Changing a Numbers Template

I really like the grade book template in numbers; however, I want to make some minor changes.
Instead of adding grades by percentages, I would like to add in point totals. Students receive a percentage based on the amount of points they receive.
Any idea how I would go about making these changes. I am sure that it is simple.

For sure, look at the used formulas and edit them to fit your needs.
Then save the edited doc as a custom template.
That's all folks
Yvan KOENIG (VALLAURIS, France) vendredi 9 avril 2010 17:10:16

Similar Messages

Change UPK publishing template

Hi there,
can anybody help me?
How can I change the publishing template of UPK (for the Instructor Manual). For instance, the default format does not insert heading numbers. I also want to change the font and the front page.
Thanks,
Rutger

Hello,
Give this blog entry a read: http://blogs.oracle.com/UPK/2010/07/customizing_upk_outputs_part_3.html
I think that should get you started.
Best regards,
Marc

Pages (or Numbers) Template Cannot Be Opened From Outside the Application

Ever since the upgrade to Mavericks, I cannot open a Pages (or Numbers) template without being asked.....
Do you want to add this custom template to the Template Chooser? Then my only options are Cancel or Add to Template Chooser.
If I cancel, it won't open anything.
But this template is already in my Template Chooser.
So the only way to open a template in Pages (or Numbers) is to open the application first, and then click "New", and choose the template.
I can't figure out a way to open the template from outside the application, which is very very handy, rather than having to open the application every time that I want to access a template.
How can I open a template simply by clicking on it?

Yes, the problem is that opening the template from outside of the application will not open the application, showing the document. I only get this....
Do you want to add this custom template to the Template Chooser? Then my only options are Cancel or Add to Template Chooser.
If I cancel, it won't open anything.
But this template is already in my Template Chooser.
Put your Pages or Numbers document on your desktop and open it by double-clicking it, and you'll understand. You can't do it, even if the template is in your template chooser.
The only way to do this now is to open the application, select "New", and the select the template. So you cannot open a template from outside the application....only from within.

How can i remove a pages/numbers template

How can i remove a pages/numbers template.
They used to be in the library in my home map, but i can't find the library on my HD.
Is there anyone who knowes a solution
Greets Kloria

Hi everyone,
I find the answer myself.
Go tot the finder, select Go in the menu, push the alt button and there it is.
De library is now visible and you can open it.
Find Application support > iWorks > Pages or Numbers > Templates > My Templates.
Remove the template, thats it.
Greets Kloria

Change the Appraisal Template in Mid of Year.

Hi All,
We want to edit the appraisal template which is being used in Production.
System is allowing to edit the template in development as there are no documents created. Once we transport the change to production what will be the implication.
Q1. Is it recommended to change the template after it is being used.
Q2. If really need to edit the template in mid of appraisal process how do we go forward.
Thanking you in advance.
Kamal R.
Edited by: Nalin Jain on Aug 5, 2009 7:41 AM

Hi Suresh,
We are on ECC 6.0 and SP 43.
We need to put some extra fields / Notes to the targets and extra sub statuses to correctly identify the condition.
But already appraisal process started and documents are created. Now we cannot either create the same documents in new template or postpone the appraisal template change to next year.
In this situation we decided to change the existing template. We want to know what will be the implications if we change the template in development and transport it to production???
Download and upload will create a new template which will not be useful for our case.
Thanking you in advance.
regards,
Kamal.

Changing/Adding Numbers to the Network/Dial-Up Connection Thing-a-ma-bob...

