Changing Applet Window Size

I developed a few forms on 6i and was going to go ahead and migrate to 9i. However, my forms no longer fit in the applet window screen; the user would have to scroll over to see half of it now. The applet window now (not my own window but the window that has "Window" on the left side and "ORACLE" on the right) is only about 2/3 the length of the screen. I can see no way to change it right off...can it be done? if not, jeez, that's a pretty small window...also, I can only assume that the big "ORACLE" advertisement can't be taken off; is that right?
BTW, I am running Windows 2000.
Thanks,
Brian

To resize the applet just change the width and height parameters in the HTML that invokes your form.
You can also eliminate the Oracle Logo, its one of the parameters to the applet.

Similar Messages

How can I change the window size of iTunes? Used to be easy before installing Mavericks.

How can I change the window size of iTunes on my iMac? Used to be easy before installing Mavericks.

If you want to make the itunes tab so you can see the dock
you press the
esc
button if your in full screen mode
if you want to get into full screen mode you press the arrows facing away from eachother in the top right corner
there is another way to get to the normal tab if your in full screen
make the curser go right up to the top of the screen and it will show the apple tab
it will have two arrows facing together highlited in blue
if u tap that it will take you to the normal tab

HOW DO YOU CHANGE THE WINDOW SIZE OF EBUSINESS SUITE ON STARTUP

HOW DO YOU CHANGE THE WINDOW SIZE OF EBUSINESS SUITE ON STARTUP
How do you change the window size for Ebusiness Suite after you log in. Currently it displays at 100% of the screen. I want to set it smaller, at some %

I don't know if there is a way to set this. Some user's may prefer different sizes of window, depending on their job duties. For example, we have 170 Systems document management integrated with purchasing and payables so users shrink the Oracle window to fill about 60% of the screen while 170 uses the remaining 40% to display the scanned document.

How to change default window size?

I'm using MX 6.0 on Mac... For some reason I can't figure out
how to change the default window size in the work windows. Every
time I open a new file to work on it opens to a smaller size than
the actual page is. When opening pages dozens of times a day, it
gets annoying to have to resize each time. I'm sure it wasn't
always like this, but I can't figure out how to change it so the
default size that it opens to each time is larger.
Thanks for any help,
DD

Window | Workspace | Save Current
This gives you the opportunity to save a current layout look
that you like
You might also look under
Edit |Preferences | Status bar - but I don't see that this
does anything
in DWCS3

Possible to change the window size of a CHM file, when first opened?

Hi all,
Anyone knows if this is doable? I know lots of chm files that
open in different window sizes, suitable for their content. But
right now when I compile, it opens quite narrow, that I have to
resize manually.
Take care,
Tim

Hi Tim,
This is what I have done. In the Project Manager, expand the
Windows folder and double click the default window for your chm
file. This will open the window properties screen. There is a
checkbox that says something like "Remember Window Size" which you
can turn on. Regenerate your layout and view the resulting chm
file. It will be small and narrow still, but after you resize it
any subsequent builds in this layout will default to the size you
set.
Hope this helps and if there is a better way please let me
know!
Cheers
darkagn

Using SE71 - changes in windows size

Hi,
as per the standard settings, for the form F140_ACC_STAT_1,
the sizes of window are:
Window     Description                  Left      Upper     Width     Hght
MAIN    00 Main window                    7,00 CH 29,00 LN 71,00 CH 35,00 LN
ADDRESS    Address                        7,00 CH 11,00 LN 35,00 CH 10,00 LN
FOOTER     Footer text                    7,00 CH 65,00 LN 71,00 CH   4,00 LN
HEADER     Header text                    7,00 CH   1,00 LN 71,00 CH 10,00 LN
INFO       Information for first page    43,00 CH 11,00 LN 35,00 CH 16,00 LN
REPEAT     Repeat print                  43,00 CH 12,00 LN 35,00 CH   1,00 LN
Now i want to change left margin and width for Header window.
How can i change?
regs,
ramesh

Hi,
Hope after copying and making zscript from std u cud make changes to width and height.
If not ,
Once i faced a problem though i made a zcopy of std script the window dimensions were in non-display mode,
the copy had language issue so it was in non-editable mode.
Try this steps
goto utilities ->convert original language -> activate and tthen check
it comes in editable mode
Hope this helps
regards,
Simy.

How to Change Applet Windows Title in EBS 11.5.10.2?

Dear All, would like to check How do I change the Applet Form Windows Title in EBS 11.5.10.2?
Thanks.

