Changin virtual machine OS but keeping the same public IP
I need to change the OS from my vm but I need to keep the same IP, because some organization's firewalls are already configure to allow that ip, and it takes too long to ask them that allow other ip. is there a way to do this? thanks a lot!!!!!!
Hi,
If you talked about the public IP address, then you can do as Manesh said to use a reserved IP address. Or if you have other VMs in the same cloud service, it is also possible to do that. You just need to make sure that not all the VMs in the cloud service
are in the stopped(deallocated) status, then the public IP address of the cloud service won't be changed.
However, it is recommended to use a researved IP address as the researved IP address will not change even when VMs in the cloud service are stop/deallocated.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Similar Messages
-
How do I rescale artboard and content, but keep the same path width
Hi,
I have a project with a lot of artboards with content set-up inside each artboard - actually a series of icons.
I'd like to resize all of the artboards and the content, keeping the same line widths.
I can use the 'save for web' feature to scale the existing artboards/content, but I don't want the line widths to be scaled too.
I have failed to find a script or feature that would allow me to do this and save me from manually resizing every artboard and the content.
I'll immediately hold my hands up to having a minimalist knowledge of illustrator.
Any thoughts? I'm surprised it's not a feature of 'save for web'.
Currently using CS6.
Thanks,
PaulNo, rescaling the paths inside illustrator keeps the path width the same. It's the 'export for web' dialog upscaling the content is also upscaling the path widths. I can understand why it does that, but surprised it it ignores the scaling strokes option and doesn't provide that option itself.
Thanks for the suggestion, though. -
I need to change my image file size but keep the same pixels. Possible?
I'm trying to upload an image to a mobile ad platform (Adfonic) with the following requirements: Image dimensions 216 x 36 pixels; max file size 3.0 kb; file formats supported GIF, JPG, PNG. I figured out how to change the pixel size but now my file is too big. I have Photoshop CS4 Extended & Vista.
I changed the file resolution but then the pixel size changes. What can I do?
Thanks!Save-As, JPEG offers you a quality slider. You trade quality for size. This still wouldn't give you what you needed?
You could try JPEG 2000, but beware, it's not as compatible with as many things, and it can look kind of weird, but boy does it compress...
-Noel -
My daughter shares my apple id on her ipod touch. i recently got an i pad and now i'm getting all of her instant messages and face time calls. Is there a way to change her contact information for those two areas so i don't get them on my i pad but keep the same apple id for purchases? Thank you
See:
MacMost Now 653: Setting Up Multiple iOS Devices For Messages and FaceTime -
How do I separate my daughters devices from my icloud but use the same apple itunes account?
How can I separate my daughters icloud account but keep the same apple itunes account?
To migrate her device to a new account, start by saving any photo stream photos she keep to keep to your camera roll (unless already there) by opening your my photo stream album, tapping Select, tapping the photos, tap the share icon (box with upward facing arrow), then tapping Save to Camera Roll. If she is syncing any notes with iCloud that she wants to keep on her device, you'll need to open each of them and email them to her so she can later copy and paste the text into new notes created in her new account. Then go to Settings>iCloud, tap Delete Account (which only deletes it from this device, not from iCloud; your devices won't be effected by this), choose Keep on My iDevice and provide the password when prompted. Then sign back in with a different Apple ID to create her new account and choose Merge to upload her data. (If she has multiple devices, she can go through this same process on the others, but choose Delete from My iDevice when prompted as the data has now already been migrated to the new account.)
Once you are both on separate accounts you can each go to icloud.com and delete the other person's data from your account if you need to.
You can continue to share the same iTunes ID. The ID used for iCloud does not need to be the same as the ID used for iTunes. -
How to archive my photos from IPhoto to keep the same filing structure
I need to empty my iphoto files as there is too much memory being taken up. i want to export to external hard drive but keep the same filing system so i can access my photos rapidly. every attempt I have made to date mixes all the photos up so there is no structure. help please.
I need to empty my iphoto files as there is too much memory being taken up.
