Changing an already existing podcast, urgent, please

I have just added a new podcast to Itunes about the metal group Warattah. But I made a mistake and I have clicked on the content as explicit, which it is not. If I want to change it (what I already have) iTunes sais that the feed exists already. Help me please.

what did you use to create the podcast & RSS feed?

Similar Messages

  • MCRM_SETTINGS  report cant change the already existing consumer

    Hi Middleware gurus,
    I have a problem in setting up of  CRM middleware setup with ECC .  The scenario is ECC is connected to CRM already and data is transferred, so as a result of that for all the objects in CRM the default consumer is CRM.  And now due to some requirements , i want to connect this same CRM system to another ECC and so the requirement is to change this already existing default consumer to a new consumer as per the new ECC system.
    SO, I ran the report MCRM_SETTINGS to change the consumer but the result says- the object is already a consumer.
    So, now the question is - cant i over write the already existing consume  to a new consumer...
    Regards,
    Neni.

    Hello Neni,
    In case you want to connect 1 CRM to 2 ECC systems, you'd be following a MEP(Multiple Exchange Projects) scenario and not a MCRM setting so MCRM_SETTINGS won't be useful here.
    Or do you want to disconnect the first ECC and connect a new ECC to the same CRM?
    can you please clarify?
    BR,
    Rohit

  • How to track changes in Customer master. Urgent Please

    Hi ,
    in VD03 for a Customer, when looked for changes made.
    Enviornment -> Account changes -> All fields.
    and then selected All changes, it shows me number of entries are deleted, I am wondering about why & how this happened and wanted to trace down,
    Can you guys help me,
    I looked at CDHRD table and found the entry but this is shown as BatcH..how can I trcae down, pls let me know.
    Thanks & Regards
    Sharat
    Message was edited by:
            Sharat Reddy Tekulapally
    Message was edited by:
            Sharat Reddy Tekulapally

    Hi
    You can go to tcodes VD04 or XD04 for individual customer
    For multiple customers, you can make use of the tcode OV51,
    Rewards pls.

  • Win App Deployment include SQL 2008 Express - Check if any SQL Server version already exist

    Hi there
    I have a application that is deploying and installing correctly (Setup and Deployment Project in VS 2008) and has SQL 2008 Express as a pre-requisite. SQL Express installs fine if not found but I don't want it to be installed if any other version of SQL
    Server already exists on the target computer. What do I have to adjust in the Bootstrapper package (package.xml or product.xml)  for SQL Express to do this check? Is the change done within the Bootstrapper package? Do I have to create a Custom Action
    in my Deployment project for this check? Any help is appreciated.
    Thanks
    Dweezil

    Hi Dweezil,
    If you use SQL Express Bootstrapper, you can add the SqlExpressChk.exe package file in the product.xml to check that if SQL Server is already exists. 
    However, please note that SqlExpressChk.exe is limited to only the default instance name, SQLEXPRESS, it won't detect other named instances. A registry check is required when detecting existing SQL Server with custom instance name.
     For more details, please review this
    blog.
    There is also a similar thread for your reference.
    https://dotnetinstaller.codeplex.com/discussions/245326
    Thanks,
    Lydia Zhang
    If you have any feedback on our support, please click
    here.

  • Message : Event package cannot be changed; bookings already

    When i tried to offering event using i got following message  : T-code :  PIQACADOFFER0   
    "Event package cannot be changed; bookings already exist"  Message no. HRPIQ00OFFER109
    Event is not created for this event package and i wander this is new function in EP3 that i have to override
    or just program error.
    regards,
    jin dal

    Jin dal,
        System is using view table V_PIQMODBOOKED to check no of booking.
    Check is there any active booking record exists for that event package? Which make sense because first you build event plan (event and event package) then you allow students to book.
    Prabhat Singh

  • Is it possible to change out of the box Callout content for already existing library using some javascript API ?

    Is it possible to change out of the box Callout content (change DOM elements) for already existing library using some javascript API?
     API ?

