Changin SID of cloned virtualized R/3 4.6c system
Hello all,
we are planning an upgrade of our R/3 4.6c landscape (DEV, QUAL, PROD) to EHP5 for ERP 6.0. Our systems are on VMware (ESX), Windows Server 2003, Oracle 10.2.0.5
We plan to setup Solution Manager 7.1.
While upgrading DEV and TEST we need to setup a Dual-Maintenance landscape of dev_temp and qual_temp. For that we usually would install SAP 4.6c on other hosts and do a systemcopy of dev and qual. But it will be too complicated to setup this old R/3 4.6c landscape again and do a systemcopy with R3Load on it. That is why we want to clone dev and qual and rename host and SAP SID afterwards (as we cannot have identical SIDs in system landscape). I have not been able to find a proper guideline for changing the SID of a SAP instance. The advice in this forum was to do a homogenous systemcopy. As we want to avoid this whole procedure, do you have some kind of checklist what has to be reconfigured when changing the SID afterwards?
Thanking you in advance and kind regards
Luthien
As its a 4.6 ABAP system a clone using an offline backup of the source system will let you change the sid by updating the .afd file and the control files
You cannot change sid by simply edit the profiles.
Regards
Juan
Similar Messages
-
What within /sapmnt/ SID can be freely deleted on an QAS system(not produc
Hello
What within /sapmnt/<SID> can be freely deleted on an QAS system(not productive). I have in mind especially logs (job logs...)
Thank you in advancewhy not use the standard SAP procedures (RSBTCDEL etc.)?
are the standard jobs implemented? have a look into sapnote 16083...
GreetZ, AH -
SAP LVM 2.0 Provisioned/Cloned Virtual Hosts
Hi All,
Could you please let me know how to define a virtual host in SAP LVM 2.0.
I have configured Virtualization Manager in SAP LVM 2.0 and added the virtual host to SAP LVM 2.0, But I am not able to see configured virtual host cloning screen.
Kindly suggest me on this.
Thanks and Regards,
PrasadHi Michael,
Thank you, we have configured virtualization Manager in LVM and host agent is also installed on virtual host.
Thanks and Regards,
Prasad -
Oracle VM 3.1.1: Cloning virtual disks between local filesystems
Hi all,
Is it possible to clone virtual disk between two repositories where each repository is based on own local filesystem?
I receive an error when trying to do such clone in OVM Manager:
OVMAPI_7262E Unable to find an owned and running server to perform copy_file operation on +diskname+thanks in advance,
MiroslawYou can clone disks between repositories, if both repositories are presented to at least one server at the same time.
-
Recommended imaging/cloning method for Windows 8.1 system
Can anyone recommend a reliable way to completely image/clone a windows 8.1 based system?
I've tried 3 different methods with mixed success:
1. My old faithful method uses EzGIG-III, but the BIOS setting for boot configuration needs to be changed to CMS because the tool is DOS based. The cloning operation takes forever (~12 hours for my machine with a 750GB HDD that only uses 200GB). I've tried it twice. The first time I got a boot error when booting the clone, but Windows managed to automatically repair the boot issue. The second time I had no errors at all.
2. I've tried the free version of Macrium Refect three times. First time was from a bootable USB version and I don't recall any issue. Second time was from within Windows. When I swapped the drive and tried to boot the clone, the boot failed and I got a nasty error message about winload.efi missing. I did some Googling and found a command line procedure to rebuild the missing file, which seemed to work. Third time was also within Windows and everything worked ok (I'm using the resulting clone right now as a matter of fact). Nice thing is the cloning operation only took 2 1/2 hours (compared to 12 hours with EzGIG). Also, I had trouble cloning in the opposite direction - just couldn't get it to work.
3. Third method is the System Image utility that's built into Windows 7/8/8.1. It failed right away claiming the destination location had insufficient space for the image even though the capacity was much greater than the source. I'm working through this right now and am hopeful to get it working. The down side of this method is that two separate operations are needed; one to create the image and a second one to restore it. Also, I wonder if the image will include non-windows partitions (as in Linux dual boot).
I'd appreciate any positive stories about successful cloning / imaging.
Solved!
Go to Solution.I've tried the free version of Macrium Refect three times. First time was from a bootable USB version and I don't recall any issue. Second time was from within Windows. When I swapped the drive and tried to boot the clone, the boot failed and I got a nasty error message about winload.efi missing..
I've had mixed results with cloning. But restoring from an image always works. If you want reliability, do it that way.
Third method is the System Image utility that's built into Windows 7/8/8.1. It failed right away claiming the destination location had insufficient space for the image even though the capacity was much greater than the source.
The down side of this method is that two separate operations are needed; one to create the image and a second one to restore it.
Also, I wonder if the image will include non-windows partitions (as in Linux dual boot).
1. That problem occurs because the perverse backup program wants to write to each partition on the drive being imaged. See this thread for the fix.
Cant backup 8.1 using system image backup! Error 0x80780119
2. As I said, I've found imaging to be more reliable than cloning. How often would you restore? We image all our computers daily (3am) and retain images for ten days.
3. The image includes all the partitions on the disk - at least mine does.
In case you want to use the built-in imaging program, I can give you a shortcut to it in Windows 8.1.
-Jerry -
Cloning a bootable disk as a system backup
I have a Sun M5000 System running Solaris 10. It has 4 slots in the face panel for removable drives. The 1st 2 slots are the ones we use, for the mirrored, boot file system. I don't have tape drives on this system, but I do want to be able to make system backups.
What I do have are more identical, removable drives that I can add to the 2 other slots. (and we have the 2nd IO controller module to make those slots active) It seems to me that the easiest "system backup" to restore after a disaster would be to somehow 100% clone the mirrorred boot drives to a 2nd pair, and remove them for safekeeping. This pair could then be put into a replacement system, and immediately boot as the old system.
Is this possible ? Is there a simple technique to do this ? Hopefully it can be done "live" and not need to be in single user mode, as this system is in use 24/7.
.the no tape drive may hurt you in the long run if you update a lot of data on your existing mirror. you can use dd to do what you want, use meta* cmds or vxvm if thats what is the current env. note that if you update lots of data on your mirror, having the old boot volume usable may not help much or will result in lots of rebuild time anyway.
-
Mirror virtual machines between two nas systems
Hello everyone,
I have an esx3.5 server and the vm's are stored in a thecus n5200pro nas using iSCSI. the synchronization module installed in the nas doesn't support iSCSI so I'm trying to find a solution to my problem.
Basically what I need is to mirror the first nas on the second so if the first one fails, I can just change the backup nas ip address and get things working again.
The only solution I found so far (which I'm currently testing) is using win2k3. I installed the ms iscsi initiator and created a mirror between the volumes of the two nas systems. It's currently synchronizing so I don't know if this will work yet.
My question is if there is a better way to handle this job without having to buy additional software. if not, is my current setup going to work?
guidoHi Pranay,
>>There is a storage server which is added on both the host under as ISCSI array option :-
Do you mean the two hosts are connecting same ISCSI target of the storage server ?
Based on my understanding , shared storage is used for cluster .
Could you please tell us where the VMs is stored ?
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] . -
Virtual Cube with DTP for direct access
Hello experts, I would like to hear about some tips to improve performance on reporting over this kind of infoprovider. If there were no performance impact in reporting then this cubes would be perfect to face the requirement we are facing. So I would like to get some help on deciding if we can go ahead with this idea or not.
The volume of information is not going to be small in underlying cube staged in APO source system but we can take care on reports using restrictions and small horizons of information. There is no processing in BW side, we would just transfer records from source system to report.
What else besides restrictions in reports can we do to reduce query performance impact? Any work in underlying cube like partitioning, compression or so?.
Any advice from your experience?.
Thanks so much.Hi Martin,
There are 2 BCS documents that might give you some starting point on Virtual cubes, if you have a S-userID for service.sap.com/support, these generally discuss the use of Multiproviders, helped by VirtualProviders so you'll have to skip through some redundnat content.
How tou2026 use Deltacache and Deltapair in SEM-BCS (
https://websmp208.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000063832008E)
How to... configure the Delta Load based MultiProvider Scenario
https://websmp208.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000063842008E
or
https://websmp208.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700006323702006E
How to... Set up a SEM-BCS Data Mart in BW;
https://websmp208.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700006323962006E
A generic Virtual provider link that I had lying around;
https://websmp208.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700004124212004E -
Error adding Win Server Technical Preview host to Virtual Machine Manager Technical Preview
I've built Win Server Preview (latest build 9888).Also build System Center Technical Preview, on another server (VM), and now trying to add Server Tech Preview hosts to VMM.
However VMMService is crashing, with error below.
Note I have tried multiple scenarios, including upgrade hosts from 2012 R2, install fresh as server Core, install fresh full-GUI hosts, enable Hyper-V before adding to VMM, allow VMM to enable Hyper-V...
also RunAs user is administrator of hosts and VMM, computer accounts have been added to all administrator groups, WinRM quickconfig has been run, firewall is off..
..however VMM vNext refuses to add Server vNext hosts. (however - I can add Server 2012 R2 hosts to VMM vNext with no problem)
NOTE - also, when Server Manager starts, I get "Error occurred while loading the plug-in for 481. Exception has been thrown by the target of an invocation". After this the File and Storage Services node in Server Manager is missing. Not sure if
this is related to the error below; but I get this issue in all servers built with latest .9888 build.
Error from VMM server when trying to add Tech Preview host is as follows -
VMM encountered a critical exception and created an exception report at c:\programdata\VMMLogs\abcdefg...etc.
------------------- Error Report -------------------
Error report created 07/12/2014 21:04:59
CLR is not terminating
--------------- Bucketing Parameters ---------------
EventType=VMM20
P1(appName)=vmmservice.exe
P2(appVersion)=3.2.9013.0
P3(assemblyName)=Engine.Common.dll
P4(assemblyVer)=3.2.9013.0
P5(methodName)=Microsoft.VirtualManager.Engine.EngineFSUtils.GetVolumeIDFromVolumeName
P6(exceptionType)=System.FormatException
P7(callstackHash)=c5b5
SCVMM Version=3.2.9013.0
SCVMM flavor=C-buddy-RTL-AMD64
Default Assembly Version=3.2.9013.0
Executable Name=vmmservice.exe
Executable Version=3.2.9013.0
Base Exception Target Site=140719489075608
Base Exception Assembly name=mscorlib.dll
Base Exception Method Name=System.Guid+GuidResult.SetFailure
Exception Message=Guid should contain 32 digits with 4 dashes (xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx).
