Changing banks for Atmosphere or Trilogy via Controller????

Anybody know how to change the banks via MIDI for Trilogy or Atmosphere? I've built a template to control all the parameters they listed the MIDI messaging for in the manual, but there wasn't anything for paging through the main bank at the top. Anybody have this working for either instrument?

Eric, founder of Spectrasonics, frequents the northernsounds forums. I recommend posting there, as you may get an answer direct from the source.
http://www.northernsounds.com/forum/forumdisplay.php?f=2
Let us know what you find out!
edit: what the heck, I'll post over there for you and let you know what I find out.
edit2: here is the link to the post I made at northernsounds, feel free to add anything you'd like.
http://www.northernsounds.com/forum/showthread.php?t=44383
Message was edited by: Jonathan Timpe (because he cant stop adding to his post

Similar Messages

Change Bank Account on Printed Checks via F110

Hello Gurus-
I have a requirement to change the account number on the printed checks which is done by the House Bank configuration. I was wondering if there was anything else I should consider or keep in mind when making changes to accounts numbers on printed checks? Should there be any changes to check lots for example?
Thanks!

Option 1.
Simple solution would be.
if you are not going to use old bank account and want to use old cash gl account for new bank account for checks, you chage old bank account to this account to new account.Then you are all set. Dont have to create any check lots and no other config. changes.
This had impact in accounting while reconciling checks(check clearing) that created with old account if you change the GL account also while changing the bank cash gl account if you change cash gl as well.
You dont have a problem if you dont change cash gl account.
Option 2.
You have to create a new account ID in the same house bank, use this new account id in Bank account determination(here change to new account id from old account ID), avalible amounts and create check lot for the new account ID.
Option 3.
If you dont like to messup with the existing house bank, you can have a new house bank and account, in this case you have to create ranking orders, bank determination, avalible amounts and create check lot for the new house bank and account id.
* Make sure to take out the old house bank and account id from bank account determination for check payments. Otherwise if any invoice created for the old house bank will get paid with the automated payment run.
all can be done in the transactions - FBZP and FCHI

F110 - Mass change house bank for one time vendor

Hello,
Is it possible to make mass changes for payment program for one-time vendors? I would like to change bank account from where do I want to pay something to one-time vendor. As far as I know, it isn't possible to change it that way, it is possible only one per one.
Does anyone have Idea how to resolve this issue?
Thank you in advance!

I can do it but one per one in payment proposal. I can't do it mass. The issue is that I have huge number of one time vendor payments per day and some of them should be paid in one house bank and some of them in some other house bank.
I tried to change it with FBL1N but I couldn't do it.

OSB & WLST: changing operational settings for a proxy service via WLST

Hi all,
we are trying to change the operational settings for a proxy service via WLST.
In details we would like to change the "Logs" level (Monitoring section).
We have a lot of deployed services and our 'deployer people' need an automatic way (via WLST for example) for doing that instead of using the OSB console.
Thanks in advance
ferp

Hi,
OSB is the Oracle Service Bus. Oracle Service Bus is a configuration-based, policy-driven enterprise service bus.
The OSB is deployed into an Oracle WebLogic Server instance.
OSB uses also WLST functionality provided by WebLogic Server.
Best regards
ferp

HT3702 How do you contact iTunes to recover money they charged my bank account with out my authorization. Invalid security code problem. Could not fix card issue.Changed bank card information and I got charged for tiny zoo bucks $24.99. I Got no zoo bucks

Changed bank card. Got charged $24.99 from iTunes for a prior purchase that would not go thru due to invalid security code. When put new information on iTunes payment . iTunes charged my account without me confirming order and I didn't even receive the zoo buck 50% sale special. They just took my money . Now I can't connect to iTunes Store because they are fixing problems. What can I do to get my money . Can't even reach tiny zoo who gets the money. iTunes should of sent a confirmation request when new card was submitted before taking money.

Thanks, but I've been on the phone with AppleCare US (where I am and live) and AppleCare UK. They continue bouncing me back and forth without helping resolve the problem.
Perhaps someones knows how to further escalate the issue at Apple?

Since installing the lastest soft wear I have been unable to log into internet banking for nab on the app and via safari? Anyone have an idea why?

Since installing the lastest soft wear I have been unable to log into internet banking for nab on the app and via safari? Anyone have an idea why?m

I experience similar problem with working in internet. Also use Safari.

Cache Settings Utility for via controller?

