Changing Asterisk Default RTP Ports - Have You Done It with Success?

We have an Elastix box at our main site, and we've recently had issues with people placing a call or two where they hear no audio with call drops after about 34 seconds. In these cases the person they called can hear them just fine. That's normally a NAT problem, and in this case it is as well.It turns out we have been allowing the standard UDP 10000 - 20000 back to the PBX in addition to SIP (UDP 5060) for Asterisk, but the provider is telling me they send traffic on UDP 1024 to 65534. What's very odd about this (using Broadvox Fusion) is that we have had ports 10000 - 20000 open since early 2013 when we moved to Elastix and not had this kind of problem reported since the last few months. We did a pcap with the SIP provider and called some of the numbers people have reported, and they confirmed the firewall is dropping packets.I've...
This topic first appeared in the Spiceworks Community

You won't lose your unlimited data as long as your account stays active and you don't purchase a subsidized phone. I just did this yesterday and it took just a few minutes over 24 hours to port my number over to GV. I still have unlimited data. I pretty much followed the instructions you have above except I waited about 7 hours to get a new number from VZW just to make sure there were no hiccups. VZW says you may get some overages if you change your number immediately as opposed to on the first day of your billing cycle because they prorate your minutes and texts used. Luckily I have unlimited everything so it didn't make a difference for me. I'm planning on going over to T-Mobile. My home is a dead zone for cell phones and I always have a weak signal and sometimes don't get my calls. I figure if I'm going to pay for an unsubsidized phone, I might as well go with a company that has wifi calling and a cheaper unlimited plan. I pay $94/mo before taxes with VZW; I'll only be paying $59.50 with T-Mobile for the same plan with 2.5 GB tethering included. T-Mobile here in LA is pretty good and even if I don't get LTE, I can fall back on their HSPA+ network, which is way better than VZW's crippled 3G network. No regrets porting over. The ONLY way I'll stay with VZW is if they allow me to keep my unlimited data (not going to do Verizon Max) and get a subsidized phone. CAN YOU HEAR ME NOW VERIZON?

Similar Messages

My tab default is1.25 which is too big for the A5 document I'm working on, how do I change the default tab so that I don't have to reset each individual line?

My tab default is1.25 which is too big for the A5 document I'm working on, how do I change the default tab so that I don't have to reset each individual line?

Hi Hannah,
Inspector > Text > Tabs Button > Tab Settings > Default Tabs.
To set a tab stop on the go, click in the ruler.
If you can't see the ruler, Menu > View > Show Rulers.
To set tab stops for lines (paragraphs) you have already typed, select those paragraphs and set them all at once.
Also, have a look at Menu > Pages > Preferences > Rulers.
Regards,
Ian.

Where are all my bookmarks - what have you done with Mozilla? you have screwed up my computer!

Everything I had on my tool bar, and all the sites listed in my Bookmarks are GONE!!!
What have you done with those sites? They were very important to me - I can not handle all these changes by Mozilla - None of these changes are of any use to me. I want to go back to my original screen and when I logged on today you would not let me access my internet and original screen without entering info that changed everything on my computer window!!! Help me find those BOOKMARKS
Mozilla Firefox is not user friendly - I don't want all these apps - EBay, Weather or YouTube! I had the necessary sites listed that are important and used everyday - not those listed. Who are you to determine what "apps" I should be using???
edit: email address edited out but it is likely too late for search bots grabbing it.

I'm desperate to get back my Bookmarks in the same unsorted way and easily accessible as I had previously - at the moment they are hidden away in some sort of zipped form I am unable to access: they were previously listed in the ideal way for me to access - as chronologically bookmarked and disparate. It really is infuriating to have this level of interference with my personal affairs on my computer without even seeking my consent. Ideally I want a return to the earlier version of Firefox which worked perfectly well for me - I'm plagued with excessive slowness and freezing since the latest -Firefox 5.0- update was installed. Is there any simple way to revert back to the earlier version of Firefox?

What in the name of Goodness have you done re: the full screen picture of Contacts on my iPhone? Sort it out Apple or I'm going back to Samsung, where maybe I should have stayed!

What in the name of Goodness have you done with the full screen picture of Contacts? How dare you just change it without so much as a bye or leave? This is NOT progress but a throwback to about 1997! I supposedly 'updated' to an iPhone two weeks ago. Should have stayed with Samsung I reckon. I am deeply unimpressed!

Bechepeziere wrote:
Who in that organisation actually decided this was progress? Unbelieveable!
stedman1 did it, yep, he's the one, blame him .

