Changes visible in BOM although ECM not released yet

Hi,
I have a BOM which has been updated together with a change number. The change number still has status "in work" and not released.
When I go to CS03, with all dates removed on the selection screen, I see the changes in there with the change number. That is ok with me, because then I expect to also see future changes in the BOM.
But when I go into CS03, with today's date in both date fields on the selection screen, I expect to see the old version of the BOM which should still be valid until the ECM is released. Not the changes done by this specific ECM. CS03 shows the BOM with the changes already in, and I think that is not correct. Why should the changes show when the ECM is not released?
Is this behaviour SAP standard or could there be a mistake in the customizing of the ECM status?
Any hint is useful.
Thanks,

Hi,
Though the status is set as "in work", the changes will be effected based on the valid from date maintained in change master CC01. You can practise putting a imaginary future date like 02.10.3333 on the valid from date in change master and when the change to be released change the valid from date as required.
You can also go through alternate date assignment in BOM.
Regards,
jyj9ja

Similar Messages

Admission Audit Run (Action is not possible; function not released yet)

Hi All,
I have created a Requirement Profile Template for admission audit and attached it with a program of study.
But when I am trying to run the admission audit using Transaction PIQAUD_MP_CS, its giving a message that...
Action is not possible; function not released yet....
Please tell me what does this message indicate, please let me know if u need more information regarding it.
Thanks in Advance
Sudhir Gupta

Dear Michael,
Thanks for such a beautiful and elaborative answer. Please read my comments on the points you discussed :
Create an admissions record: at this time a requirement profile is automatically generated for the program of study, as long as your program has been defined as 'Use Assessments'.
Yes its generating a requirement profile automatically as soon as admission record is created.
In the student file, go to the admissions tab and look for the icon that represents 'Audit Details'. (It looks like the icon for 'syntax check' in ABAP). Click on that.
On Clicking 'Audit Details' icon it leads to another screen which contains all information like Admission application data but requirements section is blank.
Now you are taken to a screen where you can see the admissions audit profile for the student. Execute the audit there, and you will see the list of checkboxes and results.
The requirement screen is blank. No error message.
Though i maintained the Requirement Profiles and RPT as per Cookbooks.
I want to download the screen shots of Requirement Profiles and RPT. Please let me know how to upload screen shots in SDN.
Warm Regards
Vinod Kumar

Function Module not released yet. Has anybody used them in their programs?

Hi
I am trying to use the barcode functionality during a goods movement 101 (using MIGO). As we donu2019t have any control of SAPu2019s barcode functionality thru configuration in MIGO I have developed a custom popup and I am calling this in a BADI implementation MB_MIGO_BADI. Once the user enters the barcode then I call Function module ARCHIV_BARCODE_GLOBAL to save the barcode to the standard tables.
This Function module is not released to the customers and it was last changed on 11/12/2004.
My question is should I be using this Function module in my BADI implementation even though it is not released (does not have a release date) ?. Has anyone of have used a unreleased Function module in your programs?.
Additionally I need this info
I am using ECC 5.0. If anyone of you is using ECC 6.0 or higher can you please check and let me know if this FM ARCHIV_BARCODE_GLOBAL is released or not or when was it last changed.
Please advice me at you earlist
Thanks of your time
SHraj

Hi,
We are not using the above FM. But I can give some Info from ECC 6.0.
In ECC 6.0 the above FM is realeased for customers.
Last changed on:28.12.2004 18:28:16.
You can use the same code in ur Z function module.
Thanks and Regards

Changes made in Design view does not update on Run

Hello,
I add a button, or move some components around has no effect when I run the application. I am using Flash Builder for PHP 4.5 and there is no way to tell FB to compile the mxml file. In other Eclipse distribution, you have Compile and Run. I only have Run.
Previously, clicking Run would make the changes visible. Now, that does not work. I always see the old view. I have tried doing a Clean, but without success.
I would appreciate any input on this matter.
Thank you.

