Changing axis data(other than time in x-aix)

requirement is to plot a graph with voltage in x-axis and counts in y-axis. I have formed a 2-d array and fed as input to graph.
Could you please guide me in changing the axes accordingly.
Krithika
Attachments:
Block dia.JPG ‏40 KB

Thanks for the response
Ok, let me be more clear in my requirement.
sample data i want to plot:
Vol         Counts
16           16.25
22           63.25
I have attached the vi now and the graph displays 2 plots ( red and white). The white plot is the 1st col in the aray built ( vol value) and i am not sure what is the red plot and i want to change the graph properties in such a way that vol values are on X-axis and counts values are on Y-axis.
i am beginner in using labview, kindly bear with me...
Krithika
Attachments:
Plot - Counts.vi ‏47 KB

Similar Messages

Vado central changes clip dates to transfer time

vado central changes clip dates to transfer time When vado central transfers movies from vado hd onto my imac, each clip gets the date of the transfer, not the date the movie was taken. I have the latest vado central for macs (..0f6). I've tried both "Transfer" and "iMovie" download methods from vado central. When I use "Transfer", the file in the Finder has the download time, and when I use "iMovie" the date in imovie (09) is also the download time.
If I open up the vado hd dri've in the Finder and look at the file on the device, it has the correct time and date, when the movie was taken. If I drag the file from the dri've onto the desktop myself, the original, correct time and date is preserved.
So, it's vado central that is rewriting the time and date on each clip when it transfers it onto the computer.
Is this just me? Or just macs? I haven't seen other complaints about this. I have the big and unhappy job ahead of me to guess and fix a bunch of dates.

Thanks for your help. My original inquiry did not contain enough detail, so I have added more as follows:
We are not changing any file heirarchy structure or file names. I should have pointed out that we are using an Avid ISIS system for shared storage and all our project files and capture scratch files go there. We always use Log and Transfer to import AVCHD files.
"Macrosextended" format is a new one on me. I couldn't find anything about it in Final Cut help, System Settings, or User Preferences; or on the internet. We set the Scratch Disk destination for all our Final Cut systems to the ISIS Workspace we named "Project_Files" on the ISIS 5000.
We normally use Sony XDCAM EX cameras and have had no problems with their files. The AVCHD camera we use in some situations is a Sony HXR-MC50U.

How can i change the data from one Time Capsule to another?

How can i change the data from one Time Capsule to another?

Do you mean copy it? If so, see #18 in Time Machine - Frequently Asked Questions You'll need section 2 there.
If you mean something else, please clarify.

Taking recommendations for good sync/backup program (other than Time Machine)

Hello everyone,
I'm on the lookout for a good file synchronization program (other than Time Machine) which I can use to make one-way backups of specific subdirectories. The ideal program would do the following:
1) Do one-way synchronization of user-selectable subdirecotries within a directory A to directory B either on same hard drive or on external hard drive
2) Can be set up to make sure that B has the exact subdirectories/files as A, deleting any that are not present in A and adding anything that is added to A or anything that has been changed in A
3) Will not generate useless junk files that require me to manually clean up after them
4) Will not alter files and directories in A in any way
5) Will be inexpensive
6) Will not interfere with Time Machine, which I already use to backup multiple volumes to a single external hard drive.
I checked the App store first, but was disappointed that all three apps had mixed reviews, and none had recent reviews attesting to their efficacy (which I always interpret as a bad sign).
I also did a quick search for third-party programs, but their websites will only have good reviews, so naturally I'm checking here first.
Basically, I want this program so that I can use it to sychronize files to my Cloud (Box, Google Docs, Dropbox) directory to share with my friends, and also to make redundant backups of sensitive files to additional external hard drives not being utilized by Time Machine.
Any input would be greatly appreciated.

CCC can be set up to copy just selected directories, or the entire disk. It does not need to make a full clone (although a full clone is a good way to have*something* that functions in case of emergency).
I take the approach of using a tool that can do much more than simple because it can do *that much more* in a pinch.
I gave my best advice, and have not investigated in more specialized tools.
Good luck to you.

Can LSMW upload data other than Master Data

Dear Friends,
Can LSMW upload data other than Master Data, e.g. Want to upload the Vendor Invoice line items with single Debit and multiple Credit line items are there and also more than one GL a/c are involved.
Thanks in advance.
Regards,
Mahendra Dev

The answer is YES.
There is no issue issue if you have different GL account.
The issue is if you have multiple line item (which are differeing in each entry).
For this, if you want to use LSMW, check for program, but not the recording method option.
Regards,
Ravi

BAPI for changing delivery date and delivery time fields in LIKP table

Hi All,
Is there any BAPI or function module to change the delivery date and delivery time in LIKP table ?
Please tell me experts if exists.
Thank you,
Raghu.

try these:
BAPI/FM to update LIKP and VTTK tables
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/bapi-for-changing-sales-headertable-likp-662800

How do I remove the photo dates other than with Sport Removal?