Data Guard with Oracle 9i and 10g -- have you done it?

We have an ERP system (JDEdwards, db size approx 600 GB) and we'd like to copy the data in this system to a database on another computer. We'd use the remote database for reporting, so we need it to be available. We are looking at using Data Guard running in Logical Standby mode.
The ERP database is Oracle 9i, and we are considering having the Logical Standby database be 10g. Have you done this and if so, what was your experience?
Here's why we want to do this. There are many tables in the ERP database that contain descending indexes. We can't change this, and it is not supported with Data Guard under Oracle 9.2. Tables with descending indexes do not copy to the logical standby database.
We were told that this is corrected in a newer release of Oracle, and we were wondering if a 10g database would properly copy tables with descending indexes.
Thanks in advance for any experiences you can share.
Best Regards,
Mike

What you are trying to do might not be possible. Because when you create logical standby you have to create a physical standby first and convert it. Primary and standby have to be same version.
In furture it might be possible because 10G will support rolling upgrade of logical standby.
However even it's possible you have to go through a lot of pain to setup and maintain it because Oracle don't support the setup.
What you could try are Stream and Replication, I will say Stream is very interesting one. Because Oracle say : "Oracle Streams and Oracle Data Guard (including Data Guard SQL Apply) are independent features based on some common underlying infrastructure and technology. "
http://www.oracle.com/technology/deploy/availability/htdocs/DataGuardStreams.html

How to change the default apex port

hi,
i am installed apex4.0 in EBS R12 DB with HTTP Server method. my apex is running from application server 10g and default port is 7777.
URl: http://hostname:7777/pls/apex
My EBS R12 running on http://hostname:8007.
is it possible to change the apex port to EBS Apache port(8007) in R12 and finally i want to change above URL like this
Before change : http://hostname:7777/pls/apex
After Change : http://hostname:8007/pls/apex
Thanks in advanace....

How to Change the Default SSH Port from Terminal ?
now showing default SSH Port 22 i need change it pls help me how can do

How to Change the Default SSH Port from Terminal ?

How to Change the Default SSH Port from Terminal ?

How to Change the Default SSH Port from Terminal ?
now showing default SSH Port 22 i need change it pls help me how can do

How to Change the Default SSH Port from Terminal ? now showing default SSH Port 22 i need change it pls help me how can do

How to Change the Default SSH Port from Terminal ?
now showing default SSH Port 22 i need change it pls help me how can do

How to Change the Default SSH Port from Terminal ?
now showing default SSH Port 22 i need change it pls help me how can do

IPad 3 light leak under the bezel? What have you done about it?

If you have an iPad 3. Tilt towards you, looking underneath the bezel (under the camera) has your iPad got any lights showing? It's not bleeding onto the screen, in fact it doesn't interfere at all under normal use of the iPad. I have read many forums and it does seem to be quite common,but i would like to know what have you done about it? Have you replaced within 14 days and got a brand new iPad and been satisfied ? Or have you had another with worse or different issues? Or have you ignored the issue and kept the iPad?
I walked into comet and the first iPad 3 I picked up had exactly the same issue. I asked the bloke, he said yes? It's no problem, it's common in led screens and with the iPads new retina screen your bound to get this problem on some but it's no problem as doesn't effect your everyday use. Not the point though is it, we pay 400-579 for this thing!
I also rang apple and they spoke with their technical team and they came back and said the lights under the bezel seems unusual. To try and restore the iPad and see if that solves it. Solves a hardware problem?? How did they get their jobs? Crazy. So now I am in the middle of returning the iPad for a replacement but I am debating whether to even bother as I have read a lot of replacements people have received have numerous other problems, like dead pixels, light leakage, scratches.
I would appreciate any feedback from those who have had this same issue and what did you do about it ?

Mine has some along the right side. It is very slight, and does not affect the screen,even with a black image displayed in a dark room. So I chose to ignore it. This iPad will be going back though, as the bottom half of the screen has a pink tint on it. My advice is to see if it affects a dark picture in a dark room. If it doesn't, I would keep it. But in the end, you have to make your own decision and be comfortable with it. :)

Apple, what have you done? 8.01 makes my ipad seems like it is back on dial up. Don't fix what ain't broken, or is your policy break it so we have to fix it?

Apple, what have you done? 8.01 makes my ipad seems like it is back on dial up. Don't fix what ain't broken, or is your policy break it so we have to fix it?

