Changes to Verizon email servers and Non-SSL capable email clients

Need to change over my pop/smtp settings to the new settings as per Verizon notification.  I have quite a few non-SSL capable email clients.  Does Verizon provide a non-SSL email server on port other than 25 I can use ?

blottje wrote:
Need to change over my pop/smtp settings to the new settings as per Verizon notification.  I have quite a few non-SSL capable email clients.  Does Verizon provide a non-SSL email server on port other than 25 I can use ?
Not once they turn off the old incoming/outgoing servers. (Supposedly coming in September.)
What email clients are you using that don't allow for SSL???
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

Similar Messages

  • Mixing ssl and non ssl jsp pages.

    Hi,
    I am new to Weblogic 8.1 and I would like to learn how to setup few jsp pages in https:// and few pages to be served in http:// protocol.
    I have created a managed server using 7004 for http and 7040 for https. Currently I have 2 jsp pages index.jsp and test.jsp and both the pages can be accessed using http:// or https://
    I wanted to make test.jsp work only with https:// and not work with http:// How do I configure this?
    In realtime webapplications. How is switching of http and https working? Are the URL's hard coded in the controller servlet?
    Some tips would be helpful.
    Uma

    Hi,
    To do this task do the following,
    1. Create a property file in your application. for example let us take myapp.properties
    2. include the following to the myapp.properties file
    #sslport=7002
    #nonsslport=7001
    #serverip=127.0.0.1
    #ctpath=myApp
    # In your case
    sslport=7004
    nonsslport=7040
    serverip=127.0.0.1
    # ctpath is the web deployment directory
    ctpath=yourapp
    3. Create a class to read the property file say PropertyReader.java and implement the following
    String sslport=Properties.getProperty("sslport");
    String nonssl=Properties.getProperty("nonsslport);
    String serverip=Properties.getProperty("serverip);
    String cpath=Properties.getProperty("ctpath");
    4. initialise the propertyReader class and
    in the property class keep following variables in admin session data
    String sslpath="https://"+serverip+":"+sslport+"/"+cpath
    String nonsslpath="http://"+serverip+":"+nonsslport+"/"+cpath
    5. use these variables for ssl or nonssl
    response.senRedirect(sslpath+"/bank.jsp"); //for ssl
    response.sendRedirect(nonsslpath+"/welcome.jsp"); //for non ssl
    like the same way
    Regards,
    Nishant Kulkarni

  • How do you change the Selected Email Client

    I have created a form that submits XML data by email.
    The first time you click the "Submit by Email" button, a dialogue box opens up and asks you to select one of 3 options: "Desktop Email Application", "Internet Email" or "Other".
    The problem that is occurring is that people will either not read the statement or out of ignorance select "Desktop Email Application" when in fact they have internet based email. There is no apparent way to go back and reset this preference.
    Does anyone know where this preference is stored and how to change it?
    Alternatively, does anyone know how to generate the XML file by an alternate method that could be saved and then attached to an email?
    This has been a major problem that has prevented the use of this form, any help would be greatly appreciated.

    This setting is handled by your Operating System.  On Winddows (Win7) you go to Control Panel->Programs->Default Programs->Set Default Programs.  On OS X you set this using the preferences of you email client.  For example launch Mail and go to Mail->Preferences->General.  The first setting is for default email client.
    Hope this helps.
    Jeff Canepa
    Software Quality Engineer
    Adobe Systems, Inc.
    [email protected]

  • How do I change the default email client from Thunderbird to Gmail in FF 3.6.17?

    Using Mac, OS 10.6.7 and Firefox 3.6.17
    When I click on an email address link, Thunderbird launches, but I want always to use Gmail. How do I change the email client from Thunderbird to Gmail?

    THANK YOU SO MUCH, Tony!
    I knew it had to be pretty simple...I just couldn't find the exact location to make the change. Now done. What a relief!!!

  • Windows 2012 R2 ADRMS domain controller version and Non-domain-joined Mac Client with outlook 2011

    Hi,
    What is the AD version for Windows 2012R2 ADRMS?  Is it possible to have Windows 2003 R2 DC with Windows 2012R2 ADRMS?
    Any installation guide Non-domain-joined Mac Client with outlook 2011?
    What is the SQL version for Windows 2012R2 ADRMS?
    Please advise.  Thanks.
    Kelvin Teang

    Hi Kelvin -
    There is no RMS Client for Macs.  That functionality is actually provided through the Office for Mac application (this is different compared to the PC).  Domain-joined clients will autodiscover the RMS server and should be able to create and consume
    protected content.  Non-domain-joined clients cannot automatically discover their RMS server.  In this scenario, prepare a protected document or email from a domain-joined machine and send it to your non-domain-joined users.  They will open
    the document or email up and the URLs contained in the publishing license of the document will direct them to the correct RMS server. 
    I hope that helps!
    Micah LaNasa
    Synergy Advisors
    synergyadvisors.biz

  • IMPORTANT CHANGES TO VERIZON EMAIL ACCOUNT

    I made the changes sent in message for email on my iPhone 4.  Now I'm not getting my emails.  What can I do?

