Changing an old Get URL

Hello,
I feel like I am losing my mind, and this may be a very easy
fix that I am overlooking, but I am trying to just change the Get
URL address of something that I did a long time ago. When I open
the file, I found 2 instances where I put in the new URL in place
of the old one, but when I test the movie, it still sends to the
old address. I have cleared my cache in the browser, etc.
Does anyone have an idea of what I might be overlooking in
trying to change the URL? I created a fade up movie for an icon and
I changed the address on the timeline and on the movie itself,
which were the only 2 places I could find the URL to replace.
You can see the website at
http://www.dirtcad.com
It is the fade up Blue Cross icon on the bottom right after
the movie loads that needs to be changed. I created this movie in
Flash MX and I opened it in Flash 8 and I am just trying to make
that one change.
Thanks for any suggestions.

kregg wrote:
> Hello,
>
> I feel like I am losing my mind, and this may be a very
easy fix that I am
> overlooking, but I am trying to just change the Get URL
address of something
> that I did a long time ago. When I open the file, I
found 2 instances where I
> put in the new URL in place of the old one, but when I
test the movie, it still
> sends to the old address. I have cleared my cache in the
browser, etc.
there really is no magic when comes to getURL action, you
simply editing wrong instance
and old action remain attached. You just remove the action in
a wrong place so it
takes no effect.
Upload the file and let us check, much easier than trying to
guess from here
Regards
Urami
Happy New Year guys - all the best there is in the 2006 :)
<urami>
http://www.Flashfugitive.com
</urami>
<web junk free>
http://www.firefox.com
</web junk free>

Similar Messages

My ipad2 is asking old id password, when i go to forget password link for that id then I am not getting any mail to reset the same. Please help how can i remove or change the old id.

my ipad2 is asking old id password, when i go to forget password link for that id then I am not getting any mail to reset the same. Please help how can i remove or change the old id.

You cannot remove or change the old ID. This is Find My iPhone Activation Lock. You need to recover the credentials for the Apple ID originally used to activate the iPad.
Check your spam and junk folders.

HT204053 When updating some apps at the app store under an old apple id I get an error that id or password is wrong. How can one change an old id with a new id for these apps?

When updating some apps at the app store under an old apple id I get an error that id or password is wrong. How can one change an old id with a new id for these apps?

1. Launch the App Store
2. Select Store->Sign Out
3. Select Store->Sign In and replace the Apple ID with the one you want to use

HT5787 How can I change an old email to a new one? For some reason my old email comes up on my iPhone - and I don't get access to change to my new email which I have on my iCloud account on my pc. My AppleID works on my pc, but not on my iPhone!

How can I change an old email adress on my iCloud accout to my new email (the same as on my pc), as long as my Apple ID works on my pc but not on my iPhone?
Br
Finn

You would have to change it back to your old email address in order to turn off "Find My iPhone" on your devices. After you changed it back to your old address and deactivated "Find My iPhone" (activation lock) you could change your Apple ID to your new address again. Now it should wok on all your devices.

Change Content Type Hub URL -- AAM Configuration

Hello, we initially setup our SHarepoint Web Application with Default Zone URL https://sharepoint2.contoso.com. We created a Content Type Hub and configured the URL https://sharepoint2.contoso.com/...... in the Managed Metadata Service Application.
We now changed the URL for the Default Zone to http://sharepoint.contoso.com and the last thing to change now is the URL of the content type hub.
My Question is what exactly will happen when i set the new HUBURI with powershell?
We have published the content types from the hub with the old URL to many site collections and are using them for over 1.000.000 documents. I want to ensure that there will be no impact on the existing content types. Will there be any impact. Will they get
unpublished?

Hi UTTO,
According to your description, my understanding is that you want to change the URL of publishing Content Type hub.
In SharePoint, we should use only one certain zone to publish content type. If you change the URL to http://sharepoint.contoso.com in the Managed Metadata Service Application, you will not publish content
type via https://sharepoint2.contoso.com , and maybe get an error like “No valid proxy can be found”. You should only publish content type via
http://sharepoint.contoso.com .
A similar posts for you to take a look at:
http://social.technet.microsoft.com/Forums/en-US/56a58460-258f-4802-9997-acd7ff051a5d/publishing-content-type-with-hub-error-due-to-aam
I hope this helps.
Thanks,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

