Changing Audio on a Quicktime Movie

I have a Quicktime movie that was made for me. I would like to change the audio on it. I have Final Cut Express HD version 3.5.1, iDVD and iMovie. Where would be the best place to change it. How do I change it? Do I need to give more details? Thanks!

Is there a different technique I need to use<</div>
As I stated earlier, unlink the audio from the video (Command L) and then use the blade tool (b) to cut the portion of the audio clip you don't want ... then delete it with the large Delete key.
Or, keyframe the audio level down during the portions that you don't want to be heard.
-DH

Similar Messages

Since upgrading to osx 10.9.5 the audio on my quicktime movies are now garbled. is there a fix?

since upgrading to osx 10.9.5 the audio on my quicktime movies are now garbled. is there a fix?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" '/S*/*/Ca*/*xpc* >&- ||echo No' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors XPC\ cache );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 50 32 52;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Multiple audio sources for quicktime movie recording

I want to record a Quicktime movie using iSight as the video input, external audio (guitar) via a Focusrite Saffire LE (1874) audio interface and internal audio (a backing track) from either iTunes, Logic 9 or MainStage 2 (I don't care which), so I can record myself playing and then send the video to another guitarist via Dropbox or similar. Is this possible and if so how do I set it up on my iMac?
Thanks.

QuickTime Player Pro, QuickTime X (Snow Leopard) and QuickTime 10.1 (Lion) all include a "New Movie Recording" feature. The camera can be the internal iSight or an externaly connected one and the audio can be internal or line in.
But you can only have one video and one audio source.
QuickTime Player Pro can be used to add additional "tracks" and the .mov container can have up to 99 of them. GarageBand can help you edit the track timing. It also includes other "instuments" and can play your video while you build additional tracks.
I would record via iSight but not include any audio. Then use GarageBand to add the additional audio tracks.

Adding audio to a Quicktime movie (after the fact)

It's been so long since I've done this, can't remember how. And for some reason my Quicktime Player (Pro) help is completely zats, won't work.
Could someone remind me the 1,2,3 to add an audio track to a Quicktime movie? I'm actually wanting to strip the existing audio, and replace it with an audio done in Logic - much lower bitrate, but still very good quality.
All ears,
Ben

No problem.
On the Windows side of things, my help isn't working well either at the moment. Getting a bunch of page not found errors. I think the furniture might have been moved round on the Apple Website, and someone forgot to warn the QuickTime help.
(I'm not entirely sure how the QuickTime help works on the Mac side of things, so I'm not sure how relevant that is to your troubles, though ... can anyone else get their QuickTime help to work at the moment?)

Problems with audio playback in QuickTime movs on site

I'm working with some clients, and posting QuickTime movs for review on my site. Everything was fine until this last pass, when suddenly, half the people said they could see the video, but not hear the audio. I'm posting H.264 video with AAC audio. Even more unusual is that the people with the more recent machines and software were the ones having trouble. The older cpus and software seem to playback the movs just fine.
And it seems to be affecting Windows and Mac users equally.
Any suggestions?

I'm working with some clients, and posting QuickTime movs for review on my site. Everything was fine until this last pass, when suddenly, half the people said they could see the video, but not hear the audio. I'm posting H.264 video with AAC audio. Even more unusual is that the people with the more recent machines and software were the ones having trouble. The older cpus and software seem to playback the movs just fine.
And it seems to be affecting Windows and Mac users equally.
Any suggestions?

No audio when importing quicktime movies

I have a set of Quicktime movies that I'm trying to edit in FCE. I can hear the audio without any problems in Quicktime, but not in FCE.
When I import the files, I get no audio waveforms; the meter bars seem to move ever so slightly, but it's hard to tell. Boosting the audio level has no effect at all.
Details about the QT files:
- 1v, 1a track
- 29.97 fps
- DV/DVCPRO NTSC
Audio:
- mono mix
- 48 KHz
- 24-bit integer
Any help would be greatly appreciated.
JY

I have the same problem, though I don't know as much about audio and video formats as I should. Two questions follow:
My footage plays fine, with audio, in QuickTime, but when I try to import into FCE, it only imports video.
Also, for some reason, I also cannot import these files into iMovie. I get to the step where it asks which movie I'm looking to import, and it won't let me choose as in won't let me physically click on a file a movie file.
Problem with iMovie is that it does not automatically generate thumbnails anymore, for some reason, and I can't figure out how to get it to generate them.
Do you have advice for these two issues (in relative layman's terms?) Thank you so much in advance.

Font changes when exporting as Quicktime movie

Recently my the font in all my titles has been acting up when after I export to a Quicktime movie. The font that I chose will appear for a few seconds, then it will switch to some default Times New Roman or whatever font for no reason. I'm working with HDV footage. The sequence settings and project settings are all the same and when I export I just use current settings. Even odder is I've been working with this project for months (I did recently reinstall the OS and FC studio, but I'm pretty sure all settings are the same. Any ideas?

