Changing audio files

I got a bunch of aduio books, however they are not formated to play as audio books and play as music instead. How do I change them to go into the audiobooks section of my ipod and play like audio books? So that I can continue from where I left off.

Ctrl+click the audiobook you want to change. (or +i). It should bring up a window. Look through the options and click the one that says music or the 3rd one from the right. Choose what to you want it to be categorized by. Choose audioboook. Or you can make a playlist called audio books and just throw the audio books in there.

Similar Messages

  • Is it possible to edit/change audio files in a published html5 file?

    Is it possible to edit/change audio files in a published html5 file?

    Theoretically, YES, but they would need to be in exactly the same format and have the same filename.  Why would you be wanting to do this?  If the new files are not the same playing length, this could potentially throw out any synchronisation with other elements in the presentation.

  • May I change audio file format once CD are ripped within iTunes library?

    I configured iTunes to store audio under  .vaw format but after ripping 1/5 of my CDs I realize that, after synchro,  50% of my iPod memory becomes full.
    So I'd like to known if it's possible to convert audio files already stored in iTunes library, I don't want to ripp once again my CDs.
    Yes I'm lazy...
    Message was edited by: Parrot Magic

    By .vaw do you mean .wav?
    Yes, you can select the .wav files and use the "convert selection to" (may have changed with newer versions of itunes) to a compressed format such as AAC or MP3.  This will leave the original unchanged and add a new file in the different format to your library.  You can then delete the .wav files, or leave them,

  • Changing audio file locations within I-tunes

    How can I move files out of the music folder and into the audio books folder within the library?
    Specifically, I purchased several MLK and JFK speech files. Most appear in the music list, although a couple appear in the audiobook list. I would like them all to appear in the audio book list. If I attempt to drag and drop it doesn't work despite the fact that the computer indicates this is possible.
    Any ideas? Thank you.

    Julio Heerdt wrote:
    Select the file - command I (Get Info) - select the tab OPTIONS - Change Media Kind to AUDIOBOOK
    See if works.
    Julio
    Julio, it works, but the files marked as AUDIOBOOK disappear and don't appear in an AudioBooks folder, nor can they be found with "Search"
    Try it, put an MP3 file into iTunes, use the procedure to mark it as an Audiobook, then try to find it.
    Is there supposed to be an AudioBook folder, like there is Music, Movies, Podcasts? in iTunes?
    Jeff

  • Tempo changing audio files

    What is the best way to slow down or speed up audio in Logic 8?
    follow tempo isnt always available,
    Hope someone can help,
    Cheers
    Bongolian

    Hey,
    I'm not sure about L8, but in L7 the follow tempo is only availabe if the audio was recorded in that particular song, (meaning not Imported).
    Easy solution:
    Bounce down the audio track and then use the bounced track in your song. The follow tempo will be available.
    Cheers

  • Problems with Firefox 13. Can't see online audio file player. Video only works on some sites. All works OK in I.E. Updated Flash. No Change

    Problems began when Firefox 13 automatically updated. tried downloading latest version of Flash 11.2.202.235. No change.
    Video works sometimes on YouTube, not at all on most other sites.
    Audio player not working at all. Either not even visible or downloads to real player versus playing within application such as Amazon.
    Tried enabling/disabling Add ons to find culprit. No luck.
    Everything as it should be in Internet Explorer.
    On my WordPress site has MP3 audio files, and uses a flashplayer to display and play music files. With flash player on, nothing displays at all, (bank space where audio player would normally be displayed)
    If I disable shock wave flash, a text link is displayed that downloads the MP3 in a new window (quick player), Also video doesn't work on any website. If I disable Flash and quicktime, text link to audio file downloads to realplayer.

    hello msandman, there have been quite a few issues with adobe's latest flash update - can you try if flash content is showing up correctly again, when you disable the real-player components like mentioned in the following article: [[Flash 11.3 doesn't load video in Firefox]]?
    otherwise you could also try to remove flash 11.3 from the windows control panel/programs section & [http://forums.adobe.com/thread/889580 downgrade to the 10.3 branch of the plugin], which is still receiving security updates.

  • The audio file can not be changed! - help

    I really need help. I just installed Logic Express 8, and I tried to import a song in order to edit it (as a lead in music bed for a podcast). Every song I import in says I am unable to edit it - "The audio file can not be changed! Volume or file is locked."
    How do I unlock the file/volume in order to edit t? This is the only reason why I purchased Logic and if I cannot do this I spent a lot of money for no reason. Please help.

    OK, basics first..
    if the audio was 'bought' from itunes or some other download, it could have some kind of 'digital rights management' (DRM) on it. So you won't be able to edit anything, it's protected. Nothing you can do there.
    Also make sure it isn't already open in another application that might be 'holding on' to it.
    However, it could be something simple to do with protections on the file itself.
    Locate the music file you imported on your harddisk click on it once so it is highlighted, now press cmd-i, or select file menu and 'get info'.
    There are some settings here where one can 'lock' a file. There is a check box under the 'general' section that needs to be unchecked, there is also a 'permissions' section at the bottom of the 'info' window of the file.
    Make sure you have read and write permissions.

