Changing brush size with mouse

how to change size ardness of brush with the mouse on photoshop cc, mac os ? normaly it is ctrl + cliq up/down and left/ right

Thx a lot kelly !!
I was clicking and then control option
Merci beaucoup !!

Similar Messages

CHANGE BRUSH SIZE WITH CTRL and alt KEYS

Hello everyone,
i'm on the road with my new macbook and i have a problem with setting up my wacom pen.
At home i use a iMac with CS5 and to change the brush size i press the alt and the ctrl key and move the pen to left/tight up/down to chang size and hardnes of the brush. I find this very handy!
On my new Macbook i have CC and i don't have the option to use this easy key combination, i was loking around and did some google, but i could not find the place to get the same settings on my macbook.
Is there anyone who can help me?
Thank you very much.

When you press and hold Option/Alt + Control and Left mouse click and drag nothing happens?
(the button on your pen is set to left click?)
The Option/Alt key should always be the second key to the left of the spacebar
The Control key should always be the third key to the left of the spacebar

Changing brush size with keyboard?

is there a way to change the size of a brush, like that of the clone stamp without having to drag the slider in the property inspector, but instead with a keyboard short cut like you can do in Photoshop?

It's possible that there exists an extension for this...
http://johndunning.com/fireworks/
http://orangecommands.com/
Here are a couple of places I'd search for this... Maybe it'll help!

ACR 7.3 Bug on Adjustment Brush tool - changing brush size problem.

I update photoshop and using ACR 7.3 and now having big problem when I use Adjustment Brush took. Phe problem is when try to change brush size with holding right mouse button and moving the mouse. Behavior completely changed and its impossible to predict if I move mouse right what will happen.
Please check solution for it. old behaviour was great. I think this is not new feature, its bug.
Thanks in advance.

No need.
Already bugged and acknowledged: http://feedback.photoshop.com/photoshop_family/topics/bug_crash_adjustment_brush.

Change brush sizes using [ ] too slow

I've recently swapped from Windows to Mac and I'm glad to be on Mac now. But whenever I'm changing brush sizes using the bracket keys the response time is way to slow.. I search the forum but found nothing on this. anyone have a fix for this..
Running Leopard with OS 10.5.4 three internal harddrives and 10 gigs ram.
All updates and patches were installed prior to photoshop.
Machine is one week old.

I completely remove Photoshop and did a clean install. Before changing anything I opened an image and tried increasing and decreasing my brush size using the bracket keys and everything was fine. The brush changes as soon as you hit the bracket key.
But as soon as you highlight the info palette top right corner and make it active then come back over the picture and try changing the brush size I'm getting a one second delay. If I hit the bracket key three times quickly the brush completely disapears and then reapears at the appropriate size.
This is a clean install with no plugins, no new fonts, no new nothing.
I then downloaded the latest upgrades.. Reset disk permission, ran the chron scripts and I'm getting the exact same reaction from photoshop when attempting to change brush size with the bracket keys.
Can anybody else reproduce this buy highlighting the info palette??
I called a buddy who also recently purchased a new Mac Pro and his machine is doing the exact same thing.

Mouse Wheel Scroll - Change Brush Size

Hi
I use the "Liquify" filter a lot, and I've always wanted to be have the mouse wheel adjust brush size.
(I'm not that keen on using the left-right bracket to adjust brush size.)
Thanks.
Q. Barrie

I'm not sure, but with the OpenGL features enabled you can use a couple of combinatorial gestures to change brush size, and it gives you very fine control:
Hold down the Alt key and click the right mouse button down on your image. While holding it down, if you drag the mouse left, your brush will get smaller, and if you drag right it will get larger. Drag it up to make it softer, down to make it harder.
-Noel

Changing brush size in camera raw?

I'm having trouble with changing brush size in the camera raw brush tools.
What I use for input is a scandinavian keyboard and I have to type in alt gr+8 and alt gr+9 instead of brackets.
This works great in Photoshop, but sadly not in Camera Raw.
Is anyone able to help me?

That works well, thanks for this.
Any idea why the brush sizing feature is not similar to Lightroom where you can simply scroll vertically on the Magic Mouse?
Cheers,

How can I set the CS5 to Intuos Pro Large for changing brush size and opacity and others?

How can I set together to my PS5 or Ps6 in order to change brush size and opacity at the Intuos Pro Large?
Nachricht geändert durch Orhan Tarman

The MTU setting on the interface is the layer 3 packet size. In this case, the MTU is set to 1500, but the largest frame size transmitted on the interface (including layer 2 headers) is 1516. It sounds like you are experiencing another problem at the LES.

How to change flash size with ac3?

I want to change flash size with xml. Sample config.xml
<genGenis>300</genGenis>
<genYuksek>100</genYuksek>
My flash read xml and change size to 300 * 100
After working in a flash I want to change the default values. Is this possible?

Have you worked with XML before? You're going to need to load that XML file and wait for it to complete. After you do that, are you using layout logic based on these values to create your content? Meaning do you have code in place to realize you have (as you said) 500x200 space so your code is able to use the space available effectively? Or do you just expect the content of the SWF to scale automagically?
As for the loader, you can use a simple URLLoader to load the external XML file. Here's a quick Adobe code snippit and explaination on how to load it:
http://help.adobe.com/en_US/as3/dev/WS5b3ccc516d4fbf351e63e3d118a9b90204-7e6a.html
Once you have the XML in an XML object you can just access the value via the XML variable name you make (e.g. myXML) with the name of the node while getting its text value. In your case you'll need to convert it to a Number because you may want the flexibility of using fractions (e.g. 1.5, 500.25, etc). So you'd need to case the value to a number. So to get the width it'd be like: var myWidth:Number = Number(myXML.genGenis.text()); and same for height just changing the variable and node name as needed.
Now that you have your values you can write layout code to use the numbers and handle the content creation yourself.
If you don't do that, as Andrei1 mentioned you'll need to affect the object embedded directly using ExternalInterface (Flash AS3 talking to the webpages JavaScript) requesting the object be resized to the new size.
You'll want to make sure your stage.scaleMode = StageScaleMode.EXACT_FIT; or stage.scaleMode = StageScaleMode.NO_BORDER; so your SWF content is "stretched" to the size you request. Exact fit will allow the content to distort if necessary to fill the width and height. No border will scale the content to the size specified but will maintain the aspect ratio. It's up to you whichever you want.
If you have any specific questions on any of this just ask.

