Changing audio track

i am having problems changing tracks on my ipod classic 80gig,if a track is playing and i go to another track and press the centre button to play the new track it just carries on with the track that was playing,any help would be great.
jonx

strange. normally you should be able to play any song, regardless of playlist or anything else.
I don't know since I never used anything besides iTunes, but I think it could very likely be the reason. Your songs show up on the iPod, so they are recognized. But maybe they were transfered not correctly and therefore the iPod can't play them or anything? Try putting some songs on your iPod via iTunes, that's the only way to be sure. If it still doesn't work when using iTunes, take the iPod back to the store and get a new one.

Similar Messages

Audio selection in Cs5.5 Encore auto plays rather then just changes audio track

I am an Encore newbie after moving from DVD SP to Encore for blu ray menu authoring. Ive read and re-read the help files and they seem to be the same for Encore versions going back to at least cs3 for this issue ... so i must be doing something wrong or Encore just cannot do a very basic thing...
I am building a blu-ray with a singel video track and 2 audio tracks. I am trying to link a menu to allow a user to select a 5.1 or 2ch version of audio for a feature film. All shoudl be straightforward. i have a menu with several buttons. Each button links to an audio track in my timeline.
However, when i test my links, instead of just changing the audio and returning to the menu (as per the instructions in the help files ), the film plays from the beginning.
The correct audio track is played, but that is not my intention at that point. I want the user to choose the audio track and then allow the user to press another play button or go to another menu and back again before the film starts.
So how do i just change the audio track but not play it there and then ?
The help says use 'specify link' so i choose that option and select the timeline, yes, select the audio track 1 or 2, yes. But there is no different way to do this if i actually wanted to play the track at that time as well. What is the fundemental bit i am missing here ? Something to do with button type or some werid overide setting i am missing ? Can Encore actually do this ? its rather frustrating having come from using DVD SP which allows you to script everything and set gprm/sprm registers, to a program that does not seem to allow you to do anything beyond very very basic authoring.
Any help would be appreciated. thanks.
mark

maniac101maniac wrote:
However, when i test my links, instead of just changing the audio and returning to the menu (as per the instructions in the help files ), the film plays from the beginning.
The correct audio track is played, but that is not my intention at that point. I want the user to choose the audio track and then allow the user to press another play button or go to another menu and back again before the film starts.
To return to menu after changing the audio or any subtitle track, you should select the desired menu in the Specify Link option and change the audio and subtitle accordingly.
In the example above, what I have done is, I went to the Specify Link, chose the menu as the target and also changed the audio track there and clicked OK
So here, after pressing Button 3 (Item 3), I would return to the menu and my aduio would be reset to audio track 2.
After that, whatever timeline I play, that would be played with audio track 2.
That is just a small example to show how it is done. Set the navigation as you like.

How to change audio track on a flv-video during streaming?

Hello ,
I would like to stream a flv-video, but every time with
different audio-track.
So how can I change the audio track on a video-stream? Is
there any server-side solution for this?
I used to stream the audio on different stream - parallel
with the video stream -, but because of synchronization problems,
it didn't work.
Any idea?
Thanks

Thanks for the helpful response. I'll check out the the options available for shaping the sound with eq, efx and amp sims as you suggest.
It still would be helpful to know if I change an audio track (.aif file) into a midi track in GarageBand or in some other software so I can change the instrumentation of the track from piano to another instrument.
Thanks again!

How do you change audio track of iMovie?

I looked in Help and didn't find an answer to changing out my audio track. Anyone?

The track number refers to the number it is on the original album that you got it from. You can change it in the playlist you have, but it's going to keep that change you made even for the original cd. You could always burn it (will be on multiple cds), name the cd, and then re-import it. If you want to change the track number, that's probably the easiest way. Or you can go track by track in your playlist and change it, and deal with it being changed with the original cd. There's no other way besides clicking on the first track, right click to "get info" and go through the "info" tab and change them manually, as far as I know. You don't have to constantly click get info, either. After you do the first track, hit next and it will go to the next song.

Multicam changing audio tracks

Hi,
I have edited a project in FCP X using Multicam. All has been good, its a learning curve but seemingly not too steep. However, having finished the edit and exported it I notice that I have used the wrong camera for the sound track and want to change it to the sound from the other camera. I thought that it would be as easy as opening up the edit, and then selecting the other audio.....for me not so.....Can anyone give me in simple terms some instructions on how to do it. I feel I'm missing a probably simple step to achieve this. Thanks.
Andrew Boulter
http://www.andrewboulter.com

Select your multicam clip in the timeline, go to the inspector, click "Info" and choose the one you want under "Active audio angle".

