Changing attributes of Toggle Buttons

I would like to remove the border of the circle of a JRadioButton and the square of a JCheckBox. Is this possible? I would also like to have the label text be black and the selection color be something else (say green). Any help would be greatly appreciated.
Thanks much,
Brian

gmoonit wrote:
> Hey ya'll! First off i'm new here and it looks like you
guys know what you're
> talking about. i searched the forums but could not find
any help (perhaps i
> wasn't' looking hard enough) ANYWAY here is the deal:
> i'm a complete n00b.
> I have a flash movie with multiple buttons and want to
change the fonts of ALL
> buttons simultaneously (it changes color on mouseover,
so i want to change the
> font of the text which is a different color... ... the
fla file is here.... i
> can make any changes necessary and start over if need be
(its a pretty simple
> flash menu i guess) any help with optimization and
efficiency would be
> appreciated.
You need to edit each button individually, one by one.
The only time when multiple buttons get changed all at once
is when you
design it fully dynamic. One button/movie clip, duplicated,
multiplied and
control by action script.
In your case, you need to change one by one manually.
By the way, take note that the forum is connected to News
Server. Many of us
never use the browser based forum so by bumping your post,
you only make it appear
answered and your chances of getting help get smaller as we
usually go for the
unanswered threads only.
Best Regards
Urami
"Never play Leap-Frog with a Unicorn."
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Similar Messages

  • Changing attributes of push button dynamically

    Hi guys,
    I have a pushbutton, how can i change its attributes in position coordinates dynamically? is it possible?
    OR
    how to subsitute a pushbutton dynamically with another pushbutton?
    example:
    button1 will be swapped with button2.
    for now, i only can make them visible and invisible.. but i cant put them at the same spot together.
    does anyone have some suggestions? thank you very much.

    hi darshan,
    can you explain in more detail? because i only managed to make the buttons like this:
      IF sy-ucomm = 'ACPT' AND NOT ld_ran_aufnr IS INITIAL.
        LOOP AT SCREEN.
          IF screen-name = 'MUL_B1'.
            screen-invisible = '1'.
            MODIFY SCREEN.
          ENDIF.
          IF screen-name = 'MUL_B1A'.
            screen-invisible = '0'.
            MODIFY SCREEN.
          ENDIF.
        ENDLOOP.
      ENDIF.
    button mul_b1 is next to mul_b1a.. if possible is there any other way to make it almost like overlapping? like swapping? or change its coordinates?
    thanks

  • Changing the functionality of mouseClicked via Toggle Buttons

    Hi,
    I want to be able to change the drawings produced by clicking the mouse by choosing what I want to draw from a series of toggle buttons on my GUI.
    I have an on my GUI, on top of a jPanel and when I click on it each click draws a red circle on the point of the image I click on.
    Now I want to be able to choose what my click will draw on the image through toggle buttons that I've added on the GUI to illustrate what each ToggleButton will enable to draw.
    For example a toggle button should enable the mouse to draw the number 1 on the image when clicking, while another toggle Button enables the mouse to draw red circleso on the image.
    Please help, I'm kinda lost here.