    GOOD NEWS!!
    I have MAC appliances and was able to install the updates but had to do several things to make it work (that i hadn't done before):
    make all the requested changes to server names and PORT settings (on the Macs you have to follow the Advanced tabs to do that)
    Follow the sub instructions:
    Depending on your email application, you may need to disable/turn off Secure Password Authentication and, if applicable, make sure your Authentication method is set to “Password” or “Normal password.” In addition, you may need to reboot/restart your device for these new settings to take effect and for your email to continue working properly.
    I had to check Password several times - both the incoming and outgoing are checked.
    had to change the server ports for both.
    Make sure you have up to date passwords entered.
    Had to enable SSL.
    MOST importantly: had to restart the device to make it work!!
    then mail showed up!

  • Changes between a RAC(Objects) and NON RAC

    Hi all,
    I want to findout what all the different things to be considered when an application is made to run on RAC env.
    For eg: I found there is a difference between the way the Sequences are used in a RAC env from Non RAC.
    Are there any guidelines for the Objects used in RAC?
    Also can you point me to any doc related to tuning the interconnect as we are identifying wait events related to cluster "Cluster was consuming significant database time"
    Thanks.

    Hi hyddba,
    Absolutely, at database level for application has no changes at objects.
    At application code has changes to benefit aplications from failover TAF and FAN events.
    http://www.oracle.com/pls/db102/to_toc?pathname=rac.102%2Fb28759%2Ftoc.htm&remark=portal+%28Getting+Started%29
    Regards,
    Rodrigo Mufalani
    http://mufalani.blogspot.com

  • Using SSL and non-SSL

    We are running 4.12 on Solaris 8 with SSL enabled. However, we would also
    like this server to accept queries on 389 for portions of the tree. An
    example would be that a username and phone number could be queried via 389,
    but an employee ID could only be queried by an authenticated user. Does
    anyone have any guidance on this or could point me to some documentation
    relating to this. Thanks in advance.

    Hi Ryan,
    You probably want to look at the "Managing Access Control" chapter of the
    Administrator's Guide.
    More specifically, have a look at the "Access Based on the Authentication
    Method"
    (http://docs.iplanet.com/docs/manuals/directory/41/admin/acl.htm#997696) and
    the "Defining permission based on the Authentication Method"
    (http://docs.iplanet.com/docs/manuals/directory/41/admin/acl.htm#998706)
    sections.
    I hope this helps.
    Bertold
    "Ryan Kean" <[email protected]> wrote in message
    news:9r967v$[email protected]..
    We are running 4.12 on Solaris 8 with SSL enabled. However, we would also
    like this server to accept queries on 389 for portions of the tree. An
    example would be that a username and phone number could be queried via389,
    but an employee ID could only be queried by an authenticated user. Does
    anyone have any guidance on this or could point me to some documentation
    relating to this. Thanks in advance.

  • Content server and Non SSL portlet

    I have a url that I placed in one of my portal headers that is not using SSL (i.e. http://mylink.com) My portal is SSL (https://myportal.com). When a user login to the portal he gets a message from the browser ?This page accessing information that is not under it?s control. Do you want to continue?? This also happens when I place a portlet that use Google gadget or a weather web services. How do I get around this?
    We are using ALUI 6.1, w/.net
    Thank you

    here is the solution for anyone that is interested. I got it from BEA support:
    Resolution:
    This is a Zone Alert issue involved with "Cross Domain Data" access and XHTML rendering of content not on the same site as server the user lands on. (thats all i have found out so far)
    The User's IE settings in the security tab can be changed to stop the prompt. The specific setting is in the IE Tools/Internet Options/Security Tab/Custom Level Button. It is under Miscellaneous category titled "Access Data Sources Accross Domains". Set this parameter to "Enable" will stop the prompt. (But this is on the user's side not the server side)
    Also enable mixed content should be enabled as well to prevent the mixed mode security errors. This needs to be configured against each client machine.

