Changing apple username and password on your iPad

Some water got into my iPad 1. I put it away in a drawer and bought the iPad 2. About eight months later I came across the first iPad, so I plugged it in. Sure enough it started working again. It had all my info on it and I want to give it to my grandkids. How would I take my apple username and password off of it?

I would say your best bet for this would be for you to do a update and restore in iTunes on a computer to make sure none of your info is on the device.  If you do not feel comfortable with that then you can sign out of the iTunes store and App store by going into Settings > (iTunes and App) Store > View Account > Sign Out

Similar Messages

  • HT5621 Want to change apple ID and password on 2nd Ipad to the one on my 1st Ipad.

    I have read the directions for how to set up an IPad but there is a problem.  I have 2 Ipads, one for work, and I set them up differently with different Apple IDs and passwords. Now I find out you can't buy extras for Apps you've already bought if you're using different IDs.  YOu have to buy the App again for the 2nd Ipad.
    How do I change the ID and password on my 2nd IPad to the one I use on my first IPad?  I know how to change one or the other, but don't know how to change both at the same time.

    Log out of iTunes on your second iPad and log in with the  Apple id you use on the first iPad.  The only minor issue will be that any purchases you made with the second Apple id will be locked to that id, and you will have to use that password to update apps.
    Have a nice day.

  • I am suddenly being asked to enter my apple id and password on my iPad, running iOS 6.1.3, has something changed?

    I am suddenly being asked to enter my apple id and password on my iPad, running iOS 6.1.3, has something changed?

    This is normal when downloading app or purchasing music, books etc. what are you doing when you are asked for the Apple ID and password?
    Perhaps you signed out of your Apple ID in Settings. sign back in.

  • How do you change your apple id and password on your iPhone?

    How do you change your apple id and password on your iphone?

    To change your Apple ID go to Settings>Store>Apple ID, tap the ID shown, sign out, sign back in with the ID you want to use.  To change the password go to https://appleid.apple.com/, click on Manage you account to the right, sign in, click on Password and Security on the left, the Change Password on the right.  If you change your password you will need to sign out on your phone, then sign back in using the new password.

  • I changed my Apple ID and password on my IPad but now cannot download apps because it wants my old ID and password which are no longer linked to ITunes.

    I Cash angled the Apple ID and password on my IPad but now cannot download any apps because it wants my old ID and password. It does not recognise the change of ID.

    Have you tapped on the id at the bottom of the Featured tab in the App Store app - when you do that you should get a popup with options for 'View Apple ID',' Sign Out', 'iForgot' and 'Cancel'. Tap on the 'Sign Out' option and log out and then log back in

  • Changed icloud username and password can't access other devices

    I have three devices from which I use the same iTunes and ICloud account. I changed my username and password on the accounts yesterday. Now I am only able to get it to work on my IPhone 5S. My daughter's IPhone 4 and my IPad will not accept the new passwords. I can't access FaceTime or IMessage on those devices as it keeps prompting me that it is incorrect and to reset. If I reset, it won't work on my IPhone 5S. Help!

    Welcome to the Apple community.
    If you mean that Find My Phone is asking for a password to a different Apple ID to your current Apple ID and that ID is a previous version of your current ID, not an entirely different one.
    This feature has been introduced to make stolen phones useless to those that have stolen them.
    However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details and some other circumstances.
    The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID using your current password, you don’t need access to this address if it’s previously been used with your Apple ID, once you have saved these details enter the password as requested on your device and then turn off "find my phone" and delete the account from your device. It may take a short while to remove the account.
    You should then change your Apple ID back to its current state, save it once again and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
    This article provides more information about Activation Lock.
    This is answer is provided from my own database of boilerplate responses and the content was last reviewed and tested on: 2014/05/23

  • HT204053 I cannot log into iCloud using my Apple username and password.  I keep getting an error message that states "CANNOT SIGN UP - The Apple ID is valid but is not an iCloud account."  How do I fix this?

    I cannot log into iCloud using my Apple username and password.  I keep getting an error message that states "CANNOT SIGN UP - The Apple ID is valid but is not an iCloud account."  How do I fix this?

    You are getting this message because you are attempting to create an iCloud account on a PC.  You can only create iCloud account on an iOS device (iPhone, iPad or iPod Touch) running iOS 5 or higher, or on a Mac running OS X Lion (10.7.2) or higher.  After creating your account on one of these devices you will then be able to sign into the account on your PC.

  • I have changed my username and password but the apps are still asking for my old username and password. How do I change that

    I have changed my username and password for my apple account but the apps previously linked to it are still asking for the old info. And I don,t know it so that's why I updated it

    Apps are permanently tied to the ID and password used to purchase them. If you do not remember that information, you cannot update them. If you ned these apps, you will have to repurchase them under your new ID.

