Changing AD Domain name with Microsoft Exchange 2013

Hello everyone,
we need to change our Active Directory Domain name from .local to another naming convention.
We are running a Windows Server 2012 R2 environment with Exchange 2013.
- Domain Controller
- File Server
- Exchange 2013
Running on a VMware ESX Host.
What is the applied way to change the Domain name? Or is there no way to change in the running Forest and we have to re-setup everything?
Thank you for your answers.
Regards,
Sebastian

Hello,
You need install new Exchange server in your new enviroment (forest).
Please read this link:
Prepare mailboxes for cross-forest moves using the Prepare-MoveRequest.ps1 script in the Shell
Other nice article:
Moving to a new forest and retaining the same SMTP domain ( with native scripts ) -
Part I
Regards

Similar Messages

Configure sharepoint 2013 with Microsoft exchange 2010

Hi,
I am want to configure SharePoint 2013 with Microsoft exchange 2010.
Please let me how can I integrate these server to Send/ Receive domain E-mails.
Thanks,
C Mahone

For email integration there really isn't anything special about Exchange 2010 vs. any other mail server. Check the links here on configuring Incoming and Outgoing mail in SharePoint:
http://technet.microsoft.com/en-us/library/ee956941(v=office.15).aspx
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

I have a Domain name with email forwarding to my Service Provider which worked very well when I had a PC. Now I have iMac and have changed to IMAP from POP3 so I can sync. between iMac and iPad but how?

I have a Domain name with email forwarding to my Service Provider which worked very well when I had a PC. Now that I have iMac I have changed the account type to IMAP from POP3 so I can sync. between iMac and iPad but how?
I do receive emails into my iMac for which I have 3 email accounts but am struggling on how synchronise between iMac and iPad so that both are up to date at all times. I have also set up a iCloud email account thinking this was the way to go but have drawn a blank.
Any help would be very much appreciated.

Linc Davis,
I have set up my email address both within my iMac and my ISP as IMAP accounts and I receive all emails without problem on my iMac. I have also set up an iCloud email address using my iMac.
I have enabled the email within "setting" on my iPad and have used the iCloud account. I have sent emails from the iMac to iPad using the iCloud account address and vice versa. I have also sent emails from the iPad to the iMac using my non-iCloud email address and they have gotten through.
The one thing I would like to have is for the iPad "mail" mailboxes to mimic the iMac "mail" mailboxes and both to be "in sync". I am not really interested in using the iCloud email address for my email but would really like to use my "normal" addresses as these are what most people know me by.
Do I need to set additional accounts within the iPad which are the same as the email accounts I have within the iMac and my ISP? I have reached the end of my knowledge as regards email synchronsing.
Thanks

ConfigureMsgService fails with MAPI_E_NETWORK_ERROR (Exchange 2013)

Dear friends,
I've got a strange issue with Exchange server 2013. I am unable to configure profile with my own application.
The function ConfigureMsgService returns MAPI_E_NETWORK_ERROR (0x80040115).
The point of failure is this:
// Property structure to hold values we want to set.
#define PROPERTIES_NUM 5
SPropValue propValues[PROPERTIES_NUM];
memset(&propValues, 0, PROPERTIES_NUM * sizeof(SPropValue));
// PR_ROH_FLAGS
propValues[0].ulPropTag = PR_ROH_FLAGS;
propValues[0].Value.l = ROHFLAGS_USE_ROH |
  ROHFLAGS_HTTP_FIRST_ON_SLOW |
  ROHFLAGS_HTTP_FIRST_ON_FAST;
// PR_ROH_PROXY_AUTH_SCHEME
propValues[1].ulPropTag = PR_ROH_PROXY_AUTH_SCHEME;
propValues[1].Value.l = ROHAUTH_NTLM;
// PR_ROH_PROXY_SERVER
propValues[2].ulPropTag = PR_ROH_PROXY_SERVER;
propValues[2].Value.lpszW = (LPWSTR) wszRohProxyServer;
// Server
propValues[3].ulPropTag = PR_PROFILE_UNRESOLVED_SERVER;
propValues[3].Value.lpszA = (LPSTR) szServer;
// Email
propValues[4].ulPropTag = PR_PROFILE_UNRESOLVED_NAME;
propValues[4].Value.lpszA = (LPSTR) szEmailAddress;
// Configure the message service with the properties above.
hr = spMsgSvcAdmin->ConfigureMsgService(
(LPMAPIUID) pRow->aRow->lpProps[iSvcUID].Value.bin.lpb,
NULL, 0/*SERVICE_UI_ALLOWED*/, PROPERTIES_NUM, propValues );
This works well if SERVICE_UI_ALLOWED flag is used but fails with MAPI_E_NETWORK_ERROR
if "MSEMS" service is configured without configuration property sheet.
The code above also works if Exchange server is installed at the computer that also works as domain controller. But the problem occurrs if domain controller and exchange server are separate machines.
Enviroment:
Domain controller: Windows Server 2012
Exchange server: Windows Server 2012, Exchange 2013
Client machine: Outlook 2013 installed
I'm guessing that there is some issue with AD, but I've run out of ideas at this point.
Many thanks in advance for any suggestions.
tomas

