Changing BP payment data tab

Hi ,
I am trying to change an existing BP by adding data to the payment transactions tab on BP transaction.
Is there any FM that can be used?
Regards
Srinivas K

Hi Srinivas,
for this requirement i think you need to call a series of FM in order to do that which is as follows:
BAPI_PCA_MASTER_CREATE
BUPA_NUMBERS_GET
BAPI_BUPA_PCARD_ADD
Hope this helps.
Regards
Sidd

Similar Messages

How to change payment date in cash flow

Hello Experts,
Ive had a facility with commitment fee. The calculated figure of the commitment fee is correct which based on period end date and the payment date in the cash flow tab was also the end date but I wanted to change the payment date in the cash flow of the commitment fee but the system does not allow me even if Im in an edit mode.
Appreciate your help.
Thanks,
Kath

Hi Katherine,
I can suggest you another solution for the case when calculation of the respective cash flow is correct, however you have kind of fluctuating payment date. Instead of correcting it in a deal, you can post it with different date as planned, so when you run TBB1, you have to specify the required date in the field 'Posting date instead of due date' in the set of fields 'Posting control'.
So you can actually use this feature for those irregular cases.
Hope it can help you.
Rgds,
Renatas

Change payment date

Can I change my payment date with creative cloud

If a customer is on a creative cloud individual, there is a provision where we can skip a few days and change the billing cycle, if et'all it is reallay neccessary, if they provide a very valid reason to do it. Some of us have the R3 Access to CSUI and we can look it up for CCM - Individual
So customers have to call Adobe Customer Service and beg (provide a valid reason which Adobe will accept)? Then the Adobe rep may (or may not) change the payment date at their discretion?
What if Adobe says "No sorry you must pay on the date. We cannot and will not change it." The customer cancels their membership?
Customers usually make such requests because they want to retain their membership and a few days adjustment in their payment date will help them do so. Seems odd for Adobe to make that difficult for the customer.
I suppose it's easier for new customers to cancel the membership (no penalty if less than 30 days since they joined) then re-join on a more convenient date?

Payment data from credit card to paypal

i want to change my payment data from credit card to paypal. in the FAQ it sais that this is possible for europe. how do i do that?

Hi there,
Payment method cannot be switched from credit card to PayPal in the current contract.
Please reach out to support here to cancel the current subscription and then purchase a new order with PayPal.
^Ani

How to replace existing fields in Addnl Data Tab in CV01N Transaction

Hi DMS Experts,
In cv01n transaction,
In Addnl Data Tab presently having following fields which i needs to be changed.
Addnl Data Tab:
Inbound Material Safety Data Sheet
MSDS Supplier
Product Number
Country
Dok-X Document Type
Dok-X Document Status
Dok-X Document Version
Dok-X Version Date
Above mentioned fields i have to change for Example i to maintain, Project Name, Responsible person name etc.
how i can do that.
Pls guide me step by step config steps
This i need very urgently.
Thanks in Advance.
Regards
Sandeep

Hi,
the additional data tab is controlled by means of classes created in DMS.
if your requirement is something like,
project name
responsible person name etc..
for this - in CL01, you can create class, say Project XYZ
in CT04 - you can create characteristics as project name and person name..etc for this class.
in each characteristics you can maintain the values which will serve the requirement.
hope this helps U..!
Thank You,
Manoj
award points if useful..!

How to change the default date in Person assignment tab?