No, iPhoto files take up disk space, not memory. So if you think you're going to save memory be getting rid of them, you need to reconsider that idea.
You can move your entire iPhoto Library to an external drive and import new photos into it on that drive, so if that's what you want to do, these are the steps:
1. Format the external drive as Mac OS Extended (Journaled)
2. Quit iPhoto
3. Copy the iPhoto Library from your Pictures Folder to the External Disk.
4. Hold down the option key while launching iPhoto. From the menu select 'Choose Library' and navigate to the new location. From that point on itl be the default location of your library.
5. Test the new library destination and when you're sure everything is as it should be, delete it on your Macintosh HD. -
We have a 10 person office - all either use Acrobat XI or Reader XI. One person is on Windows 7. The rest are on Windows 8 (not 8.1). I say this because I thought it was a Windows 8 issue, but having the same problems on the Windows 7 machine. We are all having problems opening pdf's sent to us from other firms. This has increased in frequency over the past two months. We've checked with the various firms, and their other clients are not having problems. Some pdfs open but with a lot of missing content and strange formatting, others won't open at all. There are different error messaged depending upon the doc. Some are regarding the fonts, for example "can't extract the embedded font...." Others are "insufficient data" errors. There are more, but for purposes of keeping this short, I won't include them. Another unrelated issue is that we are having trouble printing excel files to pdf. The files end up with bad formatting. I've worked with adobe "chat" support, our IT consultants with no resolution. I also haven't found any similar "known issue" online Would very much appreciate any assistance. Thank you
The font embedding can be a problem if not done and you are trying to view the PDF and do not have the font on your machine. Acrobat will often try to find a replacement, but it is not always a good choice. Sometimes the "Use Local Fonts" button can be changed in state to resolve some of the viewing issues.
If you are trying to copy or export info, then it is important that you have the fonts on your system. Otherwise, the message you are getting about embedded fonts would not be showing up.
As for Excel formatting, be sure that the Adobe PDF printer is selected in the printer screen before you look for the paging and formatting of the file. In most OFFICE programs, if you change the printer the application will reflow the document to best match the printer (called "using printer metrics"). So check before you create the PDF that the layout is correct. -
I am wanting to replace a 2003 (not R2) File Server with a 2012R2 file server and preferably keep the same machine name and IP when finished. For the moment I just need some "high level" guidance, little details can be worked out once I know
which direction I will go. I was considering that DFS might be a way to help get through the process although when finished the 2012R2 Files server will be by itself with no other file server planned at this time. DFS can stay installed for maybe
future purposes but clearly I wouldn't need the DFS Replication with only one machine.
Here's a few details of the environment....
1. DC's are 2012R2 but it is still 2003 DFL because the old 2003 DCs are still present. But likely they will be gone and the DFL elevated before I start on the File Server project
2. Nearly all machines in the facility have a shortcut on the "All Users" Desktop that points to the existing old File Server. Editing or replacing that shortcut would be a major pain,...hence why I want to keep the same machine name at least,
and maybe the same IP if not too much trouble. This way the existing shortcut would continue to work with the new 2012R2 File Server. The UNC path represented in that shortcut is also configured into one or more of our major business applications,
futher emphasizing the need to keep the UNC path the same throughout the process.
3. The facility runs 24/7/365 but is "light" on weekends. The political environment is such that there is little to no tolerance for any down time at all.
4. Would DFS (based from the 2012R2 machine) be a good tool to get where I need to go?
Thanks for any suggestions.
Phillip WindellHi Sharon,
I've done some more reading and have a few new ideas to run past you....
Yes regular DFS wouldn't help and the Namespace would still be different than how it was with just the old server. However I was thinking DFS Replication could replace the purpose of RoboCopy and it would keep the two locations "in sync" until I was ready
to flip over to the new server. DFS Rep can exist independently of a DFS Namespace, so a Namespace is not even needed. It needs a minimum of 2003R2 for the "later & better" DFS Rep but I believe 2003 can do an "in place" upgrade to 2003R2, so I would upgrade
the old server to 2003R2 first. As long as the DFS Rep on 2012R2 and 2003R2 will properly interact I think that will work.
