Changing Administrative data in Layout set (SE71)

Hi All,
I have copied another system layout set extract & uploaded into my system by changing user name in the extract.
But i got few fields wrongly updated in Adminitstrative data. I have already made some changes to layout set. so i can't upload again.
Now i want to change fields: Created On, By, Release: & Changed on, By, Release:
fields in the Administrative data tab in header data of layout set(SE71).
Can anybody tell me how can i change this data!
Thanks,
Deep.

Hi,
If you have authorizations to open the layout in Change mode then you can change the fields names as well as Values By knowing the correct field names.

Similar Messages

How to check changes made in standerd layout set

Hi abaper's
How to check the changes made in the standard layout set , other than using Utilities--- -> Print preveiw ?

Hi,
In ABAP there is no chance to check the version managment of the script , the better option to get this is to develop a small tool as follows:-
Every time u release the request of a script or layout just import that layout with (layoutname_request) no in application server. and using this RSTXFCOM program u can check transported one with existing.
Note: Everytime while checking transported one make it a local layout in RSTXFCOM we can check two layout differences.
Thanks
Pathan

Change OS date in a RAC (9i,10g,11g)

Hallo,
Oracle RAC installation guides warn to keep every RAC nodes synchronized, but I wonder if
it is possible to change OS date (that is setting a new date or time) of RAC nodes in a "rolling fashion" (one node a
time) whithout having side effects.
Thanks

If you manually ("hard") set the clock i would recommend shutting down the database and clusterware. The cruicial point here is the hard stepping...
Oracle recommends using ntp with "-x" aguments which will speed up or slow down the system clock but never sets the clock hard.
There is a bug at metalink: "Bug 5015469 - OPROCD reboots node when system date goes backwards". So for instance if you change your
time to the past the node might reboot.

How do you set a start and end time based on changes in data averages?

I am making a VI to collect data from a calorimeter that will detect automatically when I have triggered the combustion by recognizing a rise in the average temperature, and then will record data from that point until it the temperature rise stops or plateaus. I have worked out how to average my data, how to write it to a file, etc. but I don't know what the best way to construct my VI to automatically respond to changes in the average would be. It seems to me that there are a number of ways to do this, but I am fairly inexperienced with LABView and don't know which is best.
Does anyone have any ideas, specific advice, or general thoughts about using fluctuations in data averages to set start and stop times for a VI?

Lynn,
All great points - thank you for your thoughts. You are right, I am interested in selecting a subset of my data in which the temperature is rising, not setting start and stop times.
I realize that it is difficult to give concrete advice without more information, but I'm hoping that with some clarification on my part you might be able to give a few suggestions. The calorimeter I am working with is a microbomb calorimeter, which combusts small, dry biological samples in a pressurized, oxygen environment, and it does not have a water tank or other components on other bomb calorimeters. The data I am recording is mV signal from a thermocouple ring that the microbomb rests in. To directly answer your questions, I would say I am measuring detonations, or more specifically the electrical potential generated in the thermocouple due to the temperature increase of the stainless steel bomb. The data is fairly noisy, so I have previously been averaging every 1000 data points together in order to observe the temperature increase clearly.
The only plateau in the data that I have observed that I need to deal with is at the peak of the temperature increase, when I would like to put my second timestamp/end my data subset. There is a slight lag time due to the rate that the steel heats at, so the entire measurement can take 30-40 seconds even though the combustion occurs in seconds. What I would like to do is have my VI observe and respond to the averages that it is already making, and then by some means, like an increase/decrease beyond one or two standard deviations, for example, and then set the datapoint before the increase as Time 0. Then I would like to identify the end of the temperature increase/end of the datasubset by similar means as the increase levels off. Finally, I want to integrate the curve of the increase and display the integrated value for my users.
I would appreciate any thoughts. I don't have any raw data to share, but I do have a TDMS of the averaged data from a calibration test I did combusting benzoic acid. I'm not sure how much it will help, but I'll attach it regardless.
Thanks,
~nat
Attachments:
benz_test.zip ‏76 KB

How to change layout set in KM room part...