I would like to do this:
*Put these numbers in Network>TCP/IP>DNS Servers...*
208.67.222.222
208.67.220.220
But I am scared to death to try. I get connected without a hitch now, and I do NOT want to disturb that!!! I don't know what I am doing with this, but if it will improve the speed and stability of my dial-up connection so I can successfully download and install my updates, I will risk it.
How much chance do I have of messing my connect-ability up altogether?
And how do I go about doing it properly?
Cyan

99.999999% safe and easy to undo, but to make it even nearer 100%...
In the Network Pref Pane, choose the Location drop down, choose Edit Locations, then choose Duplicate... now you have one you can paste those numbers into, and just switch Locations back if need be without changing any numbers.
It's safe though anyway really.:-)

Just setting up iCloud on my iMac, my problem is when trying to sign out/off from iCloud it comes up with a verification code that is being sent to my land line, I'd changed the numbers in my Apple ID and they show as changed but the land line number stil

Just setting up iCloud on my iMac 10.9.2, my problem is when trying to sign out/off from iCloud it comes up with a verification code that is being sent to my land line, I'd changed the numbers in my Apple ID and they show as changed but the land line number still shows as number that the verification code is being sent, I prompt "Don't have access to this phone" and that's no help at all. The only way I can sign out /off from iCloud is to uncheck everything that I wanted to keep in the cloud????
Thanks in advance for any help.

Skip the iCloud sign in for now.
Once you reach the home page, go to settings and sign out of FaceTime and Messages. This should also sign you out of iCloud.
Go to iCloud in settings and sign in with the correct Apple ID.
If that does not work
Skip the iCloud sign in
Go to Apple ID.apple.com and sign in
Change your Apple ID to the old one
Delete iCloud account on your device with the old Apple ID and the same password.
Go back to the website, change your Apple ID back to the current one. You will receive an email to verify the account. Verify first.
Sign into iCloud on your device with the correct Apple ID and password

How to change the numbers of items in a ring control in run time ?

Hi !
I would like change the numbers of items in a ring control in run time, but I can´t.
Thanks.

Hello blaze,
did you try the "Strings And Values []" property of the ring?
LabView7.1 help says:
Array of clusters containing the strings from which you can select in the ring control
and the numeric values for each item. Use the Strings [] property if you do not need to
assign specific numeric values to each item.
Best regards,
GerdW
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

I'm having a devil of a time changing page numbers even though I'm following the instructions for doing so. Any tips?

I imported an already paginated text from Word into Pages to format it for a book. I don't wan the first few pages numbered, so I've been trying to begin page one at the beginning of chapter one. I've followed the instructions for changing page numbers, i.e., click next to page you want to change; in dialogue box click "start new header /footer; a new section is created; click Setup, click Section; in page numbering section, select "Start at" and enter a new starting number." In trying to do this often I can't get the dialogue box, or when I do, I get a new section that commences with a blank page. Or, the dialogue box that should allow me to change numbers never appears. Help!

Is this for the Mac or iOS?
You only have iOS 7.0.4 as atag.
Peter

Question on changing the report template to display the images

I am trying to change the report template so that each table cell will display an image and a checkbox for the image. The column templatet for the new report template is like this:
<td #ALIGNMENT# headers="#COLUMN_HEADER#" class="t17data">
<table>
<tr height="90%"><td>
<img src= "&F101_GET_THUMB.#COLUMN_VALUE#" onmouseover="return onmouseover_img('#COLUMN_VALUE#');">
</td></tr>
<tr height="10%"><td align="center" valign="bottom">
<input type="checkbox" name="f01" value="#COLUMN_VALUE#"/>
</td></tr>
</table>
</td>
My questions are:
1. If the #COLUMN_VALUE# is null, the table cell will display a broken image icon and a checkbox. How could I avoid this? I could add condition to this template, such as when #COLUMN_VALUE# is not null, but how to refer to the value of #COLUMN_VALUE# in pl/sql?
2. I want to always put the checkbox at the center bottom, but no matter what I set "align='center' valign='bottom', it is always close to the image. Since the image sizes are different, the appearance of the checkbox are just up and down. How to fix this?
Thanks,
Fengting

hello,
at designtime the elements from the template are physically
imported into the report. the only way of re-applying a template
is to use the wizard, which will re-default the layout.
regards,
the oracle reports team --pw

Change a web template in Web Application Designer 3.X

Hi All,
I have a web template , when i execute it i get a chart format by default. But i want to change it to table format .Can you please let me know how to do it?.
I am not able to change the web template .
Thanks and Regards,
Sharath

Hello Sharath,
First check whether you have change authorizations for WAD, check you user name is added in the role for web templates and also check the authorizations.
then in the web template in the menu bar go to view option ,select web items and properties , so that you can find them in the left hand side, then replace the chart item with the table and assign the query to the table.
hope it is clear,
assign points if useful.