I've had the same problem, my font kept on blowing up when ever I exported. I found it happened whenever I had DVD Studio Pro open at the same time. As long as I exported with the ap closed it would be fine. Not sure if it's the same issue.

How can I export a movie with audio that I have edited in logic 9 to a quicktime movie

I imported a quicktime movie into logic and added audio and effects but when i export it the original audio from the quicktime movie is still there even though it doesn't sound in logic!

Hi
One of teh final steps in the Export to Movie process is a dialog box where one can select which of the audio tracks embedded within the movie are included.
You must actively de-select those tracks that you do NOT want to include in the Export.
CCT

Perfect audio in FCPX timeline, distorted after export to QuickTime mov

Anyone experiencing distorted audio with a QuickTime movie file exported from Final Cut Pro X? The audio sounds great in the timeline, but muffled and distorted after exporting it. Here's the kicker, I took that same file and opened it using QuickTime 7 and the audio is fine. I took that same file and converted it to a WMV file using Flip Player, and the audio is fine. So it would seem that the problem is the newest version of QuickTime (v10.4). If any of you have come to a similar conclusion, is there a way to remedy this? It's problematic because when I upload the file to YouTube, the distortion is present. Thanks in advance to everyone who can assist with this.
MY SYSTEM:
MacBook Pro (Retina, 13-inch, Late 2013), 2.8GHz Intel Core i7, 16GB RAM
OSX Yosemite 10.10.2
FCPX v10.1.4
QuickTime v10.4

Hi Al,
Here are the steps I use to export:
From the File menu, I select 'Share' and select 'Master File'
In the pop-up dialog box I click on 'Settings' and select 'H264' as the CODEC
I open the rendered file with QuickTime Player and the audio is distorted.
I open the rendered file with QuickTime Player 7 and the audio is fine
I convert the exported file to a WMV file using Pro version of Flip Player. The audio in the resulting file is fine.
I'm no expert but this would on the outset appear to be a problem with QuickTime v10.4. I can't seem to find a way to resolve this. Thank you for your assistance.
FYI - the audio file for the project is pulled in to FCPX as an mp3 directly from the iTunes library via the 'Music and Sound' browser.

Adding a .smi File to a .mov quicktime movie

I have an unsubbed Quicktime movie and both .smi and .srt files containing subs for the movie. How can I attach the subs in the .smi or .srt files to the .mov file? I also have the video in .mkv format, and used the application SmartConverter to change it into a quicktime movie. Is there a way to add the .smi or .srt file to the .mkv file then convert it into a quicktime movie or something?

Hi,
There is also a Myth buster from Paul Randal which says you do not need to keep tempdb data files equal to processor core
Myth-Tempdb data file should always have one data file per processor core
But if you read Microsoft blogs it would say you should have tempdb files as per cores.
Tempdb best prctices
It all boils down to fact that are you facing issue with Tempdb. Does recommendation that tempdb data file equal to logical core always holds true, no it does not always that is what Paul Randal tried to show in his Article. You start with two data files
on different drive and monitor performance of Tempdb if you see PFA,GAM SGAM contention adding a data file would help. These recommendations generally hold true for huge OLTP environment where MS tested various features and your environment might not be same
as the one tested. Its a Good practice not an ideal. Ideal is one that suits your requirement and that would require a testing.
SQL Server tempddb Number of files a raw truth
If you want to Identify contention in Tempdb use below link
Identifying Contention In Tempdb
Recommendation to reduce allocation contention in Tempdb
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

New Quicktime movie icon

Hi,
Is there any way to change the new generic QuickTime movie icon.
Not the program icon. I've already done that, disposing of the grotesque silver Q filled in blue!
It's the smaller icon I wish to replace. The icon for each movie file. Sure, I can change each one individually (plod plod plod). But I would like to just replace the generic, so that each time I download or rip a movie I do not have the silver Q filled in blue on the AVI or MOV white rectangle.
I have Candy Bar, but can't figure out how to do it!
Other than that, SL rocks!
Martin

I don't think Candybar can do it. it can change the icon for teh app itself but not the icons you want. you'll have to do it yourself. control-click on Quicktime player.app and select "show package contents". go to Contents->Resources. There are lot of icons 9and other stuff) in there including icons to be used for all file types like MPEG-4.icns, Movie.icns etc. you have to replace them with your own .icns files. I suggest you back up Quicktime Player.app before trying this.

Audio file missing from MOV when exported as a quicktime movie.

Using Keynote 9, I imported video into presentation that was edited in iMovie 9. When I export the presentation to quicktime movie the audio is missing from the video file. The audio file plays fine in the standard keynote presentation mode.

