Changing Audio Book Playback Speed?

I wasn't able to find where you can change the playback speed of Audio Books in iTunes.  Can someone point me to where this setting is?
It's pretty easy on iPhone/iPod/etc... it's just a little button under the scrubber that allows for 1/2x, 1x, or 2x.  But I can't see the option in iTunes.  I'd assume iTunes on a Mac is capable of as much or more than the functions on an iPod/iPhone, but...  I can't find the button.

In any case, if my Mac had problems, I'd send it in for service....!!!
About your problem, I don't think that it depends on hardware.
I'd check Live configuration and the SR of the audio files: you know, Live has so many features to modify speed and a lot of other parameters that bacomes easy to forget something.
Try recording something with Garage Band so you will be sure if there is a real problem.
cheers
rob

Similar Messages

  • Audio Books Playback w/Echo on 3Gs

    When playing audio books on my 3Gs I'm getting a reverberate or echo to the sound. iSO 4.3.3.
    Anyone have any thoughts on what might be causing this and how to fix it?

    Ok, I found my answer on page 95, http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
    I needed to know how to bring up the controls for the audio playback. Mine had gotten changed to .5x speed.

  • Audio pitch / playback speed issue, MacBook Pro 10.4.10

    I experienced a very strange audio pitch and speed issue that affected a recording I was making in Ableton Live 6.0.3.
    Setup is MacBook Pro 2.16GHz, Mackie Onyx Satellite FW interface for audio, recording straight to internal HD.
    I made two multitrack recordings (3-4 tracks each) which played back fine initially within Live. I then rendered the audio to AIFF in order to burn data and audio CDs.
    Testing the playback in iTunes, the audio was strangely pitched lower than what we originally recorded. Checking other tracks from my iTunes library, they were playing back FASTER or higher-pitched than normal, and so did audio streamed from MySpace that I was familiar with.
    CDs burnt from these AIFFs exhibited the same "lower pitch" / slower playback.
    Reopening the Live Set, they were now also playing back lower pitched than what we had heard just minutes beforehand during the recording / mixing.
    After I let the computer sleep for a few hours, I came back and checked -- system and internet audio was now playing back at normal speed, but the Live Set was still lower-pitched - the individual WAV files in the set were all pitched lower.
    The Live recording prefs were stock standard - set to record 24 bit WAV at 44.1Khz. Since the issue seemed to affect non-Live audio as well, I'm guessing it was something more at the CoreAudio level?
    I managed to salvage the session by taking the exported AIFFs into Tracktion 3 and using the pitch change function in the Clip Properties pane. One track was 1.5x off, the other was 1.125x off.
    I'm at a complete loss as to why this would happen. It's a first (and hopefully only) occurrence. Has anyone had this happen to them? Could this be some sort of intermittent hardware (clock) glitch? Something to do with 6.0.3 and OS 10.4.10?
    I do need to take this MacBook Pro in for servicing - it experienced the "bulging battery" issue and has a partially dead keyboard (the keys near the upper right) - but even with those issues I've not had audio issues like this.

    In any case, if my Mac had problems, I'd send it in for service....!!!
    About your problem, I don't think that it depends on hardware.
    I'd check Live configuration and the SR of the audio files: you know, Live has so many features to modify speed and a lot of other parameters that bacomes easy to forget something.
    Try recording something with Garage Band so you will be sure if there is a real problem.
    cheers
    rob

  • How to change audio/video speed

    Hi,
    I'm trying to change audio/video playback speed, so I could
    play it faster, but I haven't find any solution.
    It has to be changed dynamicaly - there is no possibilty of
    making normal, fast playing file.
    Thank you
    LN

    If you convert the video into an SWF and embed it playing
    through the frames, you should be able to "skip" frames or pause
    between frames through flex to increase/decrease playback speed
    through the MovieClip.gotoAndStop method.
    Not sure this would work or not. Just a thought.
    Happy coding.