So again: What did not work:
1) Clean build
2) deleting relevant swf files
Point 2 hinted me what to do. If the file is inexistant and Google Chrome still opened it, then the most probable reason was the cache. After clearing the Chrome cache, my swf files were loaded with the changes I made.
I have stopped using Chrome now, and back to old Firefox. Firefox is a memory hog, but it just works.
Hope the above provides help to anybody having the same problem.

Note 1723097 needs pre-requisite note 1885829 not released

I tried to implement note 1723097 - System measurement: Background job terminates (RSUVM0xx) at SAP GRC-AC system, SAP_BASIS 702 level 11, and it needs as pre-requisite the note 1885829 which is not released yet.
Thanks in advance for a brief solution.
Gabriel Aquino

Gabriel,
What did the SAP AGS agent assigned to your Customer Message have to say about the prerequisite Note? We are not AGS here, or even SAP employees for the most part. Questions you have for SAP need to be submitted to SAP per their support processes.
Gretchen

Restrict documents from being assigned to a BOM while status is not release

Hi,
I need certain documents to be restricted while they are still 'In preparation' status.
Currently eventhough the status is not released, user can assign a document to a BOM.
I am sure i am missing something. Let me know if anyone has done this. We are not using ECM at this stage.
Regards,
Edi

Hi,
You can do this via workaround of authorization matrix.
1. Create two users: Creator, Approver & Assigner
2. Creator will not have authorization to release the document as well as to assign the document to BOM. Authorization to release the document can be prevented by authorization object C_DRAW_STA. The authorization of object linkage is controlled by object C_DRAD_OBJ
3. Approver will have authorization to release the document.
4. finally assigner will have only document to access the change document when it is released and only then he/she will be able to assign the object linkage.
Or you can go for BASi/User exit at the time of save to control the same.
Thanks
SUMIT GUPTA

Changes made in BOM are not reflected in Configurator.

Hi all,
When i update minimum and maximum quantities in BOM, the new values are not reflected in the configurator.
I have found a patch (patch# 4410573) for this issue in metalink and applying that patch did not resolve the issue.
I have logged an SR with Oracle for this and Oracle support have asked me to run "Refresh Single Configuration Model" concurrent program and see if the changes are reflected.
This program has 2 parameters one for folder and the other for Configuration Model Id.
When i try to run the program, for any of the folders, the value set for the parameter Configuration Model Id does not show any values and hence i am unable to run the program.
We don't have a separate instance for COnfigurator.
Do i need to do any set up so that my Configuration model is reflected in the LOV?
Can anyone please help me on this?
Oracle Apps version: 11.5.10.2
Configuration software build: 11.5.10.25.43A
Regards,
Sreekanth

Hi Jason,
Please see my comments below
Jason said*
Support is correct. If you haven't run the Refresh a Single Configuration Model concurrent program for your model, then the new BOM attributes will not be visible in your model. Changes to items/BOMs are not directly reflected in the configuration model. You must "refresh" the model to see the changes.*
Even without running the "Refresh a Single Configuration Model" concurrent program, in some scenarios, changes are being reflected in Configurator.
Ex:
When i change only minimum and maximum quantities, the changes i.e. new minimum and maximum values are not reflected in Configurator.
But, when i also change any of the following fields along with minimum and maximum quantities, new values are being updated in Configurator with out running the refresh program.
effectivity_date, disable_date, component_quantity, planning_factor, component_yield_factor and optional class
Can you please explain this?
Also, i have already tried executing the query by commenting the enclosing_folder check. But still, the query is not retrieving any records.
Basically, the sub-query that fetches devl_project_id itself is not retrieving any records.
Jason said:+
Based on the SQL above, the only criteria for importing a model is that the item under the folder must be:+
a. A Model (PRJ = Project)+
b. The Model cannot be deleted (Deleted_flag must be '0')+
c. And the model must have been imported from Oracle apps, e.g. it cannot be a non-BOM model (orig_sys_ref is not null)+
Can you please tell how can i check whether model is imported into configurator or not and if it is imported from where is it imported?
Regards,
Sreekanth
Edited by: Sreekanth Munagala on May 12, 2011 8:52 AM