  • Changing WPA Username and Password

    Hi Guys,
    I am quite new to Wireless. would appriciate any help on this issue.
    I am using a 891w as autonomous AP. I got some basic config from support forum.. Once configuration was done, i could see the SSID; but it was asking for username which i could not figure out. Here is the config below.
    hostname ap
    no aaa new-model
    dot11 syslog
    dot11 ssid WirelessNetwork
       vlan 1
       authentication open
       authentication key-management wpa
       guest-mode
       mbssid guest-mode
       wpa-psk ascii 7 cisco
    bridge irb
    interface Dot11Radio0
    no ip address
    no ip route-cache
    encryption vlan 1 mode ciphers aes-ccm
    encryption mode ciphers aes-ccm
    broadcast-key vlan 1 change 30
    ssid WirelessNetwork
    antenna gain 0
    station-role root
    interface Dot11Radio0.1
    encapsulation dot1Q 1 native
    no ip route-cache
    bridge-group 1
    bridge-group 1 subscriber-loop-control
    bridge-group 1 block-unknown-source
    no bridge-group 1 source-learning
    no bridge-group 1 unicast-flooding
    bridge-group 1 spanning-disabled
    interface Dot11Radio1
    no ip address
    no ip route-cache
    encryption vlan 1 mode ciphers aes-ccm
    encryption mode ciphers aes-ccm
    broadcast-key vlan 1 change 30
    ssid Wirelessnetwork
    antenna gain 0
    dfs band 3 block
    channel dfs
    station-role root
    interface Dot11Radio1.1
    encapsulation dot1Q 1 native
    no ip route-cache
    bridge-group 1
    bridge-group 1 subscriber-loop-control
    bridge-group 1 block-unknown-source
    no bridge-group 1 source-learning
    no bridge-group 1 unicast-flooding
    bridge-group 1 spanning-disabled
    interface GigabitEthernet0
    description the embedded AP GigabitEthernet 0 is an internal interface connecting AP with the host router
    no ip address
    no ip route-cache
    interface GigabitEthernet0.1
    encapsulation dot1Q 1 native
    no ip route-cache
    bridge-group 1
    no bridge-group 1 source-learning
    bridge-group 1 spanning-disabled
    interface BVI1
    ip address dhcp client-id GigabitEthernet0
    no ip route-cache
    cns dhcp
    end
    Please help me change the username and password for the SSID.
    I hope in the able example the password is cisco.
    Thanks you.

    Hi,
    This should be asking you only the password not the username as you have confired with wpa-psk. What client device are you testing this with? If this is wondows machine please choose your sececurity as WPA-Personal on the wireless profile and then it would asked for the Security Key..You will have to enter your password there. The password from the configuration i can see it as cisco.
    wpa-psk ascii 7 cisco
    Hope thats helos,
    Regards
    Najaf
    Please rate when applicable or helpful !!!

  • HT5622 My iPad will not take my Apple username and password since I upgraded to 7.0.2

    My iPad will not take my username and password since I upgraded to 7.0.2.

    try this
    Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
    If that doesn't work then reset the device by going to settings/general/reset/reset all settings  (or for network connection issues 'reset network settings').
    (no media or data will be deleted from the device, this will only take a minute).

  • HT201363 I need to delete an existing iCloud account that was set up on my phone using a previous Apple ID. Since the I've reset both my Apple ID and password (lost my iPad) I cannot delete the iCloud account from my phone because it is still under the ol

    I have an old iCloud account on my phone.
    This account was set up using an old Apple ID and password.
    Since then I've changed both id and password.
    In order to delete the existing (old) iCloud account from my phone I need to provide the old password from the old and defunct account.
    I don't remember that password.
    I've tried resetting it through the support network but to no avail.
    I need to delete the old account in order to set up a new one.
    Any thoughts?

    If the ID is yours but you don't know the password, you'll have to reset it (http://support.apple.com/kb/HT5787).  If the ID belongs to a previous ownder of the phone, you'll have to either get the ID and password from them, or have them erase the phone and remove it from their account as explained here: http://support.apple.com/kb/TS4515.

  • Changing Icloud username and password

    I have changed my apple ID and password on my iphone 5 but I cannot change my icloud user name and password, altough it has changed on my pc, how can I change it on my iphone

    Settings > iCloud > Delete Account. Then sign in with your other ID.

  • I have updated my Apple ID and password. My iPad however will not let me update the email. Why ?

    Having updated my Apple ID and password I find I am unable to update the iCloud and Apple ID on the iPad. Why is this not possible ?

    What happens when you try ? If you've updated the primary email address on your account then log out of your account by tapping on your id in Settings > iTunes & App Store and then log back in with the updated version, and similarly for iCloud : Settings > iCloud > Delete Account and log back in with the updated version.

  • I have an apple ID and password but my ipad is broken and they say they can't get in because they don't have my i cloud password.  I never set one up and don't know what one is

    My I pad broke after only a few months and now they won't mend it as they say they can't get in as my i cloud password not working.  I never even set one up?  I have an apple id and password but that's not enough for them to get in.

    Welcome to the Apple community.
    It's your Apple ID and password they want.

  • Changing DB username and Password for APEX

    Hello Guys:
    My APEX application is currently connected to the Main database, and now the business decided they want a user to be created with the main database only for APEX.
    My main database is called ARRA, and user within the ARRA schema called ARRAAPEX was created given a diffrent username and password.
    I see in the Administrative services I can only tell it to which schema to connect to, but where do I specify the username and password for the database user to be used by APEX?
    Thank You For Your Help
    Adel

    Thank You for your reply Roel. What I meant to say is Logging to the ARRA schema using the username and password associated with ARRAAPEX would allow me to see the Date last edited field that has been added to the ARRAAPEX. ANd I am not able to see that at this moment becuase I am logging to to ARRA using the ARRA username and password.
    When we setup a workspace and then associate a schema with that workspace, where do I specify the username and password that the workspace should use to access the schema? Or if a username and a password are not needed then how does the workspace access the schema?
    Thank You
    Adel

Maybe you are looking for