Changing animation frame rate when rendering in photoshop does not change the length of the video?

I made a walk cycle animation in Photoshop CS6 and want to render it into a quicktime format. I'd like it to be 12 fps, but when I rendered it at 12 fps the video seemed to be missing frames, and the video was 3 seconds long. I have 98 frames to my animation; doing the math, at 12 fps it should be 8 seconds long. Not 3.
I was confused and for curiosity's sake I rendered the video at 6 fps, trying to really slow it down. The video ended up being STILL 3 seconds long and only maybe 20 frames. I was missing literally 70 frames. I'm so upset with this rendering thing, I could chuck my computer at the wall.
Does anybody know of a solution to this?
edit: If it means anything, I've tried rendering it straight from the frame view and the timeline view. Each time I render it I have the timeline frame rate match the rendering frame rate as well.

floriannaart wrote:
Changing animation frame rate when rendering in photoshop does not change the length of the video?
Photoshop CS6 and CC support two types of animation Frame animations and a Video Timeline
Changing the frame rate should not change the length of a video timeline. It should just change the number of frames that are rendered. To change the length of a video you need to change the length of the video timeline. If you increase the length of the timeline and there is audio I'm quite sure there will be a problem with it, The Video part will most likely be better then the sound. The required number of extra frames can be generated however the video may look like slow motion. If you decrease the length the motion will speed up. The length of a video is normally done be editing video clips which are trimmed and stitched together to get the desired duration. Not normally done by altering the duration of a clip.
The duration a of Frame animation is the sum of the times each frame is displayed. In a frame animation the length of time a frame is displayed can be varied it not a normal motion picture video. To have a smooth frame animation you need a sufficient number of frames that are different from each other to show smooth motion. You can use Photoshop Frame animation tween feature to have Photoshop manufacture frames to help with a smoothing the animation. Once you have a frame animation the length with the motion you want you can have Photoshop convert it to a video timeline and render a normal motion picture video. It will not have audio but you can add audio to it.

Similar Messages

Could not complete the video frames to layers command because photoshop does not support video in th

When I attempt to import a video I get the message "could not complete the video frames to layers command because photoshop does not support video in this version of windows" I am running on windows 8.1 pro (32 bit), shouldn't this be compatible???????????

Unfortunatly, the 32 bit versions of windows doesn't support video in photoshop cc.
see this post:
http://forums.adobe.com/message/5802978#5802978

I imported a video and when I play it back, the audio does not match the video. When I view the tape in my camera it looks fine. I've tried imported twice and each time it doesn't match. What can I do to fix this?

I imported a video and when I play it back, the audio does not match the video. When I view the tape in my camera it looks fine. I've tried imported twice and each time it doesn't match. What can I do to fix this?

The default settings mostly likely use an audio sample rate of 32k. This doesn't work probably in FCP. You're probably better off capturing the tape in iMovie.

I took video using my Iphone 4S and uploaded it into my Macbookpro iphoto. When I open imovie it does not recognize the video when I import it manually it is distorted.

I took video using my Iphone 4S and uploaded it into my Macbookpro iphoto. When I open imovie it does not recognize the video when I import it manually it is distorted.

Did you ever get an answer to this? I just experienced the distortion when I imported a video from my iPhone 4 to iPhoto.

Firefox causes crash when using Youtube explorer does not have the same effect

firefox causes crash when using Youtube explorer does not have the same effect

Troubleshooting extensions and themes
* https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
Check and tell if its working.

Have Photoshop Elements 12, recently purchased Epson Workforce WF-7620 Printer/scanner , cannot import scanned pictures into Photoshop, does not see the Printer/scanner.

How can I get my Photoshop Elements 12 to import scanned images from my Epson Workforce WF-7620 ?. The program does not recognise the Priner/scanner.
Bruce

Is it trying to get you to join photoshop.com? The easiest way around that is not to use the welcome screen. Go into the program files and make direct shortcuts for the organizer and/or editor and start PSE that way from now on. Photoshop.com is dead and gone so the welcome screen will hang up trying to connect to something that no longer exists.

