Changing BAM installation User ID

I have installed BAM in a user account. I need to change the userid on which BAM is installed as the userid will be disabled after few days.
I need to use a new UserID for BAM services.
How do i acheive this ???
Please help!!

Hi user478389. It looks like this post is pretty old, so you may have already solved your problem. However, you can use the adcSetSuperUser.exe program to do this.
-- Matt

Similar Messages

This advertised application will not be installed because it might be unsafe. Contact your administrator to change the installation user interface option of the package to basic.

Hi there,
I was wondering whether anyone could tell me which feature in Windows 7 produces this message "This advertised application will not be installed because it might be unsafe. Contact your administrator to change the installation user interface option of
the package to basic." and whether it can be turned off in Windows to prevent this message from appearing when installing certain programs that aren't WHQL certified. At first I thought it was the UAC control that generated this message but found out
that it wasn't and then thought it was the DEP control and found out that it wasn't this either. I'm only seem to be getting this message when installing FileDirector Component Service Version 3 on a few of our workstations which is an add-on that allows file
integration with Office and is part of FileDirector WinClient Version 3.
Your help would be much appreciated.
Many thanks,
RocknRollTim
P.S. I know of a way to bypass this message but would ideally not like to have the feature turned on and for the message not to be appear for non WHQL certified program installations in order to make non WHQL certified program installations in the future much
easier, more simpler and straightforward to carry out. I was redirected by a moderator off the Microsoft Community Forum.

Hi,
You can try following options to disable this prompt, but we don't recommend you to do so since this feature helps you to protect your computer.
Option 1: Run command as admin:
bcdedit -set loadoptions DDISABLE_INTEGRITY_CHECKS
bcdedit -set TESTSIGNING ON
Restart your computer to apply changes.
Option 2: Disable in GPO:
1.Type gpedit.msc in the Run dialog and press Enter.
2.In the Group Policy Editor, navigate to User Configuration → Administrative Templates → System → Driver Installation.
3.Double-click on Code signing for device drivers in the right-side pane as shown above.
4.In the windows that opens, choose Enabled. In the Options, choose Ignore as shown. Then click on the OK button to save the settings.
Restart your computer to apply changes.
Kate Li
TechNet Community Support
Unmarked as Answer based on OP's request.
https://social.technet.microsoft.com/Forums/en-US/35ab1279-c3a1-46be-9f7d-45e8606c1410/this-advertised-application-will-not-be-installed-because-it-might-be-unsafe-contact-your?forum=w7itproappcompat
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Here's a fix for "This item cannot be updated because it has been changed by another user or process"

https://gallery.technet.microsoft.com/System-Center-Service-fca7af29
A few months ago on the Technet Gallery, I submitted this custom control to be used on SCSM console forms. The purpose of the control is to eliminate the "This item cannot be updated because it has been changed by another user or process" error
message that we all have seen at least once (a day :) ).
The details are in the gallery description (along with installation instructions for existing forms and your own custom forms).
Here's a "short" description (nothing I ever post here is short :) ): This is a custom control that can be applied to an SCSM form like the Service Request form or Windows Computer form or your own custom form built with the authoring tool or Visual
Studio. When you click "OK" or "Apply" on the form, this control scans the form and Service Manager's database for any changes to the object you have open. If a property that _you_ have changed on the form was _also_ changed in the CMDB
(by a workflow or another user), this control will present a dialog box letting you know what happened. It will also let you choose which value to keep (yours, theirs, or the original value).
Just as importantly (and important in a greater percentage of cases), if a workflow changes a "background" property (like FirstAssignedDate) while you have the form open and you click OK, the control will detect the change and allow the form submission
to go through while keeping your changes and the FirstAssignedDate change that the workflow made. You won't get an error message or even a warning. And most importantly, you won't lose your changes.
That's where the "optimistic" part of the control's name comes from. It applies optimistic concurrency control to SCSM forms, while also providing an anti-collision interface for you to use so you no longer lose any of your changes.
Furthermore, this control will work on related items that are opened in memory; for example, the activities on a Service Request. So if you change an activity's title while the workflow engine sets it in progress, you won't get an error. The activity will
be in progress and will get your new title when you click OK or Apply.
Lastly, (and I admit this part is getting into the deep inner workings of console forms) if your form loads a sub projection at run time (to the root object) this control will detect the load and treat that sub projection as if it were apart of the original
form all along.
I've gotten a little feedback about this control, but I'd like to get more since it's a work in progress. So, I'm announcing it here on the forums. Please give it a try and let me know if you have any questions. I'll be happy to answer them here. Thanks,
folks!
Oh, and to answer the most common question right away: It's free. There is no paid version or anything like that. This is something I built for the SCSM community.