Hi
In one of the books that came with my mb is a manual about the promise raid controller (Serial ATA Raid, Serial ATA Quick Users Guide), anyway, on page 18 of this book they talk about a utility where you can enable and disable the cache and write through/back of the attached SATA drives. Now for my question, I do not use the promise controller, I use the via controller, so is there anything like the promise utility for the via controller?

Quote
Originally posted by Jocko
Have alook in START, PROGRAMS, VIA, it should be there.
jocko
There is the raid_tool.exe program, but as Cozman says there are no options to to enable or disable the cache in that program.

Sap Banking - Display change documents for accounts

Hello,
Can anybody help me? I need to write a report that shows all the change documents for a range of accounts, and I don't know how to retrieve this info. I know that there's a table BCA_CN_LINK that storages what object type was modified and by whom. But I don't know in which table the old and new data is stored for each change document.
Any idea is welcome!!!
Thanks a lot.
Regards, Marcela Sanchez

You can see the change documents for a single account vía transaction BCA_CN_ACCT_03 (Account Management -> Account -> Account Master Data -> Display Account) and then click the ChangeDocuments Account pushbutton

How do I turn on my wireless keyboard and make it 'discoverable'? I got a message that the batteries were low, so I changed them for new ones and now the keyboard doesn't work.

I got a message saying that the batteries were low, so changed them for new ones and now the keyboard cannot be 'found'. There seems to be no way to turn it on and make it 'discoverable' to the system. At the moment I'm typing this on a spare keyboard plugged into the back of my mac via a USB. Please help!

Have you checked to make sure the batteries are inserted the correct way? Have you tried to turn it on by pushing the right upper (round) edge of the keyboard - if you do that, do you see a tiny little green light? Since you have a wired keyboard, can you get to the Bluetooth setup/preference pane so you can manually try to sync the keyboard?
PS - posting duplicate posts is not helpful - it makes things too confusing, so I've asked the hosts to remove your other (identical) post.

How to run multiple CodedUI Ordered Tests over multiple Test Agents for parallel execution using Test Controller

we are using VS 2013, I need to run multiple Coded UI Ordered Tests in parallel on different agents.
My requirement :
Example: I have 40 Coded UI Test scripts in single solution/project. i want to run in different OS environments(example 5 OS ). I have created 5 Ordered tests with the same 40 test cases.
I have one Controller machine and 5 test agent machines. Now I want my tests to be distributed in a way that every agent gets 1 Ordered test to execute.
Machine_C = Controller (Controls Machine_1,2,3,4,5)
Machine_1 = Test Agent 1 (Should execute Ordered Test 1 (ex: OS - WIN 7) )
Machine_2 = Test Agent 2 (Should execute Ordered Test 2 (ex:
OS - WIN 8) )
Machine_3 = Test Agent 3 (Should execute Ordered Test 3
(ex: OS - WIN 2008 server) )
Machine_4 = Test Agent 4 (Should execute Ordered Test 4 (ex:
OS - WIN 2012 server) )
Machine_5 = Test Agent 5 (Should execute Ordered Test 5 (ex:
OS - WIN 2003 server) )
I have changed the “MinimumTestsPerAgent” app setting value
as '1' in controller’s configuration file (QTController.exe.config).
When I run the Ordered tests from the test explorer all Test agent running with each Ordered test and showing the status as running. but with in the 5 Test Agents only 2 Agents executing the test cases remaining all 3 agents not executing the test cases but
status showing as 'running' still for long time (exp: More then 3 hr) after that all so its not responding.
I need to know how I can configure my controller or how I can tell it to execute these tests in parallel on different test agents. This will help me reducing the script execution time.
I am not sure what steps I am missing.
It will be of great help if someone can guide me how this can be achieved.
-- > One more thing Can I Run one Coded UI Ordered Test on One Specific Test Agent?
ex: Need to run ordered Test 1 in Win 7 OS (Test Agent 1) only.
Thanks in Advance.

Hi Divakar,
Thank you for posting in MSDN forum.
As far as I know, we cannot specify coded UI ordered test run on specific test agent. And it is mainly that test controller determine which coded UI ordered test assign to which test agent.
Generally, I know that if we want to run multiple CodedUI Ordered Tests over multiple Test Agents for parallel execution using Test Controller.
We will need to change the MinimumTestsPerAgent property to 1 in the test controller configuration file (QTControllerConfig.exe.config) as you said.
And then we will need to change the bucketSize number of tests/number of machines in the test settings.
For more information about how to set this bucketSize value, please refer the following blog.
http://blogs.msdn.com/b/aseemb/archive/2010/08/11/how-to-run-automated-tests-on-different-machines-in-parallel.aspx
You can refer this Jack's suggestion to run your coded UI ordered test in lab Environment or load test.
https://social.msdn.microsoft.com/Forums/vstudio/en-US/661e73da-5a08-4c9b-8e5a-fc08c5962783/run-different-codedui-tests-simultaneously-on-different-test-agents-from-a-single-test-controller?forum=vstest
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Change logs for Z table.

