Changing between buttons when a widget is open

Hello everyone I am wrestling with the HTML5 output and the glossary widget...I had posted this problem last week here: http://forums.adobe.com/message/5298569. Shekhar from Adobe helped solve the problem (thank you)but not 100% optimally. So, I will ask a question that may bring me to satisfaction and closure
I want to open a glossary widget with an "open" button. When the widget is open, the open button will change to a "close" button. Basically, the controls will be in the same place, but the open widget will toggle the buttons. Is there a way to do this without too much programming savvy...? Again, I need HMTL5 output because about half of my students are running the courses on ipad or other handhelds...
Thank you,
Daniel

I suggest you go immediately to scenario 4, because that is what you want really.
For the moment blog is posted under blog.lilybiri.com. The main website is still not available (protected by password), have too much work for the moment and want to have at least some articles transferred. I'm very annoyed with Posthaven that doesn't allow any comments for the moment, nor analytics, nor subscribing. But it was the only way to convert so many articles (outdated or not) in a quick way and not to lose them.
Lilybiri

Similar Messages

HT4428 My 128 Gb iPad cannot do airplay mirroring with Apple TV 3. It only airplays with screen off (like iPad 1), and it can only do airplay with apps which have the airplay button. No airplay button when sliding the bottom opened apps to the right.

My 128 Gb iPad cannot do airplay mirroring with Apple TV 3. It only airplays with screen off (like iPad 1), and it can only do airplay with apps which have the airplay button. No airplay button when sliding the bottom opened apps to the right! Note : This problem persists after HDMI cable has been changed, and Apple TV was reset. My another iPad 4 64Gb also on the same most updated ISO has no problem.

I restarted the iPad, it is okay now! I think it is because I have been using the smart cover for too long, without shutting down the iPad completely! It just works fine with the airplay signal appearing again after restarting the iPad.

Change Image button when selected

Hello,
I want to change a button picture when the button is selected.
Is this posible?
And how can I do this?
I have here a picture how I want it:
So what I want is when de 5th buton is selected there will be another image visible.
The first image he is dark and have his eyes closed en when he is selected the picture is lighter en his eyes are open.
I hope someone can help me out.
Thanks!

You can use autoactivate to go to a different menu that has the different image for that button. You would need to create multiple menus.
Mouseover won't autoactivate, so doesn't work on a computer the way you'd like.

How do I disable the "Delete Proflile" and "Rename Profile" buttons when the profile manager opens at startup?

I have multiple Firefox profiles for the different people that use my computer, and I would hate for someone to accidentally delete my profile when going online. Is there anyway I can disable that button when Firefox starts, and only have it work when I open the profile manager?
I was originally just gonna give everyone their own Windows login, but it's easier for me to just do it this way. Help is appreciated.

If there is already a Firefox instance open that uses a specific profile then you only open a new window in that instance it you click another Firefox shortcut.
Be aware that if no Firefox instance is open and you click a link in anther program (Windows Explorer or email) and Firefox is the default browser then Firefox will use the profile that is selected in the profile manger as the currently selected profile.

HT3819 how do I share movies/music between my computers. I have opened shared on both computers and both are on, but i am not able to drag anything from one to the other. Does anyone know where the settings button is on the bottom of the itunes screen?

how do I share movies/music between my computers. I have opened shared on both computers and both are on, but i am not able to drag anything from one to the other. Does anyone know where the settings button is on the bottom of the itunes screen?

Oops, I forgot a step between 7 and 8 ... before syncing the iPhone I need to explicitly send the document back to iTunes on the iPhone, or the changes won't come over at all ...
and then one more thing ... Numbers on iOS does NOT recognize a number of key features of the OSX app, such as conditional formatting ... so after editing my document on iOS and syncing it back to OSX on my Mac, all of those settings are lost (no more conditional formatting, have to do it all over again)
What am I doing wrong ?

Before every time I use to open a new tab it comes as top site. Now not anymore and instead is an automatically website calle Only Search. I went to Safari preference I change everything and when I quit Safari all the changes are gone.

Every time I used to open a new tab it comes as top site. Now not anymore , instead it open in a website called Only Search, I went to safari preferences and made all changes but after I quit Safari and open again all changes are gone. I can not change anything and new tab comes by it self with other website.

There is no need to download anything to solve this problem.
You may have installed the "Downlite" or "VSearch" ad-injection malware. Follow the instructions on this Apple Support page to remove it.
Back up all data before making any changes.
Besides the files listed in the support article, you may also need to remove this item in the same way:
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, then you may have one of the other kinds of adware covered by the support article. Follow the rest of the instructions in the article.
The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This malware is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates
if it's not already checked.

