Changing audio setting

Is is possible to change all the audio in a Captivate project to FM quality? I need to do this to slide audio as well as background audio that is already in the project. If it is possible, how would I go about doing that?

OK, so when you publish your project, as a result of the compression that takes place during the publish process, you are going to lose some (any idea how much ? ) of the sound quality - no matter what your original recoding was done at - right ?
So if I want want my published project to have a sound quality of Nr CD (96 kbps) - I should set the recording prior to publishing to 128 kbps in order that I can later on get down to 96 kbps.
One last question...having recorded my project prior to publishing at 128 kbps, what steps do I have to take when publishing it, in order to ensure the published project comes out at 96 kbps ?
Noel

Similar Messages

No video after changing audio settings

Just got my atv2 and was working fine through HDMI cable. I was in settings and changed audio setting to 16 or some other number and when i turned atv2 back on i get apple logo as normal but when it should start I cant see anything on screen and white led on atv2 flashes once approx every 10 seconds and then atv2 restarts after every 5 minutes or so. Please help have I changed HDMI setting or something?

Surely some one can help. I've tried it on another TV and same thing happens except screen flashes green every now and then.

How does Core Audio set sample rate?

When I play a particular movie in QuickTime, the audio and video are out of sync. The movie plays fine on other computers.
This Mac Pro (OS 10.6.8) is used exclusively for Pro Tools and Final Cut Pro. The audio hardware is a Pro Tools HD Native card:
Native card --> Pro Tools Digital I/O boxes --> Lavry D/A converters --> monitors
The sample rate of the Digital I/O boxes is set by an external master clock, a Lavry Gold A/D converter.
I opened the DigiDesign Core Audio Manager and it says:
Connected @ 44.1K, 32 In/32 Out, Buffer Size 512
Yet the movie is at 48K (I know because I created it in Final Cut Pro), and the external clock is set at 48K. So, I don't know where the 41K in the Digidesign Core Audio Manager came from. This is why I am guessing the problem is sample rate.
Please help me understand what sets the sample rate.
Does the application using Core Audio set it?
If so, how is this made consistent with the sample rate set for the hardware by the external master clock?
Do I have to be sure I always change the external clock setting to be consistent with the movie being played?
BTW, I have not had a sync problem when I play video in Final Cut Pro..........it is always in sync. So, I have never worried about how Core Audio works. The sync problem is only with QuickTime.

Well, here is more information:
- I reinstalled QuickTime 7 and did many other things (trashed preferences,etc)
- I set the audio hardware (Pro Tools/HD Native card) to 48k
- I checked the Digi CoreAudio Manager and it said "Connected at 44.1K", even though the hardware was set to 48K
- I played the problem videos, and all are now in sync
- I check the Digi CoreAudio Manager and it still says 44.1K
- I checked the hardware and it is now set to 44.1K
I know that the videos are 48K, because I created them in Final Cut Pro X.
Does this mean that QuickTime 7 always converts videos to 44.1K, regardless of their sample rate?

Changing audio output device for currently running program

I'm not sure where to put this question, but all my searching hasn't seemed to find an answer...
If I have a program running, iTunes, VLC, a game, whatever, and want to change audio output from say Line Out to Headphones, I have to restart the program for the change to take effect. Is this by design/normal or am I missing something somewhere?

this is actually a quiet significant issue. There is no way in Flash to select the audio output device.
Today people have regular speakers and a separate headset. They all use the speakers for music and the headset for voice. Skype i.e. has the option to choose audio output device and its really handy, because
you dont have to bother to set the default device to the headset everytime you want to use it.
If you set the default device to the headset all other apps will send their audio output to the headset - which is not what you want either.
So people really want to leave the default device set to the speakers and not to the headset.
Nokia did this for Java
JRT 2.1 / Nokia UI API updated to version 1.4:
AudioOutputControl extension for controlling which audio output device, for example the device loudspeaker or earpiece, is used to play back audio
This really is an issue.

How do you change the setting in iTunes for the time-space between songs in your playlist?

I need help changing my setting in iTunes, the time-space between songs. In setting up iTunes I selected the "three-second" and now wish I'd selected "five-seconds". Any help will be appreciated. Thanks.

Thank you Chris.
This was not the exact solution for my problem but by misreading your instructions I accidentally found the answer. Just as simple as you suggest. I had already ensured the Crossfade was unchecked in iTunes. What had actually changed with the last software update was the settings on my ipod. I can't believe I never checked this before.
The solution:
ipod settings > Playback
Audio Crossfade = "Off"

Speech Audio Setting Effects Timing

I'm having a timing issue when using the speech setting in
the audio settings.
If I use the "mp3" setting for the audio setting in the
publish dialogue, my narration (which is set to stream - not event,
so synch should stay tight), timing is just as I designed it.
However, if I set the audio setting to "speech" (in order to bring
the .swf file size down), the timing goes way astray. Nothing else
changes (the audio files are still set to stream, not event), and
yet the audio loses its critical timing.
Anyone else run into this problem, and more importantly, is
there a fix?