Hi The best option is to do a factory Reset this will get rid of any bugs And set up iPad as new. Just use same Apple ID you will get all your Apps & Data back. Do this over Wifi Cheers Brian

TS3623 I had interruption on rented movie when attempt to return to movie , no library and said to go to downloads , guess what no download setting , will not allow repurchase through Apple TV now have to repurchase through iPad *** have you done to the o

I had interruption on rented movie when attempt to return to movie , no library and said to go to downloads , guess what no download setting , will not allow repurchase through Apple TV now have to repurchase through iPad *** have you done to the old syst

Thanks for the pointers folks. Yeah, 1.5GB is pretty poor isn't it? There are other suppliers, but you have to get a their phone line installed to access the internet so it's an £85 setup fee plus a day off work for a guy to come round and drill a hole in your wall before you even get to the monthly costs.
Don't get me wrong though - I'm certainly not an Apple basher, but am equally frustrated with both them and the ISP.
Virgin Media spend all kinds of money advertising their broadband as the fastest in the UK, but don't tell you (up front anyway) that you'll be cut off if you actually try and use it.
Apple on the other hand carry on with their 'it just works' mantra, but with Apple TV this only applies if you meet certain criteria (again, not mentioned up front).
I guess it aint a biggie, as i was gifted my Apple TV, and love all the other stuff it does, but from the number of posts on this forum can see that there's a lot of angry customers out there who want explanations as to why they're having similar problems to me.
Will be very interesting to see if Apple release any kind of software update that turns the flash drive from a buffer to permanent storage, to at least ease some of the pain...
Message was edited by: McGinty

DEAR ORACLE: what have you done with webdb?

dear oracle,
i was using webdb since rel 2.0.* and i think, it was a great idea! we could visualize data
and give the users the chance to access the data in a very simple way - without programming
in java, c++ or anything else ( ok, pl/sql is needed sometimes. but as long as we are using
oracle databases, we will find someone with pl/sql-knowledge :-), so this is not an
additional requirement).
but what have you done with this wonderful idea?
you have moved webdb to an enterprise-portal, with great functionality and a huge requirement
of resources. no doubt, it is a powerful product, where you can build wonderfull sites
full of surprising elements, every second character bold and blinking . . .
but you forgot the customers, who only need a simple way, to create forms and reports.
by moving portal to such a level, as you have done, you left a gap below this.
please tell me, why should i install and use such a 'mighty' product as 9iAS, when i only
need the functionality, that came with webdb??
some impressions:
- starting with the installation ( download 2 GB! a just released product and i have to download
additional 274 MB of patches, wasting more time with the patch-installation than the rest).
- space-requirements of nearly 5 GB (approx. 12 times as much as webdb 2.2)
- i have to use internet directory, management server, enterprise manager - all products,
that i don't need for the rest of my daily business and that i'm not familiar with
(until now) -> requiring additional time to become familiar with. do you realy think, that the use of all
products in your portfolio makes it easier to handle (as stated in one of the white papers?)?
It seems, that you have lost the ground!
- saving my investments by a migration path? i can forget this - oracle support surrendered and tells
me, that there is something in the installation that prevents me from upgrading.
- the product portal seems to be very 'dynamic': if i don't want to lose support, i have to upgrade
to the next release nearly every three months (one of the most important phrases, heard by support-stuff:
"you have any problem? you should upgrade to the latest release first!")
so, dear oracle,
i hope, you remember those customers, who don't want an overkill. please, fill up the
gap with an applicationserver-light/portal-light and don't forget, that the main scope of your
customers is to fulfil their own customers needs and not to administer oracle-products.
regards
rainer

I have tried to open several large PDF docs with Reader DC (although on Windows 7), and they all open instantly.
Two possibilities I can think of:
Are you inside a corporate firewall? If so, make sure that you have access to cloud.acrobat.com
If the above is not the problem, can you try to disable Protected Mode [Edit | Preferences | Security (Enhanced)].