Change visible despite no release given

Hello,
I am using the ECR/ECO object to perform and monitor the change of objects - in this case BOMs.
I am not sure that the system behaves as designed so please chime in to tell me if it is standard or not.
Here are the steps I perform.
- I create an ECR and indicat a single object - a BOM and save it.
- I change the Status of the ECR to Check ECR
- I change the status of the object to Release possible
- I change the status of the ECR to ECR Checked, Approve ECR, Convert ECR
- I then give the change a validity date - say in two weeks time.
- I perform the change
I now create a production order such that the dates fall within the validity of the change request.
I am surprised too see that the change is being picked up!
I have not activated the 'complete change' or 'release change' status for the object, nor I have I activated the 'close ECO' or 'Release ECO' for the change header.
Is this normal behaviour? If it is, what is the point of the 'complete change' / 'release change' statuses?
Thanks for your thoughts.

hi
check the business transaction allowed for the status

The ePrint center can not release my email address what I deleted. So, I have to change another.

The ePrint center can not release my email address what I deleted. So, I have to change another.
How can I use the address again?
Thanks.

Hello GeorgeChang,
You can not use the same custom ePrint email for your printer until it becomes unlocked in six months. Sorry for the inconvenience.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

How to see any changes done in BOM through Engineering change management?

Dear experts,
My client need to verify the revision of some assemblies in BOM through ECM.
I tried to verify it by taking some change numbers & executing it in CC03. I am getting the history date & name of person who done the changes. But can not able to see the actual changes.
Could you please tell me how to see the changes done?
Thanks in advance for cooperation & support.
Regards,
Mehul Veni

Dear Mehul Veni,
Assuming you have created a change number through CC01 and made changes in CS02 for a particular BOM by entering this
change number in the input screen in CS02.
Once after making BOM changes,save the data and check in CC03>enter the same change number>menu->environment-
>reporting->Bill of material--->select the change number and click on expand sub-tree and you will get all the required details.
Check and revert
Regards
Mangalraj.S

BOM Validity-ECM

Hi Gurus,
How to configure BOM validity from to to date ?
Before posing this question, I have gone through the threads in SDN.
As said, I tried to create BOM with ECM. Valid till date is not changing.
BOM-1 valid from 01.01.2008 to 31.12.9999 with ECM No
BOM-2 valid from 01.07.2008 to 31.12.9999 with ECM No
As per the configuration, BOM-1 must be valid till 30.06.2008 and in display mode dates must be 01.01.2008 to 30.06.2008.
regards
Ram Kumar

Hi Ram,
This is not possible in Standard SAP.
Eevry time the Vaild to will be 31.12.9999 (this is system setting).
This is valid if you use ECM or Not.
But, will ECM you can control this..
With Revision level concept you can control the BOM explosion also..
Regards,
Siva

Recover_cancel returns 0 although DB not yet shut down

While using a script to "feed" a shadow database with logs, we quite often see, that a recover_cancel is issued, dbmcli returns with 0 but if another log is available and db_admin is executed, it fails with
>db_admin
ERR
-24783,ERR_WRONGDBSTATE: Operational state UNKNOWN
of the database instance is unsuitable.
-24779,ERR_DBSTATENEEDED4: Database instance must be
in one of the operational states OFFLINE, ADMIN, STANDBY or ONLINE.
The script we use looks like
db_admin
db_connect
recover_start logsich log 14327
recover_replace logsich /archivelog/log 14328
recover_replace logsich /archivelog/log 14329
recover_replace logsich /archivelog/log 14330
recover_replace logsich /archivelog/log 14331
recover_replace logsich /archivelog/log 14332
recover_replace logsich /archivelog/log 14333
recover_replace logsich /archivelog/log 14334
recover_replace logsich /archivelog/log 14335
recover_replace logsich /archivelog/log 14336
recover_replace logsich /archivelog/log 14337
recover_cancel
If the script is started a minute later, it works flawlessly.
This behaviour creates quite a lot of false alarms (happens up to 10 times a day).
I know, I could simply add a sleep command, I just want to know, why recover_cancel returns 0 despite the database engine not having released yet the shared memory and is really offline.
Markus