I think you've stumbled over a bug, or at least a use case that nobody in the Captivate design team considered when they were working out how Effects should be applied and timed (how to time something when you don't know how long it will be displayed for).
Essentially what the Effects need is the equivalent of the setting on other objects to Display for Rest of Slide. We need a way to Apply Effect for Duration of Object, regardless of what that duration might be.
You should log a Bug/Enhancement request for this.

Won't recapture with new audio setting

when i initially captured some of my clips in FCP 4, i made the mistake of using the audio setting "mono mix".
since then, i've upgraded to FCP 5. i've also finished the project. now, i'd like to go back and recapture the clips, setting the audio to the proper setting of 2 separate mono tracks, the way it should have been in the first place.
i should note that "mono mix" did not result in one mixed down track; it captured two tracks of audio in a stereo pair, listed in the browser as "1V, 2A" with "1 stereo" but i suspect it mixed them in a weird way because they sound quite low and muddy.
in any case, i've been trying to recapture with a new audio setting. however, nothing seems to work. i've tried making all the clips offline, changing their settings with "modify", then recapturing with the audio toggled to 2 mono tracks... it still comes in as "1 stereo" pair. i've tried the other way, setting the log & capture settings to 2 mono, unchecking the "use current clips settings" box... it comes in "1 stereo". i've tried trashing preferences and redoing the above. i've tried putting the clips in a different project.
any suggestions? thanks.

apparently when you capture in "mono mix" it captures 2 tracks, but makes them identical mixes. so you lose all the phasing and mixing from the field and wind up with two dullish tracks. to unlink them wouldn't change this.
however, i think i figured out a way through a post on creative cow -- i exported a batch list of the offending clips and opened this in Excel. then i went in and changed the audio track column manually, to "2 Mono", then imported the batch list back into FCP. then recaptured using these new clip settings.
seems to work! (knock on wood).

The "always allow" button is grayed out in settings regarding cookies, and I can not find where to change the setting. (Restrictions are not on.)

The "always allow" button is grayed out in settings regarding cookies, and I can not find where to change the setting. (Restrictions are not on.) Do you know where I go to change the setting to allow me to "always allow" cookies?

Hi lisaarnett111,
If you are having issues turning on Always Allow for cookies in Safari on your iPad, you may want to check to make sure that you don't have Private Browsing enabled, as noted in the following article:
Turn Private Browsing on or off on your iPhone, iPad, or iPod touch - Apple Support
Regards,
- Brenden

I have the iPhone 4. I recently switched from PC to IMac. I am trying to sync my iPhone, but iTunes will not let me add or remove anything. Do I need to change a setting since I changed computers? Help!

I have the iPhone 4. I recently switched from PC to IMac. I am trying to sync my iPhone, but iTunes will not let me add or remove anything. Do I need to change a setting since I changed computers? I try to add songs from my music into my phone section and it will not go... Plus the playlists on my phone are not updated on my iTunes phone on my computer. Its like it never updated. What am I doing wrong??

Iphone will sync with one computer at a time.
When you sync to another it will delete the current content.
Make sure you have copied everything from your old computer to your new one first.

How do i get permission to use my camera on google plus when i by accident pressed the do not allow button- how can i change that setting?

I want to have a conversation on google plus, but by accident i pressed the do not allow button. How am i able to change the setting?

rwgleaves wrote:
Is there any way I can change this for the entire drive? Doing this one file at a time is crazy!
Pick the entire drive>Get Info>Make sure you have read&write privledges and, of course, have added yourself. Either that, or pick all the files, and, once again, "Get info." You should be able to do this for a large group, not just file by file.

How can i change the setting on my ipad 2? Whenever i read stories in the net after awhile it goeson standby and i have to keep on entering the passcode. Please help.

How can i change the setting on my ipad 2? Whenever i read stories in the net after awhile it goeson standby and i have to keep on entering the passcode. Please help.

Settings>General>AutoLock>Never. Now it will not sleep at all so change it back when you are done reading.

When I tap on the to line to add an address sometimes people's names come up that I don't have as contacts. How can I change this setting?

When I tap on the to line to add an address sometimes people's names come up that I don't have as contacts. How can I change this setting?