Hi tomas,
I am also facing the same problem, my customized MAPI application is failing with MAPI_E_NETWORK_ERROR
(Exchange 2013).
The exchange server and the AD are on different boxes.
I tried following the
steps as suggested in the article but no effect.
Can you tell me what registry value do I need to set and in which machine do I need to set it.
I do not see the HKEY_CURRENT_USER\Software\Microsoft\Exchange\Exchange Provider in the registry.
Ankush

Error 1006 - Changing Ad Site for subnet where exchange 2013 servers was setup

We wanted to change Ad site for subnet where exchange 2013 servers was setup.
When we do that error id 1006 appear on 2 MBX Servers :
The Microsoft Exchange Mailbox Replication service was unable to process jobs in a mailbox database.
Database: Database02
Error: An attempt to logon cross-site for Mdb 'xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx' was prevented to Server 'yyyyyyyy-yyyy-yyyy-yyyy-yyyyyyyyyyyy' in Site 'DomainAAA/Configuration/Sites/SiteB'. Local site is 'DomainAAA/Configuration/Sites/SiteA'.
DomainAAA - Our Domain
SiteA - AD site which temporarily cover subnet A and Subnet B
In subnet A are installed 2 DCs (Global Catalog) and other aplication servers.
In subnet B are installed all EX2013 servers (2 MBX and 2x CAS) ,1 DC (Global Catalog) and other app servers.
SiteB - new created AD site intended for subnet B
These subnets are on diferent physical location.
When we change Ad site for subnetB from the AD siteA to AD SiteB, above error appear.
There is a object ExchEdgeSyncService under the AD site : SiteA , where the installation EX2013 was done.
So do We need to create the new edgesyncservice under the siteB ?
What steps do we have to make ?
Our intention is to eventually remove all servers from the siteA and move to to SiteB.
So that siteA will no longer exist.
Thanks in advance , and sorry for bad english.
Best regards

Hi,
Why don't you just extend the VLAN so you don't have to create another site and do changes so much
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
Krisna Ismayanto | My blogs: Krisna Ismayanto | Twitter:
@ikrisna

Change internet domain name

Good Morning,
I have a windows 2008 sbs and i had configured an internet domain name(remote.xxx.com) with wizard from sbs console and all works fine, exhange and outlook clients.
Then i changed internet domain name(remote.yyy.com) and now when i open outlook, it open an alert with a certificate error from old remote.xxx.com . if i press ok it works because exist a dns record that aim to exhange server with old name.certificate for
new internet domain name is correctly installed
why does outlook try to connect to old name yet?
thanks

Hi
The certificate installed for Exchange has the old name, with most 3rd party certs you can make changes to the cert and then install a new one.

Problem with iWeb after associating a personal domain name with my MobileMe

I think I did this by the book. I associated my personal domain name with my MobileMe account, then changed the CName pointer at GoDaddy to MobileMe (MM), then went back to MM and hit 'Done'. iWeb now lists my MM account as 'My account name (personal domain name). It took a little while for the DNS pointer to propogate, but now I can go to a browser, type in my personal domain name, and MM delivers my iWeb website as I wanted it to, apparently from my domain, not web.me.com. The problem is, as soon as the DNS propogated, MM delivers my MM site OK, but iWeb can't find the files for it anymore. All my pages immediately went red (unpublished) when I tried to update the site, and any attempt to Publish gives me this error "iWeb couldn’t connect to MobileMe. Make sure your Internet connection works and try again." I'm cable connected to an ADSL router, and Airport connected to a cable router, and neither service has dropped out. I've rebooted, and retried, and the website is up under my own domain, so GoDaddy and MM both got it right. What did I do wrong? Thanks, someone... anyone?

This is now sort of resolved, but not very satisfactorily. One of the trainers at my local Appple Store found an old support issue in the archives going back to 2008, which blamed security settings for update problems. Coincidental with associating MobileMe with my personal domain, I had checked the privacy box and added an ID and PW to the site. That was the problem, not the personal domain, that was preventing iWeb from finding my MM account. Uncheck that box and my site happily updates. Of course, now I have a site that I cannot make private. In this case, not a show-stopper, but disappointing. I have reported it as a bug in the latest version of iWeb. Thanks for your help.