Hi All,
I am trying to fetch the old value and new value for the z table field.Change log is activated for the Z table. but i dont know how to fetch the change logs.
SCU3 is the standard transaction to see the change logs for all the tables.
Is there any table where the change logs values are maintained?
Does anyone know how to get the change log value?
Thanks in advance.
Regards,
Amruta.

Hello,
If for a specific set of tables no change documents are triggered by SAP you can always setup your own Change Document Object with transaction SCDO.
Of course you need to be careful with this transactions (how big is the table data, how many changes, etc...).
Table logging is something else, they are stored in table DBTABLOG and can be analysed via SCU3.
For table logging you need extra system parameters to be set, they are explained in SAP Note:
Note 1916 - Logging table changes in R/3
Pay attention with table logging because a lot of tables are logged in DBTABLOG once you activate the parameter, this can have a major impact on performance.
To have an idea what other tables will be logged, check tcode SE16 on table DD09L and put an 'X' in field PROTOKOLL, result will be thousands of tables.
In your specific scenario I think it is best you go for the change documents with SCDO.
Wim Van den Wyngaert

Change logs for tcode WE20 and MN04

Hi Gurus,
Good day.
Please help. does WE20 and MN04 generates change logs? If yes, please advice on how to check change logs of both transactions.
Thanks in advance.

I have never seen change logs for WE20.
MN04 is creation of conditions. as conditions usually stored in own tables, the change history needs to be activated for these tables via SE11 first.

Change Rules for Line item

Hi,
I have customized the change rules for Line item.
Still the system not allowing to make changes to that particular field? Can any one tell me, whats the reason for the same.
Following Field is made as changeable for the line item.
BSEG-VBUND Trading partner.
The above field is available in More data Tab or additional data tab while making entry or display of document.
Thanks,
Lalatendu

Hi,
That i know, but trading partner was not entered in the GL Master data. Infact some one wrongly entered Trading partner in Customer master and during bank posting system automatically picked Trading partner.
When thye r trying to clear open items for that GL account , because of that assignment system is not allowing to clear those line item.
If i can remove that trading partner from document, my problem will be solved.
Can any one guide me..or if u need more info please let me know.
Thanks,
Lalatendu

IDOC trigger using Z change pointers for standard SAP table

For IDOC trigger, is using custom change pointers on standard SAP master data tables, a good idea? A seasoned abaper told me "it will mess with the standard" and further told to go with scheduled job.
So, for example, say that my data for table T001K is updated via transports in PRD and I need to transfer this updated data via IDOC to an external system. Since there is no standard message type for this data, I will create a new one. Further, I will create a new change pointer for table T001K (it already has six fields with their data elements activated for Change Documents). Then I link the message type and the new change pointer. And so on an so forth. I have followed the procedure given here:SAP Tips: A to Z of Custom Change Pointer
Now, the question is, will this be a good idea to capture data and trigger IDOC? Or a batch program with calls to standard FM to read CDHRD/CDPOS be a more suitable option.
I need to know if a near instantaneous data transfer (and an effecient one as far as the system performance and reliability is concerned) can be acheived. If there is any other way of doing this, I am not aware of it!
Any one has any input/experience on this?

Hi Viktor,
I think the batch program approach would be a good solution as the by this way you are taking matter into your own hands rather giving control to the SAP framework because you may have to test out the other approach as to how the standard SAP framework is behaving for custom change pointers.
Thanks,
Ravi

Can't make a selection of my pathes even if i have set a program change number for each one.Why is that happening?

Hi everybody!
I send program change messages from my midi controller and the messages are accepted by mainstage 3 as shown in the midi message window,but i can't make a selection of my pathes even if i have set a program change number for each patch.Why is that happening?
I use a novation SL mki or a KORG Triton Le or a m-audio axiom 49 as midi controllers.The program change messages are transmitted by all the devices i mentioned above and shown as received in the midi messages window of mainstage 3.
Has anyone the same experience?

Hi
Have you selected the correct device as the Program Change device and MIDI channel in the Concert Inspector?
CCT

Changing banks for Atmosphere or Trilogy via Controller????

Similar Messages

Maybe you are looking for