  • HT3659 My Soundtrack pro looses the mic on AJAKona.  It will appear as an input only after clicking on New audio file, then ok, Recording alert appears and then I have my AJA KONA3g back as an input option. loose it again if I change track

    My Soundtrack pro looses the mic on AJAKona.  It will appear as an input only by clicking on New audio file, then ok,  and an Recording alert comes up.  But if I change track I loose the AJA again. How do I fix this?

    Finally found the answer. The recording was done at 48, the audio/MIDI settings were set to 48, but the sampling setting on the export was not, causing everything else to break down. Once all three matched the export worked and the playback audio worked without opening the clip editing screen.

  • How do I change the length of an audio file?

    How do I change the length of an audio file without changing the actual recording?
    I want to aligne start and end points to the rest of my project.

    Well, yes and no. I have tried the Bounce track in place function, but it did not do what I was after. However, today I got an idea that solved the problem. I copied the region I had punched in several times. Then I used the Bounce track in place function. This made a track that was just as long as all the other tracks. Finally I silenced the audio "clips" that I had used to make the region longer. I have now 24 tracks to transfer to the Alesis HD 24 that starts, and ends, at the exact same point. This will suit the Alesis software just fine, I think.
    Thanks for the tips.

  • Changing a length of more than one audio file in same time

    Hi! I'm searching a way to change a length of the several audio files at the same time (this applies to ads that will be broadcast at the radio. The sounds need to have same time accurate to milliseconds). Let's say I've got 20 audio ads, which were originally meant to have 30 seconds, but each of audio file has small differences reaching less than a second. I would like to do a one-off activity, that will change length of each file to equal 30.000 seconds. In a word, is there a way to stretch several audio files, which have different time, to the same length at a same time ?

    Thank you for your reply, problem solved with the help of Adobe CC, but it turned out that one of open-source applications also can do it.

  • Displayed icon for audio files changed with snow install - how to I restore

    After installing 10.6, the icons displayed on audio files (aiff, mp3, etc.) became a black square with a music symbol in it when it should be the default application icon or quicktime icon. The icon in the upper left corner of the info window is correct, but the hideous square displays. How do I restore to the correct icon?

    I have the same problem. I produce a daily podcast ("Mister Ron's Basement") and I have almost 1500 episodes on my hard drives in both the original recordings (aiff files done with Sound Studio) and mp3 versions. They used to have different icons, and even though the aiff files will still open in Sound Studio automatically, they all have the same black square icon. Used to be, at least you'd get an icon that had the word with the file type on it, but no more. I have changed many of the back ones with Candy Bar, after sorting them by file type, but every new file I create, I have to go to get info and change the icon by hand. Not very professional, and a waste of my time. Can I expect sound icon differentiation to be returned to the Macintosh Operating System at some time in the near future?

  • How do you change a music file from quicktime to a mp3 audio file

    i dont know how to change my current music file from quicktime to a mp3 audio file, how do you do it?

    i dont know how to change my current music file from quicktime to a mp3 audio file, how do you do it?
    If you are using a "basic" Mac OS X v10.8.4 install/codec configuration then you can use iTunes to convert to MP3 audio. It has a built in MP3 encoder which you can set up as your default audio import/conversion compression format. Otherwise it depends on how you system's codec components are configured and/or what media applications you have installed.

  • Does "Export all tracks as audio files" output HyperDraw volume changes?

    Does "Export all tracks as audio files" output HyperDraw volume changes?
    Thanks

    I'm pretty sure it just collates all the Regions on each Track to give one file per Track. This would imply that automation would not be included.
    To be certain, you could make up a quick Project with one Region & an automated fade, & see what happens; but I would bet you just get the audio, not the automation.

  • .avi files changed to audio files only

    I do not have Quick Time on my PC asit is 64 bit and QT does not seem to work. I copied a number of beta tapes using PE Pro on a PC that had QT. The file names all showed the QT icon along with the name and .avi. I tried several other video programs with no luck before I go PR Pro which will directly open .avi files. No when I try and import one of these files it appears in th eproject panel as a audio file even thoogh the ID is still.avi. How do I change thes files back to video files?

    Depending on what is inside of the AVI "wrapper," you might not need QT Player, but if its icon is showing, I would puzzle over that. If you would look over this ARTICLE, and report on the CODEC inside the AVI wrapper, that will likely tell the story.
    Good luck,
    Hunt

  • Error message: One or multiple audio files changed in length!

    Hi
    I keep getting this error message:
    "One or multiple audio files changed in length!
    As a result one audio region changed in length or content position."
    But I can't really tell what effect it's having. Slightly worrying though. Any ideas?
    Thanks

    Hello.  No, I have not touched any of the files in the project package.  I don't even know how to access them.  Any ideas?  What triggers this?

Maybe you are looking for