EIP=0x00007ffbe1396468
Build bit-size=64
------------ exceptionObject.ToString() ------------
System.FormatException: Guid should contain 32 digits with 4 dashes (xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx).
at System.Guid.GuidResult.SetFailure(ParseFailureKind failure, String failureMessageID, Object failureMessageFormatArgument, String failureArgumentName, Exception innerException)
at System.Guid.TryParseGuidWithDashes(String guidString, GuidResult& result)
at System.Guid.TryParseGuid(String g, GuidStyles flags, GuidResult& result)
at System.Guid..ctor(String g)
at Microsoft.VirtualManager.Engine.EngineFSUtils.GetVolumeIDFromVolumeName(String volumeName)
at Microsoft.VirtualManager.Engine.ImageLibrary.StorageDataHelper.CreateVolume(MSFT_Volume volume, MSFT_Partition partition, WsmanAPIWrapper wrapper)
at Microsoft.VirtualManager.Engine.Adhc.SMStorageRefresher.GetVolumes(IVmmDbContext ctx)
at Microsoft.VirtualManager.Engine.Adhc.WindowsHostDataProperties.PopulateProperties(IVmmDbConnection dbConnection)
at Microsoft.VirtualManager.Engine.Adhc.WindowsHostAbstractionLayer.GetHostProperties(HostData oldHostData, Version agentVersion, IVmmDbConnection dbConnection)
at Microsoft.VirtualManager.Engine.Adhc.HostRefresher.GatherAllInformation(Host host, Object agentRefreshSyncObj, Boolean checkIfClustered, Boolean refreshEventCapabilities, String& clusterName, Guid taskID, ITaskContext taskContext, IVmmDbConnection
dbConnection)
at Microsoft.VirtualManager.Engine.Adhc.HostRefresher.RefreshLockedHost(Host host, Guid taskID, ITaskContext taskContext, Boolean checkClusterStatus, IVmmDbConnection dbConnection)
at Microsoft.VirtualManager.Engine.BitBos.VMRefresherBase.UpdateHostToResponding(Nullable`1& prevState, IVmmDbConnection dbConnection)
at Microsoft.VirtualManager.Engine.BitBos.VMRefresherBase.UpdateHostState(IVMComputerSystemSummary[]& vmComputers, Nullable`1& prevState, IVmmDbConnection dbConnection)
at Microsoft.VirtualManager.Engine.BitBos.VMRefresherBase.RunLightRefresher(IVmmDbConnection dbConnection)
at Microsoft.VirtualManager.Engine.BitBos.VMRefresherBase.UpdateHostAndVMs(VMRefresherType refresherType, Guid vmObjectId, VM tempVm, IVmmDbConnection dbConnection)
at Microsoft.VirtualManager.Engine.BitBos.VMRefresherBase.UpdateHostAndVMs(VMRefresherType refresherType, IVmmDbConnection dbConnection)
at Microsoft.VirtualManager.Engine.BitBos.VmLightRefresher.RefreshData(HostReference hostRef, Nullable`1& auditTaskId, IVmmDbConnection dbConnection)
at Microsoft.VirtualManager.Engine.RefreshDriver`1.<>c__DisplayClassa.<RefreshThreadFunction>b__7(IVmmDbConnection _dbConnection)
------------------- Scope Trace --------------------
[s#35e2a] HostRefresher.GatherAllInformation(host: (Host#[17c4]) { objLock = (CarmineObjectLock#[a41]) { lockType = Write, objectID = 4b67d6df-647f-4da3-a00f-12e52bdff947, objectType = VMHost, taskID = 1ee6c6db-a399-4033-ad4b-519c0d130f52, doNotRetryLock =
(bool) True }, data = (HostData#[bcbb]) { id = 4b67d6df-647f-4da3-a00f-12e52bdff947, LastUpdatedTimestamp = 07/12/2014 18:04:04, Flags = AvailableForPlacement, HostGroupID = 0e3ba228-a059-46be-aa41-2f5cf0f4b96e, AgentServerID = 57f60b84-2997-4a25-b38e-56dc8dae19e4,
OverrideHostGroupReserves = False, CPUPercentageReserve = 10, NetworkPercentageReserve = 0, DiskSpaceReserveMB = 10240, MaxDiskIOReservation = 10000, MemoryReserveMB = 2048, VhdPaths = (String[][-1]#1a4d96a) { }, VMRCEnabled = True, VMRCPort = 2179, SecureVMRCEnabled
= False, VMRCCertificateAvailable = False, VirtualizationPlatformScheme = "viridian://hvnext2-ak.dev.amust.local", SupportsLiveMigration = False, EnableLiveMigration = False, LiveMigrationMaximum = 0, LiveStorageMigrationMaximum = 0, UseAnyMigrationSubnet
= False, MigrationSubnet = (String[][-1]#2d3a296) { }, MigrationSubnetUserManaged = (Boolean[][-1]#2d62b0c) { }, MigrationAuthProtocol = CredSSP, VirtualServerState = Unknown, VirtualServerVersion = (Version#fffff) 0.0, VirtualServerVersionState = UpToDate,
IsDMZHost = False, UseCACert = False, IsNonTrustedDomainHost = False, UserName = "", Password = "<password omitted>", LogicalProcessorCount = 0, PhysicalProcessorCount = 0, CoresPerProcessor = 0, L2CacheSize = 0, L3CacheSize = 0,
BusSpeed = 0, ProcessorSpeed = 0, ProcessorModel = "", ProcessorManufacturer = "", ProcessorArchitecture = 0, ProcessorStepping = "", TotalMemory = 0, OperatingSystemName = "", OperatingSystemVersion = (Version#a00a0fff)
10.0.9888, IsoRWRepositoryAvailableBytes = 0, CpuUtilization = 0, AvailableMemory = 0, Custom = (String[][9]#1d09d25) { (null), (null), (null), (null), (null), (null), (null), (null), (null) }, MaximumMemoryPerVM = 0, MinimumMemoryPerVM = 0, SuggestedMaximumMemoryPerVM
= 0, IMAPIInstalled = False, AvailableMemoryTierredPerfCounterID = 869a7213-d9dc-41a2-a5d1-d28099894ff6, CpuTieredPerfCounterID = 68e21dec-4b18-4626-9ab3-0c136c654c79, ClusterNodeStatus = ClusterNodeStateUnknown, SecureMode = True, SslTcpPort = 5985, SslCertificateImportedByVMM
= False, SshTcpPort = 0, IsRemoteFXRoleInstalled = False, IsCPUSLAT = False, HostVolumeIDs = Ø, HostDiskIDs = Ø, StorageFileShareIDs = Ø, HostGPUIDs = Ø, InstalledVirtualSwitchExtensionIDs = Ø, HostFibreChannelHbaIDs = Ø, HostSASHbaIDs = Ø, HostInternetSCSIHbaIDs
= Ø, PhysicalMachineID = 655a0cbb-5fa8-4379-9a0a-dc645baae95c, OobType = None, IsPowerOptimizationControlled = False, RunAsAccountID = 93e5e250-394a-4917-9e06-88c7fb7edd98, CustomPropertyIDs = Ø, HealthMonitorIDs = Ø }, server = (RemoteServer#21feea7) Microsoft.VirtualManager.DB.Adhc.RemoteServer,
agentVersionState = (VersionState) { UpToDate } }, agentRefreshSyncObj: (Object) null, checkIfClustered: (Boolean#0) False, refreshEventCapabilities: (Boolean#0) False, taskID: (guid) 1ee6c6db-a399-4033-ad4b-519c0d130f52, taskContext: (TaskContext#38b9a77)
Microsoft.VirtualManager.Engine.TaskRepository.TaskContext, dbConnection: (TransactableDbContext#[1b46]) { constructionCallSite = (CallSite) { SqlContext.Connect }, sqlContext = (SqlContext#[2bd2]) { [rw] SqlContext.ConnectconstructionIdentity = (WindowsIdentity#27652b0)
System.Security.Principal.WindowsIdentity commandList: { n=46 { Q:"dbo.prc_ADHC_Host_Get(@HostID=4b67d6df-647f-4da3-a00f-12e52bdff947)", @07/12/2014 21:04:57 [+00:00:00.0019993] }, { Q:"dbo.prc_ADHC_HealthMonitor_GetAllIDsByAgent(@AgentServerID=57f60b84-2997-4a25-b38e-56dc8dae19e4)",
@07/12/2014 21:04:57 }, { Q:"dbo.prc_ADHC_HostVolume_GetIDsByHost(@HostID=4b67d6df-647f-4da3-a00f-12e52bdff947)", @07/12/2014 21:04:57 [+00:00:00.0010014] }, { Q:"dbo.prc_BTBS_CustomPropertyValue_GetCPValIDByObjID(ObjectID=4b67d6df-647f-4da3-a00f-12e52bdff947)",
@07/12/2014 21:04:57 }, { Q:"dbo.prc_ADHC_HostDisk_GetIDsByHost(@HostID=4b67d6df-647f-4da3-a00f-12e52bdff947)", @07/12/2014 21:04:57 }, { Q:"dbo.prc_ST_StorageFileShareAssociation_GetShareIDsByServerIDAndType(@ServerID=4b67d6df-647f-4da3-a00f-12e52bdff947,
@ServerType=VMHost)", @07/12/2014 21:04:57 [+00:00:00.0009995] }, { Q:"dbo.prc_ADHC_GetHostFibreChannelHbaByHostID(HostID=4b67d6df-647f-4da3-a00f-12e52bdff947)", @07/12/2014 21:04:57 }, { Q:"dbo.prc_ADHC_GetHostSASHbaByHostID(HostID=4b67d6df-647f-4da3-a00f-12e52bdff947)",
@07/12/2014 21:04:57 [+00:00:00.0010007] }, { Q:"dbo.prc_ADHC_GetHostInternetSCSIHbaByHostID(HostID=4b67d6df-647f-4da3-a00f-12e52bdff947)", @07/12/2014 21:04:57 }, { Q:"dbo.prc_ADHC_HostGPU_GetByHost(@HostID=4b67d6df-647f-4da3-a00f-12e52bdff947)",
@07/12/2014 21:04:57 [+00:00:00.0009991] }, { Q:"dbo.prc_NetMan_InstalledVirtualSwitchExtension_GetByHost(@HostID=4b67d6df-647f-4da3-a00f-12e52bdff947)", @07/12/2014 21:04:57 }, { Q:"dbo.prc_ADHC_GetHostFibreChannelVirtualSANByHostId(HostID=4b67d6df-647f-4da3-a00f-12e52bdff947)",
@07/12/2014 21:04:57 }, { Q:"dbo.prc_ADHC_AgentServer_Get(@AgentServerID=57f60b84-2997-4a25-b38e-56dc8dae19e4)", @07/12/2014 21:04:57 [+00:00:00.0010041] }, { Q:"dbo.prc_ADHC_AgentServerRelation_GetByAgent(@AgentServerID=57f60b84-2997-4a25-b38e-56dc8dae19e4)",
@07/12/2014 21:04:57 }, { Q:"dbo.prc_BTBS_HostGroup_GetByID(@ID=0e3ba228-a059-46be-aa41-2f5cf0f4b96e)", @07/12/2014 21:04:57 [+00:00:00.0009967] }, { Q:"dbo.prc_BTBS_HostGroup_GetChildGroupIDs(@ID=0e3ba228-a059-46be-aa41-2f5cf0f4b96e)",
@07/12/2014 21:04:57 }, { Q:"dbo.prc_BTBS_CustomPropertyValue_GetCPValIDByObjID(ObjectID=0e3ba228-a059-46be-aa41-2f5cf0f4b96e)", @07/12/2014 21:04:57 [+00:00:00.0009990] }, { Q:"dbo.prc_ADHC_Host_GetByGroupID(@HostGroupID=0e3ba228-a059-46be-aa41-2f5cf0f4b96e)",
@07/12/2014 21:04:57 }, { NQ:"dbo.prc_VMM_AcquireLock(@ObjectID=4b67d6df-647f-4da3-a00f-12e52bdff947, @ObjectType=VMHost, @TaskID=1ee6c6db-a399-4033-ad4b-519c0d130f52, @ReqLockType=Write)", @07/12/2014 21:04:57 [+00:00:00.0019787] }, { Q:"dbo.prc_ADHC_Host_Get(@HostID=4b67d6df-647f-4da3-a00f-12e52bdff947)",
@07/12/2014 21:04:57 [+00:00:00.0010032] }, { Q:"dbo.prc_ADHC_HealthMonitor_GetAllIDsByAgent(@AgentServerID=57f60b84-2997-4a25-b38e-56dc8dae19e4)", @07/12/2014 21:04:57 [+00:00:00.0010090] }, { Q:"dbo.prc_ADHC_HostVolume_GetIDsByHost(@HostID=4b67d6df-647f-4da3-a00f-12e52bdff947)",
@07/12/2014 21:04:57 }, { Q:"dbo.prc_BTBS_CustomPropertyValue_GetCPValIDByObjID(ObjectID=4b67d6df-647f-4da3-a00f-12e52bdff947)", @07/12/2014 21:04:57 [+00:00:00.0009875] }, { Q:"dbo.prc_ADHC_HostDisk_GetIDsByHost(@HostID=4b67d6df-647f-4da3-a00f-12e52bdff947)",
@07/12/2014 21:04:57 }, { Q:"dbo.prc_ST_StorageFileShareAssociation_GetShareIDsByServerIDAndType(@ServerID=4b67d6df-647f-4da3-a00f-12e52bdff947, @ServerType=VMHost)", @07/12/2014 21:04:57 [+00:00:00.0010157] }, { Q:"dbo.prc_ADHC_GetHostFibreChannelHbaByHostID(HostID=4b67d6df-647f-4da3-a00f-12e52bdff947)",