Is there change credit card details- URL link in manage my account missing

someone on this forum that has more brains than the online chat support do?
I have been trying for 4 days to get someone to find out why the change credit card details URL link is missing from my manage account area. I keep getting told the same thing over and over again...below is an example of the most recent conversation i had this morning...this is absolutely flaming useless...i should have ended the conversation before he got past the first line...
Patel: Thank you for contacting Adobe. We are available 7 days a week, 24 hours a day. Goodbye!
Rahni Verey: Hi Patel,
Patel: I am sorry for the typo error.
Patel: Hello! Welcome to Adobe Customer Service.
Patel: Hi Rahni.
Patel: We are facing down time error due to which the applications are not responding . Hence we will be unable to check anything, I request you to contact us after few hours.
Rahni Verey: I need to update my credit card information, but have not been able to due to site maintenace
Patel: We are facing down time error due to which the applications are not responding . Hence we will be unable to check anything, I request you to contact us after few hours.
Patel: I could have helped you, but we are facing internal application outage due to Server/System Maintenance and Updates. I kindly request you to Please Contact us back on 2-3 hours, We sincerely regret for the inconvenience caused and the loss you are facing with.
Rahni Verey: i have been trying to do this since Friday...its now Monday here in Sydney! How long is this going to take?
Patel: Request you to please wait for few more minutes, and the applications will start working fine again.
Rahni Verey: i am not having any problems with my applications...i want to change my monthly billing subsciption credit card details!
Patel: I do understand Rahni, in order to update the credit card details, you will have to go through the process of using adobe applications.
Patel: I have provide you with the steps, however if the steps do not work, you will have to wait for applications to work fine.
Patel: I will provide you the steps to update your credit card information.
Patel: .
Patel: 1. Sign in to www.adobe.com
Patel: 2. In the navigation pane or pop-up menu, click Manage Account. [ You may be prompted to enter your password to verify your identity. ]
Patel: 3. Under Plans & Products, click Manage Plan.
Patel: 4. Under Payment details, click Edit payment details.
Patel: 5. Make appropriate changes in the Edit Payment Method pop-up and then click Save.
Patel: .
Patel: .
Patel: You can use the below link to know how it's done page by page.
Patel: https://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting -creative-cloud.html
Rahni Verey: i say again, there is nothing wrong with the applications. Its your bloody server that is playing up...there is no option in account management for me to update my credit card details. i already know exactly how to do it!
Patel: Rahni, I can help with the credit card update, however to do that , I need to check with your subscription under our server, as I am not able to check any services, I am not able to help you currently.
Rahni Verey: is there someone there who can directly access my account and see what i am talking about. Its plainly obvious if you go directly into my account and try to change credit card details. The URL link for this function is missing!
Patel: No.
Patel: To help you on this, the applications must working fine.
Patel: I am sorry for the situation that you facing currently.
Patel: Request you to please try after some time.

Is this the link you have been using? Credit card https://helpx.adobe.com/utilities/credit-card.html

How to change an old email in ichat

iam trying to change my old email in my ichat but i can not change it because is asking me i need to call to my Provider to change my emaol and all my information i do not understand how i need to fix it

Hi,
If you have an AIM login set up in iChat it could be in email format and in some cases actually be a working email.
For instance Apple IDs from MobileMe are working Email and Valid AIM Screen Names
In iChat 4, 5 and 6 if you get to the Add Account screen (iChat Preferences > Accounts use the Plus button) you can select @mac.com then hit the Get an iChat Account and get taken to the @mac.com registration page
These look like email but are not but are Apple IDs and Valid AIM Screen Names
You can also register any email you want at the AIM registration page.
On the Jabber side of iChat the Jabber IDs you can register for are in the same format as email but rarely are.
The exception tends to be Googletalk names that are based on Googlemail names/IDs
As Eric says you can go to iChat Menu > Preferences > Accounts and highlight an account then press the minus Button to Delete it
(Then press the add Button and add a different ID/Name)
I have never seen any version of iChat tell me to contact my email name provider about changing it.
It can sometimes tell you that the Name and Password are incorrect.
Most often this happens with MobileMe and @mac.com names as they can have passwords created that are longer then the AIM servers allow.
If this was the message shorten your Password, both at the registration/account change point and in iChat to something that has no more than 16 characters.
Basically your question needs more info to be clearer.
What were you trying to do ?
What was the precise message ? (A pic would be great.)
<
11:01 PM Saturday; August 6, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Get URL by PCD in WD ABAP

Hello friends,
I'm developing a web dynpro abap applcation. My problem is when i'm pressing on button that need to open
bw iview.I am using the method CREATE_EXTERNAL_WINDOW from the interface IF_WD_WINDOW_MANAGER, now I need to send url as paramter.Is there any way to get url by pcd ( to get the url of bw iview )?
I'm doing it that way and not by calling NAVIGATE_ABSOLUTE method because when bw iview send me back paramters( with EPCM ) i want also to close it.
Thanks in advanced,
Udi

Hi Udi,
We had a similar requirement where we need to call a Transaction in portal with different values for its parameters.
Assuming that your BW iView will have NON-CHANGING Url path you can store that path in a abap table ( for multiple reports also) and then get the value when required.
If you need to pass any parameters with the URL you can concatenate it to the NON-CHANGING url part and send.
I hope it helps.
Revert back in case of queries/issues.
Regards,
Sumit Oberoi

TS1702 How do change the old Apple ID username and password to the updated username and password for the apps store?

How do you change the old Apple ID username and password to the updated username and password in order to get updated apps from the app store?

cbkitche wrote:
How do you change the old Apple ID username and password to the updated username and password in order to get updated apps from the app store?
Do you mean you kept the same account but you only updated your AppleID?
Just log out and log back in with new ID.
Note that the AppleID is embedded into the item at purchase and cannot be changed.
However, when you change your AppleID, it will link the old account name to the new account name so you will not have any problems updating apps using the new AppleID.

