Changing Audio Units in the input - 3rd time lucky

This is the third time I am posting this in the hope of an answer. If it's not possible then let me know.
If you insert an effect or AU instrument is there a way of removing it or changing it.
I also imported a midi file into a song from another song, Logic kindly decided to assign instruments to these which I did not ask it to. Because I could not remove or change these I created empty midi tracks and moved them into these. Then I deleted the old midi tracks.
I noticed when I open this project it is still loading up these redundant instruments using up valuable resources and the songs struggles enough. How do I get rid of these so they are not taking up resources?

Click the slot (the light blue rectangle in the track) with the name of the plug-in you want to get rid of so it is selected. Keep your mouse-button depressed. A list appears. Choose no plug-in. Or something else from the pop up list.
May is suggest reading the manual and getting some general computer experience?

Similar Messages

Set up Signal Express to log when there is a change in state of the inputs (NI USB-6501 logger)

Hello NI Forum, I have recently purchased digital I/O logger NI USB-6501. This arrived with Signal Express, which I intend to use as a Lite version. I just wondered if it was possible to set up Signal Express to only add a log entry when there is a change in state of the inputs? I have this working on a 0.1sec sample period and can interrogate the logs after recording. Most of the time nothing will be happenning, I just wondered if there was a way to reduce the ammount of data captured? Cheers.

Ah that unfortunate, and yes start/stop conditions for loging are part of the Full version of SignalExpress
Here's the comparision: http://www.ni.com/labview/signalexpress/purchasing-options.htm
Sorry about that

TS3899 cannot receive or send email from my hotmail account, refuses to verify server. I have changed my password, deleted the account numerous times, any solutions? all on ios 6.

cannot receive or send email from my hotmail account, refuses to verify server. I have changed my password, deleted the account numerous times, any solutions? all on ios 6. it was working up until a few days ago and now refuses to load on both my ipad 2 and iphone 4S
in the process deleted all my contact, very annoying.
all help is much appreciated.
interesting that my gmail account does work perfectly.

this may or may not help - but give it a try. On a forum some were reporting that talk21 is now under the yahoo umbrella. below are the steps this use listed. (This was an android forum, but the email settings should be the same. In short it looks like their server names have changed. An existing account may have simply been forwarded - but if you are reinstalling, it may want a clean install to the right servers.) Pay particular attention to the server names and port settings. (this thread was started based on a discussion of Imap vs pop - you are already an Imap person - so ignore that part)
See if this helps.
why settle for pop3, when IMAP works with talk21 and not only does mail get pushed out faster with IMAP, but when you click refresh it will be received faster than pop3. The other advantage is subfolders are also supported with IMAP but cant be seen with POP3. This mail feature works with my android eclair & hero phone and the settings are exactly the same for win mobiles also (not tested). The mail setting up roadmap is the same from what i can remember once in the mail feature for win mobi.
This is what you need to do to setup Talk21 email with IMAP.
Incoming server settings
IMAP server - imap.mail.yahoo.com
Port - 143
Security type - none
Outgoing Server settings
SMTP server - smtp.mail.yahoo.com
Port - 25
Security type - none Also important note - Enable 'require sign-in'
and enter your talk21 username and password The End...works a treat for me p.s. Its only taken me 3 years to work it out with win mobile and recently with android. Finally got it to work...hope this helps all the talk21 users out there. if there are any other similar posts out there with no answer...dont forget to mention my name when passing this post around.

How to change audio port output to input port on mac os x 10.9.2 to connect electric guitar on macbook pro for garageband

How to change audio port from output to input port so that i can connect my electric guitar to play along with garageband. I couldn't the option to change it in my system preferences of sound as my mac os x is 10.9.2. So please help me!!!!!!!!!!!! I want to play electric guitar with my garageband so badly!!! :O
Mac os x 10.9.2. ; Garageband 10.0.2

There is no audio line input on your Mac, get a USB interface, get one that is specified for guitars.

I have a record player hooked up through the audio port. The input volume is registering high, but there is no output anywhere. Help?

I have a record player hooked up to a preamp which is hooked up through the audio port.The sound settings are set to have the audio port be "input". The input volume is registering high with fluxuations in the sound settings, but there is no output anywhere. Do I need some sort of third party application or widget to hear the record i'm playing through the speakers that are hooked up to my computer?

keithstopher,
You may want to check into a USB interface, as I believe you have a Mac with the single audio port, which can be used as input OR output.
You may want to check into something like the following, there are may out there, see what fits your needs best.
http://www.amazon.com/Behringer-UFO202-BEHRINGER-U-PHONO/dp/B002GHBYZ0/ref=pd_cp _MI_2
Hope this helps

Can this html code be changed to speed up the image load time?