@07/12/2014 21:04:57 }, { Q:"dbo.prc_ADHC_GetHostSASHbaByHostID(HostID=4b67d6df-647f-4da3-a00f-12e52bdff947)", @07/12/2014 21:04:57 [+00:00:00.0009850] }, { Q:"dbo.prc_ADHC_GetHostInternetSCSIHbaByHostID(HostID=4b67d6df-647f-4da3-a00f-12e52bdff947)",
@07/12/2014 21:04:57 }, { Q:"dbo.prc_ADHC_HostGPU_GetByHost(@HostID=4b67d6df-647f-4da3-a00f-12e52bdff947)", @07/12/2014 21:04:57 }, { Q:"dbo.prc_NetMan_InstalledVirtualSwitchExtension_GetByHost(@HostID=4b67d6df-647f-4da3-a00f-12e52bdff947)",
@07/12/2014 21:04:57 [+00:00:00.0010008] }, { Q:"dbo.prc_ADHC_GetHostFibreChannelVirtualSANByHostId(HostID=4b67d6df-647f-4da3-a00f-12e52bdff947)", @07/12/2014 21:04:57 }, { Q:"dbo.prc_ADHC_HostVolume_GetByHost(@HostID=4b67d6df-647f-4da3-a00f-12e52bdff947)",
@07/12/2014 21:04:57 [+00:00:00.0009996] }, { Q:"dbo.prc_ADHC_HostDisk_GetByHost(@HostID=4b67d6df-647f-4da3-a00f-12e52bdff947)", @07/12/2014 21:04:57 }, { Q:"dbo.prc_ADHC_GetHostFibreChannelHbaByHostID(HostID=4b67d6df-647f-4da3-a00f-12e52bdff947)",
@07/12/2014 21:04:57 [+00:00:00.0009977] }, { Q:"dbo.prc_ADHC_AgentServer_Get(@AgentServerID=57f60b84-2997-4a25-b38e-56dc8dae19e4)", @07/12/2014 21:04:57 }, { Q:"dbo.prc_ADHC_AgentServerRelation_GetByAgent(@AgentServerID=57f60b84-2997-4a25-b38e-56dc8dae19e4)",
@07/12/2014 21:04:57 [+00:00:00.0010001] }, { Q:"dbo.prc_BTBS_HostGroup_GetByID(@ID=0e3ba228-a059-46be-aa41-2f5cf0f4b96e)", @07/12/2014 21:04:57 }, { Q:"dbo.prc_BTBS_HostGroup_GetChildGroupIDs(@ID=0e3ba228-a059-46be-aa41-2f5cf0f4b96e)",
@07/12/2014 21:04:57 }, { Q:"dbo.prc_BTBS_CustomPropertyValue_GetCPValIDByObjID(ObjectID=0e3ba228-a059-46be-aa41-2f5cf0f4b96e)", @07/12/2014 21:04:57 [+00:00:00.0010000] }, { Q:"dbo.prc_ADHC_Host_GetByGroupID(@HostGroupID=0e3ba228-a059-46be-aa41-2f5cf0f4b96e)",
@07/12/2014 21:04:57 }, { Q:"dbo.prc_BTBS_HostGroup_GetByID(@ID=0e3ba228-a059-46be-aa41-2f5cf0f4b96e)", @07/12/2014 21:04:57 [+00:00:00.0010018] }, { Q:"dbo.prc_BTBS_HostGroup_GetChildGroupIDs(@ID=0e3ba228-a059-46be-aa41-2f5cf0f4b96e)",
@07/12/2014 21:04:57 }, { Q:"dbo.prc_BTBS_CustomPropertyValue_GetCPValIDByObjID(ObjectID=0e3ba228-a059-46be-aa41-2f5cf0f4b96e)", @07/12/2014 21:04:57 }, { Q:"dbo.prc_ADHC_Host_GetByGroupID(@HostGroupID=0e3ba228-a059-46be-aa41-2f5cf0f4b96e)",
@07/12/2014 21:04:57 [+00:00:00.0009978] }, { Q:"dbo.prc_ADHC_AgentServer_Get(@AgentServerID=57f60b84-2997-4a25-b38e-56dc8dae19e4)", @07/12/2014 21:04:57 }, { Q:"dbo.prc_ADHC_AgentServerRelation_GetByAgent(@AgentServerID=57f60b84-2997-4a25-b38e-56dc8dae19e4)",
@07/12/2014 21:04:57 [+00:00:00.0010001] } } , conn = (SqlConnection#11f39db) { State: Open Database: VirtualManagerDB DataSource: SCVNEXT1-AK PacketSize: 8000 ServerVersion: 12.00.2000 StatisticsEnabled: False WorkstationId: SCVNEXT1-AK } }, constructionIdentity
= (WindowsIdentity#1b706b2) System.Security.Principal.WindowsIdentity }) in t:\btvsts\38525\private\product\engine\ADHC\Operations\HostRefresher\HostRefresher.cs:line 861
[s#35e07] VMRefresherBase.RunLightRefresher(this: (VMRefresherBase#[3b8]){ TBD }, dbConnection: (TransactableDbContext#[1b46])) in t:\btvsts\38525\private\product\engine\BitBoS\VmRefresher.cs:line 1178
[s#35e06] VMRefresherBase.UpdateHostAndVMs(this: (VMRefresherBase#[3b8]), refresherType: VMRefresherType.LightVMRefresher, vmObjectId: (guid) 00000000-0000-0000-0000-000000000000, tempVm: (VM) null, dbConnection: (TransactableDbContext#[1b46])) in t:\btvsts\38525\private\product\engine\BitBoS\VmRefresher.cs:line
693
[s#35ddc] VmLightRefresher.RefreshData(this: (VmLightRefresher#[1]) { tbd }, hostRef: (HostReference#[b]) { hostID = 4b67d6df-647f-4da3-a00f-12e52bdff947, hostConnectionParams = (WSManConnectionParameters#16a611e) hvnext2-ak.dev.amust.local, isClustered = False
}, dbConnection: (TransactableDbContext#[1b46])) in t:\btvsts\38525\private\product\engine\BitBoS\VmRefresher.cs:line 208
[s#35ddb] RefreshDriver`1.RefreshThreadFunction(this: (RefreshDriver`1<HostReference>#[4]) { tbd }, obj: (WaitCallbackState<HostReference>#2143066) Microsoft.VirtualManager.Engine.RefreshDriver`1+WaitCallbackState[Microsoft.VirtualManager.DB.Adhc.HostReference])
in t:\btvsts\38525\private\product\engine\Common\RefreshDriver.cs:line 568
--------------- exception.StackTrace ---------------
at System.Guid.GuidResult.SetFailure(ParseFailureKind failure, String failureMessageID, Object failureMessageFormatArgument, String failureArgumentName, Exception innerException)
at System.Guid.TryParseGuidWithDashes(String guidString, GuidResult& result)
at System.Guid.TryParseGuid(String g, GuidStyles flags, GuidResult& result)
at System.Guid..ctor(String g)
at Microsoft.VirtualManager.Engine.EngineFSUtils.GetVolumeIDFromVolumeName(String volumeName)
at Microsoft.VirtualManager.Engine.ImageLibrary.StorageDataHelper.CreateVolume(MSFT_Volume volume, MSFT_Partition partition, WsmanAPIWrapper wrapper)
at Microsoft.VirtualManager.Engine.Adhc.SMStorageRefresher.GetVolumes(IVmmDbContext ctx)
at Microsoft.VirtualManager.Engine.Adhc.WindowsHostDataProperties.PopulateProperties(IVmmDbConnection dbConnection)
at Microsoft.VirtualManager.Engine.Adhc.WindowsHostAbstractionLayer.GetHostProperties(HostData oldHostData, Version agentVersion, IVmmDbConnection dbConnection)
at Microsoft.VirtualManager.Engine.Adhc.HostRefresher.GatherAllInformation(Host host, Object agentRefreshSyncObj, Boolean checkIfClustered, Boolean refreshEventCapabilities, String& clusterName, Guid taskID, ITaskContext taskContext, IVmmDbConnection
dbConnection)
at Microsoft.VirtualManager.Engine.Adhc.HostRefresher.RefreshLockedHost(Host host, Guid taskID, ITaskContext taskContext, Boolean checkClusterStatus, IVmmDbConnection dbConnection)
at Microsoft.VirtualManager.Engine.BitBos.VMRefresherBase.UpdateHostToResponding(Nullable`1& prevState, IVmmDbConnection dbConnection)
at Microsoft.VirtualManager.Engine.BitBos.VMRefresherBase.UpdateHostState(IVMComputerSystemSummary[]& vmComputers, Nullable`1& prevState, IVmmDbConnection dbConnection)
at Microsoft.VirtualManager.Engine.BitBos.VMRefresherBase.RunLightRefresher(IVmmDbConnection dbConnection)
at Microsoft.VirtualManager.Engine.BitBos.VMRefresherBase.UpdateHostAndVMs(VMRefresherType refresherType, Guid vmObjectId, VM tempVm, IVmmDbConnection dbConnection)
at Microsoft.VirtualManager.Engine.BitBos.VMRefresherBase.UpdateHostAndVMs(VMRefresherType refresherType, IVmmDbConnection dbConnection)
at Microsoft.VirtualManager.Engine.BitBos.VmLightRefresher.RefreshData(HostReference hostRef, Nullable`1& auditTaskId, IVmmDbConnection dbConnection)
at Microsoft.VirtualManager.Engine.RefreshDriver`1.<>c__DisplayClassa.<RefreshThreadFunction>b__7(IVmmDbConnection _dbConnection)
------------- StackTrace from handler --------------
This is the call stack from where the exception was caught, not where it was thrown.
at Microsoft.VirtualManager.Utils.Diagnostics.WatsonReport.WriteReportTextFile(TextWriter reportFile)
at Microsoft.VirtualManager.Utils.Diagnostics.WatsonReport.Send()
at Microsoft.VirtualManager.Utils.Diagnostics.WatsonExceptionReport.Send()
at Microsoft.VirtualManager.Utils.Diagnostics.WatsonCenter.ReportException(Exception e, WERReportOptions options, String& localReportPath)
at Microsoft.VirtualManager.Engine.TaskRepository.TaskRepository.HandleCriticalRefresherFailure(Object sender, CriticalRefreshFailureEventArgs eventData)
at Microsoft.VirtualManager.Engine.RefreshDriver`1.<>c__DisplayClassa.<RefreshThreadFunction>b__7(IVmmDbConnection _dbConnection)
at Microsoft.VirtualManager.DB.SqlContext.Connect(Action`1 action)
at Microsoft.VirtualManager.Engine.RefreshDriver`1.RefreshThreadFunction(Object obj)
at Microsoft.VirtualManager.Utils.Multithreading.ThrottledThreadPool.<>c__DisplayClass3.<ScheduleNextThread>b__2(Object dummy)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
at System.Threading.ThreadPoolWorkQueue.Dispatch()
-------------------- Assemblies --------------------
mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.NET\Framework64\v4.0.30319\mscorlib.dll
Module=C:\Windows\Microsoft.NET\Framework64\v4.0.30319\mscorlib.dll
Version=4.5.27.0
BuildType=retail
Product=Microsoft® .NET Framework
VMMService, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\vmmservice.exe
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\vmmservice.exe
Version=3.2.9013.0
BuildType=retail
Product=System Center Virtual Machine Manager Technical Preview
System.ServiceProcess, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceProcess\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.ServiceProcess.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceProcess\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.ServiceProcess.dll
Version=4.5.27.0
BuildType=retail
Product=Microsoft® .NET Framework
System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System\v4.0_4.0.0.0__b77a5c561934e089\System.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System\v4.0_4.0.0.0__b77a5c561934e089\System.dll
Version=4.5.27.0
BuildType=retail
Product=Microsoft® .NET Framework
TraceWrapper, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\TraceWrapper.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\TraceWrapper.dll
Version=3.2.9013.0
BuildType=retail
Product=System Center Virtual Machine Manager Technical Preview
Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Utils.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Utils.dll
Version=3.2.9013.0
BuildType=retail
Product=System Center Virtual Machine Manager Technical Preview
NativeMethods, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\NativeMethods.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\NativeMethods.dll