Hi experts,
Does anyone know how to change the default date in person assignment tab in cj20n? Currently, the system always take the scheduled finish date to the date of the person assignment tab. Can I change it to the start date?
Thanks and rgs,
Michelle

Hi Michelle,
Goto SPRO->Project system->Dates->Scheduling->Specify Parameters for Network Scheduling, Here you can control the workforce planning dates.
Hope this is useful...
Regards
Aatish

How to display success message when data is changed in the custom tab in MM

Hi,
I have added a new custom data tab in the MM01/MM02/MM03 transactions. Whenever I do changes to fields in the custom tab in MM02 transaction, and no changes in the standard tabs, I will get a message stating "No Changes Made".
But if I do changes in the standard tabs, it works as usual with display of message "Changes to particular material has been done.
Please let me know, if anyone of you know, how to display the success message if the changes to the custom tab is done.
Thanks in advance,
sudhanva

Hi Sudhanva,
The exit EXIT_SAPLMGMU_0001 is a function exit that you can use for custom validation but not to add custom tab/screen.
But the message issued by SAP is not related to this Function Exit.
If you have used a Screen Exit, then there must be some Function Exits also in the same Enhancement using which you can assign the value of custom fields to/from the standard structure. Thus when the value of any custom field is changed the system can understand that the some changes have been changed and will not issue the message.
In case you have used a BADI, there can be other methods in the BADi using whcih you can assign the value of custom fields to/from the standard structure. This might also prevent the message from being displayed.
I could try giving you further details if you can provide the name of the Enhancement/BADi that you used to add the additional tab.
Hope this helps.
Regards,
Abhisek.

I Want To Change My Payment Due Date

Change Payment DateFrom: szygw9To: ATTCustomerCareSent: ‎07-08-2015 7:15:33 AMRead: Not Yet ReadI want to change my payment DUE date to the first week of the month, preferrably to the 1st day of every month! Because AT&T changed my payment DUE date to the 27th and there is NO money in my account until the 1st of every month, so I am incuring LATE charges. PLEASE change my payment DUE date to the 1st of every month. I have called in a few times and yesterday was the last time and the representative said she could not help me and she would email me directions on how to do this myself online! I have received NO email!

Hi there! @szygw9 thanks for posting your concerns. I’m sorry to hear you did not receive the email with steps to do this. At this time this is not a self-service option.
So we can see what options may be available to change this, please private message me by clicking here and provide your name and a good contact number.
We will contact you within two business days.
Thanks!
Charise

Change in payment due date

My bill has always been due on the first of the month. You are now changing my due date to the 27th of the month. So for the month of June, I will have made two payments to you, one on the 1st and one on the 27th. Then my payment will be due on 27 July and every month until the end of the year. I will have made 13 payments to you in this year. Next year, I assume that my bill will be due on the 27th of every month, so I will pay the bill 12 times. Why am I paying you 13 times this year and twice in one month?

ATT send me a text last week and again today:
Starting in June 2015, AT&T will standardize the number of days wireless and Digital Life customers have to pay their bill. As a result, a due date earlier or later than usual may appear on your wireless and/or Digital Life bill.
Due Date Change
If you receive a message on your bill, text message, or email directing you to this page, your due date will change. Otherwise, your payment date will be the same.
Important Note
No changes to monthly charges - A change to your payment due date only affects the amount of time you have to pay your bill. You will have about three weeks after the close of your billing cycle to make a payment. The change to your due date does not affect your billing cycle or billed charges.

Baseline date change OBB8- payment terms

Hi
Is it ok to change the baseline date in a payment term in OBB8 after posting several invoices? What consequesnces should this change have?
Thanks in advance
Aparna

This will effect for the all pending invocies. The effect could be change in the payment schedule for the vendors.

Compensation with changing payment date

Our customer has to close a lot of incoming invoices through Compensation process (close in the same time some incoming and some outgoing invoices of the same party). We plan to solve that through payment batch: the invoices will be selected and the batch will wait (will not be confirmed) till partner confirm compensation. But, very often, in the moment of confirmation, payment date has to be changed because it has been agreed differently with Partner Company.
EBS doesn't allow changing payment date in a payment batch.
May we create a procedure (concurrent request) to change payment date in a not confirmed payment batch? (Payment date is CHECK_DATE in AP_INV_SELECTION_CRITERIA_ALL). We know that we have to update also PAYMENT_DATE in AP_SELECTED_INVOICE_CHECKS_ALL.
Is there anything else what we have to change together with previously mentioned?
The procedure will be applicable only for payments in functional currency.

