"Changing Actual Posted C Ctr"!

Hi Friends,
I want to change "Actual Posted C Ctr field in Change Internal Order : Master Data Screen,but this area in inactive and I can't any change on it...
How can I change the value in this area...
Thank you...

Hi Ozgur,
I assume you already have postings on the order (you can check via TA RKACSHOW). In this case the actual posted cost center cannot be changed. You could delete the postings, but I think it would be easier and also audit proof if you create a new order and then repost via KB11N etc.
Regards
Karl

Similar Messages

  • Change to Actual Posted CCTR in Statistical Orders

    Hi,
    I want to allow changes to the field actual posted cost center for a statistical order.  This is for the case where postings have occured, however the field is currently greyed out.
    Any ideas?
    Cheers
    Mick

    Hi Mick
    You can use Controlling Internal reposing like a JV in Controlling to reverse and pass a new entry.
    Regards,
    Suraj

  • Can change Request POST to GET ????

    I have a jsp that posts to a servlet....I then need the servlet to redirect to another jsp but as a GET. Can this be done...
    I have tried forward (that unfortunately keeps old URL and does not change the POST to GET) and redirect obviously does not do it straight out of box- would like something like:
    request.setMethod(GET)
    where it originally was POST
    Thanks if anyone has ideas
    Jim

    Well, after racking my brain out on a Fri. night (isnt it wonderful when u need something done at 4:30 on a FRiday!!)- I finally got a work around- and not from java, but javascript!!-
    By putting in :
    onload="document.preflightForm.submit()"
    on the jsp page before my svg page I get a request submittal of type "GET" and all works out as well despite the oddity jsp/svg bahavior I noted:
    1. The jsp/svg executes 2ce- I have seen other posts about this- perhaps adobe svg viewer reauthenticating(?- there were no answers)- easy to workaround with session boolean flag.
    2. On IE the jsp/svg with a redirect from a control servlet only displays the svg when it is from a GET (the jsp that requested the servlet)- a POST will result in an empty page (why???- no idea- but netscape works fine).
    So, despite my past probs with javascript I have now found a place for it in my java world- actually is a bit interesting/challenging!!
    Thanks for thoughts guys- although still would like to know more of this odd behavior/ or other workaround- still too bad cannot change request method from POST to GET- even if would lose info....oh well...at least now can enjoy my sat!!
    Jim

  • Meaning of actual posting (BKPF-PSOZL) ?

    Hello,
    Is there anyone who knows the meaning of actual posting (BKPF-PSOZL)?
    Do you know when a value "X" has been set in BKPF-PSOZL?
    Thanks for you help in advance.

    Hi Madhu,
    Here is whole header information of my document that I mentioned before.
    Document Type   SA G/L Account Document
    Doc.Header Tex  0000142100001
    Card type            Card no.
    Request Number
    Reference       1000           Document Date   01/01/2009
                                            Posting Date    01/01/2009
    Currency        GBP            Posting Period  01 / 2009
    Ref. Transactn  BKPF  Accounting document
    Reference key   0100000821XXXX2009    Log.System XXXXXXXXX
    Entered by      XXXXXX                           Parked by
    Entry Date      01/06/2009                     Time of Entry   11:16:15
    TCode           FB01
    Changed on                      Last update
    Ledger Grp                       Ledger
    Ref.key(head) 1                Ref.key 2
    As you see, it has nothing to do with previous year and documen parking.
    Thanks.
    BR,
    Chris Kim

  • Get parked items moved into a cleared status with out actually posting the

    Hi,
        I need to find a way to get parked items moved into a cleared status with out actually posting the item for payment.  I do not have a PO or goods receipt to post them to. There are some invoicese which we are not paying but we want to keep those items in the history of the vendor. I need to be able to run a parked report of open items and not have these pull into that report.  I have a some parked invoices  for various vendors that I need to get moved into the cleared status.
    Requesting you to provide suggestion on this to proceed.
    Thanks and regards,
    Rj.

    hi,
    i dont think there is any suh format.as per my knowledge u have to post park documents then only it would clear.
    Regards,
    Greeshma

  • How to change the posting date in UD stock posting for a HU managed item?

    Hi,
    We are using Handling Unit managed items with QM activation. For a specific HU managed material, we wanted to post the stock on a previous date. We have created PO on a back date and made GR also on a back date. Now the problem is, the system has generated an inspection lot. Now while trying to do UD and stock posting, I do not see the "Doc" tab which we normally see in UD stock posting for normal inspection lots (non-HU managed items) for changing the date.
    I don't see any other way to change the posting date for the HU managed item in UD stock posting. Anyone can help please?
    Thanks & Regards,
    Madhavan Krishnamoorthy.

    I don't think you can.
    Craig

  • Unable to change stock posting date at usage decision while inspecting HUs

    If we were using materials without WMS it's simple: thereu2019s a button in the screen for stock posting by which we're able to change document date and posting date; but we're using WM and the screen is slightly different: the button I'm referring it's gone!
    So, how to change the posting date at posting stock in QA11 when we're using handle units? Some end-user told me that in version 4.7 this was possible. I don't think so ...unless there was something customized at WM IMG...or maybe they were using a USER EXIT to bring a pop-up window for this (I'm starting to believe that this was implemented..). This is the first time I work with HUs, so I don't know how to manage this.
    Anyone?
    Seba
    Edited by: Sebastian Sniezyk on Apr 3, 2009 10:16 AM

    I solved it in this topic: Changing posting date at usage decision for handle units. How?