  • Slow playback of audio books on Zen To

    Hi,
    was just wondering if anyone had any experience with audio books playback? I have dowloaded some free audio books, which are predictably of very poor quality.
    The problem is, while they play ok on an PC (lots of noise etc, but bearable), the playback on ZT is slowed down, like a cassete player (remember those) when the battery is dying.
    any suggestions?
    and does anyone know of any good free audio books sources with a decent quality?
    many thanks!

    they are encoded at the wrong speed, although i dont know much about this, if you search "slowed down" you will get a thread that will solve your problem

  • What happened to the playback speed change option in iTunes U??

    I just updated to the latest iOS and installed other updates. That change removed the playback speed change option for both my iPad and my iPhone in the iTunes U app. It is still available in e podcast player. What happened to this option in iTunes U and will it be restored? Listening to some lecturers at normal delivery speed is agonizing.  Any insights on is?

    This appears to be a regression with the new version of itunes U
    Updated: Nov 14, 2013
    Version: 1.4
    So to get it to work:
    you need to have a video with more than 1 option (such as 1 with subtitles)
    Afterwards, the speed you set when the button is working is remembered so when you change to videos where the button doesn't work, it will keep the speed you had.
    We're testing Apple's software for them!

  • Any way to change playback speed on 3g?

    I've seen where you can change the mini playback speed with audiobooks, but I'd like to be able to change the speed when listening to podcasts on my 3g ipod. Can it be done? Thanks

    No, this is not possible with podcasts.

  • I was listening to Audio Books on my iPod Touch in the car when the speed changed to fast forward on all the audio books. How do I correct this?

    I was listening to Audio Books on my iPod Touch while on a motor trip when the speed of the playback suddenly changed to fast forward for all the stored audio books. How can I correct this?

    Actually found this answer in the archives: When the audio book is playing, hold finger on middle of screen until the speed selection message appears and change from 2x to 1x. Thanks for your response though!

  • MY ITOUCH AUDIO BOOK SPEED IS TOO FAST

    When I started to listen to my itouch audio book and music this morning the voice was fast and now it is super fast.  How do I set the voice to normal speed?  When I go to itune to download a book or podcast it sounds normal.  

    One the audio book playing screen there is a box on the right-hand side just below the scrubber bar.  In the box should be 1/2X, 1X or 2X.  Those are the playback speeds.  Tap the box to cycle through/change the playback speed.

  • Changing Audio "Speed"

    I have a 35 minute video segment in Quicktime DV format. When I play the clip in quicktime, everything aligns flawlessly. However, once I import the clip into the FCP timeline sequence, the audio runs about 2 seconds behind the video by the end of the segment. FIRST, can anyone shed some light on what might be misaligning the audio and video? and SECONDLY, I have separated the audio from the video and am trying to figure out a way to change the rate or speed of the audio playback to sync it at the beginning and end to see if I can manually realign the audio and video.
    Any suggestions?
    Thanks!
    Chris
    intel iMac 20"; 1.67 GHz PB G4; Dual 2.3 GHz PowerPC G5   Mac OS X (10.4.5)  

    What happens when you convert the file to DV-NTSC? The audio should be 48khz/16bit.
    DV stream is not a native FCP editing format and is the source of all sorts of issues.
    x

  • Audio Playback Speed Control

    Hi,
    I am working on Flex based Audio Player. I want to change the
    playback speed like 50% of the normal speed or 150% of the normal
    speed. I did some research on flash.media package but couldn't find
    anything useful. Anybody has any idea how we can control the
    playback speed of mp3 files?
    TIA
    -Ghulam

    I know the law, but thanks for the legal advice. Wouldn't it be curious to ask this question if I already possessed software that allowed keyboard commands for transcription purposes?
    Right now, I'm using MPlayer X. ( A lousy, often unstable program). What appears to be keyboard command functionality  -- under AVS at the top of the screen -- does not function that way and,  even if it did function, is not fully what I need. I'll look further into VLC, but a preliminary look into it shows me a program more adapted for video applications. My experience has been that such software is not designed to meet my particular needs. The Adobe program is to EDIT audio. It is not designed to have the keyboard functionality one uses for transcription. This is exactly the problem I  keep running up against with several programs. I can do sophisticated sound editing, but I cannot do simple transcription functions -- keyboard commands to speed up, slow down, move back, move forward.  It is an incorrect assumption that an audio editing program would have those controls, in my experience.