Version=3.2.9013.0
BuildType=retail
Product=System Center Virtual Machine Manager Technical Preview
Engine.IndigoAccessLayer, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.IndigoAccessLayer.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.IndigoAccessLayer.dll
Version=3.2.9013.0
BuildType=retail
Product=System Center Virtual Machine Manager Technical Preview
Engine.Common, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Common.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Common.dll
Version=3.2.9013.0
BuildType=retail
Product=System Center Virtual Machine Manager Technical Preview
System.Core, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Core\v4.0_4.0.0.0__b77a5c561934e089\System.Core.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Core\v4.0_4.0.0.0__b77a5c561934e089\System.Core.dll
Version=4.5.27.0
BuildType=retail
Product=Microsoft® .NET Framework
System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Configuration\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Configuration.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Configuration\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Configuration.dll
Version=4.5.27.0
BuildType=retail
Product=Microsoft® .NET Framework
System.Xml, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Xml\v4.0_4.0.0.0__b77a5c561934e089\System.Xml.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Xml\v4.0_4.0.0.0__b77a5c561934e089\System.Xml.dll
Version=4.5.27.0
BuildType=retail
Product=Microsoft® .NET Framework
Errors, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Errors.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Errors.dll
Version=3.2.9013.0
BuildType=retail
Product=System Center Virtual Machine Manager Technical Preview
Remoting, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Remoting.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Remoting.dll
Version=3.2.9013.0
BuildType=retail
Product=System Center Virtual Machine Manager Technical Preview
System.Runtime.Serialization, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Runtime.Serialization\v4.0_4.0.0.0__b77a5c561934e089\System.Runtime.Serialization.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Runtime.Serialization\v4.0_4.0.0.0__b77a5c561934e089\System.Runtime.Serialization.dll
Version=4.5.27.0
BuildType=retail
Product=Microsoft® .NET Framework
System.Data, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.Net\assembly\GAC_64\System.Data\v4.0_4.0.0.0__b77a5c561934e089\System.Data.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_64\System.Data\v4.0_4.0.0.0__b77a5c561934e089\System.Data.dll
Version=4.5.27.0
Product=Microsoft® .NET Framework
System.DirectoryServices.AccountManagement, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.DirectoryServices.AccountManagement\v4.0_4.0.0.0__b77a5c561934e089\System.DirectoryServices.AccountManagement.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.DirectoryServices.AccountManagement\v4.0_4.0.0.0__b77a5c561934e089\System.DirectoryServices.AccountManagement.dll
Version=4.5.27.0
BuildType=retail
Product=Microsoft® .NET Framework
System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel\v4.0_4.0.0.0__b77a5c561934e089\System.ServiceModel.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel\v4.0_4.0.0.0__b77a5c561934e089\System.ServiceModel.dll
Version=4.5.27.0
BuildType=retail
Product=Microsoft® .NET Framework
Engine.Adhc.Operations, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Adhc.Operations.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Adhc.Operations.dll
Version=3.2.9013.0
BuildType=retail
Product=System Center Virtual Machine Manager Technical Preview
Engine.TaskRepository, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.TaskRepository.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.TaskRepository.dll
Version=3.2.9013.0
BuildType=retail
Product=System Center Virtual Machine Manager Technical Preview
ImgLibEngine, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\ImgLibEngine.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\ImgLibEngine.dll
Version=3.2.9013.0
BuildType=retail
Product=System Center Virtual Machine Manager Technical Preview
VmmHelperHost, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmHelperHost.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmHelperHost.dll
Version=3.2.9013.0
BuildType=retail
Product=System Center Virtual Machine Manager Technical Preview
VirtualizationInterfaces, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VirtualizationInterfaces.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VirtualizationInterfaces.dll
Version=3.2.9013.0
BuildType=retail
Product=System Center Virtual Machine Manager Technical Preview
NetworkServiceInterfaces, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\NetworkServiceInterfaces.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\NetworkServiceInterfaces.dll
Version=3.2.9013.0
BuildType=retail
Product=System Center Virtual Machine Manager Technical Preview
ClusterUtil, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\ClusterUtil.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\ClusterUtil.dll
Version=3.2.9013.0
BuildType=retail
Product=System Center Virtual Machine Manager Technical Preview
VMWareImplementation, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VMWareImplementation.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VMWareImplementation.dll
Version=3.2.9013.0
BuildType=retail
Product=System Center Virtual Machine Manager Technical Preview
Engine.AuthorizationManager, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.AuthorizationManager.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.AuthorizationManager.dll
Version=3.2.9013.0
BuildType=retail
Product=System Center Virtual Machine Manager Technical Preview
Engine.AuthorizationManagerTasks, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.AuthorizationManagerTasks.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.AuthorizationManagerTasks.dll
Version=3.2.9013.0
BuildType=retail
Product=System Center Virtual Machine Manager Technical Preview
Engine.Backup, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Backup.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Backup.dll
Version=3.2.9013.0
BuildType=retail
Product=System Center Virtual Machine Manager Technical Preview
Engine.BitBos, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.BitBos.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.BitBos.dll
Version=3.2.9013.0
BuildType=retail
Product=System Center Virtual Machine Manager Technical Preview
System.Management.Automation, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Management.Automation\v4.0_3.0.0.0__31bf3856ad364e35\System.Management.Automation.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Management.Automation\v4.0_3.0.0.0__31bf3856ad364e35\System.Management.Automation.dll
Version=10.0.9888.0
BuildType=retail
Product=Microsoft (R) Windows (R) Operating System
WsManWrappers, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WsManWrappers.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WsManWrappers.dll
Version=3.2.9013.0
BuildType=retail
Product=System Center Virtual Machine Manager Technical Preview
SqmWrapper, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\SqmWrapper.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\SqmWrapper.dll
Version=3.2.9013.0
BuildType=retail
Product=System Center Virtual Machine Manager Technical Preview
Engine.Deployment, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Deployment.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Deployment.dll
Version=3.2.9013.0
BuildType=retail
Product=System Center Virtual Machine Manager Technical Preview
Engine.Placement.ResourceModel, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Placement.ResourceModel.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Placement.ResourceModel.dll
Version=3.2.9013.0
BuildType=retail
Product=System Center Virtual Machine Manager Technical Preview
Engine.ImgLibOperation, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ImgLibOperation.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ImgLibOperation.dll
Version=3.2.9013.0
BuildType=retail
Product=System Center Virtual Machine Manager Technical Preview
Engine.CustomProperties, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CustomProperties.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CustomProperties.dll
Version=3.2.9013.0
BuildType=retail
Product=System Center Virtual Machine Manager Technical Preview
Engine.VmOperations, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.VmOperations.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.VmOperations.dll
Version=3.2.9013.0
BuildType=retail
Product=System Center Virtual Machine Manager Technical Preview
Engine.MomDal, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.MomDal.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.MomDal.dll
Version=3.2.9013.0
BuildType=retail
Product=System Center Virtual Machine Manager Technical Preview
System.Web.Services, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.Services\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Web.Services.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.Services\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Web.Services.dll
Version=4.5.27.0
BuildType=retail
Product=Microsoft® .NET Framework
Engine.PxeServer, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.PxeServer.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.PxeServer.dll
Version=3.2.9013.0
BuildType=retail
