Changing calender work days without phone numerals

I work in saudi arabia. I just bought my iphone and inorder to change the work days on my calender i had to change the region format under international, but doing so changed all the numerals into arabic format which is hard for me to read. is there a way i can keep the work days as saturday to wednesday while holding the numberal to english.
Please help me i do not want to chose one of two cuz life is much harder that way.

After speaking with numerous CSR's and being told a technician would have to come out next week, our problem is resolved.  Someone from the Network Team looked at the network configuration and found an issue.  He corrected this issue and we can now successfully make and receive calls.  He also made a note in case the issue happens again.
By the way, I discovered the Automatic Call Forwarding feature with digital voice.  I set this up, and all calls were automatically forwarded to my cell phone while our phone service was down; once our phones came back up this shut off automatically.  It's a great feature but I wish one of the CSR's would have mentioned it.
Thanks for your assistance.

Similar Messages

  • Diffrence between working days & calander days

    HI Gurus,
                 What is diffrence between working days and calander days.
    In case of GR processing time in materail master it is working days but in case of planned delivery time it is calander days. Means planned delivery time is not consideruing any holidays, right.....
    Regerds
    ACP

    Hi
    Workings days ; will list the working days without the holidays.but
    calender days ; consider also the leave days also.
    so in GR processing time  is used to the interal acitivities say that after receive the material GR the material need to do the  GR process timing say inspection and documentations , then the material located to the Raw material sto location.
    so the GR processing time  is purelu based on the plant activies. so it consider the Working days only.
    but in  planned delivery time  is given for vendor to delivary the material. so it consider the calender days .

  • How/ where to change a weekly off to working day, working day to weekly off by maintaining IT0007 is 7-time evaluation without payroll integration

    Dear Experts
    We are doing Negative Time Management where we record only deviations
    But customer has third party time machine which required to be integrated with SAP system
    As I know, from the time recording terminal, i should map SAP number to all employees and then get a text mail the  details with employee attendance for the  respective dates and times. Then, have to create a ABAP report which will read the text file and update clock in/out with date into SAP system. After this we can check employee attendance infotype 2011.
    But, Before going for above, time administrator wants to set IT0007 as 7- time evaluation without payroll integration, then maintain data in IT0050 & IT2011
    Then run Time Evaluation then the out put will be according to the data maintained in IT 2011. Now the  requirement is, time administrator wants to change eg. the  day is suppose to be working day for any employee but based on adjustments that day became weekly off, another employee suppose to work but again due to some adjustments that day became weekly off, so how this time administrator can change this and where. This is like, time administrator  need to see the total work schedule for an employee and needs to change whichever data and whenever or after time evaluation, he could see the total work schedule as desired.
    And also, time administrator wants to change schedule manually for any of the employee during that particular period and view the same.
    Please note that, ESS/MSS haven't implemented yet.
    Appreciated all your prompt responses to this.
    Thanks
    SS

    No
    I have created a workschedule on wednesday In a year there can be weekly off 5 or 6 times on Saturday or Sunday So  in that case there is no need to create three workschedules we can create one workschedule and change the days Again we need to regenerate the workschedules inorder to take 'off's" in to account. that is what iam thinkinng at the moment. Yes there is no need to do anything in IT 007 If there is any change in Shift in that Case User has to change workschedule in IT 007.
    If there is weekly off he can select the dates on which day it is falling and generate the workschedule.
    for changing shifts he should change work schedule in IT 007
    Is this is right approach please throw some light on this
    My client requirement was Sometimes there can be weekly off in the company It can be either wednesday off or saturday off or
    unday off or it can be any day.
    Edited by: My SAP Cronies on Feb 2, 2012 5:17 AM
    Edited by: My SAP Cronies on Feb 2, 2012 5:22 AM

  • Working days between two date fields and Changing Factory Calendar

    Hi,
    I have to calculate working days between two date fields excluding the weekends and public holidays for Switzerland.
    I have written the routine using factory calender and its working fine except for two problems now:
    1. If any one of the date field is empty then teh rsult should be zero.
    2. And the below code is working from 1996 but my cleints wants it to work for years before 1996 as well.
    I also tried to change the Start date in SCAL for factory calendar but it says enter values between 1995 to 2020.
    I am new to ABAP. Please help me how i can achieve these for below code.
    DATA: IT_HOLIDAYS type TABLE OF ISCAL_DAY,
          IS_HOLIDAYS TYPE ISCAL_DAY.
    DATA: T_DATE TYPE SY-DATUM,
          P_DATE TYPE SY-DATUM.
    DATA : X_DATE(4) TYPE C.
    DATA: CNT TYPE I.
    REFRESH : IT_HOLIDAYS.
    CLEAR : IT_HOLIDAYS.
    T_DATE = SOURCE_FIELDS-/BIC/ZCCCHP812.
    P_DATE = SOURCE_FIELDS-/BIC/ZCCCHP810.
    CALL FUNCTION 'HOLIDAY_GET'
    EXPORTING
    HOLIDAY_CALENDAR = 'CH'
    FACTORY_CALENDAR = 'CH'
    DATE_FROM = P_DATE
    DATE_TO   = T_DATE
    TABLES
    HOLIDAYS = IT_HOLIDAYS
    EXCEPTIONS
    FACTORY_CALENDAR_NOT_FOUND = 1
    HOLIDAY_CALENDAR_NOT_FOUND = 2
    DATE_HAS_INVALID_FORMAT = 3
    DATE_INCONSISTENCY = 4
    OTHERS = 5.
    DESCRIBE TABLE IT_HOLIDAYS LINES CNT.
    X_DATE = T_DATE - P_DATE - CNT.
    RESULT = X_DATE.
    Please help
    Regards
    Zabina
    Edited by: Syed786 on Nov 2, 2011 9:15 AM