  • How to change a posting date of an invoice in background

    Hello,
    I want to change the posting and invoice dates ( to correct many invoices,)
    I use the MIR4 transaction, the batchinput works fine in foreground,
    but in background I have the error
    Control framework : erreur fatale, destination SAPGUI
    due to enjoy transaction.
    No OSS notes or BAPI's to solve it.
    I am on ECC5 (MySap ERP2004)
    any idea ?
    Best regards
    RF

    New transactions based on control framework are not suitable for batch input. Try to find a BAPI or function module to do the same.

  • PM Order Confirmation create actual posting in Cost Center, with CE type 43

    Dear Expert,
    I would like to know the business flow of Plant Maintenance that impacts cost center reporting.
    During PM order confirmation, it will create an actual posting in Cost Center from Cost Center Reporting (No FI posting), say CC Operation, with Cost Element type: 43, which is attached with the activity type of Labor Cost assigned the the PM module.
    Example: Cost Center: CC Operation, Cost Element: 840001 (CE type: 43), Amount: USD 100- (negative sign)
    My Question:
    How does this posting (currently is in controlling only) in cost center Operation with Cost Element type: 43 be reflected in my FI reporting?
    Let say there is an FI posting of labor cost in CC Operation, amount USD 100, then from Cost Center Reporting, it actually offset both amounts, and this cost center become 0 in amount.
    Kindly advise the concept of Plant Maintenance.
    This seems like same with the concept of KB21N.
    Thanks.

    Hi Karthikeyan,
    My issue and concern is similar to the issue raised as follows:
    Secondary Cost Element Configuration for Plant Maintenance Order
    http://scn.sap.com/thread/3488730
    In this forum, it says that the posting in CO, during PM order confirmation is ...
    +10 for Order and -10 for cost center A
    After PM Order settlement:
    -10 for Order and +10 for cost center A
    From the cost center and PM Order CO report, they are 0 in value ...
    Is this the correct way?
    Thanks,
    -Chin

  • Unable to create a billing document , have to change the posting date

    Dear All,
                      I have performed the following steps:
                     1. I have created Customer
                     2. Created a material.
                     3. Linked the customer to the material
                     4. Post initial stock for the material.
                     5. Create a Sales/Order.
                     6. Displayed the sales order and recorded the scheduled delivery date.
                     7. Created the delivery for the sales order.
                     8. Transfer the stock from the warehouse management
                     9. And update the order.
    While updating the order I selected post goods issue and it would not go ahead because the posting date is not there in the posting period. Where do I change the posting date. I could not find it anywhere. I did not enter the date anywhere.
    Thank you,
    Sandhya

    Hello Sandhya
    Here is how MMPV works.
    Lets say I am at the end of the May month 05.31.2009 so lets say period corrresponding to this is 05/2009.
    Now if you want to post data in June perios 06/2009 should be opened.
    Here is what I will do in MMPV
    Enter my company code
    Instead of using periods I will use date which will be 06/01/2009 (mm/dd/yy format in my example)
    Check radio button check and close period
    Click on remaining checkboxes.
    Execute
    The effect of this will be that the previous periods will be closed and June will be opened.
    In your case since no one has opened periods after 2006 so may be you will have to repeat this step for each month until you reach current period if that is the one in which you want to post goods issue.
    Thanks
    Vikas

  • Mass change of posting date/fiscal year in LIV parked invoices

    Hi,
    We have OSS note 99775 (program ZFSAP2_B) for mass changing posting date and fiscal year for FI parked documents but I can not use this to change posting date for LIV parked invoices.
    Did anyone have any idea how to mass change the posting date of LIV invoices? any NOTE or PROGRAM?
    I tried to create a BDC using FBV4, which in turn calls MIR4, but system is over writing  initial line item amount and qty from PO. 
    I can read initial invoice line item values and over write again but I dont think this is how I should do.
    Please advice.
    Thank you all and best Regards
    Vijay Goli

    Hi
    Thank you very much for your input.I modified the program ZFSAP2_B given by sap and it worked fine for LIV invoices also.
    When I used this program  in 2007 for FV60 documents the document key was changed without raising the event FIPP.CHANGED. But this year when we changed the posting date the system triggered the CHANGED event and as a result of this event the workflow came to the starting point. We did not make any chages to workflow template during 2007. Any idea what could have casued this event to trigger?
    Thanks
    Vijay

  • Reg Change of posting Date at the time of Incoming Excise Invoice

    Hi All ,
    Hope all r doing gr8 !!
    I have one question relevant to Posting Date of IEI.
    If i am doing IEI based on GRPO the system picks up the posting date from GRPO , so is there any way to change that Posting Date to current date without disturbing the Posting Period (Here Period is locked for that month- i.e.  previous month).
    Looking for your valuable inputs.
    Regards,
    Kashinath

    Hi!
    Its not possible. You have to Book IEI on GRPO Date only. You Make your Posting Period to Closing Period and Give Autho to Users who use those period.

  • How to change the posting date at the line item level in a sales order

    how to change the posting date at the line item level in a sales order

    Hi,
    I believe the POSTING DATE will appear on the accounting document
    In the Accounting document, the posting date will be based on the  Billing date.
    Please let me know if you need any more details
    santosh

  • In MIGO , How to restrict the user to change the posting date?

    Hi All,
    In MIGO , I want the user to restrict from change in posting date i.e. user should not be able to change the posting date. The system should take to-day date only as a posting date.
    Thanks in advance.
    GP

    Hi,
              check this MBCF0005.
    EXIT_SAPM07DR_001.
    BADI being <b>MB_MIGO_BADI.</b>
    <b>Reward points</b>
    Regads

  • BAPI to change the posting data of invoice document

    Hello All,
          I need a BAPI to change the posting date of the invoice document (Type : RE, Generated from MIRA transaction). Do let me know if you can across a BAPI to do it.
    Thanks,
    Siva.

    BAPI_INCOMINGINVOICE_CHANGE

Maybe you are looking for