Hi Steffen,
> And here it comes: the kernel waits during this for an answer of the client although there will actually be none because the client 'knows' that the kernel will shut down. Anyway the kernel waits to make sure the communication segment used for message exchanging with the client is not used anymore and can be released. This waiting is limited to 90s. After that time the kernel releases the communication segment and finally shuts down.
> Anyway it is not assured by the protocol that the kernel is down at the moment the recover_cancel returns and you shouldn't rely on it.
Is this behaviour likewise just when using a recover_cancel or is it also the same when using db_offline?
> With 7.9 the behavior on Unix is changed and the kernel is almost immediately down when the command returns. Up to the release of that release you should indeed wait this 1,5 min until restarting the kernel.
Would it be possible to use dbmcli -s instead? I'll guess, I better put a 'pause' into the script then.
Thank you very much for your time and the analysis.
Markus

Mail.jar is locked when sending a mail using servlet and not releasing

Hi everybody,
The mail.jar is locked in tomcat while sending the first message and not released until the tomcat get restarts.
the problem is not recorded in any logs.
1. Please create a servlet that sends mail
2. Send a mail to any mailid
3. then after the mail is send please try to delete the mail.jar or please deploy the same servlet again with some small changes (for redeploying take place only a few changes is there - please change any strings a little bit)
then try to send mail using this servlet will not send mail becoause it will not redployed correctely.
when i removed Transport.send(msg); from code it works fine. but ??
please help me to recover from this issue. i don't want to turn on tomcat antiJarlocking and antiresourcelocking to true, becaouse this craete many other problems.
please help me to recover from this issue.
Thanks,
Prasad.N

hi friend
I am using advanced version of jdk. i i have used many other jar files like mysqlconnector, logging, commonhttpclient, etc.... the only problem is with mail.jar. that locks are released when its use completed, but the lock holds until tomcat shutdown in mail.jar.
what may be the reason?
Thanks,
Prasad.N

Could not release my own Key Figure from DP to SNP

Hi SAP Experts,
As requirement, I have to run forecast for three Key Figures in Demand Planning (DP): Z_FK1, Z_KFK2, Z_FK3. Unit of measure of these Keyfigure are VND (currency Viet Nam Dong).
I added these Key Figures to DP Planning Area with name Z_DPPlan01.
I created a new Planning Area in SNP with name: Z_9ASNP02 by coppying from the standard 9ASNP02. Then I added the above Key Figures (Z_FK1, Z_KFK2, Z_FK3) into Z_9ASNP02 planning area.
After I runing forecast in DP, I tried to release value of three Key Figures into SNP with tcode: /n/sapapo/mc90. Although system informs that u201CRelease successfully executedu201D, nothing released from Z_DPPlan01 to Z_9ASNP02 when I check in SNP Planning book.
Question is:
How to configure Key Figures in SNP and DP (Sematic, Key Figure Function, Category, Category Groupu2026) so that we can release all three above Key Figures from DP to SNP?
Thanks very much for your help!
Duyennx