Product=System Center Virtual Machine Manager Technical Preview
Engine.Placement, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Placement.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Placement.dll
Version=3.2.9013.0
BuildType=retail
Product=System Center Virtual Machine Manager Technical Preview
Engine.P2VCommon, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.P2VCommon.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.P2VCommon.dll
Version=3.2.9013.0
BuildType=retail
Product=System Center Virtual Machine Manager Technical Preview
PatchExtractor, Version=0.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\PatchExtractor.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\PatchExtractor.dll
Engine.ConfigurationProviders, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ConfigurationProviders.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ConfigurationProviders.dll
Version=3.2.9013.0
BuildType=retail
Product=System Center Virtual Machine Manager Technical Preview
GatewayInterfaces, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\GatewayInterfaces.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\GatewayInterfaces.dll
Version=3.2.9013.0
BuildType=retail
Product=System Center Virtual Machine Manager Technical Preview
Microsoft.Management.Infrastructure, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.Management.Infrastructure\v4.0_1.0.0.0__31bf3856ad364e35\Microsoft.Management.Infrastructure.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.Management.Infrastructure\v4.0_1.0.0.0__31bf3856ad364e35\Microsoft.Management.Infrastructure.dll
Version=10.0.9888.0
BuildType=retail
Product=Microsoft (R) Windows (R) Operating System
Microsoft.CapacityManager.Modeling.Store.ModelLibrary, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Microsoft.CapacityManager.Modeling.Store.ModelLibrary.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Microsoft.CapacityManager.Modeling.Store.ModelLibrary.dll
Version=3.2.9013.0
BuildType=retail
Product=System Center Virtual Machine Manager Technical Preview
Engine.CustomPropertyTasks, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CustomPropertyTasks.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CustomPropertyTasks.dll
Version=3.2.9013.0
BuildType=retail
Product=System Center Virtual Machine Manager Technical Preview
Engine.UMOperation, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.UMOperation.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.UMOperation.dll
Version=3.2.9013.0
BuildType=retail
Product=System Center Virtual Machine Manager Technical Preview
Engine.Scheduler, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Scheduler.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Scheduler.dll
Version=3.2.9013.0
BuildType=retail
Product=System Center Virtual Machine Manager Technical Preview
Engine.Tasks, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Tasks.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Tasks.dll
Version=3.2.9013.0
BuildType=retail
Product=System Center Virtual Machine Manager Technical Preview
Engine.ServiceOperations, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ServiceOperations.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ServiceOperations.dll
Version=3.2.9013.0
BuildType=retail
Product=System Center Virtual Machine Manager Technical Preview
GoalState, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\GoalState.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\GoalState.dll
Version=3.2.9013.0
BuildType=retail
Product=System Center Virtual Machine Manager Technical Preview
Engine.CloudService, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CloudService.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CloudService.dll
Version=3.2.9013.0
BuildType=retail
Product=System Center Virtual Machine Manager Technical Preview
WSManAutomation, Version=3.2.9013.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WSManAutomation.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WSManAutomation.dll
wmiWrappers, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WMIWrappers.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WMIWrappers.dll
Version=3.2.9013.0
BuildType=retail
Product=System Center Virtual Machine Manager Technical Preview
Skuhelper, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Skuhelper.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Skuhelper.dll
Version=3.2.9013.0
BuildType=retail
Product=System Center Virtual Machine Manager Technical Preview
System.Transactions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.Net\assembly\GAC_64\System.Transactions\v4.0_4.0.0.0__b77a5c561934e089\System.Transactions.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_64\System.Transactions\v4.0_4.0.0.0__b77a5c561934e089\System.Transactions.dll
Version=4.5.27.0
Product=Microsoft® .NET Framework
System.EnterpriseServices, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
Location=C:\Windows\Microsoft.Net\assembly\GAC_64\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.EnterpriseServices.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_64\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.EnterpriseServices.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_64\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.EnterpriseServices.Wrapper.dll
Version=4.5.27.0
BuildType=retail
Product=Microsoft® .NET Framework
DB.DelegatedAdmin, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\DB.DelegatedAdmin.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\DB.DelegatedAdmin.dll
Version=3.2.9013.0
BuildType=retail
Product=System Center Virtual Machine Manager Technical Preview
Microsoft.CSharp, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.CSharp\v4.0_4.0.0.0__b03f5f7f11d50a3a\Microsoft.CSharp.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.CSharp\v4.0_4.0.0.0__b03f5f7f11d50a3a\Microsoft.CSharp.dll
Version=4.5.27.0
BuildType=retail
Product=Microsoft® .NET Framework
System.Numerics, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Numerics\v4.0_4.0.0.0__b77a5c561934e089\System.Numerics.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Numerics\v4.0_4.0.0.0__b77a5c561934e089\System.Numerics.dll
Version=4.5.27.0
BuildType=retail
Product=Microsoft® .NET Framework
DB.TieredPerfCounters, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\DB.TieredPerfCounters.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\DB.TieredPerfCounters.dll
Version=3.2.9013.0
BuildType=retail
Product=System Center Virtual Machine Manager Technical Preview
System.Dynamic, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Dynamic\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Dynamic.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Dynamic\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Dynamic.dll
Version=4.5.27.0
BuildType=retail
Product=Microsoft® .NET Framework
System.DirectoryServices, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.DirectoryServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.DirectoryServices.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.DirectoryServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.DirectoryServices.dll
Version=4.5.27.0
BuildType=retail
Product=Microsoft® .NET Framework
System.Management, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Management\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Management.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Management\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Management.dll
Version=4.5.27.0
BuildType=retail
Product=Microsoft® .NET Framework
--------- Extra Data for Watson Report -------------
Error Reporting Enabled=True
*** Extra Data ***
Process ID = 7204 (0x1c24)
Managed Thread ID = 74
Native Thread ID = 14652 (0x393c)
Alec King Director, Product Management @ Veeam SoftwareOn Sun, 7 Dec 2014 21:24:57 +0000, Alec 'The' King wrote:
@Paul Adare, Your replies have zero value. An apology or retraction for your accusation of piracy would have been more appropriate.
If you don't have any insight to add on the topic of this post, please stop spamming it.
I did not accuse you of anything. The build in question has been pirated
and is floating around the Internet and Microsoft has not, in fact released
the build to the general pubic. Those are facts. I have also been involved
in various TAP programs over the years and I know that there are dedicated
support channels for those programs and that you are to use those dedicated
support channels, not the support channels made available to the public
releases. Also a fact.
If you want support for your issues, the only way you're going to get
that support is what I told you. Whether you choose to avail yourself of
that support is up to you.
Paul Adare - FIM CM MVP
I've seen Sun monitors on fire off the side of the multimedia lab. I've
seen
NTU lights glitter in the dark near the Mail Gate. All these things will be
lost in time, like the root partition last week. Time to die... -- P.
Gutmann -
Changing System ID (SID) for production environments
We have had 4 cloned machines for the development of production environments but unfortunately we skipped changing the SIDs for them. Now all the 4 machines have the same SID. Though things are working fine as of now but in the near future this case might become problematic. Is there a way to change the SIDs so that the changes are reverted in the database as well ?? We tried the conventional way to change the SIDs on Demo environments but since then the systems didnt start up....Does anybody have a clue what to do??