    I want to change what is drawn to the screen using clicks with the usage of toggle buttons.
    This class I have enables me to draw red oval shapes with a single click on an image on the top of a jPanel.
    public class GPanel extends javax.swing.JPanel {
    private int xPos = -1;
    private int yPos = -1;
    BufferedImage img;
    private boolean updateFlag = false;
    public void setUpdate(boolean b)
    updateFlag = b;
    @Override
    public void paint(Graphics g) {
    g.drawImage(img, 0, 0, null);
    if (updateFlag == true)
    repaint();
    updateFlag = false;
    clearVectors();
    else
    for (int i = 0; i <xCoordinates.size(); i++)
    xPos = (Integer)xCoordinates.get( i );
    yPos = (Integer)yCoordinates.get( i );
    g.setColor(Color.RED);
    g.drawOval(xPos, yPos, 25, 25);
    g.fillOval(xPos, yPos, 25, 25);
    public void clearVectors()
    xCoordinates.clear();
    yCoordinates.clear();
    public GPanel() {
    try {
    img = ImageIO.read(new File("I:\\fr.jpg"));
    } catch (IOException e) {
    @Override
    public Dimension getPreferredSize() {
    if (img == null) {
    return new Dimension(100,100);
    } else {
    return new Dimension(img.getWidth(null), img.getHeight(null));
    private Vector xCoordinates = new Vector();
    private Vector yCoordinates = new Vector();
    public void setCoordinates(int xPos, int yPos)
    xPos = _xPos;
    yPos=_yPos;
    xCoordinates.add(_xPos);
    yCoordinates.add(_yPos);
    public void update()
    this.repaint();
    public BufferedImage toImage() {
    BufferedImage im = new BufferedImage(1024, 768, BufferedImage.TYPE_INT_RGB);
    Graphics gr = im.getGraphics();
    this.paint(gr);
    return im;
    public static void main(String[] args) {
    JFrame f = new JFrame("Load Image Sample");
    f.addWindowListener(new WindowAdapter(){
    @Override
    public void windowClosing(WindowEvent e) {
    System.exit(0);
    f.add(new GPanel());
    f.pack();
    f.setVisible(true);
    And this is the mouse event handler that draws with the click...
    private int xPos,yPos;
    private void gPanel1MouseClicked(java.awt.event.MouseEvent evt) {//GEN-FIRST:event_gPanel1MouseClicked
    xPos = evt.getX();
    yPos = evt.getY();
    gPanel1.setCoordinates(xPos,yPos);
    gPanel1.paint( gPanel1.getGraphics());
    But now I want to change the thing that is drawn with pressing toggle buttons on my GUI...
    And I don't know what to modify in the code and how to do it....I'm looking for an elegant way so that I can reuse the code that I have written. Just change the thing what will be drawn with the mouse click...

  • Toggle button to "Down" when changing application state?

    I am trying to make a button component modal so that when I click it, the application changes to a different state and the button stays in the button "down" state. Then if I click a different button, the application state changes again, the first button changes to the "up" state and the second button changes to the "down" state. Basically, I want radio button actions, but on a styled button.
    Is there a way to do this in Catalyst or do I have to handle this in the FB code?

    I had some difficulty getting Catalyst to allow me to set the states of toggle buttons added to my project. So, I decided to create my own custom toggle button to give me the ability to fully style it. Here's the process I followed:
    converted my styled "normal" buttons back to artwork
    Converted the artwork to a custom component
    Created states for custom component for Unselected, Selected, Over, etc.
    Associated the artwork from Illustrator to the appropriate states for the custom component
    set the custom component state (e.g., unselected, selected...) for the each of the appropriate application states
    set the component action to "transition to state" when the custom component is "clicked"
    Renamed the custom component in the library to "CustomToggleButton"
    Exported the CustomToggleButton library component and then imported it so it was reusable in my library

  • Is there a way to modify chamfer size on toggle buttons?

    I am using LabWindows/CVI 2010 on Windows 7 for a client's application.  Is there a technique to change the chamfer size on a standard toggle button?  I do not see an attribute, or any other settable item, but maybe I missed something.
    Thanks.

    Hello ryk,
    Unfortunately, there isn't an attribute or a setting that allows you to change the angle of the corners (chamfer size) on the toggle button or other button controls (including picture buttons).
    This is a predefined appearance setting of various LabWindows/CVI controls.
    Best regards,
    - Johannes

  • Contacts Calendars Bookmarks Find My iPhone toggle buttons won't switch on

    I have a new iPhone 3GS, but under Settings - Mail Contacts Calendars - My .Mac account, I cannot get the toggle buttons for Contacts, Calendars, Bookmarks and more importantly Find My iPhone, to switch to 'ON'. Mail however is 'ON'. When I click them to 'on' they just immediately turn themselves off again. This means that my iPhone does not show up in my .Mac/MobileMe account and therefore Find My iPhone will not work.
    As far as I can see everything is set up correctly. I've looked through posts here, read Apple's suggestions, but none of these will switch to 'On'.
    Fetch New Data is set to Push. Fetch is set to every hour. Location services are On.
    In iTunes, Mail Contacts Calendars Bookmarks are all set to sync.
    Under Account Info for my .Mac/Mobile Me account I am still using the older .Mac settings as I still prefer my [email protected] email address - could this have anything to do with the problem? Should I try deleting the account manually and re-adding it manually with the new Mobile Me settings?
    When I set up my iPhone 3GS I used the backup of my old 1st Generation iPhone to set up the new phone in iTunes. The settings above wouldn't toggle on the old phone either, so I wonder if I have inadvertantly brought a bug across by restoring from the old phone backup?
    Really puzzled now. Has anyone come up with a solution or is it a problem at Apple's end?