The only way that I know currently know of to remove old or incorrect email addresses from the Mail app is to reset the iPad back to factory defaults, which I assume that you don't want to to. You could try leaving feedback for Apple and maybe one day we'll day be able to edit them : http://www.apple.com/feedback/ipad.html#ipad

How to change a setting in the Java Control Panel with command line

Hi,
I am trying to figure out how to change a setting in the Java Control Panel with command line or with a script. I want to enable "Use SSL 2.0 compatible ClientHello format"
I can't seem to find any documentation on how to change settings in the Java Control Panel via the command line
Edited by: 897133 on Nov 14, 2011 7:15 AM

OK figured it out. This is for the next person seeking the same solution.
When you click on the Java Control Panel (found in the Control panel) in any version of Windows, it first looks for a System Wide Java Configuration (found here: C:\Windows\Sun\Java\Deployment). At this point you must be wondering why you don't have this folder (C:\Windows\Sun\Java\Deployment) or why its empty. Well, for an enterprise environment, you have to create it and place something in it - it doesn't exist by default. So you'll need a script (I used Autoit) to create the directory structure and place the the two files into it. The two files are "deployment.properties" and "deployment.config".
Example: When you click on the Java Control Panel it first checks to see if this directory exists (C:\Windows\Sun\Java\Deployment) and then checks if there is a "deployment.config". If there is one it opens it and reads it. If it doesn't exist, Java creates user settings found here C:\Users\USERNAME\AppData\LocalLow\Sun\Java\Deployment on Windows 7.
__deployment.config__
It should look like this inside:
*#deployment.config*
*#Mon Nov 14 13:06:38 AST 2011*
*# The First line below specifies if this config is mandatory which is simple enough*
*# The second line just tells Java where to the properties of your Java Configuration*
*# NOTE: These java settings will be applied to each user file and will overwrite existing ones*
deployment.system.config.mandatory=True
deployment.system.config=file\:C\:/WINDOWS/Sun/Java/Deployment/deployment.properties
If you look in C:\Users\USERNAME\AppData\LocalLow\Sun\Java\Deployment on Windows 7 for example you will find "deployment.properties". You can use this as your default example and add your settings to it.
How?
Easy. If you want to add *"Use SSL 2.0 compatible ClientHello format"*
Add this line:
deployment.security.SSLv2Hello=true
Maybe you want to disable Java update (which is a big problem for enterprises)
Add these lines:
deployment.javaws.autodownload=NEVER
deployment.javaws.autodownload.locked=
Below is a basic AutoIt script you could use (It compiles the files into the executable. When you compile the script the two Java files must be in the directory you specify in the FileInstall line, which can be anything you choose. It will also create your directory structure):
#NoTrayIcon
#RequireAdmin
#Region ;**** Directives created by AutoIt3Wrapper_GUI ****
#AutoIt3Wrapper_UseX64=n
#EndRegion ;**** Directives created by AutoIt3Wrapper_GUI ****
Func _JavaConfig()
     $ConfigFile_1 = @TempDir & "\deployment.properties"
     $ConfigFile_2 = @TempDir & "\deployment.config"
     FileInstall ("D:\My Documents\Autoit\Java config\deployment.properties", $ConfigFile_1)
FileInstall ("D:\My Documents\Autoit\Java config\deployment.config", $ConfigFile_2)
     FileCopy($ConfigFile_1, @WindowsDir & "\Sun\Java\Deployment\", 9)
     FileCopy($ConfigFile_2, @WindowsDir & "\Sun\Java\Deployment\", 9)
     Sleep(10000)
     FileDelete(@TempDir & "\deployment.properties")
     FileDelete(@TempDir & "\deployment.config")
EndFunc
_JavaConfig()
Now if you have SCUP and have setup Self Cert for your organization, you just need to create a SCUP update for JRE.
Edited by: 897133 on Nov 16, 2011 4:53 AM

I no longer want to merge my work laptop with my icloud account on other devices. How can I change the setting for the laptop?

I accidentally agreed to set up my work laptop icloud account to merge with my other devices and want to keep the work information separate. How can I change the setting for the PC at work?

Sign out of iCloud.

I am trying to find out if I can change a setting of the calendar in my iPhone. When I view calendar, in month, I would like to view it with the starting day of the week being Monday, not Sunday. Is it possible to make this change? SS

I am trying to find out if I can change a setting of the calendar in my iPhone.
When I view calendar, in month, I would like to view it with the starting day of the week being Monday, not Sunday. Is it possible to make this change?

Hello SMEvans32
You can use iCloud to share the Calendar, that way she will always be up to date on that particular section of your work calendar. If you want to use iCloud, I would recommend backing up so you have a safe copy of your data.
iCloud: Calendar sharing overview
http://support.apple.com/kb/PH2689
iCloud Setup
http://www.apple.com/icloud/setup/
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Changing audio setting

Similar Messages

Maybe you are looking for