Changing Audio Tracks in Multicam

I have a multicam project that I am done editing.Now that I am finished with the cutting, I realize that the audio I was using is from the camera that got wrecked half way through the shoot.( Motorcycle racing and the camera was on a boot that hit a haybale)
Can I change to the audio from a different camera. I would like to keep the same audio in the entire clip. The sound changes from camera to camera.
Thanks,
Randy

I found this tutorial on Mixing Multicam Audio in FCP X. It has some great workarounds for some of the limited audio mixing capabilities when using Multicam. For example, you may want to use more than one camera's audio at the same time but Multicam only allows one at a time. Watch and see. Maybe they'll make this easier some day.

Audio Tracks Help

Hello,
Ok I have a wmv file. Inserted into timeline. Audio track goes to track 4. When I unlink and try to move up to audio track one it doesn't move. It can't drag. Not sure if I set something up wrong in my sequence, also I notice in audio tracks 1-3 in the upper right hand corner there is like a double speaker icon. In track 4 there is only a single one and that is where my track seems to be locked. Sort of new, so is this something to do with like mono versus stereo?? If so how do I change audio tracks 1-3 to mono or just delete them??
Thanks

SOUNDBOOTH and or PREMIERE PRO CS3
I have a questions posed to me about SOUNDBOOTH editing. How can one either in SOUNDBOOTH or in PREMIERE PRO CS3 - edit the playback - so show beat by beat - is that possible? I'm not musically inclined. If I want to cut/edit a sound and match it with a similar of another - how can I go about that?
please email me as i'll forget to check here for replies - [email protected]

Cannot find alternate audio tracks

I have some m4v files created with 2 audio tracks - 1 Dolby Surround for watching on my imac and one AC3 for watching on my Apple TV
In itunes i can select either track, but cannot select them on my Apple TV
When I hold down play/pause, all I get is a list of chapters.......nothing else
I am running software version 3.0.1

i have many m4v files like this also - 2 audio tracks (dolby surround track 1 and ac3 track 2).
appletv does not give the option to change audio tracks and uses just the ac3 track.

Why is it that it would take a very long time [if ever] to change or adjust the tempo of a loop in the audio track when i set it to adjust regions to locators? Until now the spinning wheel of death is still very much spinning. thanks for any help. Is th

Why is it that it would take a very long time [if ever] to change or adjust the tempo of a loop in the audio track when i set it to adjust regions to locators? Until now the spinning wheel of death is still very much spinning. thanks for any help.
Is there another way to adjust tempo of loops the faster way, any other technique?

No clue why the final processes have suddenly started to take so long. Two things I'd try: a) capture from an older tape to see if some problem with the new tape is at fault. And b) check the health of your RAM and the hard drive.
The red frame sounds a bit like a glitch we used to have in OnLocation (actually in its predecessor HDV Rack) which was caused by a partial GOP. But that was a product of HDV Rack recording from the live video stream. It turned out that HDV cameras intentionally interrupt the data stream for an instant upon starting to record--specifically to avoid recording a partial GOP to tape. So my gut says that the tape has partial GOPs at the points where you stopped/started recording.

Global changes on an audio track or between in and out

I've come over from Avid and on Avid I could set an in an out point on an audio track and then changes the values of volume and pan which would then be changed between the in and out points. I'm editing an interview and the radio mic channel has flipped over to one side and I want it in the middle and cannot get it to stay there. I know that I can "write" in the audio mixer and just hold it there for hours, but I'm assuming there is a simpler way. I know about paste attributes but it's not clear what I'm copying and where I'm pasting those attributes. It would be far simpler if I could just select the audio track, set it the way I want it and tell it not to change for the duration. Any ideas?
Thanks

At the lower left of the timeline, there's a button that looks sort of like an upside down V. Click it- the clip overlays. You'll see red lines appear on your audio tracks. Grab the pen tool. Using it, you can click on the red rubber band lines to place key frames where you want. in your case, click once where you want your audio to begin fading out, then click again where you want the fade to end. On this last point, drag the keyframe all the way down, vertically.
As mentioned earlier, you can do this in the viewer as well - using the pen tool.