Thanks for the reg info on the Shares. I'm debating if editing that would reg file would really be much better than manually creating the Shares on the new server while the DFS Replication was doing its job. I'll probably export that Key as a
safety move whether I use it or not.
Once the DFS Rep is fully in sync and the Shares are in place on the new server, I figure I would then:
1. Remove the DFS Replication Object (optionally remove DFS Services completely)
2. Rename the old File Server to something else and set it to DHCP
3. Rename the new File Server to the name I want to use and give it the IP the old server had.
How does that sound?
Phillip Windell -
Trying to redeem a free download for a song from KLove. When I get into my acct & try to redeem it, it just keeps bringing up the "sign-in" box. When I click the button on KLove's webpage to redeem it takes me to that page but does the same thing
Get the redeem code from the KLove page:
http://www.klove.com/music/store.aspx
...and enter it into the Redeem Code box in the iTunes Store.
You will have to sign in to your iTunes account.
It worked fine here. If that doesn't work for you, let us know what went wrong. -
My itunes account was set up under an email account that has been deleted. I started a new i tunes account but have the same device as with the old account. How do i keep my music thats on my ipod touch from being deleted whin i sync it to itunes after purchasing new music?
I have the same problem (deleted email account). I think I mistakenly set up an account when I was buying an Apple product online, not realizing that it would be the same ID as my iTunes.
What is the way to actually contact Apple?
I have been clicking around in circles for hours! Will I have to pay them to resolve this? I don't have any products still have applecare . . . -
I created my Apple ID in Ireland, but would now like to switch to a German Apple ID, keeping the same email address. How do I delete my old Irish Apple ID, so I can create a new German one with the same email?
Welcome to the Apple Community.
Click on your account name in the top right corner of the iTunes store in the iTunes application on your computer, enter your password and click the "view account" button. Navigate to the Apple ID summary where you have the option to "change country or region".
In order to change your location, you will need a credit card registered to an address in the location you are trying to change to.
You cannot change your location if you have credit on your account, if you are unable to spend your credit and leave a balance of zero, contact Apple, which you can do through iTunes Store Support. -
I have two macs at my house, and multiple iPhones. I want to keep the same apple id as everyone else, but i want to put my own music only on my iPhone. I want to do this with my laptop which is not the family's main iTune's computer.
If you use the same Apple ID for iCloud on each device, yes. However, you can use the same Apple ID for iTunes content on each device, but different Apple ID's for iCloud, iMessage, FaceTime, etc., on each device. That way, you can have whatever iTunes content you want on each phone, but keep all of the other data separate. You can create another Apple ID here:
https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/wa/createAppleId?loca lang=en_US
Must be a verified email address. -
I wish to move my time machine copies to a new HD, but keeping the old backups in the new time machine HD. The new HD format is Mac OS Plus (with register). When I dragg the backups.backuodb file to the new HD I got an error message "The uppercase and lowercas of the volume....".
Please helpSee Pondini's TM FAQs, for details.
-
My Time Capsule keeps saying "backup failed" due to the network password not being correct. I have not changed my password and every day I have to type the same one in and then it works. But then the same thing happens the next day. Can anyone help? This only started doing this about 2 weeks ago.
Hello,
Mac OS X 10.4 Help, I forgot a password in my Keychain
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1960.html
Resetting your keychain in Mac OS X...
If Keychain First Aid finds an issue that it cannot repair, or if you do not know your keychain password, you may need to reset your keychain.
http://support.apple.com/kb/TS1544
Open Keychain Access in Utilities, use Keychain First Aid under the Menu item, then either check the Password under that item, change it, or delete it and start over. -
Migrate Active Directory 2008 to 2012 but need to keep the same ip address and server name
Hi,
Current setup is 2 DCs in one site running 2008 R2 AD.