    Hi Zabina,
    Try this function module  'DURATION_DETERMINE'.
    Give the factory calendar and unit as DAY
    With regards,
    Rajesh

  • My batterie doesn't work correctly to my Iphone 5. It should work longer, but it's worse. My battery does not hold a full day without much use.

    It should work longer, but it's worse. My battery does not hold a full day without much use.
    When the new version of ISO6 will come ??? A lot of apps don't work correctly too.... :-(
    I'm a little bit disappointed...

    Sounds like your iPhone is locked to your home carrier.
    See if they offer unlocking and if you qualify. Otherwise,
    there is nothing you can do besides rent/but a cheap
    phone for your month in Argentina.

  • Ess Leave  Request -Change in Time calculation without changing work schedu

    Hi All,
    We are implementing a ESS Leave Request in EP6 with backend HR ECC5.0.
    The time calculation is taken  from the Work schedule rule in
    HR backend which is 24*7.
    For example if the leave taken is for 2 days-systems calculates as 24*2=48 hrs
    but in actual the requirement is to calculate 2*8 =16 hrs without changing
    the Work Schedule in 2001 infotype in HR Backend.
    Can we do this change through
    1.Validation in portal itself
    2.Changing the RFC PT_ARQ_REQUEST_CHECK
    3.Changing the Absence Types
    Regards
    Anand.

    Hello,
    Please use:
    programming
    but without the spaces before and after } and {
    Testing:
    programming
    regards
    Rick Bakker
    Hanabi Technology

  • FM to get number of working days in a date range for a calender

    Hi all,
           Can you tell me the Function Module which takes start date ,, end date and factory calender as input and gives back working days or number of working days as return.
    Win full points for the resolution...
    Thanks in Advance...
    Chandan Dubey

    Hi chandan,
    1. DATE_CHECK_WORKINGDAY
    This is one useful FM
    2. Try this code (just copy paste)
    IT DOES EXACTLY WHAT U REQUIRE.
    REPORT abc.
    data : num type i.
    parameters : frdate type sy-datum default '20051216'.
    parameters : todate type sy-datum default '20051221'.
    perform getinfo using frdate todate changing num.
    break-point.
    *& Form getinfo
    text
    FORM getinfo USING fromdate todate CHANGING numofdays type i.
    DATA : d TYPE sy-datum.
    d = fromdate - 1.
    DO.
    d = d + 1.
    IF d > todate.
    EXIT.
    endif.
    CALL FUNCTION 'DATE_CHECK_WORKINGDAY'
    EXPORTING
    date = d
    factory_calendar_id = '01'
    message_type = 'I'
    EXCEPTIONS
    date_after_range = 1
    date_before_range = 2
    date_invalid = 3
    date_no_workingday = 4
    factory_calendar_not_found = 5
    message_type_invalid = 6
    OTHERS = 7.
    IF sy-subrc = 0.
    numofdays = numofdays + 1.
    write :/ d.
    ENDIF.
    ENDDO.
    ENDFORM. "getinfo
    I hope it helps.
    Regards,
    Amit M.

  • Day 2 Phone still not working.

    Dear Comcast, My new modem still is not functioning properly, even though your system online says it is. Please see attached photos. Ironically, your phone system (1-800-XFINITY / 1-800-934-6489) is also currently not working despite multiple attempts on my cell phone (Thank you, AT&T for a functioning cell phone. Perhaps your phone, cable, internet will soon my mine as well!) to call and report our problem yet again. Calling 1-800-XFINITY is just resulting in the following, "Your call cannot be completed at this time. Please try again later". PLEASE FIX OUR PHONE PROBLEM! Oh, and credit our account for two days of no phone service (8/3 & 8/4). And, for a third day, July 4th, 2015 when we were without phone service and asked for a credit for that day but could only speak to a customer service rep at a call center in MEXICO who said they couldn't adjust our account at this time because of the holiday and no U.S. staff available. Please know that I am completely done with Comcast. I have been asking my husband to drop all of your services for months and he is starting to come around to my side on this. Either give us a better deal on our "triple play" since we get absolutely NO customer service, or be prepared to lose a customer to AT&T!!!!!!! 