I found some html that creates a auto running slide show. I've got three images (small image sizes) but it is slow to start up when the page is first opened. http://web.me.com/phelpssculpture/Site/test.html this is the escaped code:
<center><img id='imageholder' src='' ></img></center>
<script type='text/javascript'>
images = new Array();
images.push('http://web.me.com/phelpssculpture/Docs/typewriterprpage.jpg');
images.push('http://web.me.com/phelpssculpture/Docs/royalprpage.jpg');
images.push('http://web.me.com/phelpssculpture/Docs/Lovetest.jpg');
var image_index = 0;
function rotateImage() {
if (image_index == images.length - 1) { image_index = 0 } else { image_index++ }
document.getElementById('imageholder').src = images[image_index];
setInterval('rotateImage()', 5000);
</script>
I have a page: http://web.me.com/phelpssculpture/Site/Resume.html
that has a rollover image (from OldToad) that has two images about the same file size and located in the same folder on my iDisk as the other slide show images but it seems to load instantly.
this is the escaped code:
<SCRIPT LANGUAGE="JavaScript">

</script>
<a href="http://web.mac.com/phelpssculpture/Site/royal.html" onmouseover="image1.src=loadImage1.src;" onmouseout="image1.src=staticImage1.src;">
<img name="image1" src="http://web.me.com/phelpssculpture/Docs/royalprpage.jpg" border=0></a>
Does anyone know if it's possible to improve the html of the slideshow snippet to speed up the initial load time?
Thanks, David

Ethmoid:
There are seven different pages: http://web.me.com/phelpssculpture/Site/movieroyal_davidphelps.html
Each link is directed to a different page.
I created the basic layout on one page and then duplicated the page six times.
the links are in one text box ( that's why they're lined up well ) and each individual word is activated as a link. I changed the background color of the forward tab to match the color of the main shape and used the send forward or send backward command to get the tabs to look right on each page.
The only problem with the words being in a single text box is that explorer doesn't render the spacing correctly and they fall off their respective tabs. When I get time I will put each word in it's own text box ( it's not that hard to align them ) so it will render properly in explorer.
Sincerely, David Phelps

How to change apple account in the ipad many times?(can't sign out)

How to change accounts!
I have multiple accounts not me but the whole family has apple accounts since we all are apples. Anyway everyone has a no credit card account except my dad. His account is synced in my sisters iPad. My dad changed the password so that we don't buy stuff the problem is we can't sign out of our dads account! I mean when we go to ipad:setting->store we already see that its already signed in my sisters account! But the problem is whenever my sister wants to update or download a free app it gives my dads email & wants us to fill the password! We already signed out!
We tried logging in via itunes store then syncing the ipad but nothing happened!
The apple retail store said after you submit the email of your ipad the only solution is to format it. But here is the big problem lets say we formatted it & after few days/months etc we wanted to buy an app we couldn't change the account to our dads account! Since we already are having trouble logging out of our dads account.
So please tell me how to change the account many times! Because I couldn't change it in the iPad nor in iTunes in my iMAC.

The apple retail store said after you submit the email of your ipad the only solution is to format it
Your iPad does not have an email address.
You will need to add a CC card to verify your account. The CC info can then be removed and the account used normally.
It would likely be easier to simply update the apps on the computer then sync the iPad.
iTunes can be authorized for all accounts then all apps can be updated at once.

Audio out from the input jack

topic decisions are hard... sorry if this is in the wrong place.
anyways, this is kinda simple. is there any way to naively use my audio input port to listen to on the macbook? by this i mean, plug in an auxiliary cable from an ipod, or even another computer, and listen to the audio it outputs?

You can use GarageBand to monitor any audio source that is connected to the Mac's input. Make sure your audio input is set to Line In in the Sound Preference panel. Then in GarageBand just select New Track and choose Real Instrument. In the Track Info box, set Monitor to On, and adjust the volume as necessary.
You can also use QuickTime Player to monitor audio if you get the QuickTime Plus upgrade ($30). Just select New Audio Recording and turn up the volume in the little Audio Recording window.
Audio monitoring is turned off by default to prevent feedback from the built-in microphone.

Question: Changing Essbase Unit in the Disk Drive

Hello to all,We have to change Hyperion Essbase 5.0.2 p7 from unit F:\ to C:\ because unit f is near to dissapear. It?s posible to do this without export all databases and reinstalling the server???Thanks in advance,Eduardo Fern?ndez S?nchez

If you are talking about the Essbase OLAP Server installation, the answer is no. I believe that you have to reinstall to change drives. Drive information is embedded in some of the server files and app files. Did you know that you can change the drive that the ind and pag files are stored by db? This is done on the storage tab of the database settings dialog. This might provide an option for allocating data to other/multiple drives.<br>--<br>Jeff McAhren<br>Dallas, Texas<br>

How to change graph based on the input date given by the user

Hi all,
I am using jdevloper 11.1.2.1.0,In my case i need to draw a graph depending on the date range given by the user.Whenever the user changes the date the graph should change according to that.So can anyone help regarding this.
Thanks in advance
Sri

Create a VO that accepts parameters for the date range.
Base graph on VO
Add the execute with params operation to your page.
Similar to this: https://blogs.oracle.com/shay/entry/filtering_records_by_time_with

Can i sell audio units in the app store?

that's the question. My guess is that my "app" could be an installer for the AU...?