Great job!
Will definitely try it out.
Best regards,
Marcus

Problem in BAM installation

I have done all those pre requisites needed for BAM installation and while I am entering fields for 'datebase connect information' , (say sys password:, Hostname and port name, and service name) and pressing on next, the wizard goes through another window , something like 'Database user creation'
I have entered the password for the default users (orabam and orasagent) and after entering all those, upon clicking on next I am getting an error which says "install cannot connect to the database located at parameter #k2--121909.wipro.com:1521, please ensure that the hostname, port and service name are correct and that the database and its listner at this location are up and running"
where k2--121909 is the host name and wipro is the domain name and the service name that I gave was XE and my tnsnames.ora looks like this
# tnsnames.ora Network Configuration File: E:\OracleBAM\ClientForBAM\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = K2--121909.wipro.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = HOSTNAME)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = PLSExtProc)
I am getting this error despite doing everything correctly. I have installed my oracle client, all those prerequisites , XEDatabase etc and my listeners are up ..
So can anyone tell it to me why is it happening like this despite having everything correct... Kindly feel free to post a mail to [email protected]

Hi..
Pls check if you are able to connect to XE using Sqlplus.... also chk if ur able to execute the command tnsping XE successfully....
Thanks

Svrmgrl connect internal fails after changing oracle os user passwd on 8.06

Hello,
I've this problem.
I've installed oracle rdbms 8.0.6 on HP-UX 10.20.
I've choosen o.s. authentication system with password file.
In the password file I set the password of the os user oracle which owns installation.
In first time svrmgrl connect internal looks good.
But when I've changed oracle os user password, and i retry to do connect internal
I receive the following message:
SVRMGR> connect internal;
Password:
Password:
ORA-01031: insufficient privileges
I've tried to reset the password to the old one, but it's unuseful
Could someone help me?

In the password file I set the password of the os
user oracle which owns installation.The Password for the password file is supposed to be the SYS password and not OS User oracle which owns installation.
I do not think the Oracle OS user password change is the problem. When you alter SYS password using the alter user command, it should change the password file automatically.
Try
SVRMGR> connect sys/sys_password as see whether it works. If it does not, then check other issues.

[svn:bz-trunk] 15533: Back out some local changes to tomcat-users. xml and tomcat-users.xml. install I inadvertently checked in when upgrading ActiveMQ on BlazeDS/trunk .

Revision: 15533
Revision: 15533
Author:   [email protected]
Date:     2010-04-17 04:20:11 -0700 (Sat, 17 Apr 2010)
Log Message:
Back out some local changes to tomcat-users.xml and tomcat-users.xml.install I inadvertently checked in when upgrading ActiveMQ on BlazeDS/trunk.
Modified Paths:
    blazeds/trunk/servers/apache-tomcat-6.0.14/conf/tomcat-users.xml
    blazeds/trunk/servers/apache-tomcat-6.0.14/conf/tomcat-users.xml.install

i will not read all that!!!! Format it! Lots of useless information commented.
java.net.SocketException: java.net.ConnectException: Connection timed out: connect
at com.mysql.jdbc.StandardSocketFactory.connect(StandardSocketFactory.java:156)
Tells me you have a connection error on Mysql. Quick search show me this:
<Resource name="jdbc/passport" auth="Container"
type="javax.sql.DataSource" driverClassName="com.mysql.jdbc.Driver"
url="jdbc:mysql://258.1.54.134:3306/xmnext_passport"
username="dda" password="zhoussda" maxActive="20" maxIdle="10"
maxWait="-1"/>
Can you connect to the server using thos setting with a mysql client in the server?

Does Firefox change the installation date in control panel when they upgrade?

I installed Mozilla Firefox in early September. 6 weeks later I noticed the installation date for Firefox in control panel had changed from September to October (appeared as if it had been uninstalled and reinstalled). I uninstalled it, and reinstalled it, and I noted the date of installation, October 18. I kept an eye on it. November 5, I checked the control panel, I noted the installation date had changed again, to November 1. Now my dates may be off a day, but is it normal for Firefox to change the installation date when upgrading, and even more disturbing, is it possible to do it without the user knowing it's being done? And remotely?