AE CS6 on Windows8: H.264 Coded generated very strange frame rates when rendering

funny things are happening:
I import 300 jpegs (canon 6D raw exported from LR as jpeg at max quality)
create a new composition (with 25fps)
render video in h.264 @25 fps
videos rendering works fine, plays well at external player.
drag and drop video from file explorer to AE project window:
framerate: 0.081
how does that happen and more important: how can this be fixed?
even more funny: until using 200frames to render, frame rate ist at 25fps,
having more frames in the video, framerate goes down below 1 close to 0...
is there some know issues with the h264 codec in ae?
thanks
Claus

Definitely. If you use a temporal (time based) codec like H264, the Render Queue will create inefficient results, as it can't look ahead or behind while it renders. AME can, which means you get superior compression results.
If you need to render from the Render Queue - for example, if you're rendering multiple output segments and formats in one pass - then use an intermediate codec, then convert to H264 later using AME or any other decent compression tool.

Photoshop does not open the requested file

Hi,
I installed the cs5 fxg ext. with extension manager on Mac OS X 10.6.3.
I think that went ok.
But... In catalyst (cs5) I have imported a jpeg file and want to edit it with photoshop. Catalyst gives the message "editing selection in photoshop jadaa jadaa"
It starts photoshop, but my picture is not opened in photoshop (also cs5)...
What's wrong?

I have the exact same problem...

Error Handling when excel vba code does not find the file

Hi Below is my code:
file1 = Dir("Q:\Budget\Historical Budgets\" & new_dept_folder & "\*.xls*")
col = 2
col_new = 3
Application.DisplayAlerts = False
While (file1 <> "")
        filename = Left$(file1, 6)
        ' Open the newly selected workbook
        Set wb = Workbooks.Open("Q:\Budget\Historical Budgets\" & new_dept_folder & "\" & file1)
        udds = filename & " - " & wb.Sheets("Budget").Range("J1").Value
        ThisWorkbook.Sheets(1).Cells(1, col).Value = udds
        For x = LBound(data_new) To UBound(data_new)
            wb.Sheets("Budget").Select
            Range(data_new(x)).Select
            Selection.Copy
            ThisWorkbook.Sheets(1).Cells(x + 5, col_new).PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks:=False, Transpose:=False
        Next x
         ' Close the current workbook
        wb.Close SaveChanges:=False
        On Error GoTo Errhandler
        Set wb_old = Workbooks.Open("Q:\Budget\Historical Budgets\" & old_dept_folder & "\" & file1)
<--- Need Error handling on this line (i.e. if I get error here)
        For x = LBound(data) To UBound(data)
            wb_old.Sheets("Budget").Select
            Range(data(x)).Select
            Selection.Copy
            ThisWorkbook.Sheets(1).Cells(x + 5, col).PasteSpecial Paste:=xlPasteValues, Operation:=xlNone,   SkipBlanks:=False, Transpose:=False
        Next x
        Application.CutCopyMode = False
        ' Close the current workbook
        On Error Resume Next
        wb_old.Close SaveChanges:=False
Errhandler:
        For x = LBound(data) To UBound(data)
        ThisWorkbook.Sheets(1).Cells(x + 5, col).Value = 0
        Next x
        ' Select the next file in the dir array
        file1 = Dir
        col = col + 5
        col_new = col_new + 5
Wend
Everytime I run the code the errhandler which I don't need. Could you please help me on this.
Regards, Hitesh

Hi,
You could check whether the file is exist, then open it.
If Dir(path)<>”” Then
There are three On Error Statements, On Error GoTo <line>, On Error Resume Next and On Error GoTo 0.
More information, please refer to:
# How to Use "On Error" to Handle Errors in a Macro
https://support.microsoft.com/en-us/kb/141571?wa=wsignin1.0
Regards
Starain
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I can receive texts from one contact but when I reply she does not receive the text. It does not say delivered when the text is sent but does not say that it has not been sent.

One of my long standing contacts cannot receive texts from me. I can see them from her. We both have iPhones . We have been texting for years.
My outgoing message is sent as iMessage and stays blue. It does not say delivered but it does not say that it has been unable to send.

Hello LaurenCheerio,
The following article provides some additional troubleshooting that may be helpful in getting your messaging issues sorted.
iOS: Troubleshooting Messages
http://support.apple.com/kb/TS2755
Cheers,
Allen

Photoshop does not release memory after closing document.

When I close a large document Photoshop does not release the memory. If I open another document the program is slow and not resposive. If I close out of Photoshop and restart it then load the other document it is quick and responsive again.

