Changing AUC Status on Asset Class

Hi Gurus,
We’ve have a few asset classes in our production system where the “line item settlement” has been selected, however, these asset classes are not AUC. These asset classes are not very ‘active’ and not many transactions occur in these classes throughout the year but we’ve come across some scenarios where we’ve tried to acquire assets through these classes using transaction type 153 (affiliated company, gross) and we’re getting error message because these asset classes are incorrectly categorized as line item settlement (i.e. open item managed) so we have made the decision to correct these classes and change the AUC status to “No AUC or summary management of AUC” in OAOA.
My question is in your experience have you’ve ever come across similar situation, what should I be testing or what processes I should follow to make sure the existing assets in these asset classes are not negatively impacted.
Any recommendation or thought would be much appreciated.
Thank you.

Hi,
if you don't have transaction do the changes if you have transaction it's quite diffcult to change status however we can do the table level change it works.
do the changes in Development client and test it.
Regards,
Raman

Similar Messages

  • Change Reconcilation A/c in Asset class

    Hello,
    I want to change reconcilation a/c in asset class the asset opened under that class has some values , when i change the value in asset class the system is not allowing me to change it .
    Is there any exits for it ,if yes the kindly let me know and also suggest me how to apply the exits.
    Thanks

    Hello,
    You cannot able to change the recon account in the Asset class if already any documents or assets has been posted.
    There is a scope that you can reverse the both and try the same.
    If no documets (Both Asset Number, Asset document like addition or depreciation ) are posted
    then you can able to do the same,
    revert back for further process,
    regards
    N.Kumar

  • Setting for 'status of AuC' in the definition of the asset class

    where should i check the setting for 'status of AuC' in the definition of the asset class

    Dear Gajanan,
    Create asset class in OAOA. Assign account determination & screen layout, number range.
    You have a section down as Status of AUC. Select the second radio button of "Line item Settlement"
    Regards,
    Ajay

  • Asset class summary management auc

    Dear Forum,
    May I know what is the meaning of summary management auc under status of auc in asset class OAOA.
    Hope to have advice as I read from F1 but yet not clear.
    Thanks

    Hi,
    F1-Help:
    The summary management of the asset under construction has the following affects:
    o Only complete transfers or simple partial transfers are possible (in other words, you can only transfer either prior-year
       acquisitions or current-year acquisitions in one given posting transaction).
    o You can only transfer to one target asset per posting transaction. You have to enter the amount of the transfer manually.
    o There is no connection to the original asset under construction in the capitalized asset. Therefore, there is no exact proof of
       origin for the original postings.
    Regards Bernhard

  • HOW TO CHANGE THE USEFUL LIFE FOR MORE ASSETS AT A TIME FOR ASSET CLASS

    Hi All,
    Asset which is under Asset Class Support system-B700. Here every thing is ok but the problem in USE FULL LIFE which is come by default. It must be 4 instead of  5.   So can any body help me out from this how to change the Useful life in that Asset class.  In that Asset Class we have the morethan 200 Assets. It was happend in Prdocution system so now the problem is where i can change the useful life for the asset class either in DEV or PRD.
           Also i want to know the information of How these assets are Uploaded into the system (Lsmw or etc). this is very urgent for me.
    Thanks in Advance,
    Regards,
    Siva.

    Hi Ashok,
         Can i know the reason how it was happend. i mean instead of 4 years the system showing is 5yesrs any reason is there behind that.
    Thanks in Advance.

  • How to change asset class of an asset and problem in AS08.