    OK, solved my own problem! For anyone else having the same sort of problem, all I did was to manually delete my .Mac/MobileMe email account on my iPhone completely, shut down the iPhone completely, switch it on again, and manually add my .Mac/Mobile Me account back on the phone - this time using my address as [email protected], forcing it to use the me.com servers instad of my older .Mac servers.
    Instantly I was able to toggle the buttons and switch on Find My iPhone, which is now showing up online in my .Mac account.
    Now I've just got work out how to change my outgoing email address back again to [email protected] because I HATE @me.com! It's a horrible email address, and sounds really self-important.

  • What's wrong with my toggle button bar?

    I've used one before, and I don't understand why my toggle
    button bar is not showing the "active" state for the first index of
    the viewStack it is linked to.
    Normally, I use mainStack.selectedIndex = 0 and that
    highlights the first (default) item of the view stack.
    I change the viewstack with a timer, and all subsequent
    states the correct button highlights, even when I have it loop
    around to the first item again. It's only initially on load.
    Thoughts?

    Thanks, Greg.
    That didn't work either, but it got me thinking. Moving it to
    the end of the function that assigns the children to the view stack
    finally worked:

  • Integrated scroll panels and unmovable toggle buttons

    Hey,
    iam looking for an expert. I am working on an HMI development and wanted to use Flash Catalyst. However, I think I am already reached the limits of FC. But perhaps there is a FC solution because I can not program Flash.
    Problem:
    In my layer, I have different graphical objects and text blocks. A part of them I want to move with a scroll panel. That's easy, not a problem.
    However, all these objects (including the scroll panels) should be integrated in a master scroll panel. This means, that all parts, even the integrated scroll panels, should be moveable at the same time. I managed this.
    Now, I need multiple toggle buttons. With these Buttons I wanted to change the form of some of the graphical objects resp. the text blocks. But the buttons have to be unmovable. This function (to change the form of the objects) is relatively easy but in combination with the integrated scroll panels it isnt. The buttons are able to move the objects when these buttons are pasted in the "deepest" layer, the layer of the objects. But there, the buttons are moveable and slide out of the screen (with the master scroll panel) and not clickable.
    How can I manage this? I need unmovable toggle buttons, with these I want to change the forms of objects. The objects are pasted in integrated scroll panels. I hope it's understandable!
    Can someone help me? It would be glad if the answer does not depend on the learning of the flash programming!
    Thanks.

    After 2 days of banging my head against a wall (doesn't it always go that way)...
    Turns out one of my panels had sub-panels causing the problem. Visibility to the parent panel was controlled by a button on one of the child panels. Once I "promoted" the button to the parent panel, the panel (screen) flow worked great.
    Is this 'undocumented functionality'? Why should it matter how deep the button is nested? (incidentally, the reason it worked in my test environment was the lack of other components - aka the child panel)
    Well, regardless. Thanks to those who gave it thought.

  • On Change or On Toggle Action of Checkbox in ALV

    Hi,
    i have a checkbox column in alv and i want to update database which checkbox of which row is changed so i must create an on changed or on toggle action for checkbox of alv.
    How can i create an on changed or on toggle action for checkbox of alv?
    or is there anyway else?
    Thanks.

    Hi Nurullah,
    This functionality is quite possible. You need to create an event handler method (say for example CHECK_DATA_CHANGE) for the event ON_DATA_CHECK of the ALV.
    You would have to first call the DATA_CHECK method of the ALV component. This method checks if any data has changed in the ALV and then triggers the ON_DATA_CHECK event if it finds that something has changed in the ALV. Create an eventhandler method for the ON_DATA_CHECK method and within this method enable your SAVE button for the user.
    Call this DATA_CHECK method from WDDOAFTERACTION so that whenever any action is performed the system would check if any data has changed in the ALV & then eventually execute your eventhandler method resulting in the button getting enabled. Hope that this is clear for you now.
    method WDDOAFTERACTION .
      DATA lo_interfacecontroller TYPE REF TO iwci_salv_wd_table .
      lo_interfacecontroller =   wd_this->wd_cpifc_alv( ).
      lo_interfacecontroller->data_check( ).
    endmethod.
    Regards,
    Uday