I set my passcode in arabic then I changed the language to English, when I wanted to open my ipad later there was no arabic letters to enter my arabic passcode..and I am not able to use my Ipad again please let me know what to do

I set my passcode in Arabic then I changed the language to English, when I wanted to open my ipad later there was no Arabic letters to enter my Arabic passcode..and I am not able to use my Ipad again please advice me what to do

Hello Shaholeh87,
Do you see a Globe icon on left hand side of your Spacebar if yes try pressing that and see if you get an option of changing the keboard language (this will work if you have Multiple language set on your iPhone from Settings>General>Keyboard>International Keyboards and added a keyboard in Arabic Language before )
Or you can get your iPhone in Recovery Mode and Restore it to Factory settings but you will lose all your current Data that you have on your iPhone.
To Restore your iPhone by taking it in Recovery Mode you can follow the below steps :
Follow the process mentioned below step by step to get your iPod Touch/iPhone/iPad working.
Make sure you have Latest Version of iTunes (11.1.3) Downloaded and Installed on your Computer, if not then you can download the latest version of iTunes from the Link below.
http://www.apple.com/itunes/download/
Now once you have the Updated version of iTunes installed on your computer follow the below steps to get your iPod Touch/iPhone/iPad in Recovery Mode and Then restore it to factory settings
Open iTunes Application on your computer and then start the process step by step
1>Disconnect your device from the computer (if connected). The process won’t work if you start with the iPod Touch/iPhone/iPad connected to the computer. Leave the cable connected to the iPod Touch/iPhone/iPad, as you will be reconnecting the iPod Touch/iPhone/iPad to the Computer later in the process.
2>Power down your device. Turn off your device by holding down the Power button ( On Top right corner of iPod). When the power slider appears, slide it to the right. Wait for your device to comepletely shut down before continuing.
3>Press and hold the Home button (Home Button is located at bottom of your iPod Touch/iPhone/iPad screen/display). With the Home button held connect the device to your computer with the USB cable. When reconnected, your device should turn on.
(If the low battery screen appears, charge your device for a few minutes and try the process again.)
4>Continue holding the Home button. After a few moments, you will see the "Connect to iTunes" screen on your device. This screen is a picture of an arrow pointing from a USB cable to the iTunes logo. When you see the screen you can release the Home button.
5>iTunes will display a message stating that a device in recovery mode has been connected. From there you can proceed to restore your iOS device. Once you see this message click on OK and then click on Restore
Once you click on Restore iTunes will download the Latest available version of iPod Touch/iPhone/iPad software (ipsw file) in your computer and after the download is completed the same will be restored in your iPod Touch/iPhone/iPad. You will see the Download process and Restore process on top of your iTunes screen. Once the restore is completed your iPod Touch/iPhone/iPad will automatically restart and you will see a message that iPod Touch/iPhone/iPad has been Restored and will connect after restart.
Now you will have to follow some steps on your iPod Touch/iPhone/iPad to Customize your Device for First Use.
Hope this process will help you

Get Info "Change All" button doesn't keep the proper "Open With" app

I have a small but annoying problem that appears in Leopard 10.5.2 (been there since original 10.5.0 install) that I have tried to troubleshoot but can't solve.
The problem is:
-With some of my file types, the wrong "Open With" application is displayed when I view a Get Info for that file type. So to fix this, I open a Get Info window on one of those types of files, and choose the PROPER default application in the "Open With" slot. This works, and then the new proper application name now shows in that slot. So then I click the "Change All" button and apply to all files of that file type. I receive the warning that I will be changing ALL files of that type. I choose "continue" because that is what I desire.
However, once I do that, (click Change All, then Continue button), the old, wrong application name jumps back the Open With slot! So the new, correct application choice doesn't "stick".
Oddly enough, it sort of DOES work, because if I then re-click in the Open With slot, although the old, the wrong application is back listed again, if I look up above that name, then my actual desired application is listed in a list, and it has the word (Default) beside it.
So if I do actually now double click any file of that type, then the proper application DOES launch and open the file.
But why does the Get Info window still display the wrong, non-default application in Open With? And furthermore, this causes all file types of that kind, to display the WRONG icon in any Finder window. They of course display, the icon of what is in the Open With slot list.
I am having this problem only with two file types and apps. (Cubase and Pro Tools---DAW audio apps). All of my Cubase files display a Pro Tools icon, and show as Open With: "Pro Tools" when of course it should display Open With: Cubase. As stated in the Open With list, Cubase is indeed there among other programs and it has the word (Default) beside it. So it sort of works when launching files. But I still cannot get Cubase to "stick" and stay in Open With after Change All!
Can anyone offer any tips on what might cause this and what fix is needed?
Thanks so much in advance!
Wade