How can I remove the photo dates that appear in yellow from a photo other than using the Spot Removal tool which has not worked?

While I agree that more detail is necessary from the original poster ... maybe even a screen capture
I don't know if this is what the original poster means, but when I have tried to use the Lightroom 5 Enhanced Spot Removal Tool for this purpose, I could never obtain a solution that seemed to remove the offending object and fill in the desired area with a relatively continuous and natural looking result. It always seemed clear to me, when I tried to do this, that the result always had un-natural looking discontinuities in the end result caused by my application of the Enhanced Sport Removal Tool.
And so, in my case, to eliminate the dates from the bottom of my photos, I wound up using different software ... in my case Photoshop Elements, which produced a more satisfactory result.
On the left is the version of the photo created by Photoshop Elements, the date is missing (and at the bottom right, a lamp to illuminate the sign is also missing); while on the right is the image with no attempt to remove the date and lamp. My attempts to reproduce the removal of this date via Lightroom were unsuccessful, the grass never looked natural, the grass always had discontinuities which made the result unsatisfactory, and I did not save the Lightroom attempts to remove the date and lamp. (And if you look carefully on the left, you can see places where the shadows abrupty have disappeared, an artifact of the process, however I still deemed the photo on the left to be successful at the removal of these items, as I don't usually focus on the shadows)

Solutions...anyone have any for the activation problems other than time cha

I am waiting now for 17 hours. Anyone have any solutions other than waiting and change the clock?

I have used all of the following on Maversicks, with no issues at all:
iPhoto
Aperture
Acorn
Graphic Converter
Intensify Pro
Snapheal
I've not seen any reports indicating any issues with other apps either. I would strongly echo Larry's comments about App Store reviews, and reviews on download sites and forums up and down the internet. The great thing about the internet is that everyone has an opinion, that might also be the worst thing.
The problems with these comments are manifold: for a start, happy people are less likely to review, unhappy happy are much more inclined to. That's why we don't have thousands and thousands of posts on this forum from all the people who have no problems saying "look I have no problems". Unhappy people get cross and are more likely to express that anger in negative reviews.
Then what about the reviewer? What is his or her knowledge, experience and skill level? No doubt they are having problems, and real ones, but how do you know if their issues are problems with the app, their own inexperience, third party conflicts and so on. I've seen people on here claim the fact that iPhoto won't edit video is a bug. I've seen hundreds and hundreds of posts from folks on here who are certain they've found a bug, only for their glitch to be resolved. No review is worth anything unless you know something of the reviewer, his or her knowledge and experience.
So frankly, I never bother with those reviews on any such stores, not just iPhoto on the Mac App Store.

How does Time Capsule treat data other than disk images?

Hi there
I have a 3TB TC to use primarily as a wireless backup, as intended by Apple.
However, I wish to temporarily transfer a couple of GBs of data to it for transferring across to another machine.
I seem able to do the above, but my question is: how does the TC treat the two different types of data?
- Is it a better idea to partition the drive first?
- Is the TC likely to automatically delete the original data, like it does with old disk images, when the disk gets full?
- Can the TC handle the disk images and the original data side-by-side?
Just need some help understanding the 'Apple Magic' with this one!
I do realise that having the original data on the TC won't help me if it fails, but like I said, this is a temporary measure. Please don't post about this, as you won't win yourself any points - you'll just look like a smart-*** and annoy everyone.
Thanks in advance!

1. The Time Capsule will not automatically delete data that wasn't originally put on it as part of a Time Machine backup.
2. It isn't possible to partition the Time Capsule. Network drives can only be partitioned by software specifically designed to work with that drive.
(67818)

CUP: Request type change account- Change of user data other than roles

Hi Experts,
I am using the request type change account to change the user type and/or validity of the user. In the description of this request type it says I can use it to request additional access and other changes to an account. Yet when i try to change user validity.. CUP asks me to select one role when I try to submit the request..
Is there any thing else that I need to do so that the request type works for account changes as well?
Thanks!

Hi,
Go to End Configuration -> End user personlization, select the checkbox next to 'Roles' and click on change. Change the 'Manadatory' dropdown to 'No'. Now, save the changes and create the change request.
Alpesh

W7: User Profile Service service failed at log on: Apparently W7 is no longer creating any user profile data other than username and picture.