Change all page templates in one go

Hi,
Is it possible to change all page templates in all applications in 1 go, we have 100s of applications and want to change the titile tag from <title>#TITLE#</title> to <title>#TITLE# - #APP_VERSION#</title>
Thanks in advance.
Graham

As i understand you need to change all Your aps by changing the templates ?
The fastest way is to change the actual sources of the templates if You've got permission to do that.
the table i witch the templates are is wwv_flow_templates
There will be need for clob utilities but it's possible
regards
piotr

Numbers templates

Anyone know of a numbers template for a check register?

There is one built-in in Numbers '09. Otherwise, look at iWork Community. The last time I looked there was a very simple one & a very, very complex one.

Changes to multiple Templates

I know how to apply changes to child pages of "a" Template
after updating that Template. However, when I make changes to
multiple Templates of my site, is there a way to apply those
changes to child pages of all those (updated/modified) Templates at
once (using a single command or something) without having to work
on one Template at a time?
Here is a specific situation: We have nearly 50 Templates in
our Web site. We have to update a domain name of a link in all
these Templates. That is -- from "www.OLDname.com" to
"www.NEWname.com". It's easy to do a find and replace to make the
above change in all these Templates. (Note: I am referring to only
the changes in the NON-editable region of these Templates). Once
the above change is done, how do I apply those changes to all the
child pages of these Templates in a few easy steps ;-) Is opening
each Template and doing "Modify > Templates > Update
Pages..." the only way to achieve this?

Alan, thanks for the response.
I have one more question. When I run this command
"dw menu-->Modify-->Templates-->Update Pages", I
get lots of errors like the ones below. I had to press numerous
"OK" buttons to clear them away. Since they were so many, I usually
kill the process to get rid of them.
Error Message - Sample #1
Error accessing file "C:\sth\Templates\general.dwt:" file not
found (error code 2)
Error Message - Sample #2
There is an error at line 7 of
"C:\sth\sth\Templates\some.dwt": Unbalanced body tag.
Error Message - Sample #3
There is an error at line 218, column 8 (absolute position
28866) of "C:\sth\sth\sth.htm": Duplicate editable regions of name
"Document body".
I don't get this problem when I work on the Templates one by
one. Is there a way to suppress these errors, or at least cancel
the operation after this command has been issued ("dw
menu-->Modify-->Templates-->Update Pages").
Thanks again for your help.

Changing page numbering

Hi everyone,
I have a 24-page facing pages document. The first and last pages are the cover for this booklet I'm doing, and the first page will be on the inside cover and therefore a left hand page. I'm using master pages for the inner pages of the booklet and have used automatic page number on these master pages. With it set up like this, the second page of the file (which is actually page 1 of the inner pages) is showing as page 2 since it's a left hand page being the inside cover, but I need it to show page 1. I tried clicking on this second page and choosing "Numbering and Section Options" and then chose "Start page numbering at 1", this changes the page number to 1 but it also makes this page a right hand page whereas in fact I need it to stay a left hand page and just change the numbering.
Is this possible in Indesign CS2?
Appreciate any advice.

^ There is something to be said for David's response and I would certainly check with your printer before sending it to them.
If you do need to number your pages such that odd numbers fall on LH pages, uncheck "Allow Pages to Shuffle" from the flyout menu of the Pages Palette before changing the section start.
We actually have to do this in Teacher Editions quite frequently because the A, B, C teacher insert pages frequently start on a the left page (and A is equivalent to 1 in InDesign's pagination brain).

Changing a Numbers Template

Similar Messages

Maybe you are looking for