  • When I change the media kind to audio book it wont stay using itunes 10.6.0.40

    When I change the media kind to audio book it wont stay using itunes 10.6.0.40
    I did formate my computer and then reinstilled itunes on a drive that had it on it.
    I'm useing 5.01 not the new 5.1
    Ideas?
    Thanks!

    Still no ansers?
    any one?
    IS it just that i tunes is fail?

  • How to change an audio clip's speed without changing pitch

    is there a simple way to change an audio clip's speed without changing the pitch in FCP? thanks

    Can't do it inside FCP, but you can in Soundtrack Pro.
    Another option is Amazing Slow Downer http://www.ronimusic.com/

  • Unable to change file type to audio book; previously able to.

    I have some audio book files (mp3) that I have added to my iTunes library and am trying to change the type to "audio book" by doing the standard right click and get info and changing to audio book etc.  However, iTunes is only actually changing them to audio books some of the time; the books that are and are not converting are both the same file type (mp3). Whenever it does not change it over, iTunes literally does not do anything (as in it does not try to change it and then fail). I am unsure what the issue is, can anyone help? Thanks!
    Windows 8.1   64 bit
    iTunes 11.3.1.2

    Hi,
    There is no preference but it turns out you can manually edit one of the preferences.xml files to force PL/SQL types to use the SQL worksheet editor. For SQL Developer 3.2.20.09.87 that file is system3.2.20.09.87\o.sqldeveloper.11.2.0.9.87\preferences.xml and will be located (on Windows 7, for example) in directory C:\Users\<userid>\AppData\Roaming\SQL Developer
    No guarantee this will work in future versions of the product, but for now you can add the following two xml blocks...
    For example, for .pls, add to <extensionToContentTypeMap ...>
                <Item>
                   <Key>.pls</Key>
                   <Value>TEXT</Value>
                </Item>
    and <userExtensionList>
                <Item>
                   <docClassName>oracle.ide.db.model.SqlNode</docClassName>
                   <userExtensions class="java.util.ArrayList">
                      <Item class="oracle.ide.config.DocumentExtensions$ExtInfo">
                         <extension>.pls</extension>
                         <locked>false</locked>
                      </Item>
                   </userExtensions>
                </Item> I researched this a while back after reading through some forum thread where someone claimed the PL/SQL file extensions got opened in the SQL editor in his environment, but without stating any specific release information. Possibly it worked for him then due to different product behavior (whether intentional or a bug), or perhaps even due to the technique described above.
    Regards,
    Gary
    SQL Developer Team

  • Can't find my audio book -- Downloaded it from my public library to iTunes via Overdrive. It transferred to my old nano just fine but, even though it seemed to transfer to my new iPhone, I'm not able to locate it for playback.

    Can't find my audio book -- Downloaded it from my public library to iTunes via Overdrive. It transferred to my old nano just fine but, even though it seemed to transfer to my new iPhone, I'm not able to locate it for playback.

    Thank you. That solved the problem. So simple but it wasn't intuitive to me.

Maybe you are looking for

  • Media Encoder Debug event - encountered an error

    When I try to use system presets under several groups example DNcHD MXF OP1a, AVC INTRA or XDCAM EX, the same error message (Adobe Media Encoder has encountered an error. [..\..\src\Command.cpp-3302] appear. Many other preset work just fine but there

  • System is running very slow. any solution?

    system is running very slow. any solution?

  • Cannot access class javax.naming.Referenceable;

    Hi I am trying to create a connection pool and using the oracle.jdbc.pool.* in JavaBeans using JDeveloper 3.1. I am getting the following error.Unable to find the reason for this and the sun documentation says - no usage for this class. Error: cannot

  • SQL Query Problems

    Hello, I am trying to query a database column containing xml. How my problem is when I display my query on the page the data is not being shown properly. The data in the database is like this: <P><tag1>2003/05/22 11:01:34</tag1><tag2>2003/05/22</tag2

  • Exchange Server 2013 Management Pack - not reporting Operations Manager 2012

    Hi, We've installed the Exchange 2013 Management Pack into SCOM2012 but nothing seems to be reporting back. There nothing in Organization Status or Server Health. The Agent is installed on the Exchange Server. There are Event ID's on the Exchange ser