    my money is on a hardware issue

  • I have an iphone and ipad but no other computer at home.  I used to have itunes on my work computer. How to I access and make changes to my itunes without another computer?  thanks

    I have an iphone and ipad but no other computer at home.  I used to have itunes on my work computer. How to I access and make changes to my itunes without another computer?  thanks

    At this point you have the option of keeping a device optimized version (lower resolution version) of your photo on your phone while iCloud stores a full resolution version.  Or keeping the full resolution version on both your phone and the iCloud. If you delete the photo on your phone it will be deleted on the iCloud. I know, bummer. Also it should be noted that the photos app and the library are still in beta and to this point i see why.  I would use dropbox or a smiliar app for off device storage.
    So far this is how it has been working/not working for me.  Whether or not I choose to keep originals or optimized on my phone it will only keep the originals and it has only been uploading lower resolution versions of my photos to the iCloud library.  Seems to be working in reverse.
    Again these are still in beta so i am hopeful that this will be fixed in the near future.
    I hope this helps.

  • TS4062 My Iphone won't appear in my devices in Itune.... And the WiFi does not work on my phone.... I seems like there is no solution to update my phone to the new ios on my computer or WiFi without using the 3g because of this!!! help me out

    My Iphone won't appear in my devices in Itune.... And the WiFi does not work on my phone.... I seems like there is no solution to update my phone to the new ios on my computer or WiFi without using the 3g because of this!!! help me out

    Hello there, TempestBelcher.
    It seems you've covered all the bases, but feel free to review the iPhone Troubleshooting Assistant for connectivity here:
    Apple - Support - iPhone - Calls Troubleshooting Assistant
    http://www.apple.com/support/iphone/assistant/calls/#section_0
    If you've followed all the instructions then there are a few good recommendations for what to do next in the last step.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • Has anyone a solution to two update having the following popup-"We could not complete your request.  There was an error in the App store.  Please try again later.?"  I've tried over 4 days without any change.

    Has anyone a solution to two update having the following popup-"We could not complete your request".  There was an error in the App store.  Please try again later.  I've tried over 4 days without any change.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • The display on my iPhone only works vertically.  It will not change when I rotate my phone.

    The display on my iPhone only works vertically.  It will not change when I rotate my phone.

    Swipe up on the bottom of the screen to expose control center and see if the orientation lock is on (top row of controls, far right; looks like a lock with a circular arrow).
    Not all apps support orientation changes, BTW.

  • I just updated my phone and it is now stuck with usb cable and itunes logo and itunes on my computer says I have to restore.  Can I get my phone working again without loosing my photos?

    I just updated my phone and it is now stuck with usb cable and itunes logo and itunes on my computer says I have to restore.  Can I get my phone working again without loosing my photos?

    There is no other way than to plug into a computer to restore the phone. You can use another computer to do so, but in case you did not back up to iCloud your data and settings will be gone.
    Follow this article to connect in recovery mode:
    iOS: Unable to update or restore

  • How to deduct working days according to factory calender

    Hi All,
          I have one date and and I want to calculate the exact date before 'N' working days according to the factory calender.
    e.g. Suppose the date is 13.07.2010 and N = 10 then generally we would get date as 03.07.2010.
            But my requirement is that, it should give me the exact date 10 working days back according to the   
            factory calender. i.e. 28.06.2010 .
            Could anybody suggest me a FM or an alternate soln for the same.
    Thanks in anticipation.
    Ubhaka

    Hi Ubhaka,
    have a look at FM
    BUSINESS_DATE_CREATE
    you enter the following:
    - a date (DATUM_EIN), from which you start
    - the number of business days (GESCHAEFTSTAGE)
    - the calendar ID (KALENDER)
    - the direction (RICHTUNG): "-" for subtracting ode "+" for adding the business day based on the calendar
    I suggest you make a copy of the FM and adapt it for your needs.
    Regards,
    Peter

  • Changing working and non-working days

    Hi
    I am trying to make a permanent (default) change in working and non-working days. I am living in Israel and our non-working days are friday and saturday. I want to configure these as the non-working days so I won't need to do it manually via the change work
    time menu.
    Thanks
    Chen

    If you are using project server then you can do it permanent from 
    PWA --> Server Settings --> Enterprise Data --> Enterprise  Calendar then
    You can configure either your stranded calendar or create a new calendar in which you can make Sunday to Thursday as working days and Friday and Saturday as non working days.
    You have to do it manually. There is no tool available which will do the same for you.
    Where as if you are using Microsoft Project professional stand alone then for every plan (MPP file) you have to do it.
    kirtesh

Maybe you are looking for