    Hi All,
    The user has given wrong asset class and created asset masters.For the same assets, he has done capitalisation and executed settlement in KO88.
    Now when we try to reverse the document in AB08,by default it goes to KO88 screen and if we reverse select reverse optiion in test mode, system is picking up some other entries.
    Is it possible to revrse asset documents once settlement is done.If not how should we change the asset class of those assets.
    I need your help on this.
    Thanks,
    Kumar
    Edited by: KUMAR on Sep 24, 2009 8:35 AM

    Hi,
    from my knowledge it should be possible to reverse the entries.
    If it is only a problem of wrong categorization of assets, you can create a new asset in the asset class you need, and then transfer the asset completely to the new asset (tcode ABUMN).
    Regards,
    Markus

  • Changing an asset class determination account

    I have an asset class numer 233 this class has a determination acount numer 1 configured in its class master record. One asset was created using tx as91 with this class and 6 months depreciation was run (tx AFAB).
    Now I need to change the asset class account determination from 1 to 2. Is this posible ?, how ?.

    One you have assets with postings in an asset class you can no longer change the account determination.
    As an alternative you can create a new asset class with the correct/new account determination.  Than you can transfer the assets from the existing asset class to the new one using transaction code ABUMN.  If you have many assets to transfer than you can use the mass change functionality.

  • Change of existing assets class description

    Hi Friends,
    I have a query and the details are given below:
    We intend to change the existing assets class description.
    Is it possible!
    What is the impact of such changes?
    As per my observation / opinion, we cannot change the asset class description after configuring the account determination and the other transactions were carried out.
    Is it correct? Can any one advise me pls.
    GB

    Hello
    Asset classes have some default parameters.
    Description can be changed any time.
    This data is at header level and does not impact transactions.
    You should be able to change it.
    See if you can change the description at table level, check Table ANKT or ANKA
    Reg
    Suresh

  • How an AUC asset class can be assigned to internal order type

    Hi
    We want to create new AUC asset class for our requirement. For that purpose we want to use existing internal order type of my new AUC asset class also. When we create internal order in KO01 and create AUC in same step new asset class should be picked up. Please explain me how we assign internal ordet type to AUC.
    Regards
    Padma

    Hi Padma
    Do the following configuration steps for AuC scenario.
    1. Asset under Construction
    1.1 Define Screen Layout for Asset Master Data
    IMG Investment Management Internal Orders as Investment Measures
    Master Data Assets under Construction Define Screen Layout for
    Asset Master Data
    1.2 Define Asset Classes
    IMG Investment Management Internal Orders as Investment Measures
    Master Data Assets under Construction Define Asset Classes
    2. Asset under Construction
    2.1 Define Model Orders
    IMG Investment Management Internal Orders as Investment Measures
    Master Data Orders Define Model Orders
    2.2 Define Order types (KOT2_OPA)
    IMG Investment Management Internal Orders as Investment Measures
    Master Data Orders Define Order Types
    2.3 Define Investment Profile and Assign
    IMG Investment Management Internal Orders as Investment Measures
    Master Data Define Investment Profile
    3 Settlements
    3.1 Maintain Allocation structure
    IMG Investment Management Internal Orders as Investment Measures
    SettlementMaintain Allocation Structures
    1.2 Maintain Settlement Profile
    IMG Investment Management Internal Orders as Investment Measures
    SettlementMaintain Settlement Profile
    3.3 Maintain Number Ranges for Settlement Documents
    IMG Controlling Internal Orders Actual Postings Settlement
    If you want budgetary control also do the following steps:
    3 Planning and Budgeting
    3.1 Maintain Planning Profiles
    IMG Investment Management Internal Orders as Investment Measures
    Planning and Budgeting Maintain Planning Profiles
    3.2 Maintain Budget Profile
    IMG Investment Management Internal Orders as Investment Measures
    Planning and Budgeting Maintain Budget Profile
    3.3 Define Tolerance Limits for Availability Control
    IMG Investment Management Internal Orders as Investment Measures
    Planning and Budgeting Define Tolerance Limits for Availability Control
    Regards
    Kiran

  • Urgent! How to change Asset Class in Asset Master Record

    EMERGENCY CALL!!!
    Hello,
    My customer has created asset with wrong asset class.
    Is there any chance to change asset class in master record, and if not please explain how to delete existing one and create new asset with right asset class.
    Note: the values are already posted to this asset
    Regards
    Amina