Oh Nokia, what have you done? (UK)

Oh Nokia! What have you done?
Restricting the Lumia 920 to a single network in the UK is a MAJOR mistake!
Ok, logic states you want to push the 920 via a 4G network, of which there is only one currently but that doesn't mean people will switch to that network.
We all know 4G will come to the other networks and people will buy a phone based on that and a myriad of other factors such as network coverage, customer service, Operating System etc.
So restricting availability to a single network which, to be frank, is not regarded as having the best service or coverage is simply ludicrous.
Yesterday I saw a retailer in the UK offering the 920 SIM Free. Yahoo! I can jump in with an off-contract purchase to supplement my two other Windows Phone 7.5 devices - one of which is also a Lumia (800 in this case, bought on the day of release!).
'Are you sure this is SIM Free and therefore Carrier unlocked?' I ask. 'Yes, all our SIM Free phones are unlocked.' came back the response.
OK, here is my £459 to buy the device....
Imagine my surprise when neither of my O2 SIMs were able to be used but my T-Mobile SIM was!
Call the retailer to be told by the Manager that it was SIM Free and unlocked. Back to shop I go - much testing with many SIMs ensued and a call to Tech Support confirms my suspicions that it was indeed locked to the EE family (EE/T-Mobile/Orange).
'Can I have an unlock code please?' I ask to have the response there are none available. Only option is to refund!
So Nokia, you have lost a sale of your flagship device (and being part of a UK Smartphone community that reviews, tests and supports such devices and users) and I know there is latent demand for it out there but no-one I know wants it on that network and certainly not on the commercial terms on offer where the 4G element is restricted...
The HTC 8X although specification wise maybe not quite close enough to the 920 to be called equivalent is close enough and has such a commercial advantage (read minimum £60 cheaper) and is available SIM Free to be the one to buy if you want a Windows Phone 8 device now.
So much for your loyal customer base who jumped in with Nokia on the release of the Lumia 800, they cannot now go to the 920. The 820 is not flagship and in comparison to the HTC 8x is somewhat lacking ( I had them both in my hands yesterday).
Oh, dear, Nokia, this is hardly likely to help your financial woes when you restrict sales of your flagship device in the UK.
I am happy to engage on this with Nokia UK and even review said device but in reality all I want is to be able to buy the device for personal use.
The Nokia Value Proposition is a strong one compared to the other Windows Phone 8 manufacturers (HTC 8S/X and Samsung Ativ) with the exclusive and attractive software elements but that's only a real value if the device can be obtained otherwise it is irrelevant.
I look forward to Nokia's response.....

Today I phoned t-mobile UK (South African call center???) to order an 920 as an upgrade, I made it quite clear that I wanted the 920, but the customer services advisor was absolutely determined to sell me an iPhone 5, stating the IP5 was a 'much better phone' etc. I was pretty annoyed at this behaviour as he was doing absolutely everything he could to persuade me to buy the IP5. I ended the call without ordering anything.
I eventually managed to order a 920, this time through a UK call centre, it would seem t-mobile UK and orange UK are doing everything in their power NOT to sell the phone, it's not listed on either of their online shops, even though you CAN buy it from them. Initially I was told the 920 wasn't available on t-mobile, even though my friend had got on on t-mobile a few hours earlier, once informed of this, they remembered it was available and allowed me to order.
To me it seems the TMUK and Orange are pushing the EE network at the expense of Nokia. Why, because people are put off by EEs ridiculously high monthly price plans, and TMUK & Orange aren't making it known that you can get it on their network at a much cheaper monthly rate.

I Just updated to the latest Apple TV software and now have no Movie trailers. Have they done away with Movie trailers?

I Just updated to the latest Apple TV software and now have no Movie trailers. Have they done away with Movie trailers?

Many thanks b Noir
This is a copy of ONEof the keys in the registry I changed as told by Apple support today. I also have changed others as instructed by GEAR software support to manually delete GEAR drivers (that I had installed but couldn't delete some of the others they mentioned from Windows system 32. Then some bright spark at work told me I need the Gear drivers so I downloaded the software and installed again.
Sorry, just this minute went to insert image and it is giving me a message saying this sort of content is not allowed?.
The most recent key I altered is in: HKey _local _machine. System\class - 4D36E965-E325-11CEBFC1-08002BE10318. Upper Filter data: Upper filter NTIDrvr SiRem GEARAspiWDN.
The GEARsoftware info about manually deleting GEAR drive is from:
http://www.gearsoftware.com/wiki/index.php?title=DRIVERS:_Windows_-_Updating%2C_ removing%2C_64_bit_versions%2C_etc
I hope you can help

I frequently get a message that pops up from yahoo sync asking for my password, and I don't know that I have ever done anything with yahoo sync?? So how do I make it go away?

I recently started getting a message popping up asking me for my Yahoo password and it references my email address that is attached to Yahoo Sync somehow. It happens very frequently and I don't know that I have ever done anything with sync and I want it to go away. Anyone else had this problem?

Thank you so much!!! I was having the same issue and I was going mental as welll!!

Changing Asterisk Default RTP Ports - Have You Done It with Success?

Similar Messages

Maybe you are looking for