A bit late to the party here but this issue is still live and I can't find anything else on the forum similar to it (apologies if there is).
Photoshop does not seem to re-use memory it just keep allocating new right up to the limit before the prog crashes (same applies to Fireworks) so any batch/script processing of more than a handful of files is impossible.
I am Photoshop via Creative Cloud (so I am always updated to your latest release), Windows 7 64k with 8Mb memory and am using Norton Intenet Security 20.3.1.22 which is updated daily.

Changing frame rate when exporting from iMovie '09 using quicktime has no impact on duration. Why?

Changing frame rate when exporting from iMovie '09 using quicktime has no impact on duration. Why?
I have a file created by digitizing an 8mm film at a rate of 24 fps. I would like to create a downloaded movie at a frame rate of 15 fps. The Export using Quicktime option seems to provide that capability but the resulting file has the same duration as the original 24 fps file. How can I get the exported movie to be slowed down?

joegez,
There is a feature you can use to slow down the video. In the project, move the mouse pointer over the clip, then click the gear icon. That brings up the Inspector. Click the Clip tab. Then you will see a feature there called Speed. Move the slider to the left to slow down the clip. Or you can enter a percentage in the box on the right.
Hope this solves the problem for you.

Hello! I have installed Photoshop on PC WIN 7 64bit. When I store first time a Photoshop docuument, it works fine - after re-opening and doing changes I trying again to store it - it does not work anymore! First it does not accept the name (message "It ca

Hello! I have installed Photoshop on PC WIN 7 64bit. When I store first time a Photoshop docuument, it works fine - after re-opening and doing changes I trying again to store it - it does not work anymore! First it does not accept the name (message "It can not be stored because the nam is invalid" With 2. trial it tells me that the data is blocked and I don't have the rights - and I should chenge them. But I am working as the Admin on my PC - and each trial to change the rights of the data is as well not possible because of missing rights - even I am Admin! I must always store the data with a new name, then it works, but I also cannot remove the old datas or shift them into the waste paper - because of no rights! -- sorry for not perfect english, I am German native speaker! Tahnks a lot for help!

Hi,
I am using a Nvidia 4200M adapter in my Laptop, Driver 266.96, Direct X 11
In my desktop I am using an ATI XFX 6950, latest revision drivers (I am not at home right now so I cant get that info).
The issue I did describe above, but it was a long explanation.
In some flash games the game files load initially and get as far as the "click to start" button. Then the flash area usually goes either all white or all black (usually depending on the falsh game default background color) and then it stays that color. Cant see anything after hitting start (usually most games have an intro video or animation before the game starts, but I cant see any of it.
For the very few games that do start, the flash game or application does not seem to work correctly in that when the rare game starts, it wont save any game files or save files to the pc and so if I exit the game (navigate away to another page or close browser) and then later come back, even though I click the option to save games (and ensure that the flash application slider shows it can save files and lots of space) it does not save and I have to start from the beginning all the time.
More explanation I gave above.

I am trying to use the brightness adjustment on a grayscale photoshop CS6 file. The preview shows the adjustment working and changes the brightness, but when you click to apply the change, it does not apply the adjustment. I have run into this problem b

I am trying to use the brightness adjustment on a grayscale photoshop CS6 file. The preview shows the adjustment working and changes the brightness, but when you click to apply the change, it does not apply the adjustment. I have run into this problem before, although rarely, with some other files over the years and with earlier versions of CS. I would like to know how to overcome this problem?

Make sure you are viewing your image at 100%. At smaller views, pixels and layers and the way they interact are approximate interpolations and won't show you the actual pixel-for-pixel changes.

Posterize Time VS Preseve Frame Rate When nested

Hello Every one.
When Nesting Two Compositions with different Frame Rates, I heard Posterize Time, Is a old Effect that many people use it. But It can cause Lots of problems.
So, Is It better Inside Composition Settings- Advanced: To Check Preserve frame rate when nested or in render queue ?
Thank You.

If you have to preserve the frame rate, I would just choose to preserve the frame rate. However, there are many times when you don't even need to preserve the frame rate. So, if you don't actually need to preserve it, don't.

Changing animation frame rate when rendering in photoshop does not change the length of the video?

Similar Messages

Maybe you are looking for