  • Separating SSL and non-SSL transactions

    What's the best way to separate SSL andnon-SSL transactions in a single web app?Ie when the user logs in, the login formis submitted over an SSL connection, butfrom then on only certain pages/forms useSSL. If there's one JVM with the sessioninfo, how can we be sure what needs to besecured goes thru the SSL server?

    javax.servlet.ServletRequest method isSecure() - "Returns a boolean indicating
    whether this request was made using a secure channel, such as HTTPS."
    Chris Scott wrote:
    >
    What's the best way to separate SSL andnon-SSL transactions in a single web app?Ie when the user logs in, the login formis submitted over an SSL connection, butfrom then on only certain pages/forms useSSL. If there's one JVM with the sessioninfo, how can we be sure what needs to besecured goes thru the SSL server?

  • How do you change the default email client (Mail) to Outlook when sharing?

    In iPhoto I used Outlook as the default email to forward photos to friends.  How do you change it from Mail in Photos to Outlook?

    I am having the same problem.
    Just updated to OS X 10.10.3.
    The new Photos app will not link to Microsoft Outlook.
    Never had this problem with previous versions of iPhoto.
    I have a thread going on this topic:
    The new "Photos" will not link to Outlook email.
    Apple needs to update Photos 1.0.

  • New Email Settings - Verizon Email 14 Dec 2011

    Before making any port or other setting changes to my email program, I would like verification that the email Verizon sent out yesterday is legit.  I followed the link and it took me to http://www22.verizon.com/ResidentialHelp/FiOSInternet/Email/Setup+And+Use/QuestionsOne/124289.htm?CM... which listed several steps and other links for various versions of Outlook. 
    In reading other posts in this section, I see others have are having problems with the new settings and had to change the new back to the old, regardless of the program used. 
    If anyone from Verizon can verify the legitimacy of this, or if it has been, and I just did not see it, please do so.
    Thank you!

    Fully tested, and hundreds of thousands are using it successfully.  The only thing you should have been changing was the two ports and setting ssl on. 
    Check all your email settings. Suggested/required settings for regular verizon (not yahoo, etc)
    pop3
    outgoing requires authentication
    outgoing.verizon.net 587, 465(SSL)
    Incoming.verizon.net 110, 995(SSL)
    Apop is supported for password authentication

  • Verizon email account hacked, need a Verizon email specialist to HELP me Please.....

    My Verizon email account was hacked recently. My account has been sending out Viagra and Fat Pill emails to all of my contacts. I want to change my Verizon email account password. I've contacted Verizon through the {edited for privacy} phone number multiple times without any resolution. I've also setup at least 5 chat sessions without any resolution.
    Each time, the technical support person guides me to changing my "My Verizon" password which is not connected to my Verizon/Yahoo email portal.  This is getting frustrating, I want to change my email password not my "My Verizon" password. These systems apparently do not talk to each other.
    I've searched the internet and this seems to be a known problem for other people as well. I need a Verizon email specialist to contact me to resolve this issue. Please help me.......

    Sorry you are having difficulty, an agent with access to your account will reach out to you directly by email, private message in the Forums and/or the billing telephone number on your Verizon account for more information to help you resolve your issue.Please remember to check your spam/junk folder if you do not hear from an agent.

  • How do i know the ssl over non ssl

    Hello Gurus,
    Your answer is greatly aprreciaied ;
    a)
    https://ebusdockel.9dc.com:243/DockerMasterAJX/services/DockerMaster
    b)
    http://ebusmodel.9dc.com/DockerMasterAJX/services/DockerMaster
    How do to dtermine from the above 2 URLS difference betwenn SSL and non SSL ,your answer is appreciated.

    Hi,
    There is a way within Forms to programmatically tell whether users are in SSL or not - if you're in 11g Forms. You can use the new 11g javascript built-ins to execute javascript. Javascript will pull the URL and return it to as a VARCHAR. Then you can have PL/SQL logic to see if the url contains "https" or "http", then you can execute whatever logic you want.
    The PL/SQL Built-in you want to use is: web.javascript_eval_function
    The javascript command you want to run is: document.location.href
    If you are looking for a way to force users to go to SSL, there are some options you can do with OHS(Oracle HTTP Server) - which comes with the 11g Forms.
    I hope this helps.
    Thank you,
    Gavin
    http://pitss.com/us

  • Print Mail PDF Email client

    I just recently installed the new Office MAC 2008 (my problems seems to happen with any application) and decided to use the new Entourage as my default email client. When I'm in any application and go to Print>mail PDF a file my non-default (originally)email client keeps activating. How do I change my default email client to work when I Print>Mail PDF from within an application. Thanks Chris

    The other way to configure this is to select the "Edit Menu..." item in the print dialog's PDF button/menu. A utility window will appear. You can add new items by hitting the plus button in the lower left of that window. His the plus button and then pick Entourage. This will add the alias to the PDF Services folder for you.

Maybe you are looking for