Waiting in hope!!>Now all the 4 machines have the same SID.
What SID are you talking about ? Peoplesoft ACCESSID ? SYSADM1 ? Database ? Please clarify.
Nicolas. -
Hello,
we need to install up to 70 database servers based on SuSe linux 8 SLES.
The servers will run exactly the same configuration (same proccessors, same harddisks and partionions, ...).
The database-version will be 9.2.x.x.
We will use two harddisks running in RAID-1 mode for the OS and the database software and 4 harddisks running in RAID-5 mode for the databases.
Would it be supported to do one installation by using the standard installers (SuSe and Oracle) and cloning this installation on the other systems (e.g. by doing disk mirroring)?
Would it be supported to include the databases in this cloning-process (sid and global name of these databases will be the same)?
After cloning we would change the system specific information like IP-addresses.
Has anybody expierence in cloning OS and db software?
Does anybody know any tools which could be used to do this cloning (especially handling the RAID-5)?
Thanks in advance!
MikeHi Mike
Yes, I have experience clonning Oracle Servers and databases includes in it.
If you decide mirroring the disks you will have any problem because all the software Oracle is stored all in disk ( Configuration files and so on ).
Once you mirror the disk you have only to change.
* The host name or IP address in the listener.ora and the same in the tnsnames.ora file and that's it.
Joel Pérez
http://otn.oracle.com/experts -
Hi Hussein and Fadi,
Do you have any experience on doin Hot Backup Cloning of Oracle Apps 11.5.10.2.
Can you please share your experiencethe issue here is in the database part
i use the following steps
-run preclone
-Copy the Application tier file system (same as normal cloning)
-Copy the Database tier file system
here i put all the tablspace in backup mode
alter tablespace tablesacpe_name begin backup;
-Copy the data files
When finish the copy we have to execute the following sql statement on the source database:
-Put the database back in normal mode.
Alter tablespace tablesacpe_name end backup;
ALTER SYSTEM ARCHIVE LOG CURRENT;
-Copy Archive logs
after that you can start working in the target env. for the database you have to
-fix init.ora to reflect new paths and new sid
-start the database nomount.
-create control file manual.
-alter database mount.
-recover the database.
hope that helped
fadi -
I'm looking for a security device that can handle VLANs on the WAN side.
Like virtual WAN interfaces; one for each VLAN
I'm hoping something like the SA540 can do it.
Any suggestions?Hi,
SA500 today supports only vlan on LAN ports. vlan/sub-interfaces over WAN is not supported.
You may want to check out Cisco IOS 800 router or ASA that should support what you are looking for.
On the other hand, I am interested in understanding what you are trying to accomplish with subinterface support over WAN?
i.e. sub-interface based application service provided by local ISP? or? Feel free to send me through private message if preferred.
Regards,
Richard -
Audinate Dante Virtual Sound Card
I'm in the midst of working out a system upgrade and may have just hit a big stumbling block. I'd hoped to have this sorted out ages ago but have spent 3 of the past 4 weeks in hospital.
Presently, my interface in and out of Audition is a Yamaha DM1000 digital mixer with MY16AT ADAT card, into an MAudio Profire Lightbridge and then into/out of my audio laptop via Firewire.
It's the laptop that I need to upgrade for various reasons and I'm having an almost impossible time finding one that has the spec I need and still includes Firewire.
My fall back idea was to change the MY16AT card in my mixer to an Audinate Dante card and their "Virtual Sound Card" software. I'm close to placing an order but was just having a read today and, buried deep down in their FAQs is word that "Adobe Audition is not supported".
FYI, "Virtual Sound Card" is a system that feeds multichannel Audio in and out of a computer via ethernet and has that connection show up as an ASIO device. They list DAW software that works with Virtual Sound Card and it includes every other major piece of software--except Audtion and the proprietary side of Protools.
Does anybody know if this info is current or refers to some older versions of Audition? Anybody know why Audition might be an odd one out on compatibility with Audinate?
Anyone know a Windows based laptop that still has Firewire and has the rest of its spec suitable for audio work.
I'm depressed.Thanks for the useful thoughts.
I did indeed email Audinate with a query about why they think Audition doesn't work--and, despite waiting 4 days, have not yet received a reply. As you suggest, this bodes badly regarding any future support so I've given up on them.
As of this morning, I've ordered a laptop with the spec I want and equipped with and Expresscard slot to install my own Firewire interface. It was an order because, frankly, none of the local retailers could offer the sort of machine I wanted and all were pushing the dreaded Windows 8 at me. No thanks...I don't like the reliance on touch screen and "Metro" and I never buy an OS until SP2! I spent more than I wanted, especially since I had to get an iPad for my wife as a quid pro quo!
Anyhow, in a week or ten days I should have a blazingly fast new DAW.
Thanks Steve and Ryclark for the suggestions. -
Calculating and displaying the Length of the side of a triangle
Hi everyone. I am currently working on Dragging and Stretching a triangle on screen. Ive got it working to a certain extent but the only problem is that whenever I go to the point from which i have to drag my triangle i.e. the Left hand Corner of the BAse at exactly 300,300 it redraws a new triangle below the existing one and then when i stretch it from the top and the right it leaves a trail of triangles everytime. But when i resize my window it clears the trail only to start agian when I drag or stretch it...
All my code for wahtever I have done is displayed below. I would appreciate all the help that any one can offer.
Secondly , as I stretch my triangle I would like to calculate My Length of the hypotenuse and the other 2 sides as they change and display it in System.out.println for now...
PLEASE HELP
the code is
This is my Main Form --- Interactive Geometry.java
import java.awt.BorderLayout;
import java.awt.Container;
import java.awt.event.MouseEvent;
import java.awt.event.MouseMotionListener;
import javax.swing.JFrame;
* InteractiveGeometry.java
* Created on 30 November 2004, 20:29
* @author Kripa Bhojwani
public class InteractiveGeometry extends javax.swing.JFrame {
public EastPanel eastpanel;
public Container container;
public GeomPanel gp;
public boolean pressed = false;
public boolean pressT = false;
public boolean pressR = false;
/** Creates new form InteractiveGeometry */
public InteractiveGeometry() {
initComponents();
eastpanel = new EastPanel();
container = new Container();
Model model = new Model(300,150,450,300,300,300);
gp = new GeomPanel(model);
container = getContentPane();
container.add(eastpanel,BorderLayout.EAST);
container.add(gp,BorderLayout.CENTER);
setSize(1400,9950);
gp.addMouseMotionListener(
new MouseMotionListener() { //anonymous inner class
//handle mouse drag event
public void mouseDragged(MouseEvent me) {
setTitle("Dragging: x=" + me.getX() + "; y=" + me.getY());
public void mouseMoved(MouseEvent me) {
setTitle("Moving: x=" + me.getX() + "; y=" + me.getY());
/** This method is called from within the constructor to
* initialize the form.
* WARNING: Do NOT modify this code. The content of this method is
* always regenerated by the Form Editor.
private void initComponents() {
jMenuBar2 = new javax.swing.JMenuBar();
jMenu2 = new javax.swing.JMenu();
jMenuItem1 = new javax.swing.JMenuItem();
jMenu1 = new javax.swing.JMenu();
jMenuItem2 = new javax.swing.JMenuItem();
addMouseMotionListener(new java.awt.event.MouseMotionAdapter() {
public void mouseDragged(java.awt.event.MouseEvent evt) {
formMouseDragged(evt);
public void mouseMoved(java.awt.event.MouseEvent evt) {
formMouseMoved(evt);
addWindowListener(new java.awt.event.WindowAdapter() {
public void windowClosing(java.awt.event.WindowEvent evt) {
exitForm(evt);
jMenuBar2.setBackground(new java.awt.Color(0, 102, 204));
jMenu2.setBackground(new java.awt.Color(222, 222, 238));
jMenu2.setText("File");
jMenu2.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
jMenu2ActionPerformed(evt);
jMenuItem1.setBackground(new java.awt.Color(204, 255, 255));
jMenuItem1.setText("Exit");
jMenuItem1.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
jMenuItem1ActionPerformed(evt);
jMenu2.add(jMenuItem1);
jMenuBar2.add(jMenu2);
jMenu1.setBackground(new java.awt.Color(199, 215, 255));
jMenu1.setText("Theorem ");
jMenuItem2.setText("Pythagoras Theorem");
jMenuItem2.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
jMenuItem2ActionPerformed(evt);
jMenu1.add(jMenuItem2);
jMenuBar2.add(jMenu1);
setJMenuBar(jMenuBar2);
pack();
private void jMenuItem2ActionPerformed(java.awt.event.ActionEvent evt) {
// TODO add your handling code here:
private void formMouseDragged(java.awt.event.MouseEvent evt) {
// TODO add your handling code here:
private void formMouseMoved(java.awt.event.MouseEvent evt) {
// TODO add your handling code here:
public void mouseDragged(MouseEvent me) {
setTitle("Dragging: x=" + me.getX() + "; y=" + me.getY());
private void jMenu2ActionPerformed(java.awt.event.ActionEvent evt) {
// TODO add your handling code here:
private void jMenuItem1ActionPerformed(java.awt.event.ActionEvent evt) {
// TODO add your handling code here:
System.exit(0);
/** Exit the Application */
private void exitForm(java.awt.event.WindowEvent evt) {
System.exit(0);
* @param args the command line arguments
public static void main(String args[]) {
InteractiveGeometry ig = new InteractiveGeometry();
ig.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
ig.show();
// new InteractiveGeometry().show();
// Variables declaration - do not modify
private javax.swing.JMenu jMenu1;
private javax.swing.JMenu jMenu2;
private javax.swing.JMenuBar jMenuBar2;
private javax.swing.JMenuItem jMenuItem1;
private javax.swing.JMenuItem jMenuItem2;
// End of variables declaration
This is my Panel -- GeomPanel.java which draws everything -- /*
* GeomPanel.java
* Created on 30 November 2004, 20:29
import java.awt.*;
import java.util.*;
import javax.swing.*;
import java.awt.Graphics.*;
import java.awt.event.MouseListener;
import java.awt.event.MouseMotionListener;
import java.awt.geom.Line2D;
import java.awt.geom.Point2D;
import java.awt.event.*;
import java.awt.Graphics2D;
import java.awt.geom.Ellipse2D;
import javax.swing.event.TableModelListener;
import javax.swing.JScrollPane;
import javax.swing.event.*;
import java.awt.Dimension;
import java.awt.Container.*;
* @author Kripa Bhojwani
public class GeomPanel extends javax.swing.JPanel implements Observer, MouseMotionListener, MouseListener {
private Model model;
private boolean pressed = false;
private boolean pressT = false;
private boolean pressR = false;
/** Creates new form GeomPanel */
public GeomPanel(Model model) {
this.model = model;
model.addObserver(this);
addMouseListener(this);
addMouseMotionListener(this);
initComponents();
setBackground(Color.getHSBColor(6,600,660));
public void paintComponent(Graphics gfx) {
Graphics2D g = (Graphics2D) gfx;
Point tc = model.getTop();
Point lc = model.getLeft();
Point rc = model.getRight();
Point2D.Double p1 = new Point2D.Double(tc.getX(),tc.getY());
Point2D.Double p2 = new Point2D.Double(lc.getX(),lc.getY());
Point2D.Double p3 = new Point2D.Double(rc.getX(),rc.getY());
Line2D.Double line = new Line2D.Double(p1, p2);
Line2D.Double line1 = new Line2D.Double(p2, p3);
Line2D.Double line2 = new Line2D.Double(p1, p3);
g.setColor(Color.BLACK);
g.draw(line);
g.draw(line2);
g.draw(line1);
/** This method is called from within the constructor to
* initialize the form.