    1. Asset class cannot be changed anymore in asset master record.
    2. You cannot delete an asset which is already posted
    Solution for your problem:
    1. Create new asset with the right asset class.
    2. Do transfer asset using t-code : ABUMN from old asset (wrong asset class) to the new one (right asset class).
    Hope it helps

  • How to put ***.acquis.val for asset class (AUC &LAND)

    Dear All,
    According to I do lagacy data via AS91 (Asset Class: AUC & Land) I found that ***.acquis.val. field are gray.
    I defined Dep area = 0000 for both asset class because it must not calulate depreciation.
    Could anyone tell me how can I put acquisition value to these asset.
    Thank you in advance
    Best Regards,
    Utarat.P

    Hi,
    Please Check Cutover Date,
    Ex: If your Cut over date 31/03/2010, you are trying to post values in as91 @ 02/01/2010 system not allowed to give aqestion & Acc Dep values.
    Regards
    Viswa

  • Change the asset class

    Hi ,
    I want to change the asset class when a root level WBS element is released based on the profit center group  (of a Requestesd profit center) for a company code in CJ20N  tcode. Pls suggest me  how to approach it  ?
    Thanks in advance.

    hi,
           go in as02 and do your work.
    WithRegards,
    Sulabh Agrawal

  • Asset Class change.

    Hi experts,
    My client want to change asset class of existing asset? Please explain me the procedure?
    i.e : my client is having asset class '1000' and all assets are created by using this asset class.  Now they want to create new asset class say '2000' and change some existing assets from '1000' asset calss to '2000' asset class.  Please suggest me now can it be possible?
    Regards,
    Sam.

    Hi Samiuk,
    It is unfortunate that SAP does not allow changing asset class directly in asset master and only by asset transfer (ABUMN) for this purpose. Although new fixed asset number will be assigned following the asset transfer to new asset class, the original asset number will also be transferred automatically and can be found under 'Origin' tab in the respective asset master.
    Report 'S_ALR_87012058 - List of Origins of Asset Debits' can be used to display the relationship between the new fixed asset number and the original asset number.
    Hope the above helps.
    Cheers,
    John Chin

  • Batch change status of assets - REVISITED

    I'm trying to crack this: user selects multiple assets and changes the status of these assets with a few mouse clicks. In general batch processing of user selected assets.
    Because the 'filter' in this case is done by user interaction, I can't find a way to set an asset filter in the usual way.
    I've read about attempts to create a production and work from there, but these attempts failed because it's difficult to change assets metadata based on production metadata.
    However, when an asset is dragged into production X, there is a flag in the metadata of the asset, stating that this asset is now linked to production X. This information is visible in the info screen of the asset under the heading 'Resources': "This asset is linked to".
    "This asset is linked to" is part of Metadata Group PRODUCTIONRESOURCELIST.
    So if we could add this field into the Asset Filter for subscriptions we could fire off responses when 'Trigger if changed' is ticked on this field.
    Production X would work as a sort of dropbox to do X, etc.
    Would this be feasable?
    Henk Rek

    I guess my real question is:
    I couldn't add this particular piece of metadata ('This asset is linked to') as another parameter in the asset filter.
    Is there someone who could help me with this?
    Henk Rek

  • AUC asset class

    Hello Gurus,
    Can anybody help me Below Issues,
    1. what is the different between  normal asset and AUC
    2..without any integration with  SD  MM  and CO  can i do AUC   asset class
    Regards
    Sri

    Hi
    1.AUC (Asset Under Constructioin) assets are the assets which are in Progress state, so they are not in actual used. There will be no depreciation will be charged for these assets. Dep key 0000 is used for these assets so no depreciation will be calculated. Once these asssets are completed they are transfered to Normal Fixed Asset. According to these Normal Fixed Asset dep key setting they are depreciated.
    2. You can have AUC asset without any integration with SD MM but need CO module. Normally WBS element are settled on AUC assets or from Investment Management cost pulled in AUC.
    Regards
    Prashant

Maybe you are looking for