    Hi,
    We can use CSS and jQuery to achieve it.
    Please add the following code into the Content Editor Web Part.
    <style type="text/css">
    .js-callout-content{
    display:none;
    .js-callout-mainElement span{
    display:none;
    .js-callout-mainElement{
    border-width:0px;
    </style>
    <script src="http://code.jquery.com/jquery-1.10.2.min.js" type="text/javascript"></script>
    <script type="text/javascript">
    $(function () {
    $("a[title='Open Menu']").click(function(){
    setTimeout(function(){
    $(".js-callout-body .js-callout-bodySection").eq(0).html("<span>Test</span>");
    $(".js-callout-mainElement span").show();
    $(".js-callout-content").show();
    $(".js-callout-mainElement").css("border-width","1px");
    },1000);
    </script>
    Result:
    Best Regards
    Dennis Guo
    TechNet Community Support

  • Update Terminated change pointer ID already exists

    Hi  All,
    While we are creating the article or purchase info record creation.
    When I checked the SM13 i got this error.
    Update was terminated
    System ID.... RDP
    Client....... 510
    User..... PRASH
    Transaction.. XK01
    Update key... 4993DEF56A574020E1000000AC19005E
    Generated.... 12.02.2009, 19:22:54
    Completed.... 12.02.2009, 19:22:55
    Error Info... B2 050: Change pointer ID already exists
    Please suggest.
    Regards,
    Prashant

    Hi Prashant,
    Can you share with me, how you solve this problem? I'm encounter the same thing when using Tcode: FK02 to change master data, with same error message. Thanks.

  • Central Administration not Available, STSADM password reset errors "job-admin-apppool-change" already exists

    Hi Everyone,
    I think I've shot myself in the foot by not properly following set up instructions.
    I have a two-fold problem.  Firstly, my Sharepoint Central Administration V4 site is showing
    Service Not Available.  This seems to be related to the credentials the
    Central Administration V4 Application Pool - hitting Test Settings within
    IIS Manager for the site shows an Authentication and Authorization error for the credentials due to a bad password.
    My reading indicates that I should run something to the effect of:
    %STSADM -o updatefarmcredentials -userlogin DOMAIN\username -password <new password as set via AD>
    This runs into the following Error message
    Error deploying administration application pool credentials. Another deployment may be active. An object of the type Microsoft.SharePoint.Administration.SPAdminAppPoolCredentialDeploymentJobDefinition named "job-admin-apppool-change" already exists
    under the parent Microsoft.SharePoint.Administration.SPTimerService named "SPTimerV4".  Rename your object or delete the existing object.
    I've tried searching out a solution but as yet have been unable to find a mechanism to resolve this error.  I have had a look through http://social.technet.microsoft.com/forums/en-US/sharepointadmin/thread/b7c17dac-1cd1-4f75-a031-e28e4fbfd2f7 but
    it doesn't seem to relate to the same problems - as far as I know the account from which the command is being run is a farm administrator and the problem seems to be the existing job rather than permissions errors.
    Your help will be much appreciated.
    Stuart

    Hi Stuart Weaver,
    Firstly, please check if the SharePoint 2010 timer service is running. If not, please start it manually, then check the effect. In addition to this, you can try to
    run SharePoint configuration wizard, then check the effect.
    Note: when you start the SharePoint 2010 timer service, make sure you input the latest password. The steps are as follows:
    Open services.msc, locate the SharePoint 2010 timer service, double click it, then click log on tab, input the updated password, then click apply.
    Hope this helps.
    Rock Wang
    Regards, Rock Wang Microsoft Online Community Support

  • Change Valuation Category - Urgent please !!

    Hi !!
    I need to change the valuation category of an existing material.
    When i wanna change it in Accountant View 1, the error message is "The valuation category cannot be changed for the following reasons:      
    Stocks already exist at plant level.
      Plant SLoc                       
       1358 1301                       
       1358 1302 ".
    But, the stock is cero. I see this in mmbe or mb52. Also, there aren´t current purchase documents. I see this in me80fn.
    SD is not install in the company.
    Any ideas ????
    Thanks in advance
    PS: If i want to change valuation category using MM01, the message is "Valuation category  does not allow split valuation"