This is STRICTLY a work around! Official fix will come from Apple as an update more than likely.
Duplicate item first (File > Duplicate). On newly duplicated project change file association type (File > get info). Under name and extension section take out .key). Close Get Info and save with removing .key. Double click to open the file (now a compression). Open uncompressed folder (same name as original file, now shows as a folder). Now in the Data folder find a .mov file named "Recording" with randomly generated letters and numbers behind it. Drag .mov file to desktop or any other directory. Open extracted .mov file with QuickTime to verify integrity. Save as audio file only. Get Info on file again and place .key value at end of file/extension for project. Open project. Under Play menu option delete the recording. Under Audio inspector drag the .mov of audio only to recording back in. Test play project to see if its accurate. Export to QuickTime and see if issue is resolved.
If issue persists:
Export with corrupted audio as QuickTime. Separate the audio from video track. Delete audio. Import the extracted .mov audio file. Share > File. Enjoy.

Export as QuickTime Movie - lose audio sync

I have a 10 minute project that basically is a sequence of 10 nested sequences. It is an HDV project. I need to export it as a QuickTime Movie to maintain the ability to show it in HD. When I do so (using Export->QuickTime Movie - I am not using "Using QuickTime Conversion"), I maintain "Current Settings". The resulting .mov file, when played back in QuickTime Player (or anything else) has a progressively severe loss of audio sync. This is not present when playing the project within the timeline in FCP (6.0.3).
I have tried opening the project on a different computer with a virgin version of FCP 6.0.3, with the same results. I also made sure to render the individual sequences as well as the master sequence. I created a new sequence and added the individual chapters again, with the same result. I tried using the Media Manager to bring the project over to another computer - same problem. I also took this to an Apple One-to-One class with a FCP expert who couldn't figure it out either.
I could really use some help here.

First of all, thank you for responding.
I don't have a capture delay. The audio rate is 48 khz.
Interestingly, I had previously tried the separate export and stitching you suggested, but a strange thing occurred. If the resulting quicktime movie was created through a Save As... command, you wind up with a self-contained movie. When I did that, I started to get weird audio repetitions or dropouts as the movie went on. On the other hand, if I left it a reference movie, this didn't happen.
Anyway, this is a workaround, but it means that the whole thing has to be done over every time I make any change at all, and I am also concerned about getting rid of this problem for the future.
Any other thoughts?

Audio is not synced with video after Exporting QuickTime Movie

I have Canon DSLR footage shot 24p/1080p on the timeline. Timeline settings are the same as the Canon footage settings.
When I Export a QuickTime Movie, the audio is out of sync...
Can someone please help with this issue...
Thanks,

Don't tell me...you edited the files the camera shoots without converting, right? The camera shoots H.264...FCP doesn't like to work with H.264. The problem is that it SEEMS like it will work, but really is rife with issues when trying to work with it. You have encountered one...loss of sync.
The proper workflow is to convert the footage first...
#51 - Canon 5D MkII / Canon 7D footage into FCP
Shane's Stock Answer #51 - how do you bring in footage from the Canon 5D and 7D cameras into FCP to edit?
You need to convert all of the Canon 5D MkII footage from the H.264 format that it records, to ProRes 422 (ProRes HQ is unnecessary...no quality difference) Yes, the file sizes get drastically larger. H.264 is an acquisition and delivery format, not an editing one.
You can use the Canon EOS Log and Transfer plugin that works with the 1D, 5D and 7D cameras. This plugin is great because it brings in the camera's TIME OF DAY as timecode, instead of starting each clip at 00:00:00:00 like Compressor or other conversion software will do.
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=139&mo delid=17662#DownloadDetailAct
Here is a tutorial on how to use it:
http://provideocoalition.com/index.php/ssimmons/story/canon_releases_a_dslr_plug _in_for_final_cut_pros_log_and_transfer_tool/
And the workflow for tapeless ingest into FCP:
http://library.creativecow.net/ross_shane/tapeless-workflow_fcp-7/1
But for a quick fix...change your SEQUENCE SETTINGS to ProRes...render, and then export.

I have FCE 4.0.1 and running OS x 10.7.5 when i burn my movie the audio from my movie clips don't come through . My Sound effects and music can be heard. I export to Quicktime movie, make it self contained then open IDVD for an intro and burn it.

I have FCE 4.0.1 and running OS x 10.7.5 when i burn my movie the audio from my movie clips don't come through . My Sound effects and music can be heard. First I export to Quicktime movie, make it self contained then open IDVD for an intro and burn it. everything sounds great in preview but then ( once again)I lose my audio from my movie clips.

Try Mixing Down the audio before export.
This info may help;
https://discussions.apple.com/message/1060680?messageID=1060680&amp%3b#1060680
Also serch this forum for Mix Down you should find lots of info.
Al

Changing Audio on a Quicktime Movie

Similar Messages

Maybe you are looking for