Well, I tried rebuilding the Launch services with the command listed but still no luck. After having no luck with that and deleting caches, etc....I also, went to my home (user) directory and in Preferences, I deleted the com.apple.launchservices.plist file. I restarted and checked and still the same result.
Also, I want to emphasize again that the file type I am discussing DOES actually launch with the correct application. (Cubase files in my example).
But it is just annoying that ALL of my Cubase files display the Pro Tools application icon, and in Get Info they are listed to open with Pro Tools. But they actually do launch Cubase if double clicked.
And one other VITAL note....if I open Get Info for one of these files, and change the Open With from Pro Tools to Cubase....then that choice DOES "stick" and retain. (if I "don't" also click Change All)
It's only when I click "Change All" that it DOESN'T stick and the list selection jumps back to Pro Tools. I hope that may offer some clarity.
Thanks for the tips but I am still back at square one.
Wade

Why does the Right-click - "t" delete a bookmark on the bookmark toolbar, when Right-click - "t" opens a new tab elsewhere. The bookmark toolbar use Right-click - "w" to open in a new tab. Please change this to "t" to...

Why does the Right-click -> "t" delete a bookmark on the bookmark toolbar, when Right-click -> "t" opens a new tab elsewhere in Firefox. The bookmark toolbar use Right-click -> "w" to open in a new tab. Please change this to "t" to... I keep deleting all my bookmark because you don't make the commands consistent!

If you have accidentally removed bookmarks then use "Organize > Undo" in the bookmarks manager (Bookmarks > Organize Bookmarks) to get them back.<br />
The Organize button is the first of the three buttons on the toolbar in the Library (Bookmarks Manager).<br />
That only works if you haven't closed Firefox.
[https://bugzilla.mozilla.org/show_bug.cgi?id=301888 Bug 301888] – Bookmarks cut instead of opened in new tab from Bookmarks Toolbar Folder
(please do not comment in bug reports; you can vote instead)

HT1338 i am sick and tired of mac's safari and firefox window popping up when i want to open my mail. what the **** is going on, because no matter where i look i cannot see any 'download' "thing/button" to do so. STUPID, STUPID STUPID!

i am sick and tired of mac's safari and firefox window popping up when i want to open my mail. what the **** is going on, because no matter where i look i cannot see any 'download' "thing/button" to do so. STUPID, STUPID STUPID!
How can i get rid of this iidiotic pop-up. allple is changing for the worst. you have to buy a new macpro in order to upgrade to a higher system, sounds like obamacare.

You have probably clicked on a mailto: web link which directs links to send e-mail messages to wherever the webmaster chooses. Go to the View menu -> Show Statusbar if it available, and then make sure the bottom of your screen is visible. When you hover over a link, if it says: mailto: it will open in your default e-mail reading application set by your browser or your e-mail program preferences.
Apple menu -> System Preferences -> Software Update lets you change how often you see the software update window.
G5s are not Intels.

How do I change between iPhoto Libraries when I am importing pics to another website?

When I import pics to my website I click on Import photos and the standard apple screen (Firefox Edit in menu bar) comes up so I click on Pictures, then iPhoto, then Events and choose the individual photos, but only the one library shows there. I do know how to change between the libraries when opening the iphoto library by using the options tab, but that does not work in this instance?
ilife 11, OSX 10.6.8.

Correct - that is not how you access your photos
You use the media browser in the lower left hand corner of the upload window under media ==> photos ==> iPhoto
See this user tip for complete details on accessing your photos correctly
LN

Problem with accordion widget flashing open and shut when page loads

why is it that my accordion widget flashes open and shut when the page is loading (see http://vincentballmusewebsite2013test.businesscatalyst.com/digital-illustration.html#.UVDr Ehx7JyII) have tried everything to solve this, and Adobes customer service is terrible they don't get back to you when they say they will.
Please help me someone,
Thanks

Thank you Zak for your help, I spent 5 hours going round in circles trying to fix that problem and that's all I needed to hear, a bit of honesty and integrity.and yes, Adobes terrible customer service has still not got back to after promising 2 level technical support to contact me last Monday, I wish there'd keep their promise
Pamela, did you try my test website or my own website and if so my own has now no accordion widget on it and my test website may need you to try loading a few times to see if it really works or not, sometimes it does actually work even on a pc but most times not.
thanks for you help too.

I have both Photoshop 4 and Photoshop 6 on my computer. When I am in Bridge and want to open an image by double clicking, it automatically opens in 6. I see, when I go to "open with" 6 is listed as "default" How can I change the "double click" defult to o

I have both Photoshop 4 and Photoshop 6 on my computer. When I am in Bridge and want to open an image by double clicking, it automatically opens in 6. I see, when I go to "open with" 6 is listed as "default" How can I change the default to open an image with a double click in 4?