Get URL + load Movie

I am going from one Flash site to another and use the get URL
code just fine getURL("
http://www.site2.com).
When I get to site2 how does one pass loadMovie or other
commands to site2 flash from site 1 with the get URL command? Is
that a case for shared Objects?
Thanks

It looks like you are loading in an external .swf for the
thumbnails and the larger images for each section. If you want to
update a particular section's photos, then you can just replace the
old .swf with a new one with the same name. Your movie will then
use the new .swf when it is called to be loaded.
You should not use getURL() for any of this. GetURL() is used
to load a new .html document into a browser.

Change the end point URL in WSDL for web-service

Hi All,
Morning , could someone please help us with this question, we are stuck with this currently.
In SOA Suite 10g as well 11g we have a jsimple Java class whose one of the methods is exposed as a web service.
In the project it has created the WSDL as well and have deployed the .ear file to the servers from EM console successfully.
Now we need to migrate this web service to testing & production environments.
1. Could someone please let us know the steps as to how do we change the end point url in the WSDL for this web service (present in web content --> WEB-INF/wsdl path in the j-developer project) for migration in case of both 10g (OC4J) as well 11g (WLS) servers.
2. Also could this change/update be done prior to deployment as well as post deployment as well.
Looking forward to inputs regards this...as we are stuck with this ..would be very helpful
Thanks as always for help & guidance..

Hi
As Vijay mentioned, you develop a WebService in JDeveloper and test in JDeveloper integrated Weblogic Server say at http://localhost:7101/MyWebService/MyPort?wsdl. Thats it. Once it is working. Export it into a .WAR file. If you have any other supporting EJB JARs etc, put all these into a full blown .EAR at application level. NOW deploy this .EAR or .WAR into any Domain on any host and any port. DOES not matter. That server's host and port will be taken. Infact even if this other domain is Clustered domain, still it will work by giving webserver host and webserver port that sits in front of the cluster.
I develop my webservices in JDeveloper and test at 7101 port. This .WAR gets deployed in QC Env at qchost:qcport. Same .WAR deployed to UAT at uathost:uatport and finally to prod also at prodhost:prodport.
Its just the Client (WebService Proxy) that is calling this WebService need to use appropriate host and port based on which Env it is connecting to. For this, simply do not hard code WSDL URL in the java code or anywhere. Simply get it from a .properties file using a key value pair like this.
WSDL_URL=http://host:port/MyWebService/MyPort?WSDL.
Now have Environment specific values for above key and put that properties file in that domain root folder. And in your code always refer this key.
You can use many approaches along the above lines.
If your WebServies proxy is a webservice adapter say within bpel, still you can modify the value using deployment plan .xml file file while deploying.
I would not absolutely prefer opening war file from ear and modifying war and updating ear file etc etc. Also do not have multiple EARs for Environment specific. Just have only one single EAR or WAR file that can be deployed to any environment.
Thanks
Ravi Jegga

HT1222 how can i change the old owners keychain password into mine

how can i change an old owners keychain password into mine so i can update software

Create a new keychain.
I'd generally suggest acquiring and wiping and installing the most recent version of OS X onto the system that it'll support, as you'll spend more time and effort undoing what was done before. You can usually get the proper distro with a call to Apple.
Given the iBook is PPC, you'll be limited to Leopard (10.5) at most, and possibly not that version.

I would take to change my old mac book by a new

I would take to change my old mac book by a new

http://www.apple.com/recycling/
You may though get better value if you can sell it to someone else as my FAQ* explains.
Note MacBooks do not run iOS. Your signature is a misnomer. Go to Apple menu -> About This Mac to find out your Mac OS X version.

I cannot change my old user ID from my Iphone to match my new ID on my pc

I set up my user Id on my Iphone 2 years ago but 12 months ago I changed ISP and I cannot change the old user ID on my Iphone to my new email address and cannot remember the old password. I have tried Settings>Store but only the new email address appears. If I try updates on my apps it asks for my old Id password and that is where I get stuck, If I go to appleid.apple com it also only tells me that I have only the new user ID. This problem seems to be within the Iphone software, do I have to do a backup and restore to factory defaults and if so are there any problems I may incur?

Apps are permanently tied to the Apple ID used to purchase them originally. You will always be asked for the password for this ID when updating them, regardless of what Apple ID you are using currently (in Settings>Store>Apple ID). This can't be changed. All you can do to stop this is to delete these apps from your phone so they don't try to update.

Can I change my old IPad 2 wi-fi on the new iPad wi-fi 3 g?

Can I change my old IPad 2 wi-fi on the new iPad wi-fi + 3 g?

Again, Apple does not themselves take trade-ins. They will recycle old iPods in an Apple Store and give you 10% off of the price of a new one, but that does not apply to iPads (and you'd be insane to take only 10% for any working iPad). Here's the program they have in the UK for getting value for iPad, iPhones and computers;
http://www.apple.com/uk/recycling/computer/
but again, you can probably get more for your current iPad by selling it yourself.
Regards.

Changing an old Get URL

Similar Messages

Maybe you are looking for