Dear Pawan,
2 . The business requirements are:
Our customer is a bank that has many branches. They want to forecast for each branches:
- The Total money (all denominations) will be issued in next quater (Z_KF1). This base on historical data (Z_HIS1)
- The total money (all denominations)will be received in next quater (Z_KF2). This base on historical data (Z_HIS2)
Base on these forecast KFs, we need to calculate the Average of Total money will be received and Issued in next quarter (Z_KF3 = (Z_KF1+ZKF2)/90.
90 is the number of days in a Quarter.
We need to release the three KFs from DP to SNP for further calculation and reporting. As said previously, I added three time series KFs Z_KF1, Z_KF2, Z_KF3 to SNP Planning Area (Z_9ASNP02)
If could not release, we can coppy. But the problem is that: in DP, beside standard characteristics 9AMATNR and 9ALOCNO, we also added more custom characteristics like Z_TYPE (to generate CVCs and to drill down money by type (cotton, polymer, coin)). So when I run the Tcode /n/sapapo/tscopy, despite of the fact that in u201CCharacteristic Assignmentu201D I only assigned 9AMATNR and 9ALOCNO from source to target, system show message like:
3 combinations not contained in target master planning object structure
Message no. /SAPAPO/MSDP_REL108
Diagnosis
Characteristic combinations exist in the source planning area's master planning object structure that are not contained within the master planning object structure of the target planning area.
System Response
The source data of these characteristic combinations is not written to to the target planning area.
So, How to copy with my case?
4.Please Explain more about:
u201CCreate a third custom category group containing your custom category, and add this under 9AMALO. Give only your category group name & Semantic should be 000u201D
4.1.I can creat a custom category group under menu path:
SAP Reference IMG u2192 Advanced Planning and Optimization u2192 Supply Chain Planning u2192 Supply Network Planning
u2192 Basic Settings u2192 Maintain Category Groups.
But where can I create my custome category? Is this menu path:
SAP Reference IMG u2192 Advanced Planning and Optimization u2192 Global Available-to-promise (Global ATP) u2192 General Settings u2192 Maintain Category
In this path, I can see to folder:
-u201CSAP categoriesu201D: We could not create new category in this folder
- and u201Cnon-SAP Categoriesu201D: I can press button u201CNew Entriesu201D and key in Data like:
oCategory: TT
oCategory text: TT
oCategory Description: TT
oSort String: 99
oCategory type: Requirements (I also tried with Forecast, Stock, Receipt)
And then, press u201CSaveu201D button. But system always create message:
u201CEnter values in work area for non-key fields
Message no. SV174
Diagnosis
An entry has been made for a non-key field in the view or table, which does not satisfy a selection condition stored in the Dictionary or made in the maintenance transaction initial screen.
System Response
The values entered cannot be accepted.
Procedure
Ensure that your entry is correct. This data record will not be displayed if you use the same selection conditions again.u201D
I donu2019t know what wrong here. How to create my custom Category? Here is u201Cnon-SAP Categoriesu201D, Is there any problem if we create category with this type?
4.2 How to add custom Category Group under 9AMALO? Which T-code we use?
5. By the way, Please clearly explain for me:
5.1. What are differences between u201CTime series live cacheu201D and u201COrder live cacheu201D?
5.2. What are differences between releasing KFs from DP to SNP and copying KFs from DP to SNP?
Thanks very much for your help!
Edited by: xuanduyen on Dec 31, 2011 4:38 AM

File Adapter creating huge connections and not releasing.