Changing brush size while erasing with adjustment brush.

I have search around and have been unable to locate the short cut keys to increase and decrease the brush size while erasing. I use the bracket keys to change the brush size for the brush itself, but when I press the alt key to switch to the eraser, I can't figure out any short cut keys for changing the size of the eraser. It works to go over to the panel, but that is a pain. There must be a short cut for this. Thanks, Eric

That's what I was afraid of. Hopefully in the next version. Thanks, Eric
Eric A. Wulfsberg
[email protected]
www.ericwulfsbergphotography.com
Member, Center for Fine Art Photography

Changing Brush size in ACR 7.2 - bug oder feature?

The update to ACR 7.2 changed the way the adjustment of the brush size is behaving. Before one pressed the right mouse button and moved left or right to change the size. Now it's not just left to right but right to left or up and down depending on where the tiny mouse indicatior on the outmost circle is placed. The has as an effect that it's not immediately clear in which direction the mouse has to be moved to change the size. Also the brush circle is move to the side while adjusting and is not congruent with the brushcircle after releasing the mouse botton.
Any ideas if this is a feature or a bug?

The ACR7.3 update did not fix the brush resize problem on my system either - also Win7x64 Ultimate, Ps 13.0.1 (currently I use only the x64 install but the problem exists with ACR hosted in the 32-bit install as well) and ACR 7.3.0.71.
Another annoying thing I've noticed with 7.3 (maybe it was there before 7.3 but I never noticed it) is that even if you set the Feather slider to zero pixels, as soon as you set the brush size to 10 pixels or more, the brush is shown as being feathered. Maybe the 10 pixel cutoff is related to my screen size and resolution: 1920x1200 and 88ppi (NEC MultiSync LCD 2690 WUXi2) but it is still disconcerting at any size.
The unexpected movement of the centre of the brush when you right click reported by the OP, another annoying characteristic, is always towards the centre point of your screen. If you are left of centre, it moves right and vice versa. If you are above centre it moves down and vice versa. Combinations move diagonally towards the centre.
Eric Chan seemed to acknowledge the mouse right-click brush resize and brush centre movement problems with ACR 7.2 in his post #1. Looks like he's forgotten us or has been too busy with other matters. Either way , it would be nice to hear from him again with an update.

Changing brush size deletes the layer

In CS5 on Mac OS X 10.8.2, using the [ key to change the brush size deletes the current layer after two-three presses. Why is that and how do I stop it from happening?
The also happens with the scroll ring on a wacom intuos 5 tablet.
Pressing and holding the [ shrinks the brush, but can't do that with a wacom.
Thanks

Try resetting the preferences other than that post some screen shots of before/after maybe we can see something.

How can I change brush size?

I really have two questions.
1. How can I change the size of the brush tool? It's all greyed out on every project I start, stuck at the very smallest size (0.10). I'm trying to trace over a photo at the moment, and it's taking FOREVER with the tiny little brush. It only un-greys itself after I draw a line, but I can only change the size of the line I've just drawn. As soon as I go to draw a new line, it goes straight back to size 0.10. It's incredibly frustrating!
I'd use the pencil tool, because I can change that, but...
2. How do you make the eyedropper tool put your chosen colour into the pencil colour box as opposed to the brush box? Every time I use it, it forces me to use the brush. Which, because of the above problem, is ridiculously inconvenient to draw with in just about every situation.

Does nobody know the answer to this? It sounds like it would have a simple answer...

Cannot change page size with acrobat

I am able to convert my manuscript in Mac word(2011) to adobe acrobat (XI); unfortunately the 6 X 9 " page size does not convert. I spent a few hours on the phone with adobe support and the final resolution was to upload the file to them and they converted it for me. however, they used distiller which reduced the file size and appears to have affected the many images. Does anyone have any advice? The best I have been able to glean online is work with inDesign to change page size.

Thanks.
The problem was with the paper size. In addition to change the page size I needed to change the paper size in the print option before selecting save Adobe PDF.
From Word go to File> Print
Open the Copies & Pages dropdown
Select Paper Handling
Check the Scale to fit paper size box
Open the Destination Paper Size list
Select your custom 6x9 Preset
Click the PDF button
Select either Save as PDF or Save as Adobe PDF
The unfortunate thing is that I was able to do this initially, but when I went back to replicate it adobe is creating 2 files one with my cover page and the rest to the manuscript. Luckily my initial copy was good. Thanks again for your help.

Changing brush size in flash

Hi everryone - just wondering if anyone knows how to change
the brush size on flash? sorry if it sounds like a easy question
its just I havn't been able to find an apropriate button to change
it. I have done lots of other effects on the brush jsut not
changing its dize - does anyone know about this problem? -
Helen

On the toolbar above the Fl logo click the two arrows to
widen out the toolbar and it will show two brush settings at the
bottom, the right one is the brush shape and left the size.
Hope it helped.

Changing brush size with mouse

Similar Messages

Maybe you are looking for