Hi,
My company is currently using EP6 SP15 and is in the process of trialing the use of Collaboration room.
One of the feedback from our users is that they do not like the layout of the KM document room part. What they would like to use is the "Tree list Preview Explorer" layout. Can someone point me to any documentation on how this could be done?
Thanks,
Thomas Siu

Hi Thomas,
It is easy to do this for a single room to experiment
before changing the iView settings for the template which would affect new rooms. You can go into the Details for the root folder of your room part and call up the "Presentation Settings". Then choose the "ConsumerTreeListPreview" as the Layout set.
In my rooms I typically add a set of extra links in the Room Links iView (perhaps restricted to the admins) that provide an Admin Explorer view and a WebDAV link. These look something like this:
https://myportal/irj/servlet/prt/portal/prtroot/com.sap.km.cm.navigation/room_extensions/cm_stores/documents/workspaces/XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX?rndLayoutSet=AdminExplorer
javascript:document.write('<div id=mydiv><a href=https://myportal/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/room_extensions/cm_stores/documents/workspaces/XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX/ folder=https://myportal/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/room_extensions/cm_stores/documents/workspaces/XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX>Click here if page fails to redirect.<\/a><\/div>');mydiv.addBehavior('\x23default\x23httpFolder');mydiv.navigateFrame('https://myportal/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/room_extensions/cm_stores/documents/workspaces/XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX','_self');
Obviously, you need to change "myportal" to your portal name/domain and "XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX" to your room store GUID. These links make maintaining room content easier.
I also typically make the top folder a bit prettier by using a taxonomy-like view with a grid of big folder icons with be links.
Regards,
Darin

Cannot change number of rows in layout set

I have created a layout set with a custom Collection Grid Renderer to show XML forms news items. I have changed the <i>number of rows</i> property to <i>3</i> to set the number of items to display to 3, but only one item is displayed.
I have changed this setting successfully before. Does anyone know why this is happening?
Thanks in advance!

Is there really nobody out there who faced this problem?
Please help!

How to do changes in Layouts setting and SAP scripts to meet requirment?

hi SD gurus,
Please explain me how create and work with Z output .
where and how we do changes in Layouts setting and SAP scripts to meet the user requirments.
pls forward func spec of Z output
points will be rewarded
thanx & regards

you need ABAP skills to do this.
basically you need:
1) draw the layout on a piece of paper
2) define the fields you need and find out the corresponding SAP fields
3) check the document with the customer
4) give this specification to the developer
5) the developer will give you a program name and form name: place them in the message for the document.
Roberto

How to change a folder layout set using KM api?

Hello,
I'm developing a program using KM api that creates different folders with properties, permissions, ... I want to use a different layout set depending on the folder that i am browsing, but these folders are created dinamically, so I cant set a different layouts set for each one manually (Details > Display > ...).
Does anybody know how I could do it using KM api? I mean, that every time I create a folder using KM api I should assaing dinamically the default layout set for this folder. I searched in the api and examples and I didn't find anything.
Thanks in advance and best regards,
JC

Hi all,
Problem solved... I decompiled standard code and I did what SAP do when they want to change a folder layout set:
IResourceContext context = ResourceFactory.getInstance().getServiceContext("cmadmin_service");
com.sapportals.portal.security.usermanagement.IUser puser = context.getUser();
ICollection collection = (ICollection)ResourceFactory.getInstance().getResource(RID.getRID("folder_path"),context);
IRepositoryServiceFactory factory = ResourceFactory.getInstance().getServiceFactory();
ILayoutService layoutService = (ILayoutService)factory.getRepositoryService(collection, "LayoutRepositoryService");
ILayoutContext userContext = layoutService.getContextForUser(puser, "");
ContextProperties commonProperties = new ContextProperties(layoutService, collection, userContext.getAnonymousContext(), layoutService.getProfiles(), new HashMap());
commonProperties.initFromPersistence();
commonProperties.setSelectedProfileID("LayoutSetProfile");
commonProperties.setSelectedLayoutsetID("ID_of_my_layout_set");
ArrayList errormsg = new ArrayList();
commonProperties.save(null, errormsg, false);
Thanks and regards,
jc!

Changing Default Layout Setting - User-specific

Dear Gurus,
This is related to general ALV Layout setting. When we choose Select Layout -> Choose Layout, the default layout setting will show All, is there any way by which we can change this to User-specific Layouts by default? (may be through some parameter id?).
Many Thanks!
Best Regards,
Sree.

Hi ,
Can you explain me your requirement in detail.
Regards,
Rohan.

How Long until layout set changes are effective?