Hi,
Anybody know how to change the wording in the red rectangle part ?Check my previous reply, it answers your question (login to System Administrator responsibility and navigate to Profile > System, search for the profile name, and change it at the Site level).
Regards,
Hussein

Change horizontal window size in XMonad?

Hi!
I just installed XMonad and I like it really much. It's possible to have two rows of windows and then change the border's position in X axis with ALT + H and ALT + L. But is it also possible to change change the size between two windows in a column?
Last edited by MaTachi (2011-08-23 22:51:09)

You should be able to do this with XMonad.Layout.ResizableTile from xmonad-contrib, which is in community.

Prevent PDFs from Changing Adobe Window Size & Position

Some PDF files have embedded codes to change the size and / or position of the Adobe (or Reader) window. This is a very irritating "feature" and is completely unnecessary, at best. I have looked through the various Preferences setting but nothing seems to address the problem. How do I prevent this from happening?
Thanks.

Thanks guys. Is there a way to prevent this action globally, i.e. for all documents, rather than just document-by-document after the fact? Any well-designed software would have a way to prevent documents from messing up my screen configuration, so I assume someone at Adobe had the wherewithall to have that as an option in Acrobat.

Any way to change the window size in Free Distort tool?

The little window that opens up when you selected the Effect -- Distort & Transform -- Free Distort tool is so small I can't get it to do what I want it to do. The minimum amount of distortion is about twice as much as what I'm trying to achieve. The anchor points are magnetic, and they either snap to the undistorted corners of the object bounding box, or else they snap outward to a degree that's much more than I'm trying to do. Here's what it looks like.
Any assistance greatly appreciated!
Butch

I don't know how to change the size of the free distort dialog. However, for your particular transformation, you could draw a rectangle that covers your type, distort it using the free transform tool (or any number of other tools), and perform an envelope distort with top object.
The resulting "live" object will be editable to the extent that you can modify the envelope shape after the distortion is applied (and have the text conform). However, the text itself will not be "live" (editable) as it would be with the free distort effect.

Changing the window size

I have iMovie 8.0.5. The window is wider than my screen and I cannot reduce it any further by clicking and dragging the centre bar or the bottom right-hand corner. Can anyone kindly explain whether it is possible to reduce the window so that it fits my screen?

Winston's advice to use the green button worked (so simple that I had not thought about it) and your own regarding the resolution works too. Thank you for both answers!

Changing window size of script in Non original language

Hi Gurus,
Is there any option to change the window sizes of a script in NON ORIGINAL language. Generally it wont allow to change window sizes in NON ORIGINAL language.Is there any workaround.Please help.
Thanks & Regards,
Sam.

It is not possible to change the window size in non-original language.. only changes of windows paragraph formats are possible in original languages...
If your form is global templet.. make sure you inform the user and on there approval do customise your form and do the respective changes..
Close the thread once your question is answered.
Regards,
SaiRam

Window size changed

While I was out today my husband decided to 'play' with my iMac. I came home and the size of the windows in Safari have changed totally. The windows used to go across most of my 22inch screen, but now it's not even half the size.
How can I change the window size again?

In the lower right hand corner of the window you will see 3 diagonal lines. Click on them and resize the window to the size you prefer.
Message was edited by: rkaufmann87

Can't use letter A - it changes window size

Whenever I use the letter A, upper or lower case, it changes the window size - first small and then big. Its driving me nuts. I can't type a word using "a", and my windows keep changing size whenever I use it. I'm obviously typing this on another computer.
I've rebooted, and I checked preferences and there is not a keyboard shortcut accidentally assigned to "a".
any ideas?

you could try another account; see if it has the same issue. (if it still happens its not settings)
you could enable the keyboard viewer; and see if pressing a is being registered as pressing another key
(apple menu, system preferences, language, input source, check keyboard & character viewer, click on thhe us flag on the menu bar, chose show keyboard viewer)

How to adjust the window size in overview screen of a scorecard ?

Hi Experts,
In SEM application is it possible to adjust the size of the "Perspective" windows in the Overview screen of a Scorecard ?
If possible how ?

hi,
If you change the window size of the script in the original language, it should reflect in the other languages.
Please activate the script in english once again and see the spanish form again.
@SAP_WIZ
As far as chaniging window size is concerned, Please edit your script in ES and then change it.Or login in ES and then edit the script.
This is not possible, because the original script is in english.
Regards
HM

Changing Applet Window Size

Similar Messages

Maybe you are looking for