You can associate files from the Bridge level and the Desktop level.
In Bridge CS4, go to Preferences > File Type Associations and change it to Photoshop CS4 for the file types you want.
If you want to open files from the Windows Desktop in CS4, these are the instructions:
Do this from the Windows Desktop:
If you want your image file to open in Photoshop and it doesn't, right click on it and choose
Open with > Choose default program… select Photoshop CS4 or CS6 and checkmark "always use the selected program to open this type of file".

Boolean button changes color briefly when pressed

Hi, I am using Boolean button as a toggle, so I only want text changes when it is pressed with no changes to button appearance.
I am able to change the color for On in properties to match the Off color (I am using the Silver palette so normally On is yellow), however when the boolean button is changes to On, there's a brief changes of color still. Is there any way I can get rid of it?
In fact some of my buttons blink black while others blink yellow. I have no idea where that is set.
Thak you very much.
Solved!
Go to Solution.

There are 4 colors for booleans ON and OFF plus going from ON to OFF and going from OFF to ON
You only see the transition color when you have the Mech latching set to "latch when released"
Set it to "Latch when pressed" and you will not see the transition colors
You can set all 4 colors by using the Colors [4] Property
Colors [4] Property
Short Name: Colors[4]
Requires: Base Development System
Class: Boolean Properties
To Use: Create a property.
Array of up to 4 (Foreground Color, Background Color) pairs, where Foreground Color is the foreground color of the Boolean control and Background Color is the background color of the Boolean control. Color pairs include False, True, True to False, and False to True.
You can set the color of the front panel object by wiring a hexadecimal number with the form RRGGBB or by wiring the color box constant to the property.
This property is similar to the Colors option on the Appearance page of the Boolean Properties dialog box.
If the Boolean control has four (Foreground Color, Background Color) pairs for the four states, this property always returns an array of four (Foreground Color, Background Color) pairs when reading. When writing, you can pass in an array of length 1, 2 or 4. If you pass in only one element, this property uses that element value for all four states. If you pass in two elements, this property uses the first element value for the False and True to False states. Similarly, this property uses the second element for the True and False to True states.
If the Boolean control has only one (Foreground Color, Background Color) pair for all four states, this property returns an array of one (Foreground Color, Background Color) pair when reading, and uses the first array element when writing. You cannot change a Boolean control with one (Foreground Color, Background Color) pair to a Boolean control with multiple (Foreground Color, Background Color) pairs.
This property only uses the True to False and False to True states when you set the Boolean control to latch or switch when released. You can get and set these (Foreground Color, Background Color) pairs even if you do not have the control set to latch or switch when released; they just are not used.
Because this property does not change the data of the Boolean control, you can set it at any time.
You can use the this property for Boolean controls on the Classic, Express, Modern, and Silver palettes. You cannot use this property for Boolean controls on the System palette.
Omar

I recently purchased an external hard drive to back up my iMovies. When I try to open the movies on the backup I get a message "you may not have permission to modify that folder" How do I change permissions on the backup?

I recently purchased an external hard drive to back up my iMovies. When I try to open the movies on the backup I get a message "you may not have permission to modify that folder" How do I change permissions on the backup?

Hi
One Must NEVER move or alter any folders named
• iMovie Event's - or -
• iMovie Projects - or - alike
on DESKTOP/FINDER - Ever ! - ONLY Within the iMovie Program ! else all connections are broken and hard to impossibly to mend !
but rather do as described here under
Moving Event's and Project's
Connection - Either connect one Mac in Target mode to the other via FireWire. Or use an external hard disk !
(Target-Mode - Start one Mac e.g. laptop - BUT keep T-key down during full up-start - Now a FW-symbol is jumping around the screen and it will work as an external hard disk when connected to the other Mac)
A. The External Hard Disk - MUST BE - Mac OS Extended (hfs) formatted to work for Video. UNIX/DOS/FAT32/Mac OS Exchange works for most other things but not for Video whatever program is used (iMovie or FinalCut)
B. Should be a FireWire one as USB/USB2 performs badly to me and especially when filling up
C. Do never Move or Alter any folder named
• iMovie Event's - or -
• iMovie Project's
on DeskTop/Finder - as this will result in iMovie losing connections to them and repair can be anything from hard to impossibly
D. Moving and Copying must be done within iMovie application and Events to Events - and - Project's to Project's.
E. Moving Project's to Event's - Do not work for me - I have to export project as a QuickTime movie then Import this into Events.
Event's window can show two faces
Like this
or like this
from one hard disk Event - You can move it to the other hard disk
You can not (at least not me) move Event to Project or other way around only
Event to Event and Project to Project
Yours Bengt W

Changing between buttons when a widget is open

Similar Messages

Maybe you are looking for