I have made a copy of an SAP layout set to my own namespace. When I modify some of the associated command groups, the changes are NOT showing immediately when I apply the layout set to a km folder. I did find the 'rendering' cache setting under config and set it to a smaller value (was 1800 seconds : I made it 60 seconds), seemingly to no avail I have used rendering debug mode and verified that my layout set is being applied. Is there some other settings/cache etc that I can tweak?

Hi Hurton
Here's how I usually get around this problem:
1) Save your changes in the associated command group like you normally do. At this point the changes does not show.
2) Remove all commands in the associated command group, you are making the changes to using "Shift+DEL". Save the command group with no commands entered.
3) Enter the commands again into the command group using "Shift+INS". Save your changes.
Your changes should now be visible. Hope it helps.
Regards,
Martin

My calendar date is not automatically changing, what's the proper setting?

My calendar date is not automatically changing, what's the proper setting?

If the population of the ObservableList (independent of any UI considerations takes a long time, then you probably want to do the populations off the JavaFX application thread (e.g. via a javafx.concurrent.Task)).
If you do populate the list in a Task, standard threading cautions apply in terms of not updating items in the scene graph off the JavaFX application thread and ensuring that the system is absent of race conditions, etc.
Look over the documentation of http://docs.oracle.com/javafx/2.0/api/javafx/scene/control/Cell.html and that may help you.
The JavaFX controls such as ListView have been carefully designed to exhibit high performance even when backed by extremely large lists (through the concept of virtualization explained in the Cell documentation). For example, if the backing list is updated but the portion of the list being updated is not within the currently displayed list contents, (I would hope) the update would be very efficient.

My app store is saying i have to change date and time setting to get a secure connection but the date and time are correct please help?

My app store is telling me i have yo change date and time setting to download apps and idk what is wrong cause date and time are correct

Is the Time Zone also correct?
Also see:
Can't connect to the iTunes Store

I changed my data plan yesterday. I should have set it to change at the new month which is tomorrow. can i fix this?

I changed my data plan yesterday. I should have set it to change at the new month which is tomorrow. can i fix this?

I don't know if they'll be able to change it or not, but it's worth calling Customer Service ASAP (since you indicate your billing cycle starts tomorrow, so that would be midnight tonight) and asking.
Customer Service
Dial *611 from a cell phone
(800) 922-0204
Monday - Sunday 6 am - 11 pm

How to change the standard layout sets in ALV List

Hi Gurus,
How to change the standard layout sets in ALV list.
Is there any standard program ? or specific way to acheive this?
Kindly drop some clues?Every valuable clues rewarded more points........
Thanks in Advance,
Dharani

Hello Dharani
All required function modules can be found in function group SLVC (assuming that you are using OO-based ALV or, at least, fm REUSE_ALV_GRID_DISPLAY_LVC):
LVC_VARIANT_DEFAULT_GET (Read default display variant (description only, w/o field catalog))
LVC_VARIANT_EXISTENCE_CHECK
LVC_VARIANT_F4 (Display variant selection dialog box)
LVC_VARIANT_SELECT (Read a display variant)
For a sample report using LVC_VARIANT_DEFAULT_GET have a look at BCALV_GRID_10.
Regards,
Uwe

ICal sync- alert says will delete all past entries- Yes, I have my Keep Appointments set to "forever" AND I've tried changing the date range in desktop mgr- HELP

I just did the update for the software on the 8530. This is a new problem since the update. I cannot lose my old entries, so I am unable to sync at all now until Blackberry addresses this bug.
I have read through all of the "fixes" but none of them work.
My Keep Appointments setting has always (and I verified is still) set to "forever"
I went into the advance settings on the MAC desktop software from Blackberry and tried changing the date range to the suggested 14 days past and 365 days future. I even tried changing the past days parameter to "1" in hopes it would simply ignore old entries... It still wants to delete 435 past entries.
I have to keep these.
Help, Blackberry! Your "update" to the software is overriding my settings and has made the sync function unusable.

Christina,
Thanks for the reply. I unchecked all calendars in iCal and synced and it still gave me the same notice. So then I went into the iTunes window and checked the sync only certain calendars box (instead of the all calendars box) and left all the calendars unchecked and clicked apply but when I click on sync it automatically reverts to all calendars.
When you say you unchecked all calendars did you mean in iCal? And what did you have your iCal settings at in your iTunes sync window?
I appreciate your help,
Andrea

Changing Administrative data in Layout set (SE71)

Similar Messages

Maybe you are looking for