We are planning to migrate from 2008 R2 to 2012 R2 but need to keep the same ip address and server name. I have came up two plans to do this and hope someone can tell me which one would be the best approach. What is the pros
and cons in Plan A and B or may be plan C if there is a better one?
First, I was planning to do plan A but just had a second thought of Plan B. My concern in Plan A is about changing the server name when the new 2012 R2 already running as DC. Plan B would be changing all the old server
name and ip before they become member sever and DC.
Any information and suggestion would be very appreciated.
Plan A
Run adprep /forestprep on 2008 R2 DC
Build a new 2012 R2 server and promote it as 3rd DCs in current Domain
Transfer FSMO from 2008 R2 to 2012 R2
Run Repadmin /syncall to force replication
Rename the demoted 2008 R2 DC to something else
Change the demoted 2008 R2 ip address to something else
Restart the demoted 2008 R2 server to take effect
Now, run Netdom computername command to change the new 2012 R2 server name to the old 2008 R2 DC server name
Change the new 2012 R2 DC's ip to old 2008 R2 DC's ip
Run ipconfig /flushdns
Run ipconfig /registerdns
DCDIAG to see any error
Plan B
Build 2 new 2012 R2 standalone servers
In 2008 R2 ServerA transfer FSMO to 2008 R2 ServerB
Demote 2008 R2 ServerA to become member server
Rename 2008 R2 ServerA to something else and change the ip address to something else and shut it down
Now, rename one of the new 2012 R2 standalone server to the old demoted 2008 R2 ServerA name
Change the new 2012 R2 standalone server ip to the old demoted 2008 R2 ServerA's ip address
Add the new 2012 R2 standalone server (now with the old 2008 R2 ServerA name and ip) to become member server
Run adprep /forestprep on the 2008 R2 ServerB
Promote the new 2012 R2 (now with the old 2008 R2 ServerA name and ip) as DC
Transfer 2008 R2 ServerB FSMO to the new 2012 R2 DC (now with the old 2008 R2 ServerA name and ip)
Demote 2008 R2 ServerB as member server
Rename 2008 R2 ServerB to something else and change the ip address to something else and shut it down
Now, rename the 2nd new 2012 R2 standalone server to the old demoted 2008 R2 ServerB name
Change the new 2012 R2 standalone server ip to the old demoted 2008 R2 SeverB 's ip address
Add the 2nd new 2012 R2 standalone server to become member server
Promote it as DC
Run DCDIAG to check error
Thanks.Hi,
Renaming a Domain Controller is a risky operation which may lead to issues, therefore, I would suggest you go with the Plan B, rename the server before it becomes DC.
Here is a blog below which could be helpful to you:
Remove an Old DC and Introduce a New DC with the Same Name and IP Address
http://blogs.msmvps.com/acefekay/2010/10/09/remove-an-old-dc-and-introduce-a-new-dc-with-the-same-name-and-ip-address/
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Maybe you are looking for
-
Power Manager 4.42 Not Working T61p Vista 64-bit
ThinkVantage Power Manager is not working on my machine. I first noticed this after System Update added several new ThinkVantage programs, including PM version 4.41a several weeks ago, but I can't point with any certainty a specific cause or beginni
-
How to give explicit with to HSlider. I want its width more then 10000
When I am giving width to slider more then 10000, then I am not getting slider up to that width. any Solution?.
-
Form Guide - Nested Optional Panels questions translations
Hi! I'm developping a multi language form guide. Thanks to the Paul's workaround, I'm able to translate the field caption. But I cannot find a solution to translate the questions/answers in nested optional panels. Does somebody know a way to do that?
-
What is the displayName attribute in mx:PieSeries
I'm using PieChart and try to use the displayName in mx:PieSeries to set a label for datatip, but nothing is shown up. What is displayName for?
-
Use automator to copy ical to 2nd calendar
Hi, I have multiple calendars in iCal, but I would like to copy all appointments to my google calendar. I am trying to use Automator to do this, but that does not work (without help) Who can show me hoe to do this? Thanks, Ludo