Changing "2 Outputs" to "1 Stereo" To Match Sequence and Clips

I'm using Final Cut Pro 6.0.4 on a Macbook Pro. I initially posted this question on the wrong forum I think (Final Cut Pro X) but can't figure out how to just move it here, so I am posting it here.
My footage is:
1440x810, 29.7 fps, MPEG-4 Video Compressor, 44.1 KHz aud rate, 32-bit floating point.
The audio is set at "1 stereo."
My sequence is:
1440x810, 29.7 fps, MPEG-4 Video Compressor, 44.1 KHz aud rate, 32-bit floating point.
The audio is set at "2 outputs."
When I drop footage into the sequence, it says the audio needs to be rendered. The only thing that doesn't match between the sequence and the footage is the Audio Outputs. I did select to have my sequence match clip settings when prompted. I've looked through sequence settings and nothing changed it, and  I cannot for the life of me figure out how to change "2 outputs" to "1 stereo" (or vice versa) without having to re-compress all the footage and then re-import it.
I also tried the "Match Audio Outputs" command, but nothing changed when I did that either.
I have this problem every time I edit and usually just resort to re-compressing the footage, but that can take days and I'd like to avoid that.
Am I missing something?

I didn't record the footage, I'm just the editor. I can ask Julie & Brandy (the people in the video) what camera they used if that's important, though? They sent it to me as mov files on a disc.
These are the clip properties (is this visible? it looks so small in my window but the screenshot i took is way larger, hopefully it will expand)
These are the sequence properties:
Also, even though it says 16-bit there, it says 32-bit on the browser:

Similar Messages

  • Sequence and clip name keeps changing... Why ? Solutions ?

    The sequence and clip name on a particular project keeps changing. It usually takes the name of of an audio file. Deleting the preferences, opening the timeline in a new project, making it offline and reconnecting it again, et. all doesn't help ? What is causing this ? HELP
    Mac Pro Quad core
    Memory 8GB
    Storage - XSAN
    FCP version 7.0
    OS X version 10.5.8
    Quicktime 10 & 7.66 both installed
    Anyone has a solution for this....
    Jp

    I made the sequence off line and save it as a new project. Then deleted the preferences and opened the project..... reconnected the media. Most of the clips showed the correct clip name and the sequence name also didn't change. But a few audio tracks still had the old problem....
    Thanks for the reply.... haven't updated yet..

  • How to change '2 Outputs' to '1 Stereo' in Sequence Settings

    Any ideas how to change audio to '2 Outputs' to '1 Stereo' in Sequence Settings of FCP5.1.4? I'm always having to render my audio after importing!

    My about-box reads:
    "Studio Edition Version 10.1.3.1.0.3984"
    "Build JDEVADF_10.1.3.1.0_NT_061009.1404.3984" (arrgh, please make an option to copy/paste this...)
    Have you accidentally switched 2 ciphers, Frank? By the way, I found the reason for this - I had set the "J2SE version" under "Libraries" to "1.4.2_06" earlier to make sure about 1.4.2 compatibility - but since we soon don't need this any longer, I'm switching this value to 1.5.0 to be able to fully utilize 1.5 options in my code.
    So... I guess we can say, that this was my own fault.
    Thanks,
    Jacob

  • Matching Raster and Vector RGB color in InDesign CS3.

    We print on a Durst Lambda RGB imaging device to photographic paper. All color management is done as an early bind (raster files are converted to the printer's color space and vector colors are chosen from a palette database). So basically the files must go through InDesign without any color change in raster or vector information. We have clients that require specific RGB builds for logo colors the are present in both their raster and vector files.
    Color Management is set to "North American General Purpose 2" with "RGB: Preserve Embedded Profiles" selected.
    1) The file is exported as a PDF 1.4, High Quality, PDF/X_None.
    2) The PDF was ripped on a Cheetah RIP (Jaws level 3) with no color management on.
    3) Solid raster colors such as 0-255-0 will reproduce as 0-255-1.
    4) The color differences between the raster and vector are usually 1-4 points.
    5) The vector is consistent as was input in the programit's only the raster that changes. When you are trying to match raster and vectors logo colors it is a killer.
    However, I can go into the InDesign (or Illustrator) color settings and turn color management off (This is our current workflow). In doing this the RGB working space uses the monitor profile and "color management policies" are set to OFF. With these settings the RGB raster and vector match. The problem with this work flow is two fold:
    1) We have other devices than our RGB Durst Lambda that can use the InDesign color managementVutek flat bed 3200 and grand format 3360.
    2) We have had many occurrences where the custom "color management off" settings have reverted back to the default "North American General Purpose 2"without any intervention.
    I have tried this with different RIP's with the same results.
    Does anyone have an idea to create a simple PDF workflow and keep the color information consistent?
    Program: InDesign CS3 5.0.2
    Platform: Mac OS 10.5.2
    Computer: G5 tower with 4 gigs of RAM

