessage. Please help

I've been texting my friend with iMessage with wifi on and all of a sudden it changed to text message and won't let me send messages. My wifi is still on and working but it won't switch back to iMessage. Please help

What I recommend you try doing first is to turn iMessage off then back on. If that doesn't work, make sure that your Apple ID and password are correct. If everything seems correct and you still can't send out messages using iMessage instead of text message, I think you should either try calling AppleCare at 1-800-MY-IPHONE (1-800-694-7466) and/or scheduling an appointment at the Genius Bar at an Apple Store (that is, if there's one close to you).
Hope this helps!

How to change default texts in OSX dialogue windows?

I'd like to change some of the texts that appear in the OSX dialogue boxes.
One example: I have set my Mac up to ask for the password after N minutes of sleep. I would like to change the text in the box/window that appears when the Mac is woken up and where you are told to submit your ID and password (I'm sorry that I am not sure what exactly it says in English because I'm using another language).
The closest thing to what I need I have come across is this:
sudo defaults write /Library/Preferences/com.apple.loginwindow LoginwindowText 'Hands off'
However, this applies only to the first login window you see after you have started the computer. I'd like to change other default texts as well.
The default texts in different languages must be stored somewhere. How do I find them and how do I chage them? Any advice would be appreciated.

It seems like the same problem as would be faced by someone localizing the OS, so perhaps there would be something useful here:
http://developer.apple.com/internationalization/

How can i access and change a text from a button in diferents symbols!?

I have this: ELEMENTS: Stage - symbol_1
- symbol_2
So,... i would like to change a text inside symbol_2 from a button on symbol_1, using sym.$("Text").html("NewText"); What's the correct path!?
Thanks in advance,
Regards,

sym.$('symbol_2')
sym.getComposition().getStage(). getSymbol('symbol_1').$("Text").html("NewText");

How to change Alt text for the Popup Key LOV Image in Apex 3.2.1.00.10

we are using Application Express version is 3.2.1.00.10
There is an icon to click on to popup the lov search box, the alt text for that image is currently "popup Lov"
would it be possible to change the text to something more meaningfull e.g. "Lookup Person name" or "search Directory for Person names" .
I have tried by updaing them
from
Shared Components>Templates> Popup List of Values Template > Popup Icon Attr --> width="13" height="13" alt="Popup Lov"
(under Popup List of Values)
to
alt="#CURRENT_ITEM_NAME#"
it didn't work.
your respone will help getting accessability sign off

Venu,
Try adding title = "Lookup Person name" to the Image Attributes of your icon or button.
Jeff

Is there a way of just changing the text to the main menu..but not the submenus?

Is there a way of just changing the text to the main
menu..but not the submenus?
Also i have looked at in the browser and when i glide over
the menu catergories or click on them they dont show the
submenu...what can i do to solve this?

Does the example described at
http://labs.adobe.com/technologies/spry/articles/menu_bar/index.html
work for you?
What are you doing that's different from the example?
When you say you just want to change the text of the main
menu without changing the submenus, do you mean you want to do so
dynamically, at some later stage after the page has loaded?
If so, you could try retrieving the main menu elements you
want to update from the DOM and updating them from your script's
event handler for whatever event it is that you want to update them
in response to. This presumes the widget will detect this and
update appropriately, which I can't say for sure since I haven't
actually tried it.
Hope that helps!
Rob

How to change a text in an icon prorgrammatically

Hi,
I've got some VIs that have a text in common in their icons but I would like to change that text because I'm going to use that VIs in another part of the project. So, how can I change that text programmatically in all VIs that are in the same directory?.
I know it's possible because in the GOOP Developer program they do.
Thanks,
Javier de Pablos

Hi noxus,
You are right. It's very important to post the solutionts in order to other people with the same problem can resolve it without to put in contact with me.
Sorry, but I'm quite busy with I project I must to have finished in September and it was easier not to post the links. Sorry, again.
Here you've got the links to the topics of the forums.
http://forums.lavag.org/index.php?s=6ab0491a70f27fcb48d6f5f3450a4ca6&showtopic=3533
http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=E32C7C8D50B94F76E034080020E74861&p_...
http://forums.openg.org/viewtopic.php?t=37&highlight=icon+editor
If anybody has any problem say me
Javier de Pablos

How to change the text in a browser title bar?

I'm new at flash and I'm finding most things obvious, but
this is one I just can't figure out!
How the dickens do you change the text that shows in, say, an
Internet Explorer window?
Is it by filename? Mine, the index page, currently shows as
the exciting and unprofessional "index"
I've taken over the work from someone else who I'm not able
to contact (I know, that NEVER happens /sarcasm) so I'd appreciate
any help I can get.
Thanks.
Nick

andsoitgoes,
> When publishing the flash file, there is an option to
export
> the HTML document along with the flash file.
Yes.
> I see no way to edit the HTML itself. How can I edit the
> HTML template that's published?
Depending on where you specify that file's location (which
you can also
set for the SWF itself), you navigate to that folder, then
edit the
resultant HTML file in whatever text editor you please, from
Notepad/TextMate to Dreamweaver.
If you're asking how to edit the template Flash uses to
generate this
file, you can find that (at least, on Windows) at this
location:
C:\Program Files\Adobe\Adobe Flash CS4\en\First Run\HTML\
Be warned, however, that these template files, though
HTML-based, are
heavily programmed with JavaScript and a number of custom
tokens that get
populated by Flash when it goes through the publish process.
For example,
in the Default.htmll file inside this folder, you'll see a
<title> tag whose
content reads "$TI" (without quotes). Think of that as a
varible. That
gets populated with the the name you've given the FLA file,
simply because
$TI arbitrarily refers to the file name in this scenario. You
can change
this if you like, but if you do, make sure to safe it as a
new file (or at
least back up the original templates that ship with Flash).
> Does that make a bit more sense? :)
Only if I've properly understood your question! If I still
haven't,
please try again. :)
David Stiller
Adobe Community Expert
Dev blog,
http://www.quip.net/blog/
"Luck is the residue of good design."

How to change the text in Logon Page in NWDS7.3/EP7.3

Hello Experts,
I am using NWDS7.3, & there is a requirement to change the text "User authentication failed " to some custom text. The message generally comes when you use wrong used id and password while logging portal url.
I have downloaded the WAR file and extracted the Jar file(tcsecumelogonui_core.jar) to change the text under logonLabels.properties file but i can't see the key with respect to the message "User authentication failed". I cannot find the message in the .properties file.
Can any one please help me to fix the issue.Any help will be rewared with points.
-Regards
Alok

Dear Detlev,
Thanks a lot for your valuable answer. I have found the text for the "User Authentication Failed" , done the changes and depoyed the Jar file . This is working.
But the same when i try to do for "Authentication failed. Password locked" this message comes when i do multiple failed login. I need to change the text , i found the text in the u2022sap.comtcjesecurityimpl.jar file, i made the changes in the JAR file ,replaced with the server jar file and restared.
But the changes did'nt get reflected. Can you please suggest if i am chaning in the correct JAR file?. I am working in NWDS7.3
Can you please help me on this. Appreciate your help .
-Regards,
Alok

Changes to text procedures

Similar Messages

Maybe you are looking for