* WARNING: Do NOT modify this code. The content of this method is
* always regenerated by the Form Editor.
private void initComponents() {
setLayout(new java.awt.BorderLayout());
addMouseMotionListener(new java.awt.event.MouseMotionAdapter() {
public void mouseDragged(java.awt.event.MouseEvent evt) {
formMouseDragged(evt);
private void formMouseDragged(java.awt.event.MouseEvent evt) {
// TODO add your handling code here:
public void mouseClicked(MouseEvent e) {
public void mouseDragged(MouseEvent e) {
System.out.println("Dragged at "+ e.getX()+ "," + e.getY());
if(pressed == true){
model.setLeft(e.getX() , e.getY());
else if(pressT == true){
model.setTop(e.getX() , e.getY());
else if (pressR == true){
model.setRight(e.getX(), e.getY());
else{
pressed = false;
pressT= false;
pressR=false;
repaint();
public void mouseEntered(MouseEvent e) {
public void mouseExited(MouseEvent e) {
public void mouseMoved(MouseEvent e) {
System.out.println("Mouse at " + e.getX() +"," + e.getY());
public void mousePressed(MouseEvent e) {
if (model.getLeft().getX()== e.getX() && model.getLeft().getY()== e.getY()){
pressed = true;
else if (model.getTop().getX()==e.getX() && model.getTop().getY()==e.getY()){
pressT = true;
else if(model.getRight().getX() == e.getX() && model.getRight().getY()==e.getY()){
pressR = true;
// else if(model.getCircle().getX() == e.getX() && model.getCircle().getY() == e.getY()){
// inoval = true;
else {
pressed =false;
pressT = false;
pressR = false;
} repaint();
public void mouseReleased(MouseEvent e) {
if(pressed == true){
model.setLeft(e.getX(),e.getY());
else if (pressT ==true ){
model.setTop(e.getX(), e.getY());
else if(pressR ==true){
model.setRight(e.getX(),e.getY());
else {
pressed = false;
pressT = false;
pressR = false;
repaint();
public void update(Observable o, Object arg) {
repaint();
// Variables declaration - do not modify
// End of variables declaration
This is my Model class called Model.java which Holds all teh data for my triangle
import java.awt.Point;
import java.util.Observable;
* Model.java
* Created on 05 December 2004, 14:11
* @author Kripa Bhojwani
public class Model extends Observable{
private int x1,x2,x3, y1,y2,y3;
private int _transx;
private int _transy;
private int _c;
private int _d;
/** Creates a new instance of Model */
public Model(int x1, int y1, int x2, int y2, int x3, int y3) {
this.x1 = x1;
this.y1 = y1;
this.x2 = x2;
this.y2 = y2;
this.x3 = x3;
this.y3 = y3;
setChanged();
notifyObservers();
public void setTop(int x1, int y1){
//this.x1 =x1;
this.y1= y1;
setChanged();
notifyObservers();
public void setRight(int x2, int y2){
this.x2 = x2;
// this.y2 =y2;
setChanged();
notifyObservers();
public void setLeft(int x3, int y3){
_transx = x3 - this.x3;
_transy = y3 - this.y3;
this.x3 += _transx;
this.y3 += _transy;
this.y2 += _transy;
this.x2 += _transx;
this.x1 += _transx;
this.y1 += _transy;
setChanged();
notifyObservers();
public Point getTop(){
Point p = new Point(x1,y1);
return p;
public Point getRight(){
Point p1 = new Point(x2,y2);
return p1;
public Point getLeft(){
Point p3 = new Point(x3,y3);
return p3;
public void update() {
setChanged();
notifyObservers();
This is my TableModel which is the JTable to display all the Cordinates and Lengths and other Measurements like angles etc./*
* TableModel.java
* Created on 03 December 2004, 15:08
import javax.swing.JTable;
import javax.swing.JScrollPane;
import javax.swing.JPanel;
import javax.swing.JFrame;
import java.awt.*;
import java.awt.event.*;
import java.util.Observer;
import javax.swing.event.TableModelEvent;
import javax.swing.table.AbstractTableModel;
* @author Kripa Bhojwani
public class TableModel extends AbstractTableModel implements Observer{
private String[] columnNames = {"Point", "X Coordinate", "Y Coordinate"};
private Object[][] data = {};
private int rowCount;
private int columnCount;
/** Creates a new instance of TableModel */
public TableModel() {
rowCount = 0;
columnCount = 3;
public int getColumnCount() {
return columnCount;
public int getRowCount() {
return rowCount;
public String getColumnName(int col) {
return columnNames[col];
public void setColumnName (String[] name){
columnNames = name;
public void setValueAt(Object obj, int row, int col) {
data[row][col] = obj;
fireTableCellUpdated(row, col);
TableModelEvent tme = new TableModelEvent(this);
fireTableChanged(tme);
public Object getValueAt(int row, int col) {
return data[row][col];
public void update(java.util.Observable o, Object arg) {
This is the Panel on the east side of My Main application form which will display all the measurements and Cordinates ---EastPanel.java
import java.awt.BorderLayout;
import javax.swing.JScrollPane;
import javax.swing.JTable;
import javax.swing.event.TableModelListener;
import java.awt.Dimension;
* EastPanel.java
* Created on 04 December 2004, 23:07
* @author Kripa Bhojwani
public class EastPanel extends javax.swing.JPanel implements TableModelListener{
private TableModel tm;
/** Creates new form EastPanel */
public EastPanel() {
initComponents();
tm = new TableModel();
JTable table1 = new JTable(tm);
table1.setPreferredScrollableViewportSize(new Dimension(250,264));
table1.getModel().addTableModelListener(this);
JScrollPane sp = new JScrollPane(table1);
add(sp,BorderLayout.EAST);
/** This method is called from within the constructor to
* initialize the form.
* WARNING: Do NOT modify this code. The content of this method is
* always regenerated by the Form Editor.