    Hi,
    Why are you saying that you do not understand how to check the stock in previous period? It was written by Deepak how to do it.
    (Many treads are on this forum about VC change and stock reports.)
    My suggestion is that you should use (and learn) transaction MB5B. Please give the necessary information (material, plants, etc) and give the last day of the previous month in 'from' and 'to' selection fields as well.
    You will see the opening and closing stock for that day. You should eliminate it somehow...via MB1A + 201 + posting date in the past (then reset it via MB1A + 202).
    BR
    Csaba

  • Change Pointer ID already exists

    Hi All,
    I am creating material using BAPI_MATERIAL_SAVEDATA I am getting error message  "Change Pointer ID already exists"
    I need your inputs please to resolve this.
    Regards
    Martin

    Hi Martin,
    I think you are inserting dulicate keys,
    Keep the break point in function Module - CHANGE_POINTERS_CREATE
    Keep break point below.
    write change pointers and status
      INSERT BDCP  FROM TABLE T_BDCP  ACCEPTING DUPLICATE KEYS.
      INSERT BDCPS FROM TABLE T_BDCPS ACCEPTING DUPLICATE KEYS.
      IF SY-SUBRC <> 0.
        MESSAGE E050 RAISING DUPLICATE_POINTER_ID.
      ENDIF.

  • How do I change the apple ID associated with my dev account to a different, already existing apple ID/account

    Hi,
    I currently have an iPhone Dev account, which is associated with a certain apple account.  I also have a different apple account, that I have already created.  I wish to change the dev account to use this other account.  I know you can change your apple ID, but I dont know how to change to an already existing account. When I tried to just change the appleID and email to match that of my other account, I just get an error saying that the email is already in use.
    Any thoughts?
    Thanks,
    rsm10

    Support - iOS Developer Program - Account Management

  • How to change the excel file name which already exists

    Hi,
        I want to rename the already existing excel file, is there any way to do it in Lab View. Please help me in this regards.
    Regards
    Shiva Kumar Singh

    Use the "move" tool with the current path and new path as inputs. It's in the File I/O...advanced palette.
    LabVIEW Champion . Do more with less code and in less time .

  • Email an existing excel file in background !!!urgent please ...

    Hi Gurus….
    I wrote an Abap that creates an excel file using the OLE methods for Excel.
    After that i am trying to send the file that Already I have created as an email Attachment.
    I am using FM 'SO_DOCUMENT_REPOSITORY_MANAGER' .
    The problem is that I want to schedule the work to be executed in background but I can’t do it because I can’t pass the Popup Window .
    I say again that the file already exists !!!
    Can anyone help me ???
    Please ….
    Points will be rewarded !!!!

    hi
    in background no body will see the popwindows
    u should stop the popupwindow in front end itself....
    put okcode = save...
    otherwise go to that functionmodule comment the window
    if u comment the window no problem it will process everything

  • I am using adobe photoshop elements 10.  my scanned photos. It scans the photo but an error  message comes up that says Nothing was imported because this picture already exist. However these are pics I have  never scanned before. Please--I have way too ma

    Adobe elements 10 Photoshop will not import my scanned photos.. I keep getting an error message that says the photo already exist. But I know that these photos have not been scanned in the past. They are not in my library.  The person in chat says I should come here to the forum and my question will be answered. 

        I can see that this issue has been quite extensive, and frustrating, and I am so sorry for all that has happened societygirl! I would like to help you work this issue out. Please follow & send me a Direct Message, so I can get your account specifics and help finally bring this to a resolution.
    Thank you,
    MichelleH_VZW
    Follow us on Twitter @VZWSupport

  • Purchase order already exists error for change Idoc 860

    Hi all
    I am getting an error that purchase order number already exists, when i try to post change inbound IDoc 860. How can I fix this issue?
    Thanks in advance

    This can be b'coz of Check purch.order no is active (A - Check whether the purchase order number already exists) in your sales doc type (TCode VOV8) used for the transaction.
    So, if for your business process, one PO number can be mention in more than one sales orders. Then maintain Check purch.order no should mention as <Blank>  - No Check under your sales doc type used for transaction's General Control. Or else use diff. PO Number.
    Hope this can assist you.
    Thanks & Regards
    JP

Maybe you are looking for