First time poster, but I think I've done my homework on this issue.
This issue has similar symptoms to a problem with vista: http://www.vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html
However, it is definitely not the same issue (see further).
Current Config:
HP dv7-1450.
W7 RC 7100 x64
Last update (up to date as of 8/31/09) installed succesfully 8/26/09 and should be unrelated to this issue (not verified yet by a pre-update restore).
Running with Admin account while diagnosing/troubleshooting.
Currently have two working accounts, one standard, one admin.
Symptom:
New user accounts cannot be logged into. On an attempted login to the new account, the following information is displayed on the login screen: "The User Profile Service service failed the logon. User profile cannot be loaded." Windows then logs off the operator and returns to the initial user selection screen. All other aspects of use are normal.
Current Diagnostics:
First attempts to resolve this problem were to recreate the new account. This was attempted when logged in as both Standard and Admin. This was also attempted under safe mode. This has been attempted with virus protection disabled. All to no difference in the symptom.
The similarity to the Vista issue (linked above) caused me to check the registry entry under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\ for the new profile (as suggested by that link). Unlike that issue, there simply is no entry for the new user. Examination of the new log entries from creation of account to attempted log in provides the following entries:
Level Date and Time Source Event ID Task Category
Information 8/31/2009 12:34:31 PM Microsoft-Windows-Winlogon 6000 None The winlogon notification subscriber <SessionEnv> was unavailable to handle a notification event.
Warning 8/31/2009 12:34:11 PM Microsoft-Windows-Winlogon 6001 None The winlogon notification subscriber <Profiles> failed a notification event.
Information 8/31/2009 12:34:11 PM Microsoft-Windows-Winlogon 6000 None The winlogon notification subscriber <SessionEnv> was unavailable to handle a notification event.
Warning 8/31/2009 12:34:11 PM Microsoft-Windows-Winlogon 6001 None The winlogon notification subscriber <Sens> failed a notification event.
Error 8/31/2009 12:34:10 PM Microsoft-Windows-User Profiles Service 1500 None "Windows cannot log you on because your profile cannot be loaded. Check that you are connected to the network, and that your network is functioning correctly.
DETAIL - Only part of a ReadProcessMemory or WriteProcessMemory request was completed.
Warning 8/31/2009 12:34:10 PM Microsoft-Windows-User Profiles General 1509 None "Windows cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm to location C:\Users\TEMP\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm. This error may be caused by network problems or insufficient security rights.
DETAIL - Access is denied.
Error 8/31/2009 12:34:09 PM Microsoft-Windows-User Profiles Service 1511 None Windows cannot find the local profile and is logging you on with a temporary profile. Changes you make to this profile will be lost when you log off.
Warning 8/31/2009 12:34:09 PM Microsoft-Windows-User Profiles General 1509 None "Windows cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm to location C:\Users\{New Username}\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm. This error may be caused by network problems or insufficient security rights.
DETAIL - Access is denied.
Naturally I started with the earliest error first, and decided to look to see what is going on. The file that is trying to be copied is there, but the destination folder does not exist. As near as I can tell, whatever process (the User Profiles General Service?) is trying to perform the copy does not have sufficient access to perform the operation. Specifically I suspect it may not be able to create the appropriate folders before performing the copy. Interestingly, it appears that when windows attempts to open/create a temporary account profile, the same issue occurs. Since there is no registry entry either, I suspect that the issue also extends to the creation of registry keys, but I am not familiar enough with the sequence of events in the creation of a user profile to determine if this would come before or after a user profile's first login.
I attempted to find more information, and was able to investigate the UPS diagnostic event log (for a different, but identical attempt at creating and using the new profile). The following two (unhelpful to me) log entries were generated.
Level Date and Time Source Event ID Task Category
Information 8/31/2009 12:34:10 PM Microsoft-Windows-User Profiles Service 1002 (1001) "The description for Event ID 1002 from source Microsoft-Windows-User Profiles Service cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
The message id for the desired message could not be found
Information 8/31/2009 12:34:09 PM Microsoft-Windows-User Profiles Service 1001 (1001) "The description for Event ID 1001 from source Microsoft-Windows-User Profiles Service cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
It seems to imply that the User Profiles Service may be corrupted, but this may also be unrelated. I do not know how to specifically repair this service anyway (but am open to try it if someone can walk me through it a bit).
There's the info. I'd like to figure out how to watch the account creation process in more detail to see if I gleen more, but I don't have the experience to know what to do to enable such a log. I will not perform a reinstall and am loath to do a restore, instead looking more for a cause and effect repair: something that would actually help MS fix the problem rather than have the customer fix the symptom.
Thanks in advance to responders!