    I believe that setting is an old Illustrator setting that has been saved to effectively turn the color management off. The monitor profile effects the image displayedit doesn't effect the color transform.
    Anyway, the color management I want to use is the "North American General Purpose 2".
    To reiterate:
    The procedure:
    1) The file is exported as a PDF 1.4, High Quality, PDF/X_None.
    2) The PDF was ripped on a Cheetah RIP (Jaws level 3) with no color management on.
    The Problem:
    3) Solid raster colors such as 0-255-0 will reproduce as 0-255-1It changes from the original raster color placed in InDesign.
    4) The color differences between the raster and vector are usually 1-4 points.
    5) The vector is consistent as was input in the programit's only the raster that changes. When you are trying to match raster and vectors logo colors it is a killer.
    To summarize, the color of the raster file will change from the original that was place into the documenteven though nothing was selected in InDesign that would change the color (i.e. profile conversion to an output profile or a transparency effect used). The change is slightbut there.

  • How to change sound output?

    Howdy
    I recently bought a high-end toslink cable which I connected from the optical/digital out from my iMac to my receiver. The sound quality is excellent, however I noticed that all sounds now gets passed to my Hifi system all the time. The only way (I could find) to route sound to the internal speakers is by physically unplug the cable. This is really not workable in the long run as it wears down the plug and, not to mention, my patience...
    So, anyone know any way to switch output to internal speakers w/o having to unplug the cable? Or is there another approach (I'm thinking Airport Express)?
    /Cheers

    Unfortunately, you cannot select +Internal speakers+ in System Preferences Sound pane Output tab, if you have something plugged into the audio output port.
    If you got an AirPort Express, its AirTunes feature would certainly work for iTunes output. However, I believe AirTunes would only play the output of iTunes. So it would work great as long as you were only playing songs and videos using iTunes, because all other sounds will come from your computer speakers. No need to change any setting manually, after you are done listening over the stereo system. However, it would not work so great, if you wanted the audio output of some other programs to be played from the stereo system; but there seems to be a third-party solution for that issue
    http://www.rogueamoeba.com/airfoil/mac/
    If you have separate powered computer speakers that connect using a standard mini-jack, one alternative is to get a USB (or possibly FireWire) sound output device (if you want to be able to change the sound output setting manually). The least expensive one may be the Griffin iMic.
    http://www.griffintechnology.com/products/imic/
    It provides a second sound output port over USB, so it should show up as a separate choice in System Preferences Sound pane Output tab. Therefore, you should be able to use the Sound preference pane to manually switch the sound output from you stereo system to the computer speakers connected over the USB iMic.

  • PP6 Multiple tracks output setting & why MATCH SEQUENCE SETTINGS isn't seeming to work correctly!!

    First... can you change a active timeline from stereo to mulititrack 16 channels for instance without creating a new sequence and pasting old sequence into new one.
    Also, watch this video...
    16 channels of audio... great... try to match sequence settings it changes from 16 channels to stereo. Um... what's happening there???? How do we fix that?
    http://youtu.be/EslOPTRk79E

    Jim, this is the best place for Mike to post.
    This is where the Premiere Pro engineers, testers, and product managers will see questions. It's extremely cumbersome to try to forward a tweet to the relevant expert, and it's even worse to try to troubleshoot and give answers longer than 140 characters (with screenshots) over Twitter.
    That said, I'll get someone more familiar with the new audio features to have a look.