Hi,
We see high no. of current connections in file adapter from weblogic console against eis/HAFileAdapter under deployments -> fileadapter -> monitoring -> Outbound Connection Pools and are concerned about the same. It seems like fileadapter is not releasing the connection and hence no. of connections are piling up over a days and depending upon the transactions. coz after a restart the values comes down from 36000 to 10 ( which is default initial connection).
But when i see at the datasource level i don't see that much number of active connections. Need to know why this is happening and is this behavior is expected?
We are using SOA 11g PS2
Below is the deployment plan for fileadpater in use:
<?xml version='1.0' encoding='UTF-8'?>
<deployment-plan xmlns="http://xmlns.oracle.com/weblogic/deployment-plan" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://xmlns.oracle.com/weblogic/deployment-plan http://xmlns.oracle.com/weblogic/deployment-plan/1.0/deployment-plan.xsd" global-variables="false">
<application-name>connectors</application-name>
<variable-definition>
<variable>
<name>ConfigProperty_controlDir_Value_12732617703910</name>
<value>/var/opt/soa_nfs/data/SOA_PRD_DOMAIN/config/FileAdapter</value>
</variable>
<variable>
<name>ConfigProperty_outboundLockTypeForWrite_Value_12737938820080</name>
<value>oracle</value>
</variable>
<variable>
<name>ConnectionInstance_eis/HAFileAdapter1_JNDIName_13010279387490</name>
<value>eis/HAFileAdapter1</value>
</variable>
<variable>
<name>ConfigProperty_controlDir_Value_13010283495591</name>
<value>/var/opt/soa_nfs/data/SOA_PRD_DOMAIN/config/FileAdapter</value>
</variable>
<variable>
<name>ConfigProperty_inboundDataSource_Value_13010283655032</name>
<value>jdbc/SOADataSource</value>
</variable>
<variable>
<name>ConfigProperty_outboundDataSource_Value_13010283782973</name>
<value>jdbc/SOADataSource</value>
</variable>
<variable>
<name>ConfigProperty_outboundDataSourceLocal_Value_13010283877514</name>
<value>jdbc/SOALocalTxDataSource</value>
</variable>
<variable>
<name>ConfigProperty_outboundLockTypeForWrite_Value_13010283941445</name>
<value>oracle</value>
</variable>
<variable>
<name>ConfigProperty_inboundDataSource_Value_13081683627140</name>
<value>jdbc/SOADataSource</value>
</variable>
<variable>
<name>ConfigProperty_outboundDataSource_Value_13081683875571</name>
<value>jdbc/SOADataSource</value>
</variable>
<variable>
<name>ConfigProperty_outboundDataSourceLocal_Value_13081684137432</name>
<value>jdbc/SOALocalTxDataSource</value>
</variable>
<variable>
<name>ConnectionInstance_eis/HAFileAdapter_Wedb_JNDIName_13369118887880</name>
<value>eis/HAFileAdapter_Wedb</value>
</variable>
<variable>
<name>ConfigProperty_controlDir_Value_13369119117411</name>
<value>/var/opt/soa_nfs/data/SOA_PRD_DOMAIN/config/FileAdapter</value>
</variable>
<variable>
<name>ConfigProperty_inboundDataSource_Value_13369119237302</name>
<value>jdbc/SOADataSource</value>
</variable>
<variable>
<name>ConfigProperty_outboundDataSource_Value_13369119486683</name>
<value>jdbc/SOADataSource</value>
</variable>
<variable>
<name>ConfigProperty_outboundDataSourceLocal_Value_13369119703484</name>
<value>jdbc/SOALocalTxDataSource</value>
</variable>
<variable>
<name>ConfigProperty_outboundLockTypeForWrite_Value_13369119820485</name>
<value>oracle</value>
</variable>
</variable-definition>
<module-override>
<module-name>FileAdapter.rar</module-name>
<module-type>rar</module-type>
<module-descriptor external="false">
<root-element>weblogic-connector</root-element>
<uri>META-INF/weblogic-ra.xml</uri>
<variable-assignment>
<name>ConfigProperty_controlDir_Value_12732617703910</name>
