Changing Budget Profile

Hi Experts,
After creating a project in CJ20N and then saving it, I need to change the budget profile. However after opening the project again the budget profile was greyed up and it did not allow me to change the budget profile.
I hope someone can advice me on how I can solve this issue or which T-code I could use to configure this. Thanks.

Hello,
The system settings since the budget profile is greyed out:
Go to the field selection of project profile
check if it is in the hidden/display mode.
Then try to enable it to required/input mode.
It should work
While a WBS is budgeted and then the profile is changed, the new settings take place for existing structure and new structure creation. Hence the field selection is hidden for budget profiles in the project proflie field so that you will not be able to change the budget proflie.
Thanks
Vittal

Similar Messages

Change in budget profile

Dear Gurus,
Greetings,
Please suggest me can I uncheck overall budget values in budget profile. already we have been using budget profile which is both oevrall values and annual values is checked. its configured 2 years back. Now I want to use on annual values budget profile.
My querries is can i uncheck over all values in between project duration?, is there any adverse impact on project? , wheteher any reconstruction program is needed for the exixsting project?
Please revert.
and thanx in advance

Hi,
mohd ansari wrote:
My querries is can i uncheck over all values in between project duration?, is there any adverse impact on project? , wheteher any reconstruction program is needed for the exixsting project?
Impact: No impact on existing project budget consumption. Budget profile changes will impact project if you was using only annual or only overall. And also that needs some manual work.
Reconstruction Needed: Yes, it will correct if some inconsistencies occur. Run CJEN and CJBN in sequence after changes in budget profile
Note: Don't forget to run a cycle in testing server to double sure.
Regards
Shishir

Assign plan/budget profile for internal order

i just tried to use T-code KO22 to do change budget for an order, but error msg show 'Assign a plan or Budget profile to the object'.so i wonder how to create the plan or Budget profile and assigned it? waiting for your answer....

Hi,
maintenance for budgeting profiles: T-code OKOB
assignment to internal order types: T-code KOAB.
Best regards, Christian

How to blocked budget profile

HI,
I am going for BCS from FB at the end of fiscal year,
Can you explain me, how i used the budget profile for blocking the next fiscal year,
so that no one can entered use Former budgeting in next fiscal year ?
Thanks
Nilesh

Dear Nilesh,
This is a situation that will not occur, whenever you implement BCS, former budgeting will be not active anymore. But you should consider a migration project this change to BCS.
Please check the customizing settings and also the documentation available in front of each line of the path below:
SPRO -> Public Sector Management -> Funds Management Government -> Budget Control System (BCS) -> Migration of Former Budgeting to BCS and all subitems:
Overview of Migration Activities
Display Assignment Rules for Budgeting Process
Display Assignment Rules for Value Type
Define Derivation Strategy for Header Data
Define Derivation Strategy for Line Items
Activate Full Migration for Carryover Documents
Migrate Budget Totals
Migrate Budget Documents
Migrate Cover Pools and Unilateral CE Rules
Please check also the following link in help.sap.com
http://help.sap.com/erp2005_ehp_04/helpdata/en/7b/981b57da056c48904c8a9c0df67b51/frameset.htm
And all the subitems available there.
Check also the note:
956356 Migration from 4.6C FI-FM and former FI-FM releases to BCS
788434 Allow additive mode in totals migration
I hope that this answer your inquiry.
Best Regards,
Vanessa Barth.

Can't change budget for IO via KO22

Hi, when I tried to display or change the IO budget via tcode KO23 or KO22 , respectively, I got the below error mesg:-
No update in foreign currency planned for controlling area CRTL
Message no. BP414
Diagnosis
In budget profile Z00000 assigned to the object to be processed, "user-selected currency" or "object currency" was chosen as budgeting currency.
This means that budget values can be entered in currencies deviating from the controlling area currency.
In controlling area CRTL, however, you have not set the control indicator "All currencies" for all fiscal years that can be budgeted due to the budget profile settings.
In the case of budgeting of overall values, the indicator must be set for the year of the value date maintained in the budget profile.
System response
No budget values can be entered.
Procedure
Set the control indicator "All currencies" in controlling area CRTL for all fiscal years.
How should I go about resolving this issue?
Edited by: Quek Ethan on Apr 13, 2009 10:52 AM
Edited by: Quek Ethan on Apr 13, 2009 10:52 AM

Hi Reddy,
I only changed the Budgeting Currency to Controlling area currency & then it works. Why can't I leave the budgeting currency = Transaction currency? what's the difference?
I tried other IOs with a different Order type but it didn't give me the same problem. Is there some config that is tied to the IO type?
Best Regards,
Ethan Quek
Edited by: Quek Ethan on Apr 13, 2009 4:05 PM