Exporting a project with multiple audio tracks changes the loudness level regardless of export format

I recently had to submit a TVC and discovered that premiere was changing the loudness level after export, when the TVC failed the quality check.
I checked the audio loudness of other formats that I had exported and the same thing had happened the audio loudness, it had changed.
After a bit of troubleshooting I found a workaround. I mixdown all of the tracks in adobe audtion to one track and then imported it into premeire.
Once I did this the audio loudness was not changed after exporting.
Workflow for when it didn't work.
I used edit in adobe audtion for the audio tracks from premiere.
Matched the audio to the loudness level I wanted, and then saved each track.
Export from premiere.
To Check Audio Loudness
Bring in exported file into new premiere project
Edit the audio in adobe audtion.
Drag the audio file into match audio to check loudness level.
I am using
Adobe Premiere Pro CC v8.1
Windows 7 on PC
Please fix this adobe.

I recently had to submit a TVC and discovered that premiere was changing the loudness level after export, when the TVC failed the quality check.
I checked the audio loudness of other formats that I had exported and the same thing had happened the audio loudness, it had changed.
I have never experienced that or had any need for a work around.
What did your Broadcast Quality Control pick up on?
Audio Levels and Loudness are two different things in this regard.

Selected "Edit in Audition," audio track was split into two files. Preference change?[image included]

I have no idea what kind of shortcut key or preference I changed.
When I select any video on any premiere timeline to "edit in audition" i end up with the audio getting split into two wav files instead of one, as the red rectangular shows. Instead of the single audio track to edit in which you can see in the blue rectangular.
***The blue rectangular I got when I dropped a video directly into audition.
Update: did some testing around in premiere, this issue only happens with clips that are on a timeline, but if I "edit in audition" from "project" (main folder with all material), I can edit it properly.

Its one file with two different dispalys.
You can pull the bottom one down by dragging it down or hit the very little triangle on the right side.

Guitar Rig 2 as audio track insert - preset (patch) change?

I'm either missing something painfully obvious, or it's even harder than I think...
I'm trying to set up to play live using Logic Express 7 for accompaniment and automated control of GR2.
I've set up an audio track with "GuitarRig2 MFX" as an insert. I can see every single parameter within GR2 as controllable with automation EXCEPT the preset (patch). I want to simply change patches at various points in the song. It seems impossible.
This is on a PowerBook G4 laptop. I am using an Edirol FA-66 (firewire) as the audio interface. I have the RigKontrol connected, but not implemented as an audio interface, as there can only be one at a time.
As an experiment, I set up a track with GR2 as an Instrument, and can change patches, but that instance of GR2 is different from the one used as an insert, so the patch change doesn't help.
So, in Logic Express 7, how do I get an automatic patch change to GR2 as an insert (plug-in) on an audio track?

I haven't done this myself yet, but why would you want to do that? You can freeze the track and eliminate the CPU load.
However, if it's not CPU load that concerns you, then you could simply route the output of the track containing GR2 to a new audio track (instead of the main output), solo the two tracks, and record-enable the 2nd track. Press record and go...
I think that should do the trick...hope I didn't miss anything.

Change volume for whole audio track

Hi gang,
I feel like I am missing something obvious ...
I have a stereo background noise that recurs across my sequence. It is pasted into audio tracks A13 and A14 with crossfades between each occurrence. I want to fade the volume of all of them at the same time (i.e. all of the audio clips pasted into A13 and A14). If I select all of them by dragging a box using the mouse, it does not set the volume for all of the clips, only the last
How do you change the volume for a whole track?
Cheers!

whats more, had you already manually adjusted some clips but not others and then wanted to adjust all the clips to the same level regardless of your previous adjustment then there's really no need to remove levels attributes, or redit etc etc ... you just follow the same steps posted above, choosing "Absolute" as the Gain adjustment - all clips regardless of previous levels will be set to the absolute level you specify.

Changing # of audio tracks -no "clip settings" option?

I'm logging clips and realized I only selected 1 audio track instead of 2. Now I have about 50 clips I need to change from 1A to 2A. I read in discussions that if I do "Modify Clip Settings" I can make the change easily.
Only problem is, I have no option for "Clip Settings" under "Modify" in FCP 4?
Am I out of luck?

To add to D Gilmore's post, I think when you go to batch capture you can specify to use the settings in the log and capture window rather than those associated with the clip. Be sure and do a test on one clip before capturing all your clips.
If this doesn't work, you can export a batch list and then modify it in a wordprocessing program.

Changing audio track

Similar Messages

Maybe you are looking for