  • Theme colors - Change the color of buttons

    Hi
    I went through the tuttorial, "Adding Styles to Components"
    I were able to change different properties of buttons by creating a Style Class with the same name as that of the theme but with different style attributes.
    This had the desired effect except for the background color.
    I played around abit with the style editor settings of a button with a theme applied on it, and found that when you are in the background tab of the editor and you select your desired new color, that there are no changes EXCEPT for when you select the " Repeat-y" from the "Tile" drop-down list. Only problem is you get a funny stripe through the middle of the button.
    Is this the only way to change the color of buttons, linked to a theme, to a new color?
    Any Advise
    Thank you

    To find the style properties defined in class Btn2, go to the theme's read-only css_master.css file:
    In the Projects window, expand Libraries > Default Theme > com.sun.rave.web.ui.defaultheme.css.
    Double-click the css_master.css file to open the file.
    Search the file for the style class of interest, such as Btn2.
    For example, to set a Btn2 background-color, both background-color and background-image must be defined to override the existing style class. Since you cannot make edits to the read-only css_master.css, use the style property editor to set the background-image to null and the background-color to the one desired for your component.

  • Word 2010 Ribbon toggle button page size feedback

    For a Word template I am developing a custom ribbon for end-user ease of use and to protect the structure of the document. There is one issue I am currently running into for which I cannot find a solution.
    It started with a footer image which needs to be rescaled with the page width (page size and orientation) while retaining its aspect ratio. Apparently this is not possible without VBA (tried fill image for shape and set relative width, but that leaves
    the height fixed), so now the idea is to get a pull-down menu with toggle buttons for page size and orientation and change the image size using a macro. The options are A4 portrait, A4 landscape, A3 portrait and A3 landscape. The problem now is how
    to get the run-time feedback of page size and orientation to highlight the page setup of the active section, like the built-in size and orientation buttons.
    Hopefully this can be done.

    Hi AlexFolmer,
    Sorry for the delay.
    >> Create a custom ribbon menu with buttons to select the paper size, this can be done without too much effort. However, if this is to be implemented I would like the button representing the current paper size/layout to be highlighted in the same way
    as the Word native paper size/orientation buttons do
    Do you mean that you want to create a custom ribbon menu for user to select the Page size, and when you click the ribbon button, the current page size could be highlight. In my option, you could do as below:
    1.  Add a Combobox into the custom ribbon, set the items with “Item1”, “Item2”
    2. Add event to comboBox1_TextChanged, key code like below:
    private void comboBox1_TextChanged(object sender, RibbonControlEventArgs e)
    if (comboBox1.Text == "Item1")
    Globals.ThisDocument.PageSetup.PaperSize = Microsoft.Office.Interop.Word.WdPaperSize.wdPaperA3;
    else if (comboBox1.Text == "Item2")
    Globals.ThisDocument.PageSetup.PaperSize = Microsoft.Office.Interop.Word.WdPaperSize.wdPaperA5;
    For combobox, it has the function to highlist the selected item. At this time, we need to solve the issue for opening the document, the combobox would show the current pagesize. You could refer the code below:
    private void Ribbon1_Load(object sender, RibbonUIEventArgs e)
    if (Globals.ThisDocument.PageSetup.PaperSize == Microsoft.Office.Interop.Word.WdPaperSize.wdPaperA5)
    comboBox1.Text = "Item2";
    You could refer the link below for more information about Globals.ThisDocument.PageSetup.PaperSize
    Reference:
    https://msdn.microsoft.com/en-us/library/microsoft.office.interop.word.pagesetup.papersize(v=office.11).aspx
    In addition, if you have issues about PageSetup.PaperSize, I will recommend you post a new thread.
    The reason why I suggested is:
    #1 There would be more community members to discuss the question.
    #2 For people who have the similar question, it would be easier for them to find the answer from a specific thread.
    Best Regards,
    Edward
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How to create a toggle button which has some id associated with it

    Hi all,
    This is my problem
    <formid><some value in a text box><toggle button>
    here formid is a hidden parameter.
    There can be multiple records of this type...the user can change the text box as well as toggle any record.
    Now im unable to create a toggle button such that it is related to the formid as in when a user toggles between two values i want to be able to link that button with the form id.