Each time you update any program, you install it. The installation date in Control Panel will therefore update accordingly. This happens when the installer runs on your system: there's no remote interference involved.
By default, Firefox updates automatically. The setting is found under Options - Advanced - Update. If you click the Show Update History button there, you'll no doubt find Firefox was updated on November 1st.
* [[Advanced settings for accessibility, browsing, system defaults, network, updates, and encryption]]

HT1338 how can i change an installer password? My Apple pw dosen't seem to work Thanks

how can i change an installer password? My Apple pw dosen't seem to work> Thanks

Hi..
I think you mean your admin password.
For Lion v10.7 > OS X Lion: Apple ID can be used to reset your user account password
edited by: cs

Change The Way Users Log On Or Off

So I am trying to change the way users log on or off, and so I went onto User Accounts, clicked it, and it shows an error. I need to uninstall vrlogon.dll, somehow. I have searched through the internet, and I did all the steps. However, when I rebooted my laptop, it did not work. I was going to the Welcome Screen. If you can, please help.

Hello,
Which version of Microsoft Windows are you running? I do not have a VRLOGON.DLL file on my installation of Microsoft Windows 7 Ultimate Edition x64.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Multiple BAM installations on the same machine?

Hi guys,
I have a customer with the following requirement:
"We have installed BAM 10.1.3.3 with EL and upgraded to 10.1.3.4. It is currently using a remote database 10.2.0.3 in our test envt. We want to use the same Windows server for monitoring our Development enviroment also using the Dev database. Is it feasible or will it corrupt the IIS of the windows machine already running BAM 10.1.3.4. Please provide your recommendations on this, whether to have separate windows servers or we can have multiple BAM installations on same server."
Any ideas on this?
Thanks in advance,
Catalin
Oracle Support Services

Multiple BAM 10g installations on the same box is not supported.

How do I change the itunes user name on my iphone?

How do I change the itunes user name on my iphone? When I attempt to purchase an app or update the existing ones, the previous owner of this iphone has their information displayed and asks for the password as their user name is automatically prompted?

The apps are tied to the account from which they were purchased. If the apps were purchased from the previous owners account, then they would have to be updated from that account. you should not have these apps anyway. You need to buy your own.
Read the manual. it will tell you how to sign into your account to buy apps.
iPhone User Guide (For iOS 4.2 and 4.3 Software)
I would suggest restoring as new.

How can I change the installation path of JWS?

I have to install the JRE 1.4.0_01 in silent mode on Windows XP. For the JRE I can set the installation path in the corresponding dialog and record it in an *.iss file. When starting the silent installation the JRE is correctly installed into this path but the Java Webstart installation procedure doesn't care about this path and installs JWS in 'D:\Programme\Java Web Start'.
How can I change the installation path for JWS?
J�rg

Verify Free Disk Space. Assuming you are installing the OS to the C: drive.

Can't update or purchase apps because old user name (MobileMe) comes up automatically and can't change to new user I'd

I can't update or purchase apps after changing my iTunes user I'd . Old (MobileMe) user id comes up automatically and doesn't allow change. How do I take care of this? I've even deleted MobileMe from iPad

Deltacoman wrote:
It won't recognize the password I used when buying the apps.
Hmmm...
That should work. Go here to determine if there is perhaps a third Apple ID involved! If not, perhaps your memory isn't what is used to be. Change the password.
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again.

Changed my Apple User Name (email address) and home sharing no longer works?, Changed my Apple User Name (email address) and home sharing no longer works?

I've had the 2nd generation Apple TV since this past October when it was released and it has worked fine until I recently changed my Apple User Name (email address). After changing my user name my Apple TV and iPhone 4 no longer find my shared network. Home sharing is enabled on all devices, including my Sony Vaio Laptop, iPhone4, and Apple TV 2nd generation. Everything else has remained constant, including service provider, router, modem, and internet security (Trend Micro). Also, my library is on a networked hard drive, which didnt seem to make a difference before, but I figured I'd mention it. Any thoughts?
Thanks.

Winston,
Thank you for the information. He confirmed that the ID and password are the same on every device. This only started happending when he changed his User Name with Apple.
--Itunes is running on a Windows Vista Machine (Sony Vaio)
--He has an Apple TV (2nd Gen)
--He has an iPhone 4
Can you tell me more about the technologies that apple uses to make "homesharing" work? Do you think he may need to remove then re-install Bonjour?

When i double click on Mac HD the view has changed and my user name is no longer listed on the left. How can I reset this

When i double click on Mac HD the view has changed and my user name is no longer listed on the left. How can I reset this?

Do a factory reset .. nothing will be deleted from your backups and you will be able to get access to them again.
The Factory Reset Gen1-4.
Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.

Changing BAM installation User ID

Similar Messages

Maybe you are looking for