private void initComponents() {
setLayout(new java.awt.BorderLayout());
public void tableChanged(javax.swing.event.TableModelEvent e) {
// Variables declaration - do not modify
// End of variables declaration
}import java.awt.*;
import java.awt.event.*;
import java.awt.geom.*;
import java.text.NumberFormat;
import javax.swing.*;
import javax.swing.event.*;
import javax.swing.table.DefaultTableCellRenderer;
public class G
public G()
TriangleModel tri = new
ri = new TriangleModel(175,100,175,250,325,250);
TriangleView view = new TriangleView(tri);
JFrame f = new JFrame();
f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
f.getContentPane().add(view.getUIPanel(),
Panel(), "North");
f.getContentPane().add(view);
f.getContentPane().add(view.getTablePanel(),
Panel(), "South");
f.setSize(500,500);
f.setLocation(200,200);
f.setVisible(true);
public static void main(String[] args)
new G();
class TriangleModel // (x1,
y1)
{ // |\
static final int SIDES = 3; // | \
private int cx, cy; // |
| \
Polygon triangle; // |_
|_ _\ (x3, y3)
int selectedIndex; // (x2,
(x2, y2)
NumberFormat nf;
Line2D[] medians;
Point2D centroid;
public TriangleModel(int x1, int y1, int x2, int
int y2, int x3, int y3)
int[] x = new int[] { x1, x2, x3 };
int[] y = new int[] { y1, y2, y3 };
triangle = new Polygon(x, y, SIDES);
nf = NumberFormat.getNumberInstance();
nf.setMaximumFractionDigits(1);
public boolean contains(Point p)
// Polygon.contains doesn't work well enough
return (new Area(triangle)).contains(p);
public boolean isLineSelected(Rectangle r)
Line2D line = new Line2D.Double();
for(int j = 0; j < SIDES; j++)
int[] x = triangle.xpoints;
int[] y = triangle.ypoints;
int x1 = x[j];
int y1 = y[j];
int x2 = x[(j + 1) % SIDES];
int y2 = y[(j + 1) % SIDES];
line.setLine(x1, y1, x2, y2);
if(line.intersects(r))
selectedIndex = j;
return true;
selectedIndex = -1;
return false;
* Only works for right triangle with right angle
angle at (x2, y2)
public void moveSide(int dx, int dy, Point p)
int[] x = triangle.xpoints;
int[] y = triangle.ypoints;
switch(selectedIndex)
case 0:
x[0] += dx;
x[1] += dx;
break;
case 1:
y[1] += dy;
y[2] += dy;
break;
case 2:
double rise = y[2] - y[0];
double run = x[2] - x[0];
double slope = rise/run;
// rise / run == (y[2] - p.y) / (x[2]
] - p.y) / (x[2] - p.x)
x[2] = p.x + (int)((y[2] - p.y) /
)((y[2] - p.y) / slope);
// rise / run == (p.y - y[0]) / (p.x
y - y[0]) / (p.x - x[0])
y[0] = p.y - (int)((p.x - x[0]) *
)((p.x - x[0]) * slope);
public void translate(int dx, int dy)
triangle.translate(dx, dy);
public Polygon getTriangle()
return triangle;
public String findCentroid()
int[] x = triangle.xpoints;
int[] y = triangle.ypoints;
// construct the medians defined as the line
the line from
// any vertex to the midpoint of the opposite
opposite line
medians = new Line2D[x.length];
for(int j = 0; j < x.length; j++)
int next = (j + 1) % x.length;
int last = (j + 2) % x.length;
Point2D vertex = new Point2D.Double(x[j],
Double(x[j], y[j]);
// get midpoint of line opposite vertex
double dx = ((double)x[last] -
le)x[last] - x[next])/2;
double dy = ((double)y[last] -
le)y[last] - y[next])/2;
Point2D oppLineCenter = new
Center = new Point2D.Double(x[next] + dx,
y[next]
y[next] + dy);
medians[j] = new Line2D.Double(vertex,
uble(vertex, oppLineCenter);
// centroid is located on any median 2/3 the
2/3 the way from the
// vertex (P1) to the midpoint (P2) on the
) on the opposite side
double[] lengths = getSideLengths();
double dx = (medians[0].getX2() -
etX2() - medians[0].getX1())*2/3;
double dy = (medians[0].getY2() -
etY2() - medians[0].getY1())*2/3;
double px = medians[0].getX1() + dx;
double py = medians[0].getY1() + dy;
//System.out.println("px = " + nf.format(px)
rmat(px) +
// "\tpy = " +
py = " + nf.format(py));
centroid = new Point2D.Double(px, py);
return "(" + nf.format(px) + ", " +
", " + nf.format(py) + ")";
public String[] getAngles()
double[] lengths = getSideLengths();
String[] vertices = new
es = new String[lengths.length];
for(int j = 0; j < lengths.length; j++)
int opp = (j + 1) % lengths.length;
int last = (j + 2) % lengths.length;
double top = lengths[j] * lengths[j] +
lengths[last] *
lengths[last] * lengths[last] -
lengths[opp] *
lengths[opp] * lengths[opp];
double divisor = 2 * lengths[j] *
lengths[j] * lengths[last];
double vertex = Math.acos(top /
h.acos(top / divisor);
vertices[j] =
ertices[j] = nf.format(Math.toDegrees(vertex));
return vertices;
public String[] getLengths()
double[] lengths = getSideLengths();
String[] lengthStrs = new
rs = new String[lengths.length];
for(int j = 0; j < lengthStrs.length; j++)
lengthStrs[j] = nf.format(lengths[j]);
return lengthStrs;
public String[] getSquares()
double[] lengths = getSideLengths();
String[] squareStrs = new
rs = new String[lengths.length];
for(int j = 0; j < squareStrs.length; j++)
squareStrs[j] = nf.format(lengths[j] *
lengths[j] * lengths[j]);
return squareStrs;
private double[] getSideLengths()
int[] x = triangle.xpoints;
int[] y = triangle.ypoints;
double[] lengths = new double[SIDES];
for(int j = 0; j < SIDES; j++)
int next = (j + 1) % SIDES;
lengths[j] = Point.distance(x[j], y[j],
(x[j], y[j], x[next], y[next]);
return lengths;
class TriangleView extends JPanel
private TriangleModel model;
private Polygon triangle;
private JTable table;
private JLabel centroidLabel;
private boolean showConstruction;
TriangleControl control;
public TriangleView(TriangleModel model)
this.model = model;
triangle = model.getTriangle();
showConstruction = false;
control = new TriangleControl(this);
addMouseListener(control);
addMouseMotionListener(control);
public void paintComponent(Graphics g)
super.paintComponent(g);
Graphics2D g2 = (Graphics2D)g;
g2.setRenderingHint(RenderingHints.KEY_ANTIALIASING,
RenderingHints.VALUE_ANTIALIAS_ON);
g2.draw(triangle);
if(model.medians == null)
centroidLabel.setText("centroid location:
id location: " + model.findCentroid());
// draw medians and centroid point
if(showConstruction && !control.dragging)
g2.setPaint(Color.red);
for(int j = 0; j < 3; j++)
g2.draw(model.medians[j]);
g2.setPaint(Color.blue);
g2.fill(new
g2.fill(new Ellipse2D.Double(model.centroid.getX() -
2,
model.centroid.getY()
model.centroid.getY() - 2, 4, 4));
public TriangleModel getModel()
return model;
public JTable getTable()
return table;
public JLabel getCentroidLabel()
return centroidLabel;
public JPanel getUIPanel()
JCheckBox showCon = new JCheckBox("show
ox("show construction");
showCon.addActionListener(new
ener(new ActionListener()
public void actionPerformed(ActionEvent
(ActionEvent e)
boolean state =
boolean state =
((JCheckBox)e.getSource()).isSelected();
showConstruction = state;
repaint();
JPanel panel = new JPanel();
panel.add(showCon);
return panel;
public JPanel getTablePanel()
String[] headers = new String[] { "", "", "",
// row and column data labels
String[] rowHeaders = {
"sides", "lengths", "squares", "angles",
", "angles", "degrees"
String[] sidesRow = { "vertical",
rtical", "horizontal", "hypotenuse" };
String[] anglesRow = { "hyp to ver", "ver to
"ver to hor", "hor to hyp" };
// collect data from model
String[] angles = model.getAngles();
String[] lengths = model.getLengths();
String[] squares = model.getSquares();
String[][] allData = { sidesRow, lengths,
lengths, squares, anglesRow, angles };
int rows = 5;
int cols = 4;
Object[][] data = new Object[rows][cols];
for(int row = 0; row < rows; row++)
data[row][0] = rowHeaders[row];
for(int col = 1; col < cols; col++)
data[row][col] = allData[row][col -
lData[row][col - 1];
table = new JTable(data, headers)
public boolean isCellEditable(int row,
ble(int row, int col)
return false;
DefaultTableCellRenderer renderer =
(DefaultTableCellRenderer)table.getDefaultRenderer(St
ring.class);
renderer.setHorizontalAlignment(JLabel.CENTER);
centroidLabel = new JLabel("centroid
centroid location: ", JLabel.CENTER);
Dimension d =
sion d = centroidLabel.getPreferredSize();
d.height = table.getRowHeight();
centroidLabel.setPreferredSize(d);
JPanel panel = new JPanel(new
anel(new BorderLayout());
panel.setBorder(BorderFactory.createTitledBorder("tri
angle data"));
panel.add(table);
panel.add(centroidLabel, "South");
return panel;
class TriangleControl extends MouseInputAdapter
TriangleView view;
TriangleModel model;
Point start;
boolean dragging, altering;
Rectangle lineLens; // used for line
line selection
public TriangleControl(TriangleView tv)
view = tv;
model = view.getModel();
dragging = altering = false;
lineLens = new Rectangle(0, 0, 6, 6);
public void mousePressed(MouseEvent e)
Point p = e.getPoint();
lineLens.setLocation(p.x - 3, p.y - 3);
// are we over a line
if(model.isLineSelected(lineLens))
start = p;
altering = true;
// or are we within the triangle
else if(model.contains(p))
start = p;
dragging = true;
public void mouseReleased(MouseEvent e)
altering = false;
dragging = false;
view.getCentroidLabel().setText("centroid
centroid location: " +
model.findCentroid());
view.repaint(); // for the construction
truction lines
public void mouseDragged(MouseEvent e)
Point p = e.getPoint();
if(altering)
int x = p.x - start.x;
int y = p.y - start.y;
model.moveSide(x, y, p);
updateTable();
view.repaint();
start = p;
else if(dragging)
int x = p.x - start.x;
int y = p.y - start.y;
model.translate(x, y);
view.repaint();
start = p;
private void updateTable()
String[] lengths = model.getLengths();
String[] squares = model.getSquares();
String[] angles = model.getAngles();
JTable table = view.getTable();
for(int j = 0; j < angles.length; j++)
table.setValueAt(lengths[j], 1, j + 1);
table.setValueAt(squares[j], 2, j + 1);
table.setValueAt(angles[j], 4, j + 1);
view.getCentroidLabel().setText("centroid
centroid location: " +
model.findCentroid());
Hey sorry mate.. ive got a nother problem.
I need to add loads of theorems to this tool. so i need a JMenu Bar called File with all the normal things. then another Menu called Theorems where i can have a list of JMenuItems with the theorem names --- Like when they click on Pythagoras Theorem it opens up all the triangle and the traingle data that u helped me with.
The thing is im using netbeans and in netbeans i can do it coz its there and all you got to do is put the components together.
Please Help
Thanks...
Sharan
Maybe you are looking for
-
Weblogic.jndi.WLContext.PIN_TO_PRIMARY_SERVER == "true" not helping...
Hi, In cluster there are 2 NT boxes. All beans are deployed evenly on both the machines. m/c A session bean SB1 is doing lookup for the same session bean SB1 on m/c 2. The problem is it's getting the
-
HT204379 Is it possible to reset or delete the screen saver preferences for default?
When I go to change my screen saver preferences it asks me to log into my server before it shows me my photo options, I was wondering if there was a way to reset that so it didn't pop up each time I go to screen saver preferences.
-
Dyn-loading with newInstance() vs. static ref
Hello. Here is code that does what I want: Class.forName("com.mysql.jdbc.Driver").newInstance(); // load mysql/jdbc driver Connection conn = DriverManager.getConnection("jdbc:mysql://ebi:3306/jlpt", "root", "pwd"); // conn is good-to-go ....Regardin
-
Error launching Robohelp HTML 6 (Build 099)
The following error message keeps appearing every time I launch Robohelp 6. I'm completely new to this software and I'm learning it myself (no training). Can someone please advise or help me? "Unable to register hhctrl.ocx, itiss.dll, HHActiveX.dll,
-
All iCloud data gone from phone?
My phone is connected to my iCloud account (I double checked in settings) yet all my iCloud data is gone. My notes are all deleted, all my calendar events are gone, and I am unable to add new calendar events. I have important events stored on there