See thes previous discussions:
App Store Updates (but only Updates)...: Apple Support Communities
Apps suddenly don't update: Apple Support Communities

Hopefully 3rd time lucky but PLEASE HE

I have recently bought a cd player/tape deck combo unit with a USB port for docking the mp3 player. The Creative Zen I have,when connected says no device found.Yet my daughters $20 mp3 toy connects no problem.Any ideas?

i dont know what to tell you.. try resetting your player. makesure your deck is compatible for usb 2.0

Possible to override the remotes "change audio" button?

I'm creating a DVD that has multiple audio tracks for a single video track. I'm also programming in subtitles for the same track(French). The two audio tracks have different versions of dialogue. So, that means that I need two subtitle tracks – one for each audio. I understand how I can use stories and scripts to associate the proper subtitle track with the corresponding audio track,
BUT
my problem is this: it is necessary to allow the user to switch back and forth between the audio tracks whenever they want. So, if a French user is watching with subtitles on, and switches the audio using their remote mid-stream, then I need a way to change the subtitles to match the now-active audio.
The best way I can think of to do this would be to hi-jack the functionality of the "change audio" button on the remote, and make it run a script that changes audio, then checks subtitle settings and changes them as well, if appropriate.
Can this be done in DVDSP? I've found promising entries in the advanced connections display, but they don't respond to my initial attempts.
Thanks for any help.
Patrick

Hey. Thanks. I hit a ton of pages searching, but missed that thread post. It's exactly the same problem. I suppose my only hope is, fingers-crossed, more DVD players support the targeted scripting of remote buttons these days???
Well. I noticed there were several other programs mentioned in that thread, which I'm going to look up now, but it seems that this is a "supported by DVD players" problem rather than a "my program can't do that" problem.
Something occurs to me. Is this a problem that could be circumvented by going to Blu-ray? DVD SP has a lot of buzz about supporting Blu-ray projects, would Blu-ray players be more likely to support this remote-based scripting???
P
Message was edited by: poltrain

Using Spaces with Audio Units?

I was trying to figure out if it is possible to have specific audio unit device displays in separate "spaces". It would be nice to have an entire screen designated for each window.
all i've tried so far is dragging the window, but it only seems to follow the space that garage band is displayed in.

Right now im actually using Ableton live rather than Garage band. In Live you are able to have the audio unit window open of the selected scene. when you scroll through your instruments, (if you have the AU edit window enabled) the different windows will pop up. i was trying to figure out a way to arm an instrument at the same time as viewing the AU via some sort of midi command (ie. arm track & ctrl+2 for my second space)
As far as i know, the audio units are the same no matter what host you use, so i thought i'd see if anyone here has figured it out.
also, does anyone know how to change the size of the AU window? all of mine are fixed at an awkward size.

Are Logic's instruments and effects Audio Units yet?

I quote from the logic manual: +"Audio Units is the standard Mac OS X format for real time plug-ins. It can be used for audio effects, software instruments, and Generators. The Audio Unit format is incorporated into the operating system, and installed Audio Unit plug-ins can be simultaneously accessed by all applicable programs. Logic Pro supports all Audio Unit format plug-ins."+
If this is the case, it seems odd to me that the "audio effects, software instruments and Generators" that come with Logic are not Audio Units (or weren't in Logic versions < 8).
"Why do I care?" you might ask? Well, mainly because I'm interested in using different Audio Unit hosts -- specifically, I'm playing with "live coding" (see www.toplap.org), and the instruments and effects in Logic would be wonderful to be able to live-code to.
I just scanned through the manual (it's nice that it's posted), but it mainly focuses on the Audio Unit host features of Logic, and doesn't mention the components.
Can anyone answer whether this decision has been changed yet?
thanks!
dylan

You're confusing an API with a set of Plug-ins. Yes, Logic's plug-ins are all AU's. They all conform to the AU specs. However, they are exclusive to Logic. To believe that the plug-ins will ever be available outside of Logic is more folly than anything else. It would go the same for any DAW. Logic is no exception to the rule.
jord

Changing Audio Units in the input - 3rd time lucky

Similar Messages

Maybe you are looking for