<xpath>/weblogic-connector/outbound-resource-adapter/connection-definition-group/[connection-factory-interface="javax.resource.cci.ConnectionFactory"]/connection-instance/[jndi-name="eis/HAFileAdapter"]/connection-properties/properties/property/[name="controlDir"]/value</xpath>
</variable-assignment>
<variable-assignment>
<name>ConfigProperty_outboundLockTypeForWrite_Value_12737938820080</name>
<xpath>/weblogic-connector/outbound-resource-adapter/connection-definition-group/[connection-factory-interface="javax.resource.cci.ConnectionFactory"]/connection-instance/[jndi-name="eis/HAFileAdapter"]/connection-properties/properties/property/[name="outboundLockTypeForWrite"]/value</xpath>
</variable-assignment>
<variable-assignment>
<name>ConnectionInstance_eis/HAFileAdapter1_JNDIName_13010279387490</name>
<xpath>/weblogic-connector/outbound-resource-adapter/connection-definition-group/[connection-factory-interface="javax.resource.cci.ConnectionFactory"]/connection-instance/[jndi-name="eis/HAFileAdapter1"]/jndi-name</xpath>
<origin>planbased</origin>
</variable-assignment>
<variable-assignment>
<name>ConfigProperty_controlDir_Value_13010283495591</name>
<xpath>/weblogic-connector/outbound-resource-adapter/connection-definition-group/[connection-factory-interface="javax.resource.cci.ConnectionFactory"]/connection-instance/[jndi-name="eis/HAFileAdapter1"]/connection-properties/properties/property/[name="controlDir"]/value</xpath>
</variable-assignment>
<variable-assignment>
<name>ConfigProperty_inboundDataSource_Value_13010283655032</name>
<xpath>/weblogic-connector/outbound-resource-adapter/connection-definition-group/[connection-factory-interface="javax.resource.cci.ConnectionFactory"]/connection-instance/[jndi-name="eis/HAFileAdapter1"]/connection-properties/properties/property/[name="inboundDataSource"]/value</xpath>
</variable-assignment>
<variable-assignment>
<name>ConfigProperty_outboundDataSource_Value_13010283782973</name>
<xpath>/weblogic-connector/outbound-resource-adapter/connection-definition-group/[connection-factory-interface="javax.resource.cci.ConnectionFactory"]/connection-instance/[jndi-name="eis/HAFileAdapter1"]/connection-properties/properties/property/[name="outboundDataSource"]/value</xpath>
</variable-assignment>
<variable-assignment>
<name>ConfigProperty_outboundDataSourceLocal_Value_13010283877514</name>
<xpath>/weblogic-connector/outbound-resource-adapter/connection-definition-group/[connection-factory-interface="javax.resource.cci.ConnectionFactory"]/connection-instance/[jndi-name="eis/HAFileAdapter1"]/connection-properties/properties/property/[name="outboundDataSourceLocal"]/value</xpath>
</variable-assignment>
<variable-assignment>
<name>ConfigProperty_outboundLockTypeForWrite_Value_13010283941445</name>
<xpath>/weblogic-connector/outbound-resource-adapter/connection-definition-group/[connection-factory-interface="javax.resource.cci.ConnectionFactory"]/connection-instance/[jndi-name="eis/HAFileAdapter1"]/connection-properties/properties/property/[name="outboundLockTypeForWrite"]/value</xpath>
</variable-assignment>
<variable-assignment>
<name>ConfigProperty_inboundDataSource_Value_13081683627140</name>
<xpath>/weblogic-connector/outbound-resource-adapter/connection-definition-group/[connection-factory-interface="javax.resource.cci.ConnectionFactory"]/connection-instance/[jndi-name="eis/HAFileAdapter"]/connection-properties/properties/property/[name="inboundDataSource"]/value</xpath>
</variable-assignment>
<variable-assignment>
<name>ConfigProperty_outboundDataSource_Value_13081683875571</name>
<xpath>/weblogic-connector/outbound-resource-adapter/connection-definition-group/[connection-factory-interface="javax.resource.cci.ConnectionFactory"]/connection-instance/[jndi-name="eis/HAFileAdapter"]/connection-properties/properties/property/[name="outboundDataSource"]/value</xpath>