Skype crashes upon call and when i try to change my profile settings

Recently (Or not, it's been like a month) I've been having issues with Skype 7.0 or any versions more recent than that. Every time I host or join a call and every time I try to change my profile picture my Skype goes "Not responding" and seconds later my PC freezes. But legit FREEZES: I can't go to start menu, I can't open windows taskmanager, I can't alt + tab, nothing. I have to hard restart my pc. I've tried downgrading to 6.14 and that works perfectly. Until I turn off my pc and start it up again because for some weird reason, whenever I start my PC and Skype opens up it's back to 7.0 or 7.3 or 7.4, even with automatic updates turned off. I've updated all my drivers, started my PC with nothing plugged in but the power cord and it's still doing the thing. I've been uninstalling Skype and reinstalling 6.14 every day for weeks now, I'm sick of it. I need help. (I've included my DxDiag since I see a lot of support staff ask for it)

Perhaps information on the issue will be available in the System Information tool (msinfo32). Go to Windows Start and in the Run box type msinfo32.exe and press the OK button. This will open the System Information window. In this window click on File and select Export. Save the msinfo.txt file to your hard drive, Zip this file and attach the zipped file to your post here.

User Profile Incremental Sync does not views changes in profiles.

User Profile Incremental Sync does not views changes in profiles. I make full sync - all ok. then I change the phone number for example, and then start incremental sync and nothing moves to AD.
All the stages of FIM sync just state 0 records to process. Looks like it does not see the changes
1.profile property is set up to sync with AD attribute (with EXPORT).
2.no errors in Windows logs or FIM UI client, nor in sharepoint UI
3. sharepoint server 2010 SP1, "CU June 2012" 14.0.6123.5002
4. I have just reprovisioned sync service, set up AD connections and property-attribute relations. before
there was this problem http://social.msdn.microsoft.com/Forums/en-US/cb2b8aeb-d1b6-49a6-a788-2491ca45308a/critical-error-6398-userprofileimportjob-problem-profile-sync-malfunction?forum=sharepointadminhttp://social.msdn.microsoft.com/Forums/en-US/cb2b8aeb-d1b6-49a6-a788-2491ca45308a/critical-error-6398-userprofileimportjob-problem-profile-sync-malfunction?forum=sharepointadmin,
which I resolved by clearing timer service cache.
Help with advice, urls or solurions please..

Hi VlH,
According to your description, the issue can be caused by the Profile or Profile Values table.
You can check the event log and ULS log to see detail error message.
To check event log, click the Start button and type “Event Viewer” in the Search box.
For SharePoint 2013, by default, ULS log is at
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS
For your issue you can refer to the similar thread:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/bc3cd2ff-dc12-4223-a80b-e4cae616e861/user-profile-sync-doesnt-update-the-profiles-from-ad?forum=sharepointadminlegacy
Also a good blog for user profile synchronization:
http://www.harbar.net/articles/sp2010ups.aspx
Best Regards,
Eric
Eric Tao
TechNet Community Support

How to change the profile value in the pl/sql code without making change in the database

How to change the profile value in the pl/sql code without making change in the database.

I have program ,where if the profiles 'printer and nunber of copies ' are set at the user level, by default when the report completes the O/p will be sent to the printer mentioned in the set-up. but what user wants is
if these Profiles are set for the user running this program automatic printing should not be done.

I'm using iphone 4s and after upgrading to ios 6, my facebook app seems to have lsot the 'share' button altogether, which means i cant share anything on my news feed. I cant change my profile or cover pic on fb which i could before the upgrade. Help Pls

I'm using an iphone 4S with IOS 6. Before the upgrade I was able to share thigns from my news feed on facebook and change pictures (profile, cover) from my phone. After upgrading I cannot share or change pictures or articles. I've tried resetting my phone, deleting and re-installing fb app, but no success. Would appreciate any help, suggestions...Cheers

I've never been able to share FaceBook posts nor seen the option using the iOS FaceBook app regardless the FaceBook app and iOS version. I can Like and I can Comment, and if I select a link or video to view under iOS 6, I can use the Share option for the link or video, but not for a post.

How do I change my profile in Netflix on the iPad mini

I Want to change my profile from one of my family members to mine but not the accounts just the profiles. I would love it if someone could please tell me how I can do that on my iPad mini for Netflix.

Quote below is from the Netflix support site https://help.netflix.com/en/node/10421
But I would contact Netflix for a definitive answer -- the "Current wait time" is less than one minute in the "Call Us" link at https://help.netflix.com/help
*You can add, edit, and delete profiles from the website, PS3/PS4, and the Windows 8 app.