First time poster, but I think I've done my homework on this issue.
This issue has similar symptoms to a problem with vista: http://www.vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html
However, it is definitely not the same issue (see further).
Current Config:
HP dv7-1450.
W7 RC 7100 x64
Last update (up to date as of 8/31/09) installed succesfully 8/26/09 and should be unrelated to this issue (not verified yet by a pre-update restore).
Running with Admin account while diagnosing/troubleshooting.
Currently have two working accounts, one standard, one admin.
Symptom:
New user accounts cannot be logged into. On an attempted login to the new account, the following information is displayed on the login screen: "The User Profile Service service failed the logon. User profile cannot be loaded." Windows then logs off the operator and returns to the initial user selection screen. All other aspects of use are normal.
Current Diagnostics:
First attempts to resolve this problem were to recreate the new account. This was attempted when logged in as both Standard and Admin. This was also attempted under safe mode. This has been attempted with virus protection disabled. All to no difference in the symptom.
The similarity to the Vista issue (linked above) caused me to check the registry entry under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\ for the new profile (as suggested by that link). Unlike that issue, there simply is no entry for the new user. Examination of the new log entries from creation of account to attempted log in provides the following entries:
Level Date and Time Source Event ID Task Category
Information 8/31/2009 12:34:31 PM Microsoft-Windows-Winlogon 6000 None The winlogon notification subscriber <SessionEnv> was unavailable to handle a notification event.
Warning 8/31/2009 12:34:11 PM Microsoft-Windows-Winlogon 6001 None The winlogon notification subscriber <Profiles> failed a notification event.
Information 8/31/2009 12:34:11 PM Microsoft-Windows-Winlogon 6000 None The winlogon notification subscriber <SessionEnv> was unavailable to handle a notification event.
Warning 8/31/2009 12:34:11 PM Microsoft-Windows-Winlogon 6001 None The winlogon notification subscriber <Sens> failed a notification event.
Error 8/31/2009 12:34:10 PM Microsoft-Windows-User Profiles Service 1500 None "Windows cannot log you on because your profile cannot be loaded. Check that you are connected to the network, and that your network is functioning correctly.
DETAIL - Only part of a ReadProcessMemory or WriteProcessMemory request was completed.
Warning 8/31/2009 12:34:10 PM Microsoft-Windows-User Profiles General 1509 None "Windows cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm to location C:\Users\TEMP\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm. This error may be caused by network problems or insufficient security rights.
DETAIL - Access is denied.
Error 8/31/2009 12:34:09 PM Microsoft-Windows-User Profiles Service 1511 None Windows cannot find the local profile and is logging you on with a temporary profile. Changes you make to this profile will be lost when you log off.
Warning 8/31/2009 12:34:09 PM Microsoft-Windows-User Profiles General 1509 None "Windows cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm to location C:\Users\{New Username}\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm. This error may be caused by network problems or insufficient security rights.
DETAIL - Access is denied.
Naturally I started with the earliest error first, and decided to look to see what is going on. The file that is trying to be copied is there, but the destination folder does not exist. As near as I can tell, whatever process (the User Profiles General Service?) is trying to perform the copy does not have sufficient access to perform the operation. Specifically I suspect it may not be able to create the appropriate folders before performing the copy. Interestingly, it appears that when windows attempts to open/create a temporary account profile, the same issue occurs. Since there is no registry entry either, I suspect that the issue also extends to the creation of registry keys, but I am not familiar enough with the sequence of events in the creation of a user profile to determine if this would come before or after a user profile's first login.
I attempted to find more information, and was able to investigate the UPS diagnostic event log (for a different, but identical attempt at creating and using the new profile). The following two (unhelpful to me) log entries were generated.
Level Date and Time Source Event ID Task Category
Information 8/31/2009 12:34:10 PM Microsoft-Windows-User Profiles Service 1002 (1001) "The description for Event ID 1002 from source Microsoft-Windows-User Profiles Service cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
The message id for the desired message could not be found
Information 8/31/2009 12:34:09 PM Microsoft-Windows-User Profiles Service 1001 (1001) "The description for Event ID 1001 from source Microsoft-Windows-User Profiles Service cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
It seems to imply that the User Profiles Service may be corrupted, but this may also be unrelated. I do not know how to specifically repair this service anyway (but am open to try it if someone can walk me through it a bit).
There's the info. I'd like to figure out how to watch the account creation process in more detail to see if I gleen more, but I don't have the experience to know what to do to enable such a log. I will not perform a reinstall and am loath to do a restore, instead looking more for a cause and effect repair: something that would actually help MS fix the problem rather than have the customer fix the symptom.
Thanks in advance to responders!
To resolve this issue, I suggst you delete the file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm.Arthur Xie - MSFT