Login problem after change in Domain name of portal

I have installed portal 3.0 Beta on windows 2000. installation has gone fine and everything was working. after this i made change in domain name. for this i ran ssodatan.cmd script (source from metalink).
now i am not able to go by
"http://domain_name/pls/portal30/
it gives the error
"The request for content either timed out, or produced an error, after 0 seconds in the browser"
Still i am able to go by "http://domain_name/pls/portal30_sso/" further if i login as any user, then all user are coming with "login server home page" as initial page.
any idea?
null

Hi Suzette,
I have portal 3.0.6.3.3 Beta i.e apache listener. For this i have not found domain name in registry. i made the following changes in htppd.conf file.
ServerName 194.170.231.141
<VirtualHost 194.170.231.141>
DocumentRoot E:\ORAPOR\Apache\Apache\htdocs
ServerName www.ahi-carrier.co.ae
ServerAlias ahiweb 194.170.231.141
</VirtualHost>
This 194.170.231.141 is my Fixed Internet IP.
my webserver machine name, where the oracle portal is installed is ahiweb(192.168.0.247).
also i have firewall before the web server.
Is these settings are OK for Portal.
I am using apache listener for my developer forms and reports, and they are working fine with these setting on the internet.
can i get white paper for these settings.
Thanks
null

Change in domain name

Hi all,
We had to change our domain name from servername.localdomain.com to servername.server.local due to some unavoidable reasons
But while reconfiguring with new domain name i am getting below errors. Somewhere it is still stored the old domain name, Can anybody guide me the places where the domain names need to be changed.
Launch external checker with next command:
/X01/oracle/hyperion/common/validation/9.5.0.0/launchEssbaseJavaAPI.sh
EssbaseJAPIConnect admin ****** servername.localdomain.com
http://servername.localdomain.com:13080/aps/JAPI
- failed
Error:Result: -1; Error message: Cannot connect to Provider Server.Unknown host.:
servername.localdomain.com
Thanks in advance !

Hi
In Foundation Configuration, I Just deployed to Application Server. ( I mean i selected only deploy to application server)
The error i got in configtool.log is below
(Feb 15, 2011, 09:25:25 AM), com.hyperion.hit.registry.ComponentImpl, ERROR,
java.net.UnknownHostException: severname.localdomain.com
     at java.net.InetAddress.getAllByName0(InetAddress.java:1133)
     at java.net.InetAddress.getAllByName0(InetAddress.java:1098)
     at java.net.InetAddress.getAllByName(InetAddress.java:1061)
     at java.net.InetAddress.getByName(InetAddress.java:958)
     at com.hyperion.hit.registry.ComponentImpl.getHost(ComponentImpl.java:247)
     at com.hyperion.hit.registry.ComponentImpl.setHost(ComponentImpl.java:439)
     at com.hyperion.hit.registry.ComponentImpl.<init>(ComponentImpl.java:159)
     at com.hyperion.hit.registry.ConfigBeanComponentImpl.<init>(ConfigBeanComponentImpl.java:49)
     at com.hyperion.hit.registry.ComponentFactory.instantiateComponent(ComponentFactory.java:122)
     at com.hyperion.hit.registry.Registry.newComponent(Registry.java:2309)
     at com.hyperion.cis.config.persistent.utils.RegistryStorageUtils.configListToComponent(RegistryStorageUtils.java:168)
     at com.hyperion.cis.config.persistent.utils.RegistryStorageUtils.configBeanToComponent(RegistryStorageUtils.java:97)
     at com.hyperion.cis.config.persistent.utils.RegistryStorageUtils.configBeanToComponent(RegistryStorageUtils.java:91)
     at com.hyperion.cis.config.persistent.utils.RegistryStorageUtils.configBeanToComponent(RegistryStorageUtils.java:91)
     at com.hyperion.cis.config.persistent.store.RegistryPersistentStorage.store(RegistryPersistentStorage.java:68)
     at com.hyperion.cis.config.persistent.ConfigToolProductConfiguration.store(ConfigToolProductConfiguration.java:334)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:294)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
Thanks in Advance !

ITunes Says My Contacts Are Being Synced With Microsoft Exchange, But I Don't Have An Exchange Account

iTunes says my contacts are being synced with Microsoft Exchange over the air, but I do not have an Exchange account, and I have disabled over the air syncing on both my iPhone 4, as well as in iTunes. How do I remedy this? I did a complete Restore on my phone to rectify this, but got the same results.
I have worked for a couple of hours now; at first, none of my contacts were syncing with Outlook, even though iTunes said they were. Then after checking and unchecking everything I could find relating to syncing, some of my contacts synced. Now I've managed to get them all synced, but still getting this message. I need to make sure that going forward, all changes and updates are correctly synced manually whenever I plug my phone into my computer. Any suggestions?

You are getting this message because you are trying to create an iCloud account on a PC. You can only create iCloud account on an iOS device (iPhone, iPad or iPod Touch) running iOS 5 or higher, or on a Mac running OS X Lion (10.7.5) or higher. After creating your account on one of these devices you will then be able to sign into the account using this ID on your PC.