How to change budget year in PO

Hi
How to change budget year in PO
Thanks
Ajit

Depends on the pattern of the dates. The last procedure will work for any pattern, or no pattern at all.
For examples.the dates are assumed to be in column A, starting at A2
Sequential dates?
Enter first updated date in the first cell.
Enter =A2+1 in cell A3. Copy the cell.
Select A3 to the end of the list. Paste.
With the cells still selected, Copy, then go Edit > Paste Values.
Evenly spaced dates?
Same procedure as above, but replace +1 in the formula with + and the number of days between dates in the list.
Randomly spaced dates?
Select cell B2. Press option-left arrow to insert a (temporary) column to the left of column B.
Click on the empty cell B2 in the new column. Enter the formula below:
=DATE(YEAR(A)+1,MONTH(A),DAY(A))
Copy the cell, then select B2 - Bn where n is the last ow containing a date to be converted. Paste,
With the cells still selected, Copy.
Click on A2, then go Edit > Paste values.
Click on the column B reference tab to select all of column B.
Hover the mouse over the right end of the reference tab, and click the black triangle when it appears.
Choose Delete Column from the menu that appears.
Regards,
Barry

How do I change my profile - want to change username from user568042

How do I change my profile so that my username is no longer user568042? I have tried to go into my profile and change my name: What they call a handle (username) in my profile; to something different, but it won't let me.

You are right. However, I tried just what you told me about a month ago and no matter what I did, it wouldn't let me. I knew that it wasn't that hard, but I could never get it to work. Thanks. It worked.

Hi I am actually in the UK - need to change my profile, b...

Hi
I am actually in the UK - need to change my profile, but...
Can anyone give me advice on a small-office network choice of components and cnfiguration? I am a relative newbie for larger-scale networking, and am looking to clean up and improve our network. We have a typical "domestic" 4-port wireless broadband router (Netgear) connected to a cable modem and a collection collection of 3 small 5-port hubs (1 D-Link, 1 Netgear, 1 generic own-brand - forget who) and a wireless extender to give us more ports as we ran out several times.
I would prefer to get a single good quality switch/router from one source as we keep getting outages and having to reset the network maybe once per day to gete the machine all to talk to each other, and we also have regular conflicts over bandwidth use where one person's large downloads may effectively prevent others from getting any decent internet access via http/ftp/smtp etc. We have about 6 desktop PCs and a similar number of laptops, and a few gaming consoles that need to be connected, plus occasional visitors who would like access out to the internet (but usually these are people we know and trust).
I am guessing that a 24-port gigabit switch would be a good option, but do we need a separate router or is there a combined 24-port switch/router? What do we do if we want 2 wireless access points? How can we control the priority and/or amount of bandwidth allocated to different types of traffic? What about VPN access or similar that we might want in the (near) future? I can't find any more tutorials or guides about good choices of kit to make this all work well.

you will need a separate router and switch. you may check some vpn routers from linksys if you want vpn connection behind the router. you may try rv08, rv016 or rv042. any gigabit switch will be fine behind the router.

Assign Plan/Budget profile to Internal Order

While executing KO22 for particular internal order for order type 0800, I am getting the error - Assign Plan/Budget profile to the object.
GMR

hi
while defining the order type in IMG ,you have to define the buget profile and then check
regards
thyagarajan

How can I change my Profile photo or edit the thumbnail?

QuestionHow can I change my Profile photo or edit the thumbnail?
AnswerThere are a couple of different ways to change your profile photo or thumbnail image on Tagged.
Here's a quick How-to video that shows you how to change your profile photo
If you wish to change your profile photo, follow the instructions listed below:
Hover your mouse over 'More' in the top Nav bar and select Photos.
To use one of your previously uploaded photos as your profile photo, place the cursor over the photo you wish to use, and click the small green “#1” box when it appears
If you wish to use a new image as your profile photo, upload the image to your photo gallery, and then click the small green “#1” box on the photo
If you are viewing one of your photos individually, you can also set it as your profile photo by hovering over it and clicking the same green "#1" button. You may also edit the caption and comment on your photo in this view
You can also change your profile photo by doing the following:
On the Navigation bar click Profile and select the Edit Profile link to the left of your Profile picture.
To upload a photo locally from your computer, click the “Browse” button, select the image you wish you use, and then click “Upload”.
To upload a photo using an image URL address, click the “Add from image URL” link, paste the URL address into the field, and click “Add Photo”.
To use a photo from your gallery, click the “Use one of my photos” link to open a thumbnail gallery of your uploaded images. Click on a thumbnail to set that image as your profile photo.
After selecting a photo, you can alter its thumbnail by the marquee box by dragging the “anchor” points of the box. When you are finished, click "Save Thumbnail"

HELP! I was fooling around with my profile pic and selected and saved a cropped thumbnail. I hate it, and I haven't been able to figure out how to return my thumbnail to just a mini-version of my full profile pic. I've even re-up-loaded a copy of the original photo, with a different file name, but Tagged automatically crops it to the same thumbnail. Is there any way to return my thumbnail to just a mini-version of my whole pic? Thanks for your help :~)

Changing Budget Profile

Similar Messages

Maybe you are looking for