    Assign an ID to the button? I don't fully understand the problem either.

  • User change attribute workflow with approval  problem

    Hello,
    I have a requirement to add account numbers to user entry through workflow with approval process. and also same user can have multiple account numbers. when approver approves the User request then it's account number will be added into the user entity in ldap.
    So, i have created a Change Attribute workflow for that account number with these steps as : initiate, Approval, Commit, Error_report
    this workflow i am able to invoke through IdentityXML call and from OIM interfaces approvers able to approve and that account number is persisting under the User entity.
    Problem is: Actually above request is staging system. when user requests, it is in initiate step, when approver approves the request then only commits the info. so, there are 2 stages here.
    When i am requesting two consecutive account number requests then both requests are in initial stage. Then approver approves the 1st request then it is persisting into User entity. after that approver approves the 2nd request then this account number is overwriting the previous one. so, here is the problem i am finding. worflow is not adding the new account number.. instead its replacing the last value in the list of account numbers for an User entity.
    I hope the above problem make understandable..
    Really its a very much helpful to find the solution on this.
    Thanks in advance,
    Srini.

    Thanks for the help. Having reinstalled OID/OAM a bunch of times to properly add our custom user object, nothing seems absurd. I tried running through your steps, but I'm still not getting the workflow button. I've customized create and delete workflows properly, but the change attribute is a mystery.
    I did the following:
    1) Selected a custom attribute in Attribute Access Control
    2) Changed its read access to Anyone
    3) Saved
    4) Changed its modify access to Anyone
    5) Saved
    6) Added a new Change Attribute workflow for the custom attribute
    7) Action #1: Request, added Anyone as participant and saved
    8) Action #2: External Action, selected attribute is the custom one
    9) Action #3: Commit
    10) Saved and enabled the workflow
    11) Restarted the Identity server
    12) Picked a user
    13) Opened his user profile
    14) Clicked Modify
    The custom attribute is still editable and has no Request a Change button.

  • Multiple toggle buttons to the same destination causes conflicts

    I'm trying to set up multiple toggle buttons so that a user can click on a button at any time and set the state of the dashboard. Each toggle button has a unique value (and each one has the same static value for both on and off) and I've mapped all the toggle buttons to the same destination cell. But they all seem to be competing to set the desination to their preferred value even when they're not being clicked on and, as a result, the dashboard keeps changing state in unexpected ways. Is there a fix for this?

    When you have multiple components trying to insert to the same destination cell, the front-most object wins at load time. So, if tb1, tb2, tb3 (tb3 being the front-most object) are all set to respectively insert values 1, 2, 3 to the same cell, the cell will have value 3 initially.
    Now there is an issue when objects in different groups try to insert to the same cell. The release note for FP3 implies that this problem is resolved, but I think it is not fixed completely...

  • Toggle Buttons for multiple images

    I just watched a video from lilybiri about standard and simple actions and then followed into her blog for the text caption toggle buttons.
    Now reading through that, there was if statements suggesting you can toggle between the values of 1 and 0 to make visible/invisible. Can this be done with more than 2 images? I am more interested in having a toggle feature where I can have 3 or 4 images and toggle the images to see changes in detail within those images. It seems like it has to be possible, but I'm not getting it.
    Also, is there a way that if you have a toggle button, or two perhaps, that you can have the button be displayed as if it was pushed? I know how to make buttons, I'm just wondering if there is a feature to display the button as the _down version until I re-select it, or toggle it off as it were.
    Thank you!

    You will need a conditional action, perhaps use a variable for each button that will be set to 1 if the button is pushed and to 0 if it is free.
    Didn't check it out but action will be something like this:
    IF v_bt1 is equal to 0
        Assign v_bt1 with 1
        Show im_down1        which is the image of the down-state
        Show Image1             which is the image you want to show
        Hide Image2
        Hide Image3
    ELSE
       Assign v_bt1 with 0
       Hide im_down1
       Hide Image1
    You'll have to test, it is too late over here for me to do some testing. I added the hiding of the two other images, because if the user doesn't toggle the buttons for those images to hide them, I think you want to hide them automatically. Perhaps better also hide their correspondent down-states? Be sure to have the image of the down-state on top of the button in the timeline panel.
    And if you ever want to return to the slide, have an on Enter Slide action that hides all the down and real images.
    Lilybiri

Maybe you are looking for