HT4972 has anyone had issues syncing with microsoft exchange server since upgrading to ios 5.1.1

Has anyone had issues syncing with microsoft exchange since updating to ios 5.1.1

No bug I'm using exchange at work I've updated a couple of people here and it's working.
Your IT guy can't fix this for you? This problem usually is due to the exchange server not recogonizing your account. You have the right server and domain entered?

Rename Domain Name where running Sharepoint 2013

Hi,
I want to change my domain name, from abc.com to def.com.
the thing is, we have more than 20 user in this domain and running share point 2010 there, and its architecture like 1-WFE Server, 1-APP Servre and 1-SQL Server.
how i can do this, without effecting my users login and SharePoint Application.
Share Point uses several user accounts from domain for different services and SQL aswell, also we have enabled FBA (Form based Authentication) for share Point.
waiting for your valuable reply.
Mafeer CM

Hi Mafeer CM,
To rename domain, please check this article:
How Domain Rename works:
http://technet.microsoft.com/en-us/library/cc738208(v=ws.10).aspx
Please note you need to be sure that all AD-based applications and solutions you have fully support AD-renaming and also take a system state backup of at least one DC/DNS/GC server in your domain.
For more detailed information, please refer to this thread:
Want to change domain name:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/f5efbce6-562f-429e-b204-f4b63fd8e40b/want-to-change-domain-name?forum=winserverDSFor
the configuration and influence of Sharepoint part, I recommend you can post in Sharepoint forum for more effective support:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/home?category=sharepoint
I hope this helps.

How effective does iPhone 4 sync with Microsoft Exchange

Hello,
Sorry for a possible repost but I did try to search for this topic but didn't find anything.
I'm really into the new iPhone 4 to use as a business phone. I have a Dell PC with Windows XP. The most important thing for me regarding iPhone is that the sync with Microsoft Exchange is flawless.
Can somebody (who has an iPhone and Microsoft Exchange) tell me how effective the sync is with iPhone and Microsoft Exchange? Does the e-mail sync quickly and how does the sync work with contacts and calendar. If I put a new calendar item in Outlook does it appear on my iPhone without me asking it to sync and etc.?
Please do share your experience

Can I put the sync settings on the iPhone 4 to only sync between certain time interval? Say, monday to friday from 08am to 7pm?
If you want push sync, then, no, you can't set a time interval. The entire point of push support is that the server notifies your system whenever something new arrives or something is changed. If you want to control when your iPhone contacts the server, then you can't use push. You can have the system fetch data at a set interval, or you can set to do it manually, if you prefer, but there's no setting where you can set a time window.
And can I put the sync settings only to store a certain amount of e-mails? Say the 100 newest?
You can set how may days of mail to sync, and also how many emails to show.
You might find the the user's guide helpful in learning about features and settings:
http://manuals.info.apple.com/enUS/iPhone_iOS4_UserGuide.pdf
Regards.

How do i use my own domain name with creative cloud?

how do i use my own domain name with creative cloud?
i don't want to post web pages from behance.net. i want to use the domain name i have for my material. is there a hosting service for this? if not, can someone give me some pointers so I can publish?
thanks!!
Lori

http://forums.adobe.com/community/behance is where you would ask about publishing to "something else" from that program
I use OLD Dreamweaver, and upload my HTML with an FTP program to my own web site... I will GUESS you can do that, if you can save HTML to your hard drive to then be able to upload to your web site

How to Install Visual Studio 2010 on a PC with Microsoft Office 2013 with 64 bits

I am with problems to have acess to the link: http://www.microsoft.com/en-us/download/details.aspx?id=12187
Why?
I want do install Visual Studio 2010 on a PC with Microsoft Office 2013 with 64 bits. How can I do it?
Thanks.

Hello Carla Sofia,
Visual Studio installation do not depends on Microsoft Office 2013. They do not have relationship here. I think your problem is that you cannot find the link to install Visual Studio 2010.
In order to know why, please see here:
https://support.microsoft.com/en-us/lifecycle/search/default.aspx?sort=PN&alpha=Visual%20Studio%202010&Filter=FilterNO
The mainstream support for Visual Studio 2010 is already expired and that is why you cannot open any link about Visual Studio 2010 Setup.(I cannot verify whether that link is about VS2010 Setup.)
I think you need to think about the following:
1. If you need Visual Studio 2010, you may have to consider some other channels. For example, official site you can try use MSDN Subscription. For non-official site. Sorry I cannot provide any place for you
2. You can use other latest version of Visual Studio, for example, we have Visual Studio 2012, 2013, 2015 for you to use. You can also use Visual Studio Express 2010 version. It is still available for download.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Changing AD Domain name with Microsoft Exchange 2013

Similar Messages

Maybe you are looking for