hi frane,
we cannot manipulate the data in apps tables other than interface tables provided by EBS.
if the payment date is not the value date for bank, then you can leave it as it is. if it is so important, modify your payment format program to change the date while creating the bank payment file for banker. as far as payment date on the unconfirmed batch it will stay the same and should not make any difference as long as the confirmation of the payment batch is not crossing the payable period.
thanks,

How to change payment date

Once again I've gone in circles over something simple. Adobe pisses me off! How do I change my billing payment date?

Sorry but, you can't change the billing payment date.

2.1 EA1: Unable to roll back changes in Data tab [fixed EA2]

Hi,
With "Post edits on row change" set, any changes made in a table's Data tab cannot be rolled back.
When trying to do so, the screen flashes briefly, which would indicate reloading, but the changes are still there. The tab's title is also still cursive and you're prompted to save the changes on closing the tab. When answering no, the tab is closed, but on reopening the changes are still there and sqldev doesn't recognize them anymore as posted!
The only way to get the original contents back is to exit and restart sqldev all together.
Please confirm and log as bug,
K.

1. Have post-on-row-changes ON. Set-Auto-commit-ON OFF
2. Update data in a cell, tab to the next row, the change is posted (update stmt issued)
3. Hit rollback button. The data is brought back to "original".
But the grid editor is shown dirty (the tab name is cursive) - this is the bug.
But I don't have a problem seeing the "original" data after rollback.
Plz validate.
-Raghu

Pricing Redetermination when custom field changes ON Additioanl data B Tab

Hi All Experts,
I have added new custom field(ZZ_STCEG, ZZ_ASTCEG and ZZ_MSTCEG) on Addititonal data Tab B. Before that i added those fields in KOMP(ZZ_STCEG) and VBAP(ZZ_STCEG, ZZ_ASTCEG and ZZ_MSTCEG).
I have a function module which gives output EX_STCEG.
Now i need to assign the ZZ_STCEG to ZZ_ASTCEG as it is determined by system. If i enter value in Manual field(ZZ_MSTCEG) this should be used for pricing and also assign it to ZZ_STCEG. (Note: But ZZ_ASTCEG should not be changed as it is automatically determined beforre.)
I have programmed in UserExit_Pricing_Prepare_TKOMP as below.
Call to function module(output ex_stceg)
vbap-zz_astceg = ex_Stceg.
if vbap-zz_mstceg is not initial.
vbap-zz_stceg = vbap-zz_mstceg.
tkomp-zz_stceg = vbap-zz_mstceg.
else.
vbap-zz_stceg = vbap-ex_stceg.
tkomp-zz_stceg = vbap-ex_stceg.
endif.
But it is not working as intended. I think because Vbap_zz_Mstceg doesnot have value during pricing because we fill it after the pricing in additional data tab B.
Please suggest me how to proceed with this situation.
Thanks & regards,
NarsiReddy.

In your screen 8309, you can do like below, when you hit enter in the field the princing will be recalculated:
FIELD VBAP-ZZ_STCEG MODULE zm_blablala ON REQUEST.
MODULE zm_blablabla.
* This standard perform will do the pricing redetermination
PERFORM preisfindung_gesamt USING 'C'.
ENDMODULE.
Regards,
Felipe Simionatto

SAP renamed 'Purchase Order Data' tabs but it is not changed in menu bar

In VA01/VA02/VA03 transactions, SAP has renamed the "Purchase Order Data" tabs at header and item level to "Order Data" but the Goto > Header and Goto > Item menu paths still have "Purchase Order Data" as the name. This is inconsistent. Is there an SAP fix for it?

Try wit this report RSLANG20
Best regards,
Mirek

Changing BP payment data tab

Similar Messages

Maybe you are looking for