  • In R12 how to change concurrent output/log file name prefix?

    how to change concurrent output/log file name prefix?

    but i want to change change concurrent output/log file name prefix?You cannot, and I believe it is not supported for all concurrent requests -- Please log a SR to confirm this with Oracle support.
    Thanks,
    Hussein

  • How to change default output XMLP report  to rtf/excel !

    I used xmlp 5.6.2
    The default output for report is pdf file.
    Now i want to change default output to rtf or excel file
    Please ! help me !

    Hi Brightsea,
    We customized the code in FNDRSRUN.fmb, But we are not able to get the output in RTF format.
    Our requirement is to display the report output in .rtf or .xls(Not required to defaultly as .rtf or .xls).
    we are getting the following error.
    "The XML page cannot be displayed
    Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
    Invalid at the top level of the document. Error processing resource 'http://galaxian.bluestar.cvg0:8000/OA_CGI/FNDWRR.exe?t...
    {\rtf1\ansi\deff0"
    ^
    Regards,
    suresh.

  • HT204053 i have an apple id on my ipod & another for my macbook & iphone.  how do i change the id for my ipod to match the one for my macbook & iphone?

    i have an apple id on my ipod & another for my macbook & iphone.  how do i change the id for my ipod to match the one for my macbook & iphone?

    To change the ID:
    For iMessage, go to Settings>Messages>Send & Receive (Receive At in iOS 5), tap the ID sign out, sign back in using the other ID.
    For FaceTime, do the same thing in Settings>Facetime.
    For Purchasing, do this in Settings>iTunes & App Stores (Settings>Store in iOS 5).
    For iCloud, you'll have to delete the account, create a new account with the other ID, and migrate your data to the new account.  Before deleting the account, if you have any photos in photo stream that are not in your camera roll or backed up somewhere else save these to your camera roll or you will lose them.  To do this, open the photo stream album in the thumbnail view, tap Edit, tap all the photos you want to save, tap Share, then tap Save to Camera Roll.  Once this is done, go to Settings>iCloud, scroll to the bottom and tap Delete Account. When prompted about what to do with the iCloud data, be sure to select Keep On iPod.  Next, set up a new iCloud account using a different Apple ID (if you don't have one, tap Get a Free Apple ID at the bottom).  Then turn iCloud data syncing for contacts, etc. back to On, and when prompted about merging with iCloud, choose Merge.  This will upload the data to the new account.

  • How to change the output as text format in Apps R12.1.3

    Hi All,
    Currently iam trying to modify the Java Concurrent Program (FDExtractAndFormatting) in Batch Payment Process. This Program is generated in text format in 11i APPS. Now we are upgrading to R12.1.3. In R12.1.3 output is coming as PDF format. Here my requirement is how to change the output as text format in R12.1.3 also.
    Please do the needful and suggest me.
    Regards,
    Jagadeesh

    1. It is seeded java concurrent program. Some attributes are missing from 11i to R12. In 11i it is a text format.So i have to investgate on how to retrive those attributes in R12. What is the concurrent program name?
    Have you tried to change the output and submit the request?
    2. Once all are attributes are coming in PDF format. Client wants to open same output in text format as it is 11i (In R12 it is generated in PDF format).If the above does not help, please log a SR.
    Thanks,
    Hussein

  • Change in output of quotation form in main window ( in SAP SCRIPT)

    HI expects,
          i want to change to the output values of quotation form and that should come in single line. at present it is coming in double line.as per my requirement is to be display the data in one line.
    item      material                              description
                                    Qty                                       price             price unit               value
    0010    fff.044                                   motor                                                                               
    10ea                                       26.541.00     1ea                       265.41
    my requirement is
    item     material      qty         description       price         price unit          value
    0010   fff-044        10ea       motor             26.541.00     1ea                265.41
    how can i solve this problem in SAP SCRIPT (standard form : rvorder01)

    Hi,
    As stated above , you cannot make changes in standard SAP script, create a Z one and then use it.
    Manish

  • How Do I Change Video Output Quality When Capturing .DV Video From Camera?