How to use rtp to transmit data other than audio / video

hi all,
as you all know the jmf is based upon a specific paradigm:
data source -> player (processor) -> renderer.
i am not being very precise on this but that does not matter.
i want (for testing purposes) to create a tool that transmit some custom data
(maybe even nonsense) over the rtp packages.
so as you may now see this would not work quite right with the mentioned
paradigm since there would be no audio/video to play-process-render.
so how would i go about to utilise the rtp abilities of the jmf without adhering
to the whole player-whatever shebang.
what i have figured out is that there is a way to transmit custom rtp-payload.
there is even an example on the jmf solutions page but even this one uses
an audio format (pcm).
i hope what it is clear to the dear reader what i want to do and maybe some-
one can help me with this.
p.s. i am not one who wants to get the whole source code (like so many
others do on this forum) for a project someone may have done on this, what
i need is a hint in the right direction.
thanks for your attention and thanks in advance for any useful hints.

Hi, I would like to make some comments that may help
you to find out how to manage your problem.
If you have a look to the JMF 2.0 API, Guide,
"Understanding the JMF RTP API", Figure 8-2
http://java.sun.com/products/java-media/jmf/2.1.1/guide/RTPArchitecture.html#105171
you can notice that the processor is not essential.
In this pciture, the processor is inserted between two datasources,
to let you perform some operations on the media that is read from
a file or a capture device.
But the SessionManager just needs a DataSource.
With what you say, I can imagine that you want to transmit
real-time data that is not related to standard media formats.
In principle, the only think you must do is to extend the
javax.media.protocol.DataSource abstract class and implement
it at your own convenience.
Once your custom class is written, you can call the SessionManager's
method createSendStream(DataSource ds, int streamindex) passing
for argument an instance of your mentioned custom implementation.
Hope this helps.
Good Luck ;-) !

Is there anything backing up my system other than Time Machine?

I have a Mac Pro & recently had to reinstall the OS. I didn't setup Time Machine because I didn't have another external drive to back things up to. I made some changes to my system that resulted in it not being able to boot up. Is there anything in SL that will allow me to restore my system to earlier today?

I did a bunch dumb stuff. Stuff that I won't be doing again. I was able to get back to where I started. I basically did what was stated above. I just installed SL over the top of stuff & miracualously, my apps were saved. MAN, you gotta love this OS.
I really apprecaite everyone's help with this. I always get help on this forum & usually nobody tells me how dumb I am. Thank you for not pointing that out. I know that was dumb. I didn't need to be reminded. You guys are great!
This time. I'll implement Time Machine & this won't be an issue.

Changing Axis data values in OBIEE 11g Graph

Hi ,
I have a graph with three dimensions and a single measure . So , on x axis I am getting the values with two dimensions like
Customer1 2013
Customer1 2012
Customer1 2011
I want to change it to Customer1 only . Can anybody suggest how can we change this.

Why don't you just remove the Year dimension from the "Group By (Horizontal Axis)" section?

How do I change DHCP range other than standard options

Recently I discoverd that the settings of the DHCP range of my Time Capsule changed after an update. Through my provider we have received a DHCP-range so I can access the disks remote via BTMM. Due the the internal fiber network it was necessary to adjust this. The range which was set started with 37.17. After the update it is only possible to choose from 10.0, 172.16 or 192.168.
The problem now is that I cannot remotely access my TC from outside the office. Can anyone please hand me a sollution.
See screen captures below
NEW:
OLD

This is interesting one.. normally the setup when using a block of IP's is not NAT at all. NAT must use the private IP address range.
So I am not sure how it worked in the old setup.
On the Internet tab.. you should select the static IP.
Then on the network tab, you set the dhcp to the actual range of addresses that you have been given.. surely not the whole block of 200 addresses.
That is just how the Apple auto fills it in.
It is only if you NAT that you would then have issues with the private IP range.
In this case you are NOT going to NAT. You are applying an ISP provided range of IP addresses to your clients.. and you must use just dhcp..
I cannot understand how you OLD picture with dhcp and nat could have worked. But it was a mistake in an older utility.. at a guess.

Changing axis data(other than time in x-aix)

Similar Messages

Maybe you are looking for