</variable-assignment>
<variable-assignment>
<name>ConfigProperty_outboundDataSourceLocal_Value_13081684137432</name>
<xpath>/weblogic-connector/outbound-resource-adapter/connection-definition-group/[connection-factory-interface="javax.resource.cci.ConnectionFactory"]/connection-instance/[jndi-name="eis/HAFileAdapter"]/connection-properties/properties/property/[name="outboundDataSourceLocal"]/value</xpath>
</variable-assignment>
<variable-assignment>
<name>ConnectionInstance_eis/HAFileAdapter_Wedb_JNDIName_13369118887880</name>
<xpath>/weblogic-connector/outbound-resource-adapter/connection-definition-group/[connection-factory-interface="javax.resource.cci.ConnectionFactory"]/connection-instance/[jndi-name="eis/HAFileAdapter_Wedb"]/jndi-name</xpath>
<origin>planbased</origin>
</variable-assignment>
<variable-assignment>
<name>ConfigProperty_controlDir_Value_13369119117411</name>
<xpath>/weblogic-connector/outbound-resource-adapter/connection-definition-group/[connection-factory-interface="javax.resource.cci.ConnectionFactory"]/connection-instance/[jndi-name="eis/HAFileAdapter_Wedb"]/connection-properties/properties/property/[name="controlDir"]/value</xpath>
</variable-assignment>
<variable-assignment>
<name>ConfigProperty_inboundDataSource_Value_13369119237302</name>
<xpath>/weblogic-connector/outbound-resource-adapter/connection-definition-group/[connection-factory-interface="javax.resource.cci.ConnectionFactory"]/connection-instance/[jndi-name="eis/HAFileAdapter_Wedb"]/connection-properties/properties/property/[name="inboundDataSource"]/value</xpath>
</variable-assignment>
<variable-assignment>
<name>ConfigProperty_outboundDataSource_Value_13369119486683</name>
<xpath>/weblogic-connector/outbound-resource-adapter/connection-definition-group/[connection-factory-interface="javax.resource.cci.ConnectionFactory"]/connection-instance/[jndi-name="eis/HAFileAdapter_Wedb"]/connection-properties/properties/property/[name="outboundDataSource"]/value</xpath>
</variable-assignment>
<variable-assignment>
<name>ConfigProperty_outboundDataSourceLocal_Value_13369119703484</name>
<xpath>/weblogic-connector/outbound-resource-adapter/connection-definition-group/[connection-factory-interface="javax.resource.cci.ConnectionFactory"]/connection-instance/[jndi-name="eis/HAFileAdapter_Wedb"]/connection-properties/properties/property/[name="outboundDataSourceLocal"]/value</xpath>
</variable-assignment>
<variable-assignment>
<name>ConfigProperty_outboundLockTypeForWrite_Value_13369119820485</name>
<xpath>/weblogic-connector/outbound-resource-adapter/connection-definition-group/[connection-factory-interface="javax.resource.cci.ConnectionFactory"]/connection-instance/[jndi-name="eis/HAFileAdapter_Wedb"]/connection-properties/properties/property/[name="outboundLockTypeForWrite"]/value</xpath>
</variable-assignment>
</module-descriptor>
<module-descriptor external="false">
<root-element>connector</root-element>
<uri>META-INF/ra.xml</uri>
</module-descriptor>
<module-descriptor external="true">
<root-element>wldf-resource</root-element>
<uri>META-INF/weblogic-diagnostics.xml</uri>
</module-descriptor>
</module-override>
<config-root>/opt/soauser/products/soa11.1/Oracle_SOA1/soa/connectors/plan</config-root>
</deployment-plan>
-Rohit

Hi Arik,
To answer your questions :
You are using HAFileAdapter in your processes JNDI defenitions? --Yes
Check in your HAFileAdapter Connection Pool if Shrinking Enabled is set to true. --Its set to true
I would recomend also to change the properties Test Connections On Reserve to true, and Test Frequency Seconds(900 is the default). --These properties are also in place
-Rohit

Changes visible in BOM although ECM not released yet

Similar Messages

Maybe you are looking for