    I am experimenting with both this Premiere Elements 10 trial, as well as other brands of software, finding the best one to purchase for my needs.
    In some other software, I not only indicate the source quality, but the output quality to the computer.  If I want to upload the full quality video files to edit for retransferring back to a DV video tape, that's fine, but I will take up a lot of computer memory, relatively speaking.  On the other hand, if I know that I'm going to be editing the video for replay on the computer or over the web, I can tell the program to upload to MPEG4 or some other conversion. 
    I am not seeing this as an option with the Premiere Elements.  Can anyone tell me where, if possible, I can alter the output quality before the program begins the download?  I certainly can find the input quality (such as .dv 4:3 ratio).  I'd prefer not to always have to download the full quality video, THEN have to covert it as a separate step.
    Thank you!

    The PRE workflow is (1) Create your project (2) import your assets (3) sequence and edit your assets (4) create your menus (5) share your project.
    The quality of intended output has no effect on your project settings which should match your source footage. Done this way optimises PRE's performance - as it can internally process far more effectively when matched to a 'native' format.
    For standard definition the ideal format for PRE is DV-AVI Type 2. This is almost lossless and operates at around 13GB per hour.
    Compression to an output format (e.g. DVD, or an iPod, or viewing online) is managed through the share process.
    You could:
    Import your footage - e.g AVCHD, HDV, DV-AVI, VOB
    Share it to a compressed format - e.g. MP4
    Delete the original capture source (in Step 1)
    Work in a new project using the compressed output (in step 2).
    But if you do this your final output quality will be lessened through working with a compressed original that you will then compress again. I can't see what you feel you will gain by this - disk space is so cheap now why wouldn't you want to give yourself the best quality source to work with.
    Note that once you are finished with a project you can archive it off to free up your disk space.
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children

  • Change Build Output Filename for SSIS Project

    I have a Visual Studio 2010 solution (TxMExtractLoad) with two SSIS projects: TxMExtractLoad.Discovery and TxMExtractLoad.Contract1.  The project name (in project properties) is set to the proper two-part name in each project.  However, when I
    do a "Build", the generated .ispac file loses the second part of the project name: both projects build to "TxMExtractLoad.ispac" (in different directories, fortunately).
    I can see where I can change the output *path* for the build, but not the output *filename*.
    Any help, anyone?
    Thanks in advance...

    Came across this post whilst encountering the same issue and thought i would post the solution i discovered
    The ispac will get its name from the Name defined in the project properties minus whatever is following the final name part
    Therefore, your SSIS package of TxMExtractLoad.Discovery will become TxMExtractLoad.ispac 
    If you change the name in project properties to something like TxMExtractLoad.Discovery.myProject
    or TxMExtractLoad.Discovery..ispac then when you build it it will build as TxMExtractLoad.Discovery.ispac 
    Hope this helps

  • How to change the output directory of .xml files

    Hi,
    There are lots of .xml files generated under
    $ORACLE_AS_HOME/j2ee/home/applications/xmlpserver/xmlpserver/xml.
    (ex:/usb/bipub3/oracle/oc4j_bi/j2ee/home/applications/xmlpserver/xmlpserver/xml).
    I found these files are generated in the following operation;
    1.Log in BI Publisher.
    2.Select the Schedules tab.
    I think they are kind of temp files so we will be able to delete them.
    But I'd like to know how to change the output directory.
    Can we change the above directory to other path?
    Regards.

    Why? As that may invalidate support since you configure/alter the deployment.
    The location is specified in oc4j_bi\j2ee\home\applications\xmlpserver\xmlpserver.war, so you could go into the war file and alter it.

  • How to change the output executable file name(a.prj:(output)--- b.exe)

    LabWindows / CVI： how to change the output executable file name
                For example, I have an A project a.prj, I do not want to compile the output file is a.exe, but b.exe.
    I will try to save as a.prj b.prj, a.cws save as b.cws
    eg:a.prj  ---->(output)--->b.exe
    Solved!
    Go to Solution.

    You can go to Build >> Target Settings menu item, select Release (or Release 64) in the Configuration filed and set the name of the executable to create in Application FIle field, withouyt need to change the prj or cws filename.
    See the complete description of available options here.
    Proud to use LW/CVI from 3.1 on.
    My contributions to the Developer Zone Community